Having real problems setting up a USB NAS driver adapter. I bought this adapter here: USB NAS Adapter for HDD Caddy UPNP Printer Server SAMBA | eBay
I have plugged it into my router via the ethernet cable provided, then I login to my router via [url]... and check for the attached devices - I can't see the USB adapter showing up. My router is: F@ST2504n. Is there something I need to do first to make it show up?
I have a wave spot controller. That is connected to my PC(Fedora 14). In Shell I'm < arp -n > then I'm getting "Incomplete" in the place of Hardware Address.
View 1 Replies View RelatedI have been trying to re-establish my wi-fi connection for over a day now. I have a Dell Inspiron 1545 with windows 7 and it has two wifi adapters, one is the 1397wlan and the other is a virtual miniport adapter. My carrier is at&t uverse/2wire and my service was disconnected for about eight or nine days and since then I cannot get my wi-fi back. The desktop computer works fine but my network adapters are showing attempting to authenticate and not connected for the miniport adapter. I have tried enable/disable, restoring to a previous date, ipconfig/release, and of course running the trouble shooter for Microsoft. The result is that they can't assist with my connectivity issue and that its either the adapter or my router. I can use the laptop with the ethernet cord but its not practical as the router is downstairs and I primarily work upstairs.
View 2 Replies View Relatedhave had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.
View 2 Replies View RelatedI've got on-board LAN but I don't know how to use it. Am I meant to be able to surf the internet just like that if i have got on-board LAN???
View 3 Replies View RelatedMy Internet is down. I appear to be getting power from the modem as all the lights are lit up. I have a wireless router. On my desktop I clicked on the Network icon and it said "3WIRE***" is in range but requires a Network Key (also called a WEP Key or WPA Key)? Could this be the problem? I've never had to enter a password to access my internet before. Do you know how I can find (or reset) my password? It's a D-Link router.
View 2 Replies View RelatedMy hard drive crashed and had to reinstall my OS using manufacturers disk now everything works but the internet, the integrated ethernet card is not listed under network adapters in the device manager, its a clean install of windows xp media center edition 2005 sp2, the device manager shows no drivers missing.
View 5 Replies View Relatedi am using win7 64 bit on dell n5110 and my lan is not working properly. it wont even detect the cable . when i plug in the cable its like nothing happened. but when i uninstall and reinstall the driver, it sometimes resolves the issue. but i have to do this every time.
View 3 Replies View RelatedI have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
View 3 Replies View RelatedI have network: 20 PC's conected to a switch (ordinary switch), from switch to a router (for DHCP and internet conection), Router is connected to a cable modem.
Lately an issue arised. One PC started having problem witch connection (PC is windows 7, up to date). PC instead of 192 addres is getting 169 (i need to highlight it is a problem with only one PC). That means the PC is connected to the Router but it is not getting proper IP addres. After changig the addres to static the connection ws fine for few days and then in networc connection icon (botom right) it came up with 'unidentified network' message. I changed the patchleeds, even changed the connection with known working line (from outlet to patchpanel) and the connection was coming and going. Then I changed network card with the same resoult. I noticed strange thing: While the IP is 169 or when 'unid net' when I unplug the cable from outlet then plug back and do so couple times in one moment the connection is back and stable but only for some period of time. Cables had been re terminated with new jacks and at the patch panel. Drivers for network card are up to date.
Why is the connection coming and going?
I'm currently volunteering at a children's group near me. They've just moved offices and are wanting a computer network in place. I have quite a bit of experience with hardware and software troubleshooting, but anything past the server is beyond me.They have a telecommunications box, as many places do, and the box has a set of patch boxes that are, according to the telecommunications people, plugged in and good to go. Each office has tunnelling on the wall with network sockets, again the norm.
View 4 Replies View RelatedI have found a great application that allows your PC to become a hotspot. It can also protect the wi-fi. Now remember whatever its your backend on the PC is what kind of network and speed you get such as, if my desktop connected through ethernet and I install the virtual router on the desktop than my laptop can connect to it depending on my Wi-Fi adapter on it. It could be B/G/N. B and G gives 54MBPS and N gives me 65MBPS.
View 1 Replies View RelatedCan I use ONE wireless usb adapter for two computers? Of course not at the same time but I was wondering if it is possible? Also, do I need to have the disc to install it or will the 2nd computer I want to use the wireless usb adapter for prompt me to install the software when I put it in the usb drive? I have misplaced the cd the usb adapter came with which is why I am askinit is a laptop and I know I can use ad hoc but I am trying to set up wireless on that laptop without ad hoc.
