TP-Link ADSL2+ Wireless :: TD-W8970 Freezes Randomly

Mar 24, 2013

Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Infostrada

My TD-W8970 freezes randomly, sometimes several times a day, sometimes less, but now the problem it's more frequent and I suppose it could be generated by some internal component that could have a abnormal behavior.Anyway, this happens in different situations, either using all the functionalist, or being only on and in idle state. Last time was few minutes ago, when all the system were shuttled down and only router was on.

View 1 Replies


ADVERTISEMENT

TP-Link ADSL2+ Wireless :: Using A TD-W8970 With A NAS?

Feb 28, 2013

Region : Australia
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :

Im having issues setting up port forwarding with my Synology NAS.

My house is all connected via network cable, going to a main 24-port switch, which is connected to a Modem/Router (TP-LINK in this case). I can access the NAS from anywhere on my home network, send and receive is fine. I previously used a Billion modem/router in the same config and it all worked fine.

The problem is that when going through the Synology setup, it fails to see the tp-link. So therefore I cannot run its port forwarding program to setup all my ports. Which in turn the NAS can't access the internet. I have started going through the port-forward setting on the router interface, and manually entered the ports - i realized that I'm limited to the number of ports i'm allowed to open! I have also run a port testing program, some are successfully opened the others are not.

Is there some button i need to check or switch on the modem?

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: Can't Connect With TD-W8970

Feb 25, 2013

Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : TD-W8970_V1_130201

I just bought online a brand new TD-W8970 modem/router but I'm in trouble with getting ADSL working.I set up a PPPoE connection with the settings from my ISP but the ADSL Led on the device is solid OFF and in the Admin section it says DSL Status: Not Connected.

[code]...

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 - NAS Not Being Seen On Network

Apr 16, 2013

Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP : Virgin

I've just replaced my aging ZyXel Wireless Router with a TD-W8970 which connects to the internet with no problems whatsoever. However, I have an ethernet connected Western Digital MyBookLive NAS which is happily allocated an IP addess but does not show up on my network on my PC (Windows Vista - fully patched). A usb connected pen drive and exactly the same. Am I missing something blindingly obvious? On the ZyXel the NAS worked with no problems whatsoever.

The problem with the NAS was my internet security Bitdefender. For some reason, on installing the TP-W8970, it switched my firewall status to public from home/office. Corrected that and the NAS can now be seen over the network. This does not fix the USB attached pen drive not being seen problem though.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: Ddns Used Behind TD-W8970 Is Not Working

May 4, 2013

Region : Others
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :

I just set up DDNS for my home, and also set forwarding port 5000 for my NAS with an specific IP address 192.168.1.xx. Then, I use my office Internet to call DDNS xxx.dyndns.org:5000 to connect the NAS in my home, It is working OK (from outside to home) However, if I call xxx.dyndns.org:5000 by my home Internet, it is not working (from inside home to home). But if I directly call NAS' IP address 192.168.1.xx:5000, it is OK to reach it. So I think, DDNS used behind TD-8970 (inside home) is not working. TD-9870 is not forwarding port.

I don't know what do I miss in setup this WD-8970.

My previous Zyxel wireless router modem can allow me to us DDNS behind it with out any extra setting. Is it possible that there is still some bug in Firmware of this TD-8970?

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 - TP-LINK USB Printer Controller Is Causing BSOD?

Apr 12, 2013

Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :

Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.

However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.

I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).

To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.

The router print server is a nice functionality and I really want to use it.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Can't See Synology Nas Using VPN Tunnel Between TD-W8960N And TD-W8970

May 3, 2013

Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 2.1 v000c.0 Build 130415 Rel.34164n
ISP : plusnet

I have setup 2 vpn tunnels from my TD-W8970 to places that use TD-8960N (Firmware Version: 1.4.0 Build 110921 Rel.17774n Hardware Version: TD-W8960N v3 0x00000002 )and I can ping and connect to any ip used at their end but they can only ping 192.168.1.1 which is my router and not 192.168.1.104 which is my Synology DS212J that they need to access.

Both tunnels are similarly configured:

Tunnel 1 on my TD-W8970
IPSec Connection Name: Tony1
Remote IPSec Gateway Address(URL): 89.240.xx.xx
Tunnel access from local IP addresses: Subnet
IP Address for VPN: 192.168.1.0
IP Subnetmask:255.255.255.0

[URL]

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 - VPN Disconnection But Tunnel Still Shows As Up

Apr 15, 2013

Region : United Kingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : O2

I have sent the following trouble ticket to TP Link Support hoping they can shine some light/fix a VPN issue I am experiencing with the TD-W8970 router.

