Cabling / Cards :: Can't Connect To Internet After Removing Virus Windows XP 2012 Security
Feb 4, 2012
1) I had Windows XP 2012 Security virus that I removed. The antivirus software also removed afs.sys and afs.reg file, that I repalced from backup. I also copied and merged afs.reg Doing this got me an ipaddress for my PC.
2) I can not connect my wired desktop to the Internet. I can ping the ip address of google.com but not the url. I can also not ping ip address of netgear.com. My laptop has no problem connecting to the wireless network.
3) I ran Winsockxpfix and flushed dns and no luck. [code]
After getting virus and cleaning the system as requested, including all of the registry items not required, I have been unable to get onto the internet.Bad Image Error.I have a Mesh PC, running XP SP3.The motherboard is MS-7207 ver2.I've tried reinstalling the ethenet drivers but to no avail.I can see the network adapter in the control panel and it says the drivers are installed OK.The green light comes on when the cable is plugged in but not the yellow data lamp.I have a second hard drive from an old PC that I reinstalled windows on booted from, I updated the drivers and successfully connected to the internet, which proves all the hardware and drivers do work, but just not on my main hard drive containing my proper windows install.I'm logging this fault on my work laptop as its the only way I can get on line. (My work laptop works at home over the same broadband connection I have used previously.
I encountered a similar problem of no internet after virus removal.
a) IE shows "Internet Explorer cannot display the webpage" b) MSN and Skype do not seem to respond as well c) My laptop is connected to a router and I'm able to access other PC on the LAN, but not anything requires internet access d) The LAN icon on the taskbar shows my PC is connected to both the router and the internet (but internet just somehow doesnt work) e) Proxy option isn't enabled f) Booted my Win Vista in Safe Mode with Networking, internet doesnt work as well g) output from ipconfig seems ok; able to ping gateway ip h) checked the list of network services posted on this thread; they're all started i) Removed my antivirus program and disabled windows firewall; to no avail as well j) MSN repair suggests that there's firewall/ dns issue that causes MSN couldnt connect k) Both wired and wireless connections used to work; but both not working now l) Other PCs on the LAN are able to connect to internet
I have a Windows 7 based Dell computer and it can connect to the wifi but not the internet. I have 2 android phones and ASUS netbook with Windows 7 Starter that have internet access.I've tried the netsh commands as admin. I did download Xirrus WiFi Inspector but it tells me nothing new. I've tried drivers. I did a system restore to a point prior to updates and it worked fine until I installed the new updates. These are my results from the ipconfig command:
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved.
I have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
I have a fee pcs at home...all are able to connect to the internet but theres only one thats not able to...the network and connection centre keeps and changing from identifying to not connected. The cable itself is fine.
I can open files, play videos, run programs, etc. Windows installed without a problem.However, I can't connect to the Internet. At all. I can't even register my version of Windows because I can't contact Microsoft for verification, because the connection won't get through. No Internet devices can be detected.That was with a long cable wired directly to our router, which is next to our modem.So, today, I bought a D-Link Xtreme N Desktop PCI adapter to connect. Still no connection... I don't think the PC even detects the adapter, because the drivers coming with the adapter can't detect it, and the light on the adapter doesn't turn on.That shouldn't happen. Both the cable and adapter go directly into the motherboard. My operating system is Windows 7 Ultimate 64-Bit, and my motherboard is an Asus P8Z68-V PRO.My ISP is Cogeco. All other computers and wireless devices in the house work perfectly fine.
I just got a new laptop. Like, just yesterday, but for some odd reason it can't connect to the internet in the living roomMore Info:Laptop bought yesterday. Absolutely new. Samsung, A6 Vision, Windows 7. It can hold to 480GB I think or at least around and has 6GB Ram. I brought it home, made the default brower Google Chrome and connected it to the home internet and entered in the security key/password, so it's all connected. IN the living room, the connection is really good. All the other laptops there -even my really bad old one can connect fine to the internet. My new one says it's connected, but no internet. But since the other ones get internet, I don't think I need to restart the router -although I did so anyways and it didn't work
After pconfig /renew (I get this error) No operation can be performed on pth while it has its media disconnected. An error occurred while renewing interface local area connect an operation was attempted on something that was not a socket.
I am also trying to wipe it but no not have XP disc and no one I know does either so what is the safest way?
We have 3 units of computer in our house uses a router and a 8port switch hub. The unit i am using can connect directly to the internet but cannot be mapped in lan. I tried pinging and i already assigned IP addresses in all units but still nothing happen. I already done format and cloned from the other unit.
i bought a netgear for my laptop and when trying to connect to it,i get through the connections to the setup and then it says that it detects a static ip address.
I can connect to the internet using my neighbors wireless router but when I try to use my ethernet cable it connects me to "network 16" but the internet doesnt work. Ive tried different cables and different wall ports and that didnt work. It has been working before but I disconnected it to go somewhere and when I came back I had this problem. I use Windows 7 and Im trying to connect using Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller.
i reformatted my computer 1 month ago, when i try to connect with ethernet cable it doesn't connect, but when i use the usb cable which i got with my modem it connects.btw i have a acer e389 which runs on XP(media center).
