Cabling / Cards :: WNR2000 - Speed Slow Through Second Router?
Feb 7, 2012
I have two routers set up. It goes from the modem through a WRT54G2 to a WNR2000. I have one pc connected to the WRT54G2 that gets 20Mbps and another connected to the WNR2000 thats only getting 5Mbps. I realized recently I have them connected to each other wrong. Or so I assume. I have the fourth port on the WRT54G2 connected to the internet port on the WNR2000 and it's set to "Automatic Configuration - DHCP" and "DHCP Server" is enabled. From what I read one or both of those is supposed to be set to manual.
View 2 Replies
ADVERTISEMENT
Jun 20, 2012
I just bought a used laptop and everything seems to work fine except the wireless. I sometimes can't find networks that I know are there but this can be fixed sometimes by restarting. The biggest problem I have is the internet speeds are really slow. I'm running on an N router and I am only getting about 100kb/s when my other laptop is getting about 600kb/s to 1mb/s. I have no clue what is wrong. I was thinking of trying to change the wireless card but I don't want to be hasty.
View 6 Replies
View Related
Aug 25, 2012
I just brought this belkin wireless usb adapter N150 and it is giving me slow download speed. I checked on Speedtest.net - The Global Broadband Speed Test and it gives me 0.20 mbps it is not going to the max my max is 3.00 mbps it is not the wireless usb adapter because i checked on another computer and it went to the max 3.00 mbps and i putted it in the same location as my computer so than i realised that it was my computer that is giving slow download speed and it can't find much connections.
View 1 Replies
View Related
Jan 24, 2013
On board NIC: Intel 82579V Gigabit Network Controller (asus sabertooth x79 motherboard)I installed the drivers for it from intel's site.f I set link speed to auto (chooses 100mbps full duplex) or 100mbps full or half duplex, any HTTP downloads get slowed to a crawl (30kbps) (steam downloads remain at normal speeds). If I set it to 10mbps full duplex, download speeds jump to normal (500kbps for most HTTP sources)his happens on just this new computer (wired connection), any other computers on the network (wireless) work just fine
View 8 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Nov 28, 2012
I recently installed a new SSD and a fresh windows install.After reinstalling everything,I connected my LAN cable and had issues that it would constantly connect and disconnect.Even the lights on the back were flashing on and off.If it stayed on long enough it would establish a connection. I am using my motherboard build in lan adapter.I have a Asus P8P67 Pro, which has the Intel� 82579, 1 x Gigabit LAN Controller. I was able to establish a connection perfectly fine through my wlan stick.I went to the Asus website and downloaded their drivers for the Lan Controller. This did not fix anything.I attempted numerous install and deinstall of the drivers. At that point I went directly to the Intel website and downloaded their most recent drivers. After installing the Intel drivers, I was able to keep a connection, but it was very very slow.Through Lan connection i am barely able to open up Google, but every time I attempt a speed test, the connection is too slow. Though when I connect through Wlan,I get the full connection speeds.The router I am using is a Netgear DG834G v4. Also tested various cable just incase that might be the issue. Also,when i use the same cable and connect it to my Laptop, I get the full connection and no issues.
View 4 Replies
View Related
Nov 20, 2011
I've been having the same issue. I'll start my laptop and it will start connecting to my home network (comcast docsis 3.0 modem to dlink dir 655 router) and be cool upstairs next to the router, but when I move downstairs the speed jumps down from 130 to 117 to 78 to 5.5 mbps. Its holding steady at 117mbps right now. I'm thinking of upgrading my router to a DIR 827 hd media router 2000 so I can get dual coverage and less interference.
View 1 Replies
View Related
Oct 20, 2011
Network Adapter (as displayed in device manager) Realtek PCIe GBE Family Controller (says this device is working properly)I'm running my lan on the integrated network adapter "Realtek PCIe GBE Family Controller" on my motherboard. When I plug in the lan line directly from my router the speed on speedtest.net is around 2 Mbps, i have tested on 2 other computers and they all get around 10 Mbps with the same line. I build this new machine to play games, and sank $800+ on it. I am trying very hard to figure out why my LAN speed is so slow,
View 1 Replies
View Related
Nov 3, 2011
I'm currently volunteering at a children's group near me. They've just moved offices and are wanting a computer network in place. I have quite a bit of experience with hardware and software troubleshooting, but anything past the server is beyond me.They have a telecommunications box, as many places do, and the box has a set of patch boxes that are, according to the telecommunications people, plugged in and good to go. Each office has tunnelling on the wall with network sockets, again the norm.
View 4 Replies
View Related
Jan 23, 2012
I don't know if this is the right place to ask but pretty sure you'll be able to answer my Q. I have to have my internet router/modem in the kitchen as its the only phone point in my flat currently working, but my partner has to run an ethernet cable down the hall from there to hook up his xbox 360. however, I want to be able to use ethernet for my laptop occasionally to get a better speed then over wireless as the wireless isn't perfect from the room i'm in and wondered what the best way to go about this was. I could also plug in my PS3 if there was a way to get all my devices connecting to the router without too many cables. I've heard of a switch.. what does this do? Or will a simple ethernet connector work for what I wanna do
View 3 Replies
View Related
Jan 1, 2011
I have the following equipment/software: Acer Aspire One running Windows XP SP3, Artheros AR5007EG wireless network adapter, Realtek RTL8102E PCI NIC, Cisco Linksys E1000 Router.The Wireless Network Connection status says that I'm connected to my network with a full signal strength but I cannot get out to the internet and I cannot ping the router from that computer. I can, however, get to the internet via a wired connection to the router via the Realtek NIC. This has been the only computer that I've been unable to connect to my network and to the internet. It was connected to a different router before and connected easily but that router went bad so I replaced it with the E1000.Don't know if it's the wireless adapter that's bad or something else.
View 1 Replies
View Related
Jan 17, 2013
I have received a router from my isp and ive connected that router to my dlink 615 the computer connects to tIhat network but theres "no internet access" and sometimes its taking longer than usual also its showing 2 signals (1 from my og router and the other from the dlink router), also i cannot use my dlink router as the main router cause my phone line is connected to my isps router
View 19 Replies
View Related
May 8, 2011
My problem is that my desk top computer only gets the internet when my modem is plugged into my router and the router plugged into the computer.If i unplug the router and just go modem to computer it tells me its not plugged in.
View 19 Replies
View Related
Jan 28, 2011
I purchased a computer with a pre-installed wireless card which was stated to be b/g/n compatible. When I go to setup a connection to the wireless network (through a Netgear WGR614 v8 router), it has no problem detecting it with a full five bars. However, when it prompts me to enter the password I do, but immediately afterwords another password box appears prompting me to reenter the password again. After repeatedly doing so, it will eventually say the password is incorrect. I know the it is correct because I've since purchased a Netgear USB adapter for temporary purposes and it connects using the password. I've even accessed the router to ensure the password I was using was correct and it is.
View 2 Replies
View Related
Sep 9, 2011
My D-link router won't give me a break. Every 10 or 20 minutes it resets, severing the internet connection. This is extremely annoying, especially when I'm playing online games or downloading something. Simply put, the three lights suddenly turn off, then they start turning on again one after the other. I don't want any of the automated answering machines with their usual 'help', like "download update", "contact your ISP","disable your firewall".
View 2 Replies
View Related
Jan 19, 2013
I am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.
View 4 Replies
View Related
Jul 7, 2011
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router.the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.
[code]...
View 3 Replies
View Related
Apr 1, 2013
I have D-link 524 router, my problem is that its signals are not being detected previously it was working fine( the devices we connect are ipad 4, htc wildfire S, nokia e-5 . these devices detect other wifi and connect to them.
View 2 Replies
View Related
Nov 30, 2012
I have a G router, linksys. I am trying to configure a TiVo N adapter to this router. I have connected the adapter, via an either net connection, to my computer. I have taken the computer off my wireless network. I have opened Explorer and entered the address of the adapter per the TiVo instruction manual. There is supposed to be a setup wizard in the adapter that will start and take me thru the setup of the adapter to my network.
View 3 Replies
View Related
Oct 15, 2011
I live in an apartment building that offers free wi-fi. The connection on my laptop is bad and extremely inconsistent. I was wondering how I could improve this. I was wondering if a usb wireless network adapter would improve my connection.
View 2 Replies
View Related
Feb 5, 2011
I have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?
View 9 Replies
View Related
Aug 15, 2011
I have a printer (epson cx6600) I wanted to connect to our router here so everyone can print to it. It only has a usb connector (which you would typically connect to your pc)... I did notice they have usb to lan cables out there and was going to buy one and connect it to the router that way.
View 1 Replies
View Related
Dec 28, 2011
I have a Netgear ProSafe FVS318 wireless router whose login information I have lost. I have attempted to manually reset it using the reset button on the back, and return it to factory default settings (thus resetting the login information to admin/password).I have checked everywhere, including the documentation for the router itself. I have gotten multiple instructions on how to reset it (generally telling me to hold the button down for anywhere from 10 seconds to 30 seconds until the test light blinks or stays solid and then blinks or stays solid again, or telling me to hold down the button while turning it on). None of these methods have worked. The router still will not reset. It never reboots no matter how long I hold down the button, no matter when I release it, no matter what the orange "test" light is doing, and no matter if I begin with the router on or off. It will not reboot and I still cannot login.
The orange "test" light has behaved the same way each time; after 10 seconds, it turns solid, and then begins blinking before turning back off. After 20 seconds, it turns solid, and then turns off. It does this if I hold the reset button down for 10 seconds, regardless of whether or not I release the button after it first turns solid. If I continue to hold down the reset button, it continues this pattern indefinitely, for as long as the button is held. When I turn the router on, it turns solid before turning off, regardless of whether I am holding the rest button down. Its behavior never deviates from the observed patterns regardless of what I do. At no point has the router ever rebooted on its own.The default login should be admin/password, as this information is included on the bottom of the router, and in its documentation.
View 14 Replies
View Related
Apr 7, 2011
i have beetel adsl2+router connected to my main computer through ethernet cable but its wifi signal is very low. its signal hardly reach the other end of my house where my bedroom is, and i want to surf on my laptop or mobile from my bedroom only so basically i want to extend my wifi range or boost the signal the thing is i have a belkin f7d1301 basic n150 wireless router, i want to know whether i can use it as range extender or any other thing to boost my signal.
View 7 Replies
View Related
Oct 16, 2011
I have recently wiped my hdd and installed WinXp, I use to have vista but a crash occurred. I have WinXP SP3 with a Belkin Connect N150 connected to a Arris Telephony modem from Comcast. My setup use to work on vista. I've ran belkin setup from the disc multiple times and it gets to the part where it says connect and make sure cables are connected. All cables are connected, but my router has a solid amber light. I can access arris through wired internet, but I really want my wireless to work.
View 3 Replies
View Related
Nov 6, 2011
I have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?
View 1 Replies
View Related
Mar 24, 2011
My problem is with xbox live, i have the WNDR 3400 N600 Dual Band Router and i have been experiencing lag spikes since the day i have gotten it. I used to have a wireless adapter and i thought that was the problem so i recently went out and bought a 200 ft ethernet cable so now im hardlined to the router I have the xbox set to highest priority, i have it set with a static ip address for the dmz so i have no restrictions, i have all ports opened just in case, i have great internet speeds : 18.04 mbps download and 4.03 mbps upload and nothing seems to work.. i still have lag that sometimes disconnects me from xbox live and ruins the whole gaming experience.
View 3 Replies
View Related
Sep 8, 2012
I've got on-board LAN but I don't know how to use it. Am I meant to be able to surf the internet just like that if i have got on-board LAN???
View 3 Replies
View Related
Jun 27, 2011
My Internet is down. I appear to be getting power from the modem as all the lights are lit up. I have a wireless router. On my desktop I clicked on the Network icon and it said "3WIRE***" is in range but requires a Network Key (also called a WEP Key or WPA Key)? Could this be the problem? I've never had to enter a password to access my internet before. Do you know how I can find (or reset) my password? It's a D-Link router.
View 2 Replies
View Related
Apr 29, 2012
My hard drive crashed and had to reinstall my OS using manufacturers disk now everything works but the internet, the integrated ethernet card is not listed under network adapters in the device manager, its a clean install of windows xp media center edition 2005 sp2, the device manager shows no drivers missing.
View 5 Replies
View Related
Sep 17, 2012
i am using win7 64 bit on dell n5110 and my lan is not working properly. it wont even detect the cable . when i plug in the cable its like nothing happened. but when i uninstall and reinstall the driver, it sometimes resolves the issue. but i have to do this every time.
View 3 Replies
View Related
Aug 1, 2012
I have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
View 3 Replies
View Related
Jul 6, 2012
I have network: 20 PC's conected to a switch (ordinary switch), from switch to a router (for DHCP and internet conection), Router is connected to a cable modem.
Lately an issue arised. One PC started having problem witch connection (PC is windows 7, up to date). PC instead of 192 addres is getting 169 (i need to highlight it is a problem with only one PC). That means the PC is connected to the Router but it is not getting proper IP addres. After changig the addres to static the connection ws fine for few days and then in networc connection icon (botom right) it came up with 'unidentified network' message. I changed the patchleeds, even changed the connection with known working line (from outlet to patchpanel) and the connection was coming and going. Then I changed network card with the same resoult. I noticed strange thing: While the IP is 169 or when 'unid net' when I unplug the cable from outlet then plug back and do so couple times in one moment the connection is back and stable but only for some period of time. Cables had been re terminated with new jacks and at the patch panel. Drivers for network card are up to date.
Why is the connection coming and going?
View 3 Replies
View Related
