Cabling / Cards :: Slow / Spiking Internet Speeds With Wired Connection Through D-link WBR-1310 Router
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
ADVERTISEMENT
Nov 20, 2011
I've been having the same issue. I'll start my laptop and it will start connecting to my home network (comcast docsis 3.0 modem to dlink dir 655 router) and be cool upstairs next to the router, but when I move downstairs the speed jumps down from 130 to 117 to 78 to 5.5 mbps. Its holding steady at 117mbps right now. I'm thinking of upgrading my router to a DIR 827 hd media router 2000 so I can get dual coverage and less interference.
View 1 Replies
View Related
Jul 28, 2012
My sister has just purchased a custom built desktop computer that will not connect to the household network. We have various other computers and devices that connect to the router (Thompson Gateway TG782T) without any problems. Just to be sure I've tried reseting the router to factory settings to no avail.
I've tried connecting her computer to the network through the TP-Link Wireless Adpater (TL-WN881ND) that came with her computer AND through a Netgear Wireless USB Adapter (WG111v2). In both situations the network is detected, the network password is requested (and accepted) but the result is always that she has 'limited connectivity', cannot access the internet and cannot detect any shared network drives.
I've tried connecting with an Ethernet cable as well, which her computer does not detect at all ('network cable unplugged').When I try to troubleshoot any of these problems I get a message that says 'The Diagnostics Policy Service is not running'.The guys at the shop where my sister had it built are asking her to bring the computer in with the router becuse they are convinced that the machine is fine, and that the router is at fault. Some Specs for her computer
-------------------
Windows 7 Professional
Service Pack 1
Processor: Intel(R) Core(TM) i-7-3770 CPU @3.40GHz 3.90 GHz
RAM: 16.0 GB[code]....
View 6 Replies
View Related
Nov 28, 2012
I recently installed a new SSD and a fresh windows install.After reinstalling everything,I connected my LAN cable and had issues that it would constantly connect and disconnect.Even the lights on the back were flashing on and off.If it stayed on long enough it would establish a connection. I am using my motherboard build in lan adapter.I have a Asus P8P67 Pro, which has the Intel� 82579, 1 x Gigabit LAN Controller. I was able to establish a connection perfectly fine through my wlan stick.I went to the Asus website and downloaded their drivers for the Lan Controller. This did not fix anything.I attempted numerous install and deinstall of the drivers. At that point I went directly to the Intel website and downloaded their most recent drivers. After installing the Intel drivers, I was able to keep a connection, but it was very very slow.Through Lan connection i am barely able to open up Google, but every time I attempt a speed test, the connection is too slow. Though when I connect through Wlan,I get the full connection speeds.The router I am using is a Netgear DG834G v4. Also tested various cable just incase that might be the issue. Also,when i use the same cable and connect it to my Laptop, I get the full connection and no issues.
View 4 Replies
View Related
Oct 20, 2011
Network Adapter (as displayed in device manager) Realtek PCIe GBE Family Controller (says this device is working properly)I'm running my lan on the integrated network adapter "Realtek PCIe GBE Family Controller" on my motherboard. When I plug in the lan line directly from my router the speed on speedtest.net is around 2 Mbps, i have tested on 2 other computers and they all get around 10 Mbps with the same line. I build this new machine to play games, and sank $800+ on it. I am trying very hard to figure out why my LAN speed is so slow,
View 1 Replies
View Related
Jun 20, 2012
I just bought a used laptop and everything seems to work fine except the wireless. I sometimes can't find networks that I know are there but this can be fixed sometimes by restarting. The biggest problem I have is the internet speeds are really slow. I'm running on an N router and I am only getting about 100kb/s when my other laptop is getting about 600kb/s to 1mb/s. I have no clue what is wrong. I was thinking of trying to change the wireless card but I don't want to be hasty.
View 6 Replies
View Related
Sep 12, 2011
[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
View 4 Replies
View Related
Mar 24, 2011
Router:Dir-655 (Hardware Ver B1;Firmware Ver 2.01Na)
Modem: Motrola SB6120
Cables: Cat 6
Machines: 1. XP SP3 w/d-link DGE-530T desktop; 2. XP Pro SP3 w/dlink DGE-530T desktop; 3. Win7 64 (Latest Drivers)
Problem is that the XP machines can download 25Mbsp on speedtest.net but the Win 7 only manages 5Mbps through dir-655 -- ALL WIRED CONNECTS!. Connect Win 7 directly to modem and d/l is 30Mbps 2 hour Netflex test of wireless indicates good performance. D-Link support had me going in circles for a while until I finally suggested that a firmware update was in order. They assured me that this had been id'd as a problem and that latest firmwire would certainly solve it. It did not.