Ive been using an Ethernet cable to connect to the Internet for a while now, it was working fine up to yesterday where I left my desktop open for a few hours and came back to find that I have no Internet connection.
I used my laptop to test the cable out and it works fine, the wireless works fine too. There doesnt seem to be anything wrong with the modem since I still have Internet on the PS3. I used a different cable to test the modem again with my laptop and I had internet access. The desktop is still connected to the modem but it only gives me a network connection with no Internet.
I tried restarting the modem but it still wouldnt work and I also tried to disable then enable the connection.
Im using Realtek PCIe GBE Family Controller with the latest driver.
I'm having to use my desktop because my laptop(Toshiba Sattelite...runs on Windows 7) now has NO CONNECTIVITY. It goes from "Limited" to "No" connectivity. I have it hooked directly up the router now and NOTHING. I'm not sure of what to do. The command prompt doesn't work. I typed "ipconfig /all" then the next command was "ipconfig /release" and I got three lines of errors. DHCP is enabled only under the "I-E NIC" Everywhere else it is not enabled. When I hover my mouse over the bars at the far right of the status bar it says my wifi name and under it says "no internet access," HOWEVER, when I click on it...my wifi name is at the top and it says in bold letters CONNECTED.
I am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:
"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."
have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.
Everytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.
I walked in to the room and my 1 year old daughter was carrying my laptop. I turned it on and now I no longer have the option to connect to wireless networks. It's like the computer doesn't recognize a wireless card. I have an old dell with windows xp. At first thought I figured that she may had dropped it and dislodged the card, so I took the cover of the slot off and everything seems to be in place. The wireless card is a broadcom.
I was wondering what kind of wireless network adapter stick I should get for my windows 7 computer? My older one somehow had issues (device was not recognized or whatever)
my specs are:[CODE]After i re-installed win 7 home premium 64 bit edition i've managed to install successfully the Realtek PCIe GBE driver but when i connect the router directly to the laptop i got no internet.Meanwhile windows did not recognized the WiFi network card Atheros 9285.i tried diffrent driver and though it had been installed, in Device manager i only see "Bluetooth generic module" and in the "change adapter setting" i only have Local Area Connection.
I have an asus K52f laptop running windows 7, and i cant connect to my schools wifi router, some Cisco model. However i can connect with my iTouch and most apple computers can connect. My friend who has an HP on Win7 was able to connect. I asked him how and he said something about changing the properties of the network card so it was on cisco. Im not sure what he meant, and when he tried on my computer he said i needed to update the card something
Perhaps once a week my ethernet port stops working. That is, it is still displayed as 'working properly' in the device management screen, but it is unable to connect to dns. System restore does not solve this problem. plugging the ethernet cable in and out (10 times) does not solve this problem. Modem reset does not solve this problem either. I decided that perhaps ethernet controller is faulty, or perhaps the ethernet port in itself- so I bought a 'usb to ethernet' adaptor and surprisingly the internet connection problem persisted (during the instances when my laptop ethernet port had problems connecting to DNS, the adaptor was also unable to connect to internet).
What does solve this problem is this: I have another notebook - I plug the ethernet cable into that computer. Obviously, internet works without any problems with my second notebook. After that, I plug the ethernet cable back into the laptop which is now unable to connect to DNS. Quite often the Not being able to connect to DNS issue still remains the first time I do this, so I have to connect ethernet cable back into my second notebook and then plug it back into the notebook with a connectivity problem. After I do this 2 or 3 times, my windows 7 laptop is finally able to connect to internet.
I have the Mts Mbrowse ZTE AC 8720 data card. it has problem in installing in windows 8 but it works properly in window 7. It has an error fail to install access serial port 0. i didn't understand the error.
I have a TP link TL-WN722N wireless adapter and it refuses to work on my win7 machine. I've tried installying the cd driver, all the relevant drivers on the TP link website, and the generic atheros driver. I've also tried manually installing all those drivers using device manager to no avail, and it says "a device attached to your system is not functioning"
But I know the physical adaptor is working because I was able to successfully install it onto another computer (it was a windows 8 preview version).
A few weeks ago, i noticed that my desktop was unable to access the internet, even though it shows that it is connected. i eventually decided taht it must have been a hardware issue, so i bought a new motherboard. after installing the motherboard, an a fresh installation on Windows, i saw after the drivers were installed that the same thing was happening. I pinged sites, and i got no losses on data. i also did a tracer, and it showed me that it is in fact connecting.
I noticed that when I connect the pc to the network(it is always via cable) it recognizes the network as "network", whereas if i use the same connection for my laptop, it brings up the network as "NETGEAR", which is, in fact, my network's name.
My acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter.
I am trying to connect CAT5e riser cable to a GE #76536 network and phone wall plate.The problem I am having is the CAT5e cable has 4 twisted pairs of wires as follows: blue/white, green/white, orange/white and brown/white. The wall plate connection has 8 distinct colors; blue, white, green, orange, yellow, black, red and brown. (or at least that's what they look like to me)None of the white wires from the CAT5e cable have any striping. They are all solid white. I've found color charts for matching striped wires, but I am at a loss to figure out how to connect these white wires to the proper terminals
