TP-Link ADSL2+ Wireless :: TD-W8961ND Doesn't Assign IP To PCs Through Another AP
Apr 1, 2013
Region : Spain
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120524 Rel.05221
ISP :
linksys1.jpg
I have wifi at home this link installed.
192.168.1.1 is a TD-W8961ND
192.168.1.4 is a linksys wrtt54gl
And I have two problems.
1) I can not see any desktops in my local net, and with old router I could see all, for example (diskstation, dm800, etc...) In my macbook air I can not see my NAS Synology and with old router I do.
2) All PCs that are conected to 192.168.1.4 have not IP. and DHCP in TD-W8961ND is activated.
Region : Argentina Model : TD-W8968 Hardware Version : V1 Region : UnitedKingdom Firmware Version : 101029 ISP : TalkTalk
I have version 1.1 and d/l'd firmware 111125. The upgrade ran successfully to 100% and then I got the login screen again. However after checking, then restarting to factory default the version displayed was still the old one
Region : Others Model : TD-W8961ND Hardware Version : V2 Firmware Version : 2.0.0 Build 120427 Rel.09135 ISP : True
I just bought the wireless router as stated in the subject and I cant get 2 of our PC�s to connect wirelessly for some reason. 4 other PC's are fineAll machines running windows 7, but when the authentication type on WPA2-PSK the 2 computers ask for a password which we put in but keeps saying its wrong, but infact its right.I can connect them on WPA-PSK, but then all the computers drop out after 30 seconds.
Region : Canada Model : TD-W8961ND Hardware Version : V2 Firmware Version : 2.0.0 Build 120608 Rel.34612 ISP : TekSavvy NAT is enabled (under PVC2), as is UpNP
Whenever I enter all the info for a port forward under NAT in the virtual server tab, I click 'save' and nothing happens; chrome and firefox both give the same result.If I go to a different screen after pressing save and then come back to NAT settings, there's no entry updates and no port forwards.Should I install a different firmware (I can't find a newer version to install) or is NAT not supposed to work under PVC2? If I don't enter proper info (like leave the ports blank) I get an error if I press 'save', asking me to finish entering all the required info.
Model : TD-W8961ND Hardware Version : V1 Firmware Version : 100722 ISP : Talk Talk
I've downloaded the firmware update 111125 and followed the instructions. The progress bar reaches 100% but the router doesn't seem to restart (judging by the status lights on the front). It does ask me to log back in but when I check the firmware version, it still reads 100722. I also tried factory default settings after the update. Still it reads 100722. I've tried the update 3 times now.
Region : Germany Model : TD-W8961ND Hardware Version : V2 Firmware Version : ISP :
I need to set up an Internal and Guest WLAN. Out of security reason I'd like to separate both networks with VLAN's. Therefore I bought this Router TD-W8961ND and this Access Point TL-WA901ND.
SSID1 = AP1 -> VID 1 (Internal network) SSID2 = AP2 -> VID 2 (Guest network)
How do i need to set up the router that both networks can use the Internet, but only AP1 can see the other internal computers?
Region : UnitedKingdom Model : TD-W8961ND Hardware Version : Not Clear Firmware Version : ISP : Solwise (Plusnet really though)
We need to replace the old modem for a small hotel, at the same time we are trying to expand the open (and free) public wifi that we currently offer in the bar area. Before our current modem/router went *PFFFT*, we had managed to get quite decent coverage using the 5 TP repeaters (TL-WA830RE) - but it was ALOT of work. Now we're hoping to replace with a TP modem to make the wifi setup easier.We also have 3 pc's, two wired and one wireless, that are for hotel use. We would like to keep these as separate and as safe as possible from the guest wireless, and i have been told VLAN is the best way to go.So, from what i have read on its spec's, the TD-W8961ND has both VLAN and QoS (which we would also like). It is also well within our price range.Given the setup we wish to implement, is the W8961ND the right idea? What considerations do i need to be bearing in mind for setup?
Region : Greece Model : TD-W8961ND Hardware Version : V1
I have a TD-W8961ND that I got for my Dads internet connection to replace the awful Zyxel Modem/router. Problem is that the TD-W8961ND is Annex A (euroDOCSIS)We actually needed a TD-W8961NB - Annex B (DOCSIS)I already know that it is possible to convert other routers from A to B and vice versa...Just wondering if there is any way of either cross flashing or if there is a conversion firmware for this router.
Region : Argentina Model : TD-W8968 Hardware Version : V1
how to configure QOS on the TD-W8961ND so that the sip packets from a Linksys SPA2102 VOIP ATA which gets its IP address from the DHCP server in the TD-W8961ND is given priority over all other traffic regardless of whether such traffic comes from devices connected via ethernet or wireless to the TD-W8961ND. In my setup I cannot assign a static IP address to the VOIP ATA.