Please see the text below.........

I have 2 tunnels set up on my TP Link TD-W8970 and although both of these work for a a while, they both drop out after 24-36 hours for no apparent reason. The tunnels still show as "up" in the router, but I lose PING and connectivity to my remote systems. The only thing that seems to fix this is to reboot the router.

I have tried the tunnels with and without "DPD" (Dead Peer Detection) enabled and the results are the same.

I have 2 other friends who have the exact router with the same firmware (latest version), and they too have the same issue.

There is nothing in the logs showing any disconnection of the VPN, and as I have mentioned, the tunnel still shows as "up" on both ends. Its almost as if the service has stopped running, but I cannot check this.

View 6 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 - Optimise Driver Adsl?

Mar 4, 2013

Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Telecom

Below you point out my attenuation values ​​detected on the modem in question:
Line Status:Connected
DSL Modulation Type:ADSL_2plus
Annex Type:Annex A
UpstreamDownstream
Current Rate (Kbps)4768124
Max Rate (Kbps)104811512
SNR Margin (dB)28.412.2
Line Attenuation (dB)17.233.4
Errors (Pkts) 0 0

The part adsl should be revised as the highlighted value and too discordant from the value taken on the same line as route draytek 2800 with attenuation of 24.5 db snr to 16dB, I'd like to find a job in the next firmware dedicated all'ottimizzare driver adsl modem so is worse than 6 years old

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: W8970 Dropouts Connected To DirecTV DVR

Mar 3, 2013

Region : UnitedStates
Model : TD-W8970
Hardware Version : V1
ISP : CenturyLink

Just installed new W-8970 via centuryLink ADSL, connected two computers (hard wire) which work fine. I also have it connected by hard wire to my Direct T.V DVR Model HR 24 to run T.V app's such as Pandora music etc. It will only stay connected for 5-10 minutes then drops out, any suggestions other then buying a different brand modem/router.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 Web Interface Doesn't Always Display Fully

Mar 13, 2013

Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP :

However, when I initially connect to the router, either on the LAN or remotely via the internet, the router takes a long time to display the initial page (up to 1 minute) and then usually displays the page without any variable data included. Frequently it also fails to show the menu on the left either. By hitting Refresh several times, eventually it will load the page fully.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: W8970 Print Server - Can't Add Printer In Control Panel

May 7, 2013

Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :

I am struggling to get a printer added through the print server. The printer is set up in the TP-Link USB Printer Controller and selected as the auto-connect printer. I can scan through the server, but can't add the printer in control panel or see it as a option when printing. The printer is a Samsung SCX-340F.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 Wireless Connection And DHCP Server

Feb 27, 2013

Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : wind infostrada
TD-W8970 Wireless connection problems|

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Wind Infostrada

That's a wonderful router on the paper! Really it has some problems with the wireless connection and the dhcp server. After 2 days of i must forced to reset the router because it refuse any wireless connection while the internet browsing on the other pc connected via ethernet ARJ45 is very slow.To complete the scenario the router doesn't allow any acces to his console page ..so what's the problem?

I try to change any channel for the wireless without no positive result.I bought it on amazon but if this situation will continue without any solution from tp-link i will forced to send it back with a totally negative feedback on the product.

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8960N Disconnect Randomly

Feb 14, 2013

Region : UnitedStates
Model : TD-W8968
Hardware Version : V4
Firmware Version : 1.1.1 Build 120912 Rel.67406
ISP : centurylink
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 1.1.1 Build 120912 Rel.67406
ISP : centurylink

First a bit of background. At the end of December, my centurylink modem finally had enough problems with disconnects(was 6 or 7 years old), and Centurylink sent out a new router/modem. The new modem/router, a Zyxel, worked great, and all was good in my house hold. Then I got the bill and found out that unlike the previous modem they had sent me, this one I was paying a lease payment for. At which point I returned the Zyxel which gave us the best service we'd ever had, and bought this TD-W8960N. The reviews were glowing, setup was easy, but we started rather quickly to have disconnects. A call was made to Centurylink and they confirmed service was working, and since the modem/router was not theirs, referred us back to you. I called and after considerable time on the phone, all I was basically told to do was a hard reset to the modem. When the unit finished booting back up, internet was restored. Of course it was restored everytime we reset it for a while. At that point I was told that since the unit was working, that there was nothing left to be done. Since that time, it has disconnected us from time to time, and then in the last 2 days, sometimes it won't stay connected for more than a couple of minutes. My wife is very unhappy-she is a gamer, and a disconnecting internet is very very bad for an online gamer.