View 2 Replies View Relatedmy acer cannot detect any wifi and also dont have network adapter
View 1 Replies View RelatedI have this phone that was working fine until a friend moved a desk and positioned on top of the cable the goes from the phone to the jack, he did it without knowing it.So we took the cable we went to the store a bought a cable for phone with only one pair of wire, we connected it and it did not get any line tone.I did notice the old cable have two pair of wire.But this is an office phone with two line number so at least one should be working right? I just realize this now.
View 6 Replies View RelatedA few weeks ago, i noticed that my desktop was unable to access the internet, even though it shows that it is connected. i eventually decided taht it must have been a hardware issue, so i bought a new motherboard. after installing the motherboard, an a fresh installation on Windows, i saw after the drivers were installed that the same thing was happening. I pinged sites, and i got no losses on data. i also did a tracer, and it showed me that it is in fact connecting.
I noticed that when I connect the pc to the network(it is always via cable) it recognizes the network as "network", whereas if i use the same connection for my laptop, it brings up the network as "NETGEAR", which is, in fact, my network's name.
I just need to add new connectors and I'm good to go. The PCs have cabinets with Ethernet sockets in them and these will also need re-wiring with a RJ45 jack then a faceplate mounting as they are totally bare at the minute.Also, I think I need to learn this as a whole, it will become a regular thing, do I need the following tools to do the basics of cabling ?RJ45 Network Crimp Tool 10 Boots & Ends Crimping Kit Play.com - Buy RJ45 Network Crimp Tool 10 Boots & Ends Crimping Kit online at Play.com and read reviews. Free delivery to UK and Europe!|cat:3516420|prd:3516420[CODE]
View 5 Replies View Relatedi have 2 laptop with wifi and ethernet and a pc with ethernet. so can i connet these 3 together in this condition: first laptop to second laptop with wifi, and second laptop to pc with wire. so i can play game 3 together or connect internet all to one internet and etc...can the second laptop be server?i dont have hub, router and adapter. i have only cable.
View 3 Replies View RelatedI'm installing a wired network in the office, going to upgrade from a cat 5 to a cat 6. My question is cat 6 cables clipped same as cat 5 using same rj45 clips? And is coloring same, am going wg-g wo-b wb-o wbr-br.
View 1 Replies View RelatedI want to add a new phone line to a small office in a hotel. They have avaya phone system and they are currently using 6 or 7 phone lines. From the avaya wires are run to the 66 block and from there to the outlets. So i think i can connect a cable from the avaya to the 66 block and it automaticaly give an extension number, but how do i add a phone line number to that connection?
View 5 Replies View RelatedI keep getting a 50% loss on one workstation. I tried switching out the network card and that seems to have resolved the issue... Do network cards exhibit strange behavior when they fail or am I overlooking a deeper issue?
View 1 Replies View RelatedI have a fee pcs at home...all are able to connect to the internet but theres only one thats not able to...the network and connection centre keeps and changing from identifying to not connected. The cable itself is fine.
View 13 Replies View RelatedI can open files, play videos, run programs, etc. Windows installed without a problem.However, I can't connect to the Internet. At all. I can't even register my version of Windows because I can't contact Microsoft for verification, because the connection won't get through. No Internet devices can be detected.That was with a long cable wired directly to our router, which is next to our modem.So, today, I bought a D-Link Xtreme N Desktop PCI adapter to connect. Still no connection... I don't think the PC even detects the adapter, because the drivers coming with the adapter can't detect it, and the light on the adapter doesn't turn on.That shouldn't happen. Both the cable and adapter go directly into the motherboard. My operating system is Windows 7 Ultimate 64-Bit, and my motherboard is an Asus P8Z68-V PRO.My ISP is Cogeco. All other computers and wireless devices in the house work perfectly fine.
View 2 Replies View RelatedMy acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter.
View 1 Replies View RelatedI might fancy having my desktop stay in a sleep state, waking whenever I need to access it for a file or something, so I tried to use WOL. The nic and bios support it, however when I enable it...
The machine only stays off off for 5-10 seconds at a time. I think this is because instead of waking from only a magic packet, it is waking from ANY packet.
I have acer laptop with xp and must do enable my lan card to open conection in devices manager.every reboot the lan conection is disabled.for information I delete a virus pum bad proxy with malwarebytes before I have a problem know ervery thing is ok without virus.
View 6 Replies View RelatedI am using a proxy server with 2 NICs for sharing internet connection to my 100 desktop users in my office. NIC 1 is connected to my dsl modem and NIC 2 is connected to a main switch and further to more. But now i want to setup a wifi network for laptop users. I have enabled ICS on NIC 1 and NIC 2 has acquired it ip automatically (192.168.0.1) so the gateway for my desktop users is (192.168.0.1). But i want to use a new gateway. For this i have installed NIC 3 but it is not acquiring the ip automatically. My Proxy server configuration is: MS Server 2003 ENT edition.