Region : UnitedArabEmirates Model : TD-W8961ND Hardware Version : V1 Firmware Version : ISP :
I have two W8961ND, one for may office and the another one for use at my home, I tried to upgrade my device but during the upgrading the power supply plugged out and after that my device didn't boot up any more, so how can I repair my device, Is there any uploader for it's hardware chip because it doesn't work with it's LAN port or WIFI at this moment
Region : UnitedStates Model : TD-W8961ND Hardware Version : V2 Firmware Version : ISP : ATT
I want to add more users to my home network and I couldn't, at this moment I only can connect 8 devices (12 devices at least) when I try to connect the next one its impossible, but if I take off one of the connected devices then the router allows to connect the new one.How can I connect more than 8 devices to my router ? (wireless)Also, is there any limits with Wireless MAC Address Filter ? because I can't add more than 8 MAC addresses in my old router I could do that.
Model : TD-W8961ND Hardware Version : V2 Firmware Version : 120703 ISP : [/COLOR]
Region : United Kingdom Model : TD-W8961ND Hardware Version : V2 Firmware Version : 120703 ISP : Plusnet
I bought this recently on EBay and it works fine. I have just checked the firmware version and it displays as 120703 rel 29722. This version doesn't appear amongst the downloads - the most recent is 120427. Has somebody upgraded to the wrong software? Should I upgrade to 120427?
Region : Italy Model : TD-W8961ND Hardware Version : V3 Firmware Version : 3.0.0 Build 120720 Rel.09287 ISP : alice
A couple of weeks ago I have bought a TD-W8961ND in replacement of my old modem/router (of another brand, to upgrade from Wireless G to N). I tried to replicate in the new router something similar to my old setup, so I programmed Virtual Servers (under the NAT menu) with the following rules: NATRules.jpg in an attempt to:
- grant access from "outside" Internet to my web server
- have a Wakeup-On-LAN from "outside" Internet ..etc.. without success. Please note that:
- I have successfully setup a DDNS server to reach my modem router from outside
- as for WOL, I defined my subnet mask as 255.255.255.128
- I have not set any other rule, nor in NAT, nor in routing or other
- I tried also with firewall disabled
- I do my testing by means of a smartphone with wireless disabled and Internet connection via mobile service provider
- Both the above mentioned functions were working with my old modem/router (and still work on LAN), and I have not changed other things (PC setup etc)
Region : UnitedStates Model : TD-W8961ND Hardware Version : V2 Firmware Version : ISP : at&t
Having trouble setting up router for remote viewing my Swann DVR. I've gone to Advanced Set Up( NAT)to Vertual Server and added two rules for DVR one for port 85 and one for port 9000 both with the DVR's IP Add. of 192.168.1.165 Is there something else I should do?
Region : UnitedKingdom Model : TD-W8961ND Hardware Version : Not Clear Firmware Version : 3.0.0 ISP :
I was using dsl connected to pc with ethernet cable, on line streaming movies were fine, now with TP LINK ADSL2+MODEM ROUTER streaming has become very very slow using wireless, signal is excellent, web surfing is fine, do I need to change setting to improve streaming?
Region : Others Model : TD-W8961ND Hardware Version : V3 Firmware Version : 3.0.0 ISP :
My router is TDW8961ND The firmware version is 3.0.0 The hardware version is 3.0
I am trying to have a virtual http server at port 80 but when I do this and save, I get this message: "Notice: The WAN HTTP port of CPE will be chaged to 8080 if submit successfully."Then after that I cannot access the server at port 80.
Region : UnitedKingdom Model : TD-W8961ND Hardware Version : Not Clear Firmware Version : V.3 ISP : ADSL24
Using windows 7 and 8 on different machines I am unable access my routers web based set up.
I enter the usual "admin" and password in the login box. 3 goes and then get error message. or hangs on waiting.(connected to the router with Ethernet Cable). Could this be a windows based problem. I think it was ok on XP but that is gone now. Router is working fine but I just cant access it to alter any settings.
My 2 other spare routers which are not TP-link also have the same problem.
Region : UnitedKingdom Model : TD-W8961ND Hardware Version : V3 Firmware Version : 3.0.0 Build 120524 Rel.05221
I have just bought this ADSL router. Of course, the first thing I did was upgrade the firmware, or so I thought.It seems that the firmware on the TP website is older than the one which was pre-installed onto the router.Website Firmware: 3.0.0 Build 120524 Rel.05221 ------------- i.e. 24.May.2012 Release 05221.Pre-loaded Firmware on router: 3.0.0 Build 120808 Rel.28888 -------------- i.e. 8.August.2012 Release 28888.I have foolishly uploaded the older firmware to the router from the website. I wanted to see what version number showed in the Router's Firmware page so I did a ROM backup, thinking I could always reload the "current" firmware. As it turns out, the ROM file is just the user settings backup.
It is sad that TP-Link doesn't provide change logs. Where to find later firmwares, or even what the change to the firmware was?And when we can expect a new firmware to be uploaded to the website?
Region : India Model : TD-W8961ND Hardware Version : V3 Firmware Version : S/N: 12B79605315 ISP : BSNL Data One
I had Purchased a brand new TP-Link WifI Modem Router TD-W8961ND with S/N : 12CB5200872 from [URL] and it got delivered few days back. When I am trying to connect it to the internet the modem is not getting connected nor configured. The Power button light, ADSL Light and internet light are continuously blinking and nothing is getting steady. The modem is appearing to be a damaged piece of modem and it is very unfortunate that we have got a modem from flipkart in an unserviceable condition. It came with a warranty of 03 years and I wanted a replacement so that I can use the modem for connecting internet.
Region : UnitedKingdom Model : TD-W8970 Hardware Version : V1 Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n ISP :
However, when I initially connect to the router, either on the LAN or remotely via the internet, the router takes a long time to display the initial page (up to 1 minute) and then usually displays the page without any variable data included. Frequently it also fails to show the menu on the left either. By hitting Refresh several times, eventually it will load the page fully.
We have cisco ap 500 series, it was lightweight, but we migrate it to standalone, now, the scheme is simple.We have a router 2811 and dhcp created on it, also we have f0/0.30 virtual interface with ip of 10.10.30.1.On switch one interface (trunk) goes to router f0/0 interface, and one interface (access) goes to ap.On AP we have BVI interface with 10.10.30.10, and default route to 10.10.30.1.So when we connecting to our SSID, it connect but doestn receive DHCP, and takes APIPA address, why ap doesnt assign ip to clients.
Recently 3g was made available, and I just manage to get and hold a reasonable connection (3-5mb/s) by putting the 3g dongle on my roof and running a long usb lead down to my pc.Running virtual router manager on my pc I can connect my iphone/ipad/other laptop and apple tv to the internet, however the wireless from the laptop is weak and when trying to use Apple's TV mirroring, the signal is too weak.I have an old ADSL router (TP-Link TL-W8961ND), using the Wifi network from this I am able to produce a smooth picture on the Apple TV, but connecting to this network, I lose my internet connection.Is there anyway I can bridge the 3g connection from my laptop to the router - either wireless or via ethernet cable to share the internet connection, and create a more stable wireless connection at the same time?
Region : Spain Model : TL-WR1043ND Hardware Version : V1 ISP : Telefonica
I have a shop and retail TP products.I have had in the past 2 days three TD-W8961ND's returned due to internet issues.upon investigation the problem is the same in that DHCP is not enabled on each of the 4x ports.It is the same across 3 customers and occurred last week end.
My ISP recently started offering dual stack IPv6. After changing IPv6 from manual tunnel to automatic, none of my devices get an IPv6 address from the ISP. In the troubleshooting page, IPv6 address is also empty. I tried resetting the router but had no difference. We have another router (ASUS RT-53N) and it works fine.The ISP is using PPPoE for IPv4. In RT-53N I choose "IPv6 with DHCP-PD" and Interface "PPP". There're no such options in EA2700 though.
I tried restarting the router and the computer, but to no avail. I've also tried with another ethernet cable and tried several ports, but that did not work, either. What is interesting is that other computers in the household connect to the router via wire without problems. I suppose that means something's wrong with my computer, however, I do not know what. I have a netgear router which says "N300 Wireless ADSL2+ Modem Router DGN2200v3" on the back. My computer has Windows 7 Home Premium installed. I'm using a DSL connection, and Avast! antivirus.
Buying a TP-Link W8961ND modem/router. Didn't work at all, except for a vague sense I got that the internet wasn't spending as long 'down' as previously when it did drop.And now today my housemate and I are both connected and suffering these intermittent drops, which become more and more frequent, until finally the internet cuts out and won't return. Now I cannot get the TP-Link router to connect to the internet at all. However, switching back over to the original D-Link router now the internet DOES work, but still only intermittently. As I've been writing this it's dropped out for a couple of moments twice!
I had an old belkin router and the net worked fine well the router would need to be restarted every week or so. But i got an upgrade and i now have a TP link TD-W8961ND The net is terrible its either there or not. have to keep refreshing pages ect .Could a setting possibly be wrong?
Region : Portugal Model : TD-W8970 Hardware Version : V1 Firmware Version : ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