It seems that the further it gets away from a hard reset,the more it disconnects. After 6 soft resets (unplugging) today, I had to do another hard reset to get back on to register here and post this message. Is this a known problem for this unit? Is there a fix for this unit? Or, do I just need to return it to Newegg and try another manufacturer?

Again, the "leased" Zyxel gave us no problems for the month or so that we used it.

View 5 Replies View Related

Internet Randomly Freezes For A Couple Of Seconds Sometimes

May 1, 2011

I am connected directly to my modem. My isp is Verizon fios. my internet randomly freezes for a couple of seconds sometimes. mostly when im in game and on ventrilo i notice it. any idea why its really frustrating when im in game cuz i freeze and come back dead.

View 19 Replies View Related

Wifi Network Adapter Randomly Gets Limited Connectivity And Freezes?

Apr 25, 2013

I'm having a really annoying problem which is making my laptop almost unusable and a hassle to use. After a while of my laptop being on, my wireless network adapter will suddenly get "limited connectivity", and won't connect to the internet.Disabling and enabling the adapter will cause my computer to freeze, requiring a restart. The same with troubleshooting. The only thing which fixes this is a fresh reboot, however it always occurs again within the hour.Sometimes the entire adapter will randomly just disable itself, and the computer will completely freeze, meaning I have to press the power on/off. Sometimes the adapter will just disappear from Device Manager. Searching for "plug and play" devices will cause it to freeze.

Apart from having to reboot, what also seems to work is disabling the wifi from PC Settings, putting the computer to sleep, then awaking it and turning wifi back on. I've had to do that 6 times whilst typing this post.I've tried flushing my dns, registering it, renewing and releasing. Assigning a static DNS address. All those things. Though I may have done them wrong.Operating system: Originally came with Windows 7 64bit installed, issue began on this.I installed Windows 8 64bit Pro a month ago, did not reset settings. Problem persists[CODE]

View 1 Replies View Related

Wifi Network Adapter Randomly Gets Limited Connectivity And Freezes

Apr 25, 2013

I'm having a really annoying problem which is making my laptop almost unusable and a hassle to use. After a while of my laptop being on, my wireless network adapter will suddenly get "limited connectivity", and won't connect to the internet.

Disabling and enabling the adapter will cause my computer to freeze, requiring a restart. The same with troubleshooting. The only thing which fixes this is a fresh reboot, however it always occurs again within the hour.

Sometimes the entire adapter will randomly just disable itself, and the computer will completely freeze, meaning I have to press the power on/off. Sometimes the adapter will just disappear from Device Manager. Searching for "plug and play" devices will cause it to freeze.

Apart from having to reboot, what also seems to work is disabling the wifi from PC Settings, putting the computer to sleep, then awaking it and turning wifi back on. I've had to do that 6 times whilst typing this post. I've tried flushing my dns, registering it, renewing and releasing. Assigning a static DNS address. All those things. Though I may have done them wrong.

[B]Specs:[/B]
[B]Laptop model: [/B]Samsung RV511 (i5) notebook from around 2010
4GB RAM, Intel(R)Core(TM) i5 CPU M 480@ 2.67GHz

[Code]....

It's the latest driver according to Windows. I keep uninstalling the driver and installing random ones from 2006, 2011 etc however the same problem persists. I've tried uninstalling the driver and just rebooting, but problem still comes back after a while.

View 2 Replies View Related

Broadcom 802.11n Wifi Network Adapter Randomly Gets Limited Connectivity And Freezes?

Apr 25, 2013

making my laptop almost unusable and a hassle to use. After a while of my laptop being on, my wireless network adapter will suddenly get "limited connectivity", won't connect to the internet but will still get the router.Every single Xirrus test fails.Disabling and enabling it will cause my computer to freeze, requiring a restart. The same with troubleshooting. The only thing which fixes this is a fresh reboot, however it then occurs again within the hour.Sometimes the entire adapter will randomly just disable itself, and the computer will completely freeze, meaning I have to press the power on/off.Apart from having to reboot, what also seems to work is disabling the wifi from PC Settings, putting the computer to sleep, then awaking it and turning wifi back on.