View 2 Replies View RelatedDriver software is from 2009 and it says there are no updates found,. RALINK TECH. CORP is the manufacturer and microsoft is the driver supplier, although neither website has anything for my piece of equipment (i have installed updates from both of them and my driver software is the same as before). How do I find updates for these drivers? When I search online all I get is driver update programs that cost money to use.
View 3 Replies View RelatedWe're planning to install 24 strand singlemode fiber optic cable in three ocations. What is the best way to run the cables between the 3 locations. Location 1 is in the south, 2 is in the middle and 3 is in the north pretty much in a straight line.Should we run one fiber optic cable from location 1 to location 2 and another fiber optic cable from location 1 to location 3 or is there a better way? Maybe we can run from 1 to 2, 2 to 3 so that location 2 acts like a hub.Is there a way to just run one fiber optic cable from location 1 to 3 and along the way somehow splice that cable to go to location 2
View 1 Replies View RelatedI just got a new laptop. Like, just yesterday, but for some odd reason it can't connect to the internet in the living roomMore Info:Laptop bought yesterday. Absolutely new. Samsung, A6 Vision, Windows 7. It can hold to 480GB I think or at least around and has 6GB Ram. I brought it home, made the default brower Google Chrome and connected it to the home internet and entered in the security key/password, so it's all connected. IN the living room, the connection is really good. All the other laptops there -even my really bad old one can connect fine to the internet. My new one says it's connected, but no internet. But since the other ones get internet, I don't think I need to restart the router -although I did so anyways and it didn't work
View 1 Replies View RelatedMy previous wireless card was D-Link brand, and worked great. I never ever had trouble with connecting, never had to think about it or mess with any software. It always ran silently in the background, and connected automatically without fail. The card got damaged when I moved my computer, so I bought this T-LINK brand because it had good reviews.First I installed it from the CD the recommended way--with drivers and software. It was able to connect after some fiddling around, but then it would periodically disconnect. The problem seems to happen every 10 minutes or so, or whenever I open a game or program (like Steam), or google chrome/internet explorer, anything that requires internet usage. Sometimes it would give me an error about the settings of the card not being the same as the network settings. I think I fixed that, and still it had the same problem (it should have automatically detected the settings though).
The only way to restart it was to unplug the card, wait 10 seconds, plug it back in, or to restart my computer. However, it would soon DC again. When it does so, its like the card just goes to sleep -- no more blinking green light. Also, I made sure that the drivers that came on the installation CD are current (which they are). Eventually, after playing with settings to no avail, I uninstalled drivers and software and then restarted my computer, then reinstalled just the drivers.At first it was unable to connect, but after moving the stand to a different USB slot, then refreshing my IP through cmd, it did connect. It then DCed once on its own. I was able to get it back up after pulling the card out of the USB stand and plugging it back in. Since then it has not DCed, but I am not holding my breath.
First I have to say, I absolutely hate the program that came with it. Windows does everything the program does, except 100% better. I am not surprised that its not DCing as much with just the drivers.Ah, I spoke too soon. While writing this post, I attempted to open a new tab in google and it temporarily DCed me five times in a row. Specifically, there is a little yellow triangle over a 5-bars good signal. Says it is connected (limited connectivity). This time, the little green light stays blinking. It eventually re-connected itself each time on its own (maybe when the IP refreshed itself?). Each time it happened I was trying to use google searchThe 6th time I was in the middle of watching a video on youtube (not sure it makes a difference). The DCing seems to happen a lot more when I am actually using the connection. Sometimes I cannot load a web page even when it
says I am "connected"[CODE]
I have a Dell laptop with a Wireless-G modem built in. Is there any point in getting a USB Wireless-N modem to speed up the overall connection? I don't know if my Cox cable modem service is even fast enough for it to matter.
View 4 Replies View RelatedI have my boss's (president of the company) laptop, wired LAN port, setup with a static ip so his laptop will bypass his company's web filter, and was going to let him use the wireless for home and travel. However, what if he needs to use his LAN port on a different network that doesn't support the ip's of our company's network? I need to see if there is a way, utility, or something that can be done to allow him to have a static ip assigned to that port and use DHCP (for when he is on other networks) so he can bypass the web filter.
I have a rule on the FW to allow his static ip to bypass the web filter. I have tried the alternate configuration inside XP and editing the registry to assign that nic dual ips, but I still get blocked on the filtered webpages. For now I have just emailed him the steps on how to switch it manually.