I have an HP LJ4050 plugged right into one of the open LAN ports on my E4200 with a CAT6 cable. Can this router work as a LAN print server? I can't pull up the IP on a browser window or ping it successfully.The 4050 doesn't have USB capability and I don't want to use the parallel port on my PC unless I have to.If possible, I'd like to have wireless computers on the network be able to print to it as well.
View 5 Replies
I have a simple question; Does the E4200 have a print server built into it? I have a usb printer that I want to attach to the router so multiple computers can print to it. The printer does not have ethernet or wireless. I will be upgrading the printer later but would like for it to work with all my computers at the moment.
View 9 Replies View RelatedOn my new E4200v2, after I tried to move beyond the disappointment of Cisco removing Internet Access Policy entirely, I decided to give the stripped down Parental Controls a try.
Sadly, I didn't have any luck doing what I needed to do... block my Tivo's from accessing Youtube.
I enabled Parental Controls, Added the Target Devices (my Tivo's did show up), and added "Youtube.com" as blocked site #1. Saved. Entered the parental password when prompted. Even rebooted the router.
But Youtube wasn't blocked. So I added to the target list a non-Tivo device (a Macbook) for a reality check, and rebooted the router again... still no luck. Youtube still not blocked.
So then I started to wonder if their Parental Control depends somehow on the local DHCP server & Client list. Because my E4200 has DHCP Server = OFF (I have always used a Windows Server for DHCP).
I tried to call Linksys support to get this working, but after 45 mins, including escalation to senior engineer, they really were pretty useless (no real familiariarity with my problem) then they disconnected my call!
Since firmware 1.0.02, E4200 supports connect printers to USB port and print to it from Windows using CiscoConnect.Is there any way to print from Linux (using CUPS, LPD, etc)?
View 3 Replies View RelatedI have an HP laser printer (network printer) plugged into one of the ethernet ports of the E4200. I am able to print and communicate with the printer (via the built-in web interface) for the first few hours after the printer is powered on. After a day or so, however, (when the printer has gone into sleep/power-save mode) I can no longer print or attach to it - it is seen as being offline. The only way around this is to power the printer off and on again.I never had this problem with the E3000 or the (non-Cisco) router before that. I do not see any settings that would cause this to happen.
View 9 Replies View RelatedFew months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer. Is it possible to do like this?
View 2 Replies View RelatedI have a new Polycom Soundpoint IP550 VOIP phone that was not connecting via my old WRT54GS router. I purchased a new router, the E4200, thinking it was just the age of my original router. It also will not allow the VOIP traffic through. I can connect the VOIP phone directly to my CenturyLink modem and it works. But when I connect it back to the router it stops.
I contacted Cisco support and they had me upgrade the firmware to 1.0.02 build 13 May 24, 2011 version. Also adjusted down the MTU to 1364. That still did not work so they told me to take the router back to the store. I have not done that yet as I want to ensure that the router is really broken and not that I am missing a setting. The tech said that I should be able to plug the VOIP phone into the router and make NO additional changes.
I just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?
View 2 Replies View RelatedI set up my new E4200 to forward port 7300 to a computer on my LAN. I had this working on my Linksys WRT160N and copied all of the settings so they are identical to those on that router but forwarding does not work. I have tried single port forwarding, multiple port forwarding and even DMZ with the same lack of results.
View 9 Replies View Relatedwhy Windows Backup in Windows 7 pro 64 would not backup over the network to a drive I have connected to the 4200s USB port? Everytime I run it I get a Access Denied error at the end, even though data has been transfered. After about 5 hours of searching both here and Microsoft's website, I just get lots of people with the same issue that hasnt been resolved anywhere consistantly.
View 1 Replies View RelatedI have the 1.0.03 firmware installed and URL blocking doesn't work. I assigned the policy to the entire address range and could still access the web site I wanted to block.
View 1 Replies View RelatedI'm looking to purchase the E4200 and use an external HDD with enclose as a NAS (probably just a backup drive), specifically this model. [code]The HDD would be a 1TB Samsung Spinpoint F3.Does this router allow for USB 3 connections or at least fallback to USB 2? The first comment on the external enclose says so otherwise.
View 3 Replies View RelatedModel name: Linksys E4200
Model number: E4200
Firmware version: 2.0.36.126507
Operating system: Windows XP SP 3
Software version: 1.4.12005.2
Connection type (WAN): DHCP
My Canon MX882 multifunction printer is connected to the router via USB cable. The printer works. The scanner does not work.