Specs:

Samsung RV511 (i5) notebook from around 2010
4GB RAM, Intel(R)Core(TM) i5 CPU M 480@ 2.67GHz

Came with Windows 7 64bit installed, issue began on this.I installed Windows 8 64bit Pro a month ago, did not reset settings.

Broadcom 802.11n wireless network adapter
Device ID 4727
Driver date: 13/03/2012
Driver: 5.100.245.20

It's the latest driver. I keep uninstalling the driver and installing random ones from 2006, 2011 etc however the same problem persists.I've tried uninstalling and just rebooting, but problem comes back after a while.This is my IP config when the adapter can't find a connection:

Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:UsersStefan>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Zangara-RV511
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No

[code]....

And this event/error seems to be appearing in my Events log."Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001BB1A80E96. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." DHCP-Client Massive guess, something wrong with my DHCP or DNS? I've tried assigning fixed DNS addresses, this didn't work.And I always get this one constantly:"Failed to schedule Software Protection service for re-start at 2113-02-08T21:58:11Z. Error Code: 0x80041316" Security-SPP

View 4 Replies View Related

TP-Link 300Mbps Wireless :: VPN Connection From Win 7 Client To TD-W8970?

Mar 7, 2013

Region : Australia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

I am trying to get a windows 7 laptop to connect to a TD-W8970.

View 1 Replies View Related

Protocols / Routing :: Port Forwarding TP-Link TD-W8970?

Jan 19, 2013

Router Model: TP-Link TD-W8970 port forwarding my modem/router. I previously was able to successfully port forward a Valve Source Server and had other people join on the internet so...(It worked) I recently reformatted and since have had issues.

I'm currently setup with PPPOA and I've added various ports for different programs (a Teamspeak 3 Server[9987] and Minecraft[25565]) either dont work. I used a port checker program and they either say the port is closed or the connection is refused...I've tried using a static IP but I think i configured it wrong becuase i was barely able to get the internet while using it, either way..the ports didn't open.

DCHP is disabled (Tried enabling, didn't work) The above ports are enabled with Windows firewall (inbound+outbound) and Im not using any Anti-virus software to block the ports. Windows 7 64bit, fresh format and ports that wont go through.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - LAN Freezes With High Bandwidth Usage

Jan 13, 2013

Region : Romania
Model : TL-WR841ND
Hardware Version :
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : cosmote

hardware version is WR841N v8.wireless works just fine. i use it for my smartphone and an old laptop. i use ethernet cable to connect to main computer where all is ok until i start using my bit torrent client. as soon as i build up traffic above 1MB the ethernet portion of the router freezes and needs a reboot. when frozen, wireless is still working and i still have access on the lan to the router via my browser. i got this router so i could have wifi for my phone. my old router (asus rx3041) worked just fine and i accessed my isp at the maximum speeds it would allow on a 60 gigabit connection.

View 9 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Virtual Server Link Missing Under Nat Menu

Mar 3, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange

I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.

View 1 Replies View Related

D-Link DIR-600 :: SSDP Traffic Freezes The Router?

Nov 2, 2011

I have a DIR-600 (firmware 2.05) connected to internet and my computer. For a week or so, for some reason, there is a high number of SSDP messages on my internet cable (about 100/second). Probably a faulty equipment from the internet provider.

The problem is that this high traffic of SSDP messages cause the router to freeze, the instant I plug in the internet cable.

I have tried to block in the router firewall the address 239.255.255.250 on port 1900, but it get the error "invalid address". I have also disabled the Upnp function on the router, but without result.

How can I block these messages, so I can use my router again.

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: Why TD-W8968 Use Two Channels

Apr 17, 2013

Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :

According to inSSIDer the router seems to be using two wifi channels (10+6) and inSSIDer is recommending to move to a standard channel (1,6,11).

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: W8960N Need To Add A USB HDD Server

Nov 8, 2012

Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : BT Broadband

Just got myself a new Modem/Router (TD-W8960N), and it wasn't until I had it all up and running that I realised it didn't have USB port on the back.Anyways, I was wondering how I could go about fixing this? I stumbled upon this (TP-Link TD-8817) on Amazon and wasn't sure if I could attach this to it in bridged mode or something. This has the USB socket I need. If this was all I needed, how do they connect together? I have a BT connection btw.Also, I have a Justop Android 4.0 TV Box (media player). Would this be able to see the HDD for streaming movies.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8901G - Cannot Access Some Url

Jan 12, 2013

Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version :
ISP :

problem with filtering

Region : Syria
Model : TD-W8901G
ver 6.0
54Mbps wireless G ADSL2+:

I used the url filter utility inside the router program. I put some url for example www.google.com, I wanted to try the filtering cababilty, Later I deleted all these adresses , but unfortunatley it keeps telling me the following message: "The system returned: (110) Connection timed out The remote host or network may be down. Your cache administrator is webmaster@proxy1."