View 14 Replies
View Related
Jan 5, 2013
Just bought a dir-655, set it up (all though the wizard wasn't working, it kept getting stuck on step 5 of 7) so I just configured everything manually.I'm getting 2.4 MB/s speeds wirelessly.I was expecting much better, my wireless g linksys router did just slightly lower than that. My xbox 360 can't even stream HD without buffering every few mins. It also will just stop, and be unable to see the media for a couple minutes (when doing HD).I have wireless setup as WPA2, and the devices I use wirelessly are N devices. I have the router setup to only use wireless N.
View 14 Replies
View Related
Feb 27, 2012
Okay i just got the DIR-615 N Router and at first i was getting 40 ping on speedtest.net but now I'm getting 360 ping which is really frustrating since i upgraded because my old one was having troubles and also when i get to the check connection in the setup i am getting Your new router does not appear to be connected properly.
View 3 Replies
View Related
May 13, 2012
I'm using the D-link dir-300 wi-fi router. Cable internet connection. PC is connected to the router by the cable and the laptop via wi-fi. Both machines have the same problem - after some time, although there are no package loss when I'm pinging anything, some services report "connection timeout". Such as PvP.net, EA Online and Turbofilm.tv. Soft reset, hard reset didn't solve anything. Although when PC is connected straight to the main internet cable - there are no problems at all. [code]
View 7 Replies
View Related
Feb 7, 2012
I have two routers set up. It goes from the modem through a WRT54G2 to a WNR2000. I have one pc connected to the WRT54G2 that gets 20Mbps and another connected to the WNR2000 thats only getting 5Mbps. I realized recently I have them connected to each other wrong. Or so I assume. I have the fourth port on the WRT54G2 connected to the internet port on the WNR2000 and it's set to "Automatic Configuration - DHCP" and "DHCP Server" is enabled. From what I read one or both of those is supposed to be set to manual.
View 2 Replies
View Related
May 19, 2012
I just bought a 30m CAT6 cable which I installed inside the house, now since my router is on the floor above me I bought a 30m cable to be able to have it downstairs. I don't really know if it has something to do with the PC or if it is the length of the cable that is the problem. But when I try the PC on the main floor the speed is 15-20mbit/s and when I try it on my PC downstairs, all I get is a maximum of 10mbit/s. The strange thing is that ping/jitter is the same both upstairs and downstairs?
View 5 Replies
View Related
Oct 28, 2011
When restarting my PC after a short power failure the D-Link connection wizard autostarts trying to connect to my wlan. After a short while I have a connection and is able to access the internet. The connection wizard, however does not register that a connection has been established and continues to attempt to connect for two minutes, then shuts down and immediately starts for another two-minute try....and so on. If I shut it down it just pops up again.This has never occured before. I run Windows 7 on an HP with an AMD processor.
View 3 Replies
View Related
Jun 29, 2011
We have 3 units of computer in our house uses a router and a 8port switch hub. The unit i am using can connect directly to the internet but cannot be mapped in lan. I tried pinging and i already assigned IP addresses in all units but still nothing happen. I already done format and cloned from the other unit.
View 3 Replies
View Related
Jun 14, 2011
I have the same issue and have been surfing the web for the solution for quite some time. Brand new Sony VAIO laptop with blu-ray has an Intel WiFi bgn 1000 wireless network adapter. It worked fine for couple of days, until i brought it to work. We use wireless connection in our office. Maximum 7 computers are connected at a time. All other 6 laptops connect to our network with no problems (all of them are on win7x64). Now, back to the problem. Wireless works at home and at work in the evening , when no one in the office. I've removed all 3rd party software, uninstalled Intel software. Am using clean driver from the Intel website. Tried different revisions of the driver - issue is still there. I've contacted VAIO support. This is not known issue to them. They offered standard actions (unisntalling the driver, power management options, enabling VAIO Smart Network). No updates of fixes on their support website. I have also checked in the event viewer. There is only one service being enabled and disabled constantly (TCP/IP NetBIOS Helper) - which is happening at the same time with wireless drop. There are about 5-8 drops per minute. Computer browser service disabled. Firewall disabled, antivirus disabled. We assume this could be an interference with mobile diveces. While now, we have disabled all wireless cards on all computers, switched off mobile phones. And... AXAXAXAXA!!! BSOD 0x00000018 (0x000....00, 0xFFFFFA800754A750, 0x00...02, 0xFC01020EFC01020B).