I have tried both old firmware (2.37) then the Cloud firmware and now back to 2.37 again. the parental controls seems kind of fool proof but anyhow they dont work for me.If I set the internet access as denied at certain times, if the client is already connected when that time occours, it can continue to use internet (until it disconnects and tries to reconnect). Happens almost every time. And the biggest problem is that if I try to block internet access for a device like a cell phone, even though the user can not access the internet through the web browser, apps like Facebook, games etc can still access internet. Kind of useless parental control?!But I have tried to reset, reflash etc.Also I find this router pretty unstable, the only device that works flawless is my iPad (3), the laptops and cell phones at home loses internet connection every one and then, even though it seems like they have good connection to the router. Never been a problem with my earlier routers.
View 9 Replies View RelatedI'm having a problem with Wake on Lan. (I'll bet you never guessed from the title, eh?). I have an E4200 and I can not get WoL to work over the internet.(I'm assuming it's not actually going out to the internet when I wirelessly wake it using shawn.dynamicservice.com and the subnet, but rather the DDNS name is being resolved through the ARP cache, but I don't know. I'm still learning) Consequently, if the sentence above in parenthesis is correct, I am unable to perform WoL from outside my LAN. What am I missing?
View 3 Replies View RelatedI'm trying to fix the network at a student housing building and the system is kind of a mess. We bought a new E4200 to replace our old Linksys router which no one knows the admin pw to. We have four switches for 50 connections throughout the four story house and when switching the connections over to the new E4200 all of the wired connections no longer work. Switch back to the old router and presto. How do I need to change the settings with the E4200 to get it to work?
Also, as it's a thick old house the E4200's wireless only covers maybe half of it...I purchased two wireless repeaters to put on the 3rd and 4th floors, are these simple to install with the router?
I just got the e4200 the other day and everything has been great except I can't seem to get my ABS megacam 4 ethernet camera to work.It was working fine with my old router, and if I plug directly into it it works, but I can't access it through the router at all. I can see the camera in my routers client list, the camera is set to DHCP and it is assigning it an IP address but I can't connect to it. From my desktop pc (wired) I can using the IPwizard software that came with the camera and it will see the camera on the network but it wont connect to it, my wireless clients can't even see the camera using the same software.
View 6 Replies View RelatedI recently bought myself the E4200v1 router, and have had several issues with it. One issue I cannot seem to find a workaround for is the wifi bandwidth problem.I have a 100/10 mbitl internet connection. The router claims to support 300/450 mbit speeds over wifi, so that should be plenty. in reality however, that isnt so.Even though my N-standard wifi adapter on my machine states it has a 130 mbit connection to the router, I consistently test the internet throughput when using wifi and speedtest.net to around 20-21 mbit. If I put in a cable, I instantly get full speed, 100/10 mbit.
Have to add; I am not new to the networking game, I have a CCNA and a degree in computer sciences, and work with hosting web sites using cloud tech every day. At this point, I have tried everything related to settings on the router, so I can only conclude that there's some kind of bug in the firmware. I would expect the standard firmware to work, and not having to install DDWRT or other custom firmware.
I'm just about to trade-in an E4200v2 for a E4200v1, primarily to regain the "Internet Access Policy" capability.
Just wanted to do a reality check with those of you who tried/use IAP... does it work basically as advertised?
I would be using IAP to specify MAC addr's of devices, blocking them from certain URL's and limiting their hours of Internet access.
And I plan to have Linksys's DHCP Server turned OFF, since my Windows Server handles DHCP on my network.
Should I expect all of this to work OK? No major reliability problems with IAP?
I have a E4200 v1, connected with a few PCs by ethernet ports and various devices by wifi. Now the wireless devices work perfectly but sometimes the PC via ethernet ports cannot connect to LAN and internet.
View 2 Replies View RelatedI have Linksys configured with IP 192.168.0.x and my local network ip 192.168.1.x have firewall connected to Adtrans box that gives us internet access via T1 line and other port is connected to the switch. Wireless router is connected to the switch using internet port.I can connect to wireless using iphone but emails don't work when connected to wireless. I tried to connect laptop to wireless is does not connect.
View 9 Replies View RelatedWe have three brand new E4200 routers, all using the most current firmware (1.0.02). They are all in bridged mode, however when I attempt to enable the guest network on each of them, the config shows it as active, but it never shows up as visiible SSID. In previous posts, I've seen people saying that I need to do a complete hard reset of the router and re-enter all the configs again to get the guest network active. Is this true? I'd hate to think that I have to hard reset and reconfigure all three of these APs, just to get the guest network enabled.
View 2 Replies View RelatedI have the e4200 and I am having trouble getting DHCP reservation to work properly with my Windows 7 machines. Perhaps there is a step that I am missing. Basically I go to the DHCP reservation setup page, select my machine and add it to the reservation table. Then I save the changes. As soon as I do this my computer goes offline. If I reboot my machine, it is still offline. I've tried the same procedure to reserve the IP address for my phone and it works fine so I wonder if the problem is with Win7.
View 6 Replies View RelatedIs there a way to configure one of the GigE ports on the E4200 to only work on the "guest" network? Basically I have a need to setup one of those ports to get to the Internet, but I don't want it to be able to get to anything else on the private side.
View 1 Replies View RelatedI have a E4200 router and I was using it with a 1st generation MacBook Air for internet and also had my Samsung laser printer hooked up (USB) for wireless printing. It worked perfectly. Now I have upgraded to a new MacBook Air. The internet connection works fine, but printing won't work. Same printer. Same connections.
Do I need to refresh/reboot something? My new Mac has the printer driver. I get a message "printer if offline" "printer is not connected" -I feel like the router now does not recognize the new Mac's command to print.The older macbook air still works and prints wirelessly. The new one does not.
i'm trying to find out whether my e4200 has the possibility to be a local DNS server and if so, how I can configure it. As it is right out of the box, i cant ping any of my local machines on DNS.
View 4 Replies View Relatedi would like E4200 to get a PD from DHCPv6 server, and E4200 could assign address in PD to PCs connected to it by SLAAC/DHCPv6.could current E4200 FW 1.0.3 support this?
View 1 Replies View RelatedI've been messing around with this for several weeks to no avail. I've never had a problem establishing a VPN connection within my LAN. I've tried several workarounds, learning things in the processs, but to no avail.I've set up a VPN connection with Windows 7. The RRAS server is at home and I'm attempting to access from school (or the internet anywhere).I have no problem establishing the VPN connection (that I can see). Port 1723 is forwarded for both UDP and TCP to a static LAN address (198.162.1.124) in the E4200. PPTP pass-through is enabled (as well as the other two options).I can't see anything on the server after connecting. I'm using a DDNS. It works just fine INSIDE the LAN; I've even mapped a network drive to "S:". Accessing ANYTHING outside of the LAN over a VPN, however, isn't working. [code]
View 9 Replies View RelatedMy DIR-655 is setup and working fine with WPA personal encryption to different laptops in my home network. Question: Can I connect a wireless print server (LinkSys WPS54GU2) that only supports 'G' wireless encryption? Can the DIR-655 support a mixed N and G network?Do I have to reconfigure my DIR-655 to the slower WEP encryption and create an entirely 'G' network to include one G network device?
View 1 Replies View RelatedWould it be possible to change it to something else like serviio?
View 3 Replies View RelatedConnecting E4200 media server (external hard drive connected to USB in router) to PS3.mapped External HD to media server folder. and enabled UPnP Media Server. after trying all options I can't see media server in PS3.
View 6 Replies View RelatedI have a WD USB with approx 70,000 songs on it. When I try and scan the Music, it gets approx halfway though the songs, then the Media Servers stops all communications.
The only way I can get the Media Server to recover is to power cycle the E4200
The e4200 1.0.03 DHCP server appears to be quite buggy. After configuring a static IP / reservation for a client which already had a dynamic IP from the pool, the e4200 continued to offer this client its pool IP. However, the DHCP client listing in the e4200 showed the client having the static IP even though it was still being offered that pool address.This may sound like user error, but I can assure you, it is not. I have had a very frustrating experience with this product, and rather than fool with tech support again, I ran `tcpdump -e -s1600 -n -vvvv -i eth0 port bootpc or port bootps` to absolutely rule out a mistake on my part, bug in the DHCP client, etc. I found that the client was always offered that old IP, even thought the e4200 status display showed the "new" static one, after doing a DHCPDISCOVER without requesting a specific IP. This condition persists across e4200 reboots even after having the client release its lease!I finally was able to resolve this by forcing the client to request the static IP from the e4200.This is unquestionably a bug in the DHCP server, and additionally, the user interface does not show the real state of the underlying DHCP leases held by clients which have static addresses / reservations. Troubleshooting this condition is well beyond the abilities of the average user.
View 9 Replies View Related