View 1 Replies View Related

D-Link DIR-615 :: It Freezes Every Night And Reverts To Factory Settings When Power-cycled

Dec 4, 2011

Our DIR-615 has started freezing and when reset (power cycled), it reverts to factory settings.This has been running 24/7 for several months with no problem. Three days in a row now I've woken up to find our home network is down and the DIR-615 status lights are "yellow". Power cycling the DIR615 resolves the problem however the DIR-615 looses its settings, reverting to factory defaults (looses the admin password, wireless settings, etc). I can reload the settings from a file saved on my computer but needless to say, this is a bit annoying. I don't believe there are any wireless clients connected at the time as most of the wireless is served by an airport two floors up. There are several wired devices always connected:

a Zoom ATA carrying our "land line"
a tivo (doing whatever tivo boxes do)
a SSL based Voip phone (different than the zoom ata)
an AirPort Express 802.11n (bridge mode) which may have a couple of wireless clients
a laptop which may or may not be sleeping at the time

There are a couple of ethernet switches in the network.Some of the devices acquire addresses via DHCP, others are assigned fixed addresses outside the range of the DHCP addresses served by the DIR-615.Nothing has changed on the network in months.

The only settings I've messed with on the DIR-615 are:

   a) set the admin/user passwords

   b) Set the wireless network name, enable WPA, set the WPA Key

   c) enabled ntp (this is now disabled and I've set the time manually)

   d) Change the network base from 192.168.0. to 192.168.4.

The DIR-615 is hardware rev E3, Firmware 5.10 The cable modem (from RCN) is a Scientific American model DPC2100R2

View 12 Replies View Related

Using TP-LINK Wireless ADSL2+ Router As Relay Unit?

Jan 10, 2012

I use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost). I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company. Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND Doesn't Assign IP To PCs Through Another AP

Apr 1, 2013

Region : Spain
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120524 Rel.05221
ISP :
linksys1.jpg
I have wifi at home this link installed.
192.168.1.1 is a TD-W8961ND
192.168.1.4 is a linksys wrtt54gl

And I have two problems.

1) I can not see any desktops in my local net, and with old router I could see all, for example (diskstation, dm800, etc...) In my macbook air I can not see my NAS Synology and with old router I do.

2) All PCs that are conected to 192.168.1.4 have not IP. and DHCP in TD-W8961ND is activated.

View 5 Replies View Related

Tp-link Adsl2 Wireless :: Td-w8151n Can't Connect To Net From Wifi

May 7, 2013

Region : India
Model : TD-W8151N
Hardware Version : V3
Firmware Version : 120530
ISP : BSNL

Net is working smoothly from LAN, but no success on wifi. Over wi-fi, I can connect to router but cannot access net.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: W8961ND Firmware Will Not Update?

Mar 15, 2013

Region : Argentina
Model : TD-W8968
Hardware Version : V1
Region : UnitedKingdom
Firmware Version : 101029
ISP : TalkTalk

I have version 1.1 and d/l'd firmware 111125. The upgrade ran successfully to 100% and then I got the login screen again. However after checking, then restarting to factory default the version displayed was still the old one

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8960N / URL Filter Is Not Working?

Feb 7, 2013

Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG
URL Filter not working
Region : Australia
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG

Cannot get the URL filter to work Just upgraded to latest Firmware but that didn't work?

URL List Type: Deny Allow Disable
Address Port Remove

[URL]

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: 42LM640S / LG Smart TV Cannot Connect

Mar 12, 2013

Model : TD-W8951ND
Hardware Version : Not Clear
Firmware Version :
ISP : Metronet BPL

I connect to the internet by BPL modem on electricity , for using my modem's wireless feature ı have to close DHCP and use modem in bridge mode, otherwise I can't use wireless, And my problem is connecting to the internet with my LG 42LM640S smart tv using wireless, When I talk with LG techinal service they came and try to connect tv to the internet with using their android phone's hotspot feature, my tv connect with phone's hotspot feature to the internet,So they said that "you have to change tp link modem's encoding system?Now it's encoding mode in WPA enconding system :S But whwen ı shut down encoding wireless tv didn't connect again?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved