My Internet is down. I appear to be getting power from the modem as all the lights are lit up. I have a wireless router. On my desktop I clicked on the Network icon and it said "3WIRE***" is in range but requires a Network Key (also called a WEP Key or WPA Key)? Could this be the problem? I've never had to enter a password to access my internet before. Do you know how I can find (or reset) my password? It's a D-Link router.
View 2 RepliesMy computer cannot find my Rosewill N PCI Adapter RNX-N360PC. I have used multiple slots on the motherboard, tried two adapters, and have reinstalled the software. the problem with software installation is that it cannot be installed because the computer can't find a driver. When i troubleshoot my internet connection, or my lack thereof, the problem is that "there is no adapter." How can i fix this?
View 1 Replies View RelatedI recently installed the above wireless card, but I can't get it to work. Under the Device Manager, it has this error:This device cannot find enough free resources that it can use. (Code 12)If you want to use this device, you will need to disable one of the other devices on this system.I've tried updating the driver, and disabling the little USB wireless device I was using before, but I still can't seem to get it working. [code]
View 9 Replies View RelatedI already have one 2x8pin PCI express power cable powering a GTX280 (along side its 6x6 pin cable). It has two male 8 pin ends (One is 6+2, the other is just 8).
I want to install my second GTX280 too but I only have a 6x6pin cable. I need a 8x8 aswell. The GTX280 requires one 6x6 and one 8x8 output. Where do I find one?
I CANNOT FIND ANOTHER 8+8 PCI EXPRESS CABLE ANYWHERE IN THE WORLD. Not EBAY, not any website on earth. Not my retailer or producer. ?
How else can i power the card properly? My PSU has no molex options. My PSU only accepts PCI express 2.0. My PSU is Everest 1200w with 4 of each type of socket.
I recently performed a windows 7 update and when I opened my computer the next morning, the wifi wouldn't work. All the other computers in the house work, but this one. The switch is turned on, have checked device manager and NOTHING is listed there. The green light won't even come on when the switch is activated. I am not computer literate, but have resorted to everything except cleaning the system and rebooting. I am currently using a usb wifi adapter?
View 5 Replies View Relatedi am having a problem with my desktop right now, just recently i re-installed Windows7, a clean format... but then i suddenly noticed that i cant connect to the internet, no network adapters are detected on the Network Connections, its empty i looked at the Device Manager and saw a yellow warning on realtek rtl8139/810x family fast ethernet nic, i download the driver using my laptop (wireless connection)... and installed that driver on my desktop pc then checked the device manager once again, but it still has a yellow warning.i dont know what to do anymore, and at the last screenshot theres this error message: This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system.i have two lan cards, one at the motherboard(not in use) and the other PCI-E lan card (tp-link ) ...im just wondering if that Realtek i just installed is the lan driver for the motherboard?
View 2 Replies View RelatedI've got on-board LAN but I don't know how to use it. Am I meant to be able to surf the internet just like that if i have got on-board LAN???
View 3 Replies View RelatedMy hard drive crashed and had to reinstall my OS using manufacturers disk now everything works but the internet, the integrated ethernet card is not listed under network adapters in the device manager, its a clean install of windows xp media center edition 2005 sp2, the device manager shows no drivers missing.
View 5 Replies View Relatedi am using win7 64 bit on dell n5110 and my lan is not working properly. it wont even detect the cable . when i plug in the cable its like nothing happened. but when i uninstall and reinstall the driver, it sometimes resolves the issue. but i have to do this every time.
View 3 Replies View RelatedI have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
View 3 Replies View RelatedI have network: 20 PC's conected to a switch (ordinary switch), from switch to a router (for DHCP and internet conection), Router is connected to a cable modem.
Lately an issue arised. One PC started having problem witch connection (PC is windows 7, up to date). PC instead of 192 addres is getting 169 (i need to highlight it is a problem with only one PC). That means the PC is connected to the Router but it is not getting proper IP addres. After changig the addres to static the connection ws fine for few days and then in networc connection icon (botom right) it came up with 'unidentified network' message. I changed the patchleeds, even changed the connection with known working line (from outlet to patchpanel) and the connection was coming and going. Then I changed network card with the same resoult. I noticed strange thing: While the IP is 169 or when 'unid net' when I unplug the cable from outlet then plug back and do so couple times in one moment the connection is back and stable but only for some period of time. Cables had been re terminated with new jacks and at the patch panel. Drivers for network card are up to date.
Why is the connection coming and going?
I'm currently volunteering at a children's group near me. They've just moved offices and are wanting a computer network in place. I have quite a bit of experience with hardware and software troubleshooting, but anything past the server is beyond me.They have a telecommunications box, as many places do, and the box has a set of patch boxes that are, according to the telecommunications people, plugged in and good to go. Each office has tunnelling on the wall with network sockets, again the norm.
View 4 Replies View RelatedI have found a great application that allows your PC to become a hotspot. It can also protect the wi-fi. Now remember whatever its your backend on the PC is what kind of network and speed you get such as, if my desktop connected through ethernet and I install the virtual router on the desktop than my laptop can connect to it depending on my Wi-Fi adapter on it. It could be B/G/N. B and G gives 54MBPS and N gives me 65MBPS.
View 1 Replies View RelatedCan I use ONE wireless usb adapter for two computers? Of course not at the same time but I was wondering if it is possible? Also, do I need to have the disc to install it or will the 2nd computer I want to use the wireless usb adapter for prompt me to install the software when I put it in the usb drive? I have misplaced the cd the usb adapter came with which is why I am askinit is a laptop and I know I can use ad hoc but I am trying to set up wireless on that laptop without ad hoc.
View 2 Replies View Relatedmy acer cannot detect any wifi and also dont have network adapter
View 1 Replies View RelatedI have this phone that was working fine until a friend moved a desk and positioned on top of the cable the goes from the phone to the jack, he did it without knowing it.So we took the cable we went to the store a bought a cable for phone with only one pair of wire, we connected it and it did not get any line tone.I did notice the old cable have two pair of wire.But this is an office phone with two line number so at least one should be working right? I just realize this now.
View 6 Replies View RelatedA few weeks ago, i noticed that my desktop was unable to access the internet, even though it shows that it is connected. i eventually decided taht it must have been a hardware issue, so i bought a new motherboard. after installing the motherboard, an a fresh installation on Windows, i saw after the drivers were installed that the same thing was happening. I pinged sites, and i got no losses on data. i also did a tracer, and it showed me that it is in fact connecting.
I noticed that when I connect the pc to the network(it is always via cable) it recognizes the network as "network", whereas if i use the same connection for my laptop, it brings up the network as "NETGEAR", which is, in fact, my network's name.
I just need to add new connectors and I'm good to go. The PCs have cabinets with Ethernet sockets in them and these will also need re-wiring with a RJ45 jack then a faceplate mounting as they are totally bare at the minute.Also, I think I need to learn this as a whole, it will become a regular thing, do I need the following tools to do the basics of cabling ?RJ45 Network Crimp Tool 10 Boots & Ends Crimping Kit Play.com - Buy RJ45 Network Crimp Tool 10 Boots & Ends Crimping Kit online at Play.com and read reviews. Free delivery to UK and Europe!|cat:3516420|prd:3516420[CODE]
View 5 Replies View Relatedi have 2 laptop with wifi and ethernet and a pc with ethernet. so can i connet these 3 together in this condition: first laptop to second laptop with wifi, and second laptop to pc with wire. so i can play game 3 together or connect internet all to one internet and etc...can the second laptop be server?i dont have hub, router and adapter. i have only cable.
View 3 Replies View RelatedI'm installing a wired network in the office, going to upgrade from a cat 5 to a cat 6. My question is cat 6 cables clipped same as cat 5 using same rj45 clips? And is coloring same, am going wg-g wo-b wb-o wbr-br.
View 1 Replies View RelatedI want to add a new phone line to a small office in a hotel. They have avaya phone system and they are currently using 6 or 7 phone lines. From the avaya wires are run to the 66 block and from there to the outlets. So i think i can connect a cable from the avaya to the 66 block and it automaticaly give an extension number, but how do i add a phone line number to that connection?
View 5 Replies View RelatedI have a wave spot controller. That is connected to my PC(Fedora 14). In Shell I'm < arp -n > then I'm getting "Incomplete" in the place of Hardware Address.
View 1 Replies View RelatedI keep getting a 50% loss on one workstation. I tried switching out the network card and that seems to have resolved the issue... Do network cards exhibit strange behavior when they fail or am I overlooking a deeper issue?
View 1 Replies View RelatedI have a fee pcs at home...all are able to connect to the internet but theres only one thats not able to...the network and connection centre keeps and changing from identifying to not connected. The cable itself is fine.
View 13 Replies View RelatedHaving real problems setting up a USB NAS driver adapter. I bought this adapter here: USB NAS Adapter for HDD Caddy UPNP Printer Server SAMBA | eBay
I have plugged it into my router via the ethernet cable provided, then I login to my router via [url]... and check for the attached devices - I can't see the USB adapter showing up. My router is: F@ST2504n. Is there something I need to do first to make it show up?
I can open files, play videos, run programs, etc. Windows installed without a problem.However, I can't connect to the Internet. At all. I can't even register my version of Windows because I can't contact Microsoft for verification, because the connection won't get through. No Internet devices can be detected.That was with a long cable wired directly to our router, which is next to our modem.So, today, I bought a D-Link Xtreme N Desktop PCI adapter to connect. Still no connection... I don't think the PC even detects the adapter, because the drivers coming with the adapter can't detect it, and the light on the adapter doesn't turn on.That shouldn't happen. Both the cable and adapter go directly into the motherboard. My operating system is Windows 7 Ultimate 64-Bit, and my motherboard is an Asus P8Z68-V PRO.My ISP is Cogeco. All other computers and wireless devices in the house work perfectly fine.
View 2 Replies View RelatedMy acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter.
View 1 Replies View RelatedI might fancy having my desktop stay in a sleep state, waking whenever I need to access it for a file or something, so I tried to use WOL. The nic and bios support it, however when I enable it...
The machine only stays off off for 5-10 seconds at a time. I think this is because instead of waking from only a magic packet, it is waking from ANY packet.
I have acer laptop with xp and must do enable my lan card to open conection in devices manager.every reboot the lan conection is disabled.for information I delete a virus pum bad proxy with malwarebytes before I have a problem know ervery thing is ok without virus.
View 6 Replies View RelatedI am using a proxy server with 2 NICs for sharing internet connection to my 100 desktop users in my office. NIC 1 is connected to my dsl modem and NIC 2 is connected to a main switch and further to more. But now i want to setup a wifi network for laptop users. I have enabled ICS on NIC 1 and NIC 2 has acquired it ip automatically (192.168.0.1) so the gateway for my desktop users is (192.168.0.1). But i want to use a new gateway. For this i have installed NIC 3 but it is not acquiring the ip automatically. My Proxy server configuration is: MS Server 2003 ENT edition.
View 2 Replies View RelatedDriver software is from 2009 and it says there are no updates found,. RALINK TECH. CORP is the manufacturer and microsoft is the driver supplier, although neither website has anything for my piece of equipment (i have installed updates from both of them and my driver software is the same as before). How do I find updates for these drivers? When I search online all I get is driver update programs that cost money to use.
View 3 Replies View RelatedWe're planning to install 24 strand singlemode fiber optic cable in three ocations. What is the best way to run the cables between the 3 locations. Location 1 is in the south, 2 is in the middle and 3 is in the north pretty much in a straight line.Should we run one fiber optic cable from location 1 to location 2 and another fiber optic cable from location 1 to location 3 or is there a better way? Maybe we can run from 1 to 2, 2 to 3 so that location 2 acts like a hub.Is there a way to just run one fiber optic cable from location 1 to 3 and along the way somehow splice that cable to go to location 2
View 1 Replies View RelatedI just got a new laptop. Like, just yesterday, but for some odd reason it can't connect to the internet in the living roomMore Info:Laptop bought yesterday. Absolutely new. Samsung, A6 Vision, Windows 7. It can hold to 480GB I think or at least around and has 6GB Ram. I brought it home, made the default brower Google Chrome and connected it to the home internet and entered in the security key/password, so it's all connected. IN the living room, the connection is really good. All the other laptops there -even my really bad old one can connect fine to the internet. My new one says it's connected, but no internet. But since the other ones get internet, I don't think I need to restart the router -although I did so anyways and it didn't work
View 1 Replies View Related