View 5 Replies
View Related
Aug 20, 2012
I have a Windows 7 based Dell computer and it can connect to the wifi but not the internet. I have 2 android phones and ASUS netbook with Windows 7 Starter that have internet access.I've tried the netsh commands as admin. I did download Xirrus WiFi Inspector but it tells me nothing new. I've tried drivers. I did a system restore to a point prior to updates and it worked fine until I installed the new updates. These are my results from the ipconfig command:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersWhatAJoy>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : OwlAlwaysLoveU
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
View 13 Replies
View Related
May 16, 2012
I have my PC connected to the internet by way of a USB WiFi dongle, tapping into the neighbours internet access (with permission).Obviously, this leaves my RJ45 Ethernet connection on the PC, free and unused.I have a CCTV system also, which, if to get the most out of it, requires an internet connection via RJ45 Ethernet.Is it possible to allow my CCTV system access to the internet via Ethernet, connected to my PC, and then using the WiFi dongle access which the PC is already using, also?If so, how would one do this, after physically connecting the Ethernet cable between the PC and the CCTV system DVR?
View 1 Replies
View Related
Jan 17, 2011
Very slow transfer speeds problem with this router. When I put the router in the system, my transfer speeds drop from 12 Mbps to 3 Mbps. I've updated the firmware to the latest version but that doesn't work. The most frequent suggestion is to upgrade the firmware which I have already done.
View 5 Replies
View Related
Feb 15, 2012
Set up my new E4200V2 last night, everything appeared to be working but while streaming videos over wired LAN I get short hiccups over wired. While streaming videos, a few second long pause is really, distracting, this is a deal breaker and my previous router (DIR-655) had no issue streaming any videos. The wiring has not changed, only the router.I set up a ping between two wired linux boxes, and get: [code]
Whoa, 10 ms over gigabit LAN. This is crazy, but doesn't tell us much. The 10 ms was one out of hundreds of pings, so its only intermittent. This might explain the hiccups, but this router doesn't appear to log anything, so its hard to say.Next was scp transfers, which never exceed 15MB/s, in either direction. For gigabit, wired LAN this is awful, with my previous DIR-655 I would get at the very least 40 MB/s, in all situations.Next up, iperf. I set up iperf on the two hosts, and iperf reports reasonable gigabit speeds. [code] Tonight I am thinking of reverting to an old firmware, doing a hard reset and seeing if it persists, and if no ideas come up in this forum, it is getting returned, 15MB/s over gigabit lan is terribly broken.
View 5 Replies
View Related
Dec 27, 2011
Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:
"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."
View 13 Replies
View Related
Dec 27, 2011
i have a dell inspiron mini 10 and i put windows xp pro sp2 on it and got all the neccesary drivers for it the problem with it is that it detects my router and everything but when it tries to connect it gets "stuck" on aquiring network adress i tried the winsock fix and everything but nothing seems to work
View 1 Replies
View Related
Mar 1, 2010
I'm currently subscribed to Comcast's 22/5 Internet service. Internet upload speeds on both wired and wireless are about the same at ~ 5 Mbps. Wireless download speeds range from .5-3 Mbps. Wired or Wireless, I receive LAN speeds of ~32 Mbps or 3-4 MB/s. The noticeable issue is wireless internet download speed. I have tried every configuration possible with my router, updated drivers on devices, firmware and tested everything I could on all PCs, and even used the XBOX 360's media extender network tuning feature as a tool in my investigation to find this bottleneck. All reports point to internet download speed. Again, general LAN and internet upload speeds relatively meet expectations. The wired download speeds are slow at times, but consistently meet expectations.
My current Setup:
Wifi
A4 1.33NA
WPA2 Only - Personal
802.11 Mode : 802.11n only
Channel Width : 40MHz
Channel : 1
[code].....
View 6 Replies
View Related
Sep 9, 2011
My D-link router won't give me a break. Every 10 or 20 minutes it resets, severing the internet connection. This is extremely annoying, especially when I'm playing online games or downloading something. Simply put, the three lights suddenly turn off, then they start turning on again one after the other. I don't want any of the automated answering machines with their usual 'help', like "download update", "contact your ISP","disable your firewall".
View 2 Replies
View Related
Aug 30, 2012
I have 300Mbps PCI wireless LAN network card which I installed in my PC and until today I was connected to my Sky router wirelessly. I also have a wireless Brother all in one connected to the same PCI card.
The engineer who installed my Sky fibre broadband told me in order to achieve maximum speeds I should connect via an ethernet cable to my Sky router as wireless could be a lot slower so I bought one and connected up and disabled the wirelss card. All good so far until I noticed my Brother all in one was complaining about no network ID.
My problem is that I can't seem to run my printer wirelessly as well as run my broadband wired. If I enable the wireless adapter the printer works but my broadband is wireless as well and the wired connection is disabled.
View 5 Replies
View Related
Apr 1, 2013
I have D-link 524 router, my problem is that its signals are not being detected previously it was working fine( the devices we connect are ipad 4, htc wildfire S, nokia e-5 . these devices detect other wifi and connect to them.
View 2 Replies
View Related
Jun 11, 2011
I purchased the D-link DWA-131 wireless adapter about 3 months ago. ever since I got it when using it, the connection will spike to 1000 ping (on any server/web address) about once every 2-3 minutes, I think it might be overheating, but i'm not sure What i've tried already: updating the drivers using both windows zero configuration and the utility that came with the d-link product my old adapter still works correctly (on the same pc, using Zero configuration, same USB port)
[Code]...
View 4 Replies
View Related
Feb 3, 2012
I have a D-Link WBR-1310 modem and for some reason the internet connection drops every 4-5 minutes and then comes back after 30 seconds.I don't know what the problem is. I tried resetting the modem which didn't work. I tried upgrading the firmware from D-Link's website but it says "The version of setting file is not compatible." for the .bin file.
View 5 Replies
View Related
Feb 5, 2011
I have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?
View 9 Replies
View Related
Jan 1, 2011
I have the following equipment/software: Acer Aspire One running Windows XP SP3, Artheros AR5007EG wireless network adapter, Realtek RTL8102E PCI NIC, Cisco Linksys E1000 Router.The Wireless Network Connection status says that I'm connected to my network with a full signal strength but I cannot get out to the internet and I cannot ping the router from that computer. I can, however, get to the internet via a wired connection to the router via the Realtek NIC. This has been the only computer that I've been unable to connect to my network and to the internet. It was connected to a different router before and connected easily but that router went bad so I replaced it with the E1000.Don't know if it's the wireless adapter that's bad or something else.
View 1 Replies
View Related
Oct 26, 2011
I have an hp g62 laptop and it has an Atheros ar9285 wireless adapter and a realtek pci-e ff ethernet adapter. For some reason just recently neither will connect to my netgear cable wifi router. I have two smartphones,xbox and two other laptops that connect with no problem. Everything is configured correctly that i can tell and both drivers have been updated. still nothing, it trys to connect but keeps saying identifying then it says no internet access. also i have disabled firewall and entered the security paraphrase twice just to make sure.
View 1 Replies
View Related
Aug 25, 2012
I just brought this belkin wireless usb adapter N150 and it is giving me slow download speed. I checked on Speedtest.net - The Global Broadband Speed Test and it gives me 0.20 mbps it is not going to the max my max is 3.00 mbps it is not the wireless usb adapter because i checked on another computer and it went to the max 3.00 mbps and i putted it in the same location as my computer so than i realised that it was my computer that is giving slow download speed and it can't find much connections.
View 1 Replies
View Related
Nov 14, 2012
I'm owner of Cisco RV082 router and I have a problem with firewall setup.I would like to deny internet access on port 80 (all sites) for group of users, and allow them internet access for one site by HTTPS (443)After applying rules internet connection is really slow.. Users have to wait something like a 30 sec for a website..I descovered that the reason for slow internet connection is DENY rule. After disbling DENY rule everything works fine..Now I have a few rules added to firewall:
Priority:1 Action: Deny Service: HTTP(80) Source interface: LAN Source:10.82.0.51-10.82.0.245 Destination: Any
Priority:2 Action: Allow Service: HTTPS(443) Source interface: LAN Source: 10.82.0.51-10.82.0.245 Destination: 80.64.59.42
What's wrong with those firewall settings?
View 1 Replies
View Related
