Cisco :: Installing Ciscoworks LMS 4.0 On Windows Domain Member Server
Sep 13, 2011I'm installing CiscoWorks LMS 4.0, and upgrade, on a domain member server running Windows 2008 R2 SE 64 bit.
View 1 Replies
ADVERTISEMENT
MSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?
Jan 10, 2013i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
Installing Windows 7 On Server 2008 LAN
Mar 24, 2012Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedInstalling Windows 7 Using GPOs On Server 2008
May 27, 2011What are step by step methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedDell :: Windows Server 2008R2 Is Not Installing Any Drivers
Sep 16, 2012I got a few of these NICs and Windows Server 2008R2 is not installing any drivers.
I tried downloading some drivers off Intel website and still no joy.
Since this is a Dell OEM product, how to get the correct set of drivers?
Cisco Infrastructure :: Installing Windows Server 2008 On UCS C210 M2?
Apr 12, 2013My new server Cisco UCS C210 M2, that has only one hard disk and I need to set up windows server 2008 R2 SP1 When I making the installation in the windows installation stage, the completing installation part the server is hanging and stop in this state I tried to change the windows image and still the same problem I need to know if there are a certain criteria like PCI configuration or any change on this server hardware before installing windows server 2008 R2 [URL]
View 1 Replies View RelatedReplace Adc Server In Windows 2003 Domain?
Jun 22, 2012Need to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies View RelatedWindows Vista - Domain Name Server Configuration Error
Jul 21, 2011I can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration."can't connect to well known host microsoft.com.
View 9 Replies View RelatedWindows Server 2008 - Unable To Add Computer In Domain?
Apr 23, 2011I have configured a my desktop as a domain controller with server 2008..with dns service running on it. When i tried adding another desktop to this domain, i get the following error message
"Troubleshooting network identification Error: This computer successfully resolved the Domain Name System (DNS) service (SRV) resource record required to locate a domain controller, but it failed to locate a domain controller for the Active Directory domain displayed in the error message.
Cause: The required A (address) resource records that map the name of the domain controller to its IP address do not exist in DNS.
Solution: Verify that the required A resource records do not exist in DNS by using the Nslookup command-line tool.
See also: To verify that A resource records exist in DNS. Cause: The domain controller advertised in DNS may not be connected to the network or is connected to the network but is not running.
Solution: Verify connectivity and then verify that the domain controller is running.
See also: To test a TCP/IP configuration by using the ping command; DNS requirements for joining an Active Directory domain."
Trust Relationship Failure Windows 7 To Server 2003 Domain
Jul 30, 2012When attempting to log in to a computer (running Windows 7 Professional) here at the office using the network administrator account, I get the error message: "The trust relationship between this workstation and the primary domain failed." I wasn't here when this laptop was set up, and so I don't know if any local user accounts were made or what their passwords would be if they were there, so I can't think of any way to log in to the machine and disconnect/reconnect to the domain which is really my only idea on how to fix it. Finding out what would cause this to suddenly start happening would also be nice, but mostly I just need to figure out how to get reconnected so I can get this back up and running.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.1.4 Any Version With Domain Controller On Windows Server 2008 R2
Feb 28, 2010Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
View 5 Replies View RelatedInstalling Asus M2n32 Sli Deluxe Wifi - Ap Solo Driver On Windows Server 2008
Apr 24, 2012Installed windows server 2008 and enabled wireless in the server manager but when I try to install any drivers for the wifi I get the error message "must install in windows 98 (SE), windows me, windows 2000, windows xp, win 2003, vista!"server 2008 uses vista drivers?
View 1 Replies View RelatedSecurity / Firewalls :: Windows Server 2003 Domain / Hardware Firewall?
Mar 29, 2011At my small business (30 employees) we currently don't have a hardware firewall. Should I have one? If so what do you recommend? We are all connected to a Windows Server 2003 domain in one office building.
View 7 Replies View RelatedCisco :: LMS 3.2 - How To List Ciscoworks Patches Installed On Server
Dec 10, 2011We have LMS3.2,CS3.3 and RME 4.3.1 on solaris 9 and I want to know what were cisco patches installed on the server in order to install other patches without any problem.
View 1 Replies View RelatedCisco :: CiscoWorks LMS 4.0 Fresh Installation On Windows 2008 R2?
Sep 18, 2011I'm installing CiscoWorks LMS 4.0 on a server running Windows 2008 R2 Standard Ed, 64 bit. I'm using the patch to run the setup program. Now I'm upgrading to 4.0.1 without using the patch.
View 1 Replies View RelatedCisco :: Installing LMS 4.2.3 For Windows Error?
Dec 23, 2012im trying to install Cisco prime LMS 4.2.3 for Windows 2008 R2 standard x64.however i have received this error message.
----- end of Dependency Handler Log File
-----Dependency Handler Errors
ERROR: csjre not found
ERROR: Component csjre is not found.
cdone : depends on :csjre
----- end of Dependency Handler Errors
[code]....
No Internet Connection After Re-installing Windows Xp
Feb 20, 2012Toshiba Portege, I have tried downloading their DriverTuner.exe and transfering it via Flash drive but it comes up with "Entry Point not found".
View 1 Replies View RelatedLAN Port Does Not Turn On After Installing Windows 8
Jul 6, 2012My PCI Ethernet LAN port seems dead after dual booting my dell Inspiron 5220 (Windows 7 Home Basic & Windows 8 PRO) and now LAN port is not detecting any plugged cable both and also not even in Linux live. In both OS network card driver is alright.Most searches over the internet opened up deep sleep mode as a reason of such failures.
View 6 Replies View RelatedCisco LAN :: 891 Router DNS Server Without Domain Name
Nov 8, 2012I have a 891 router setup as the local DNS server and external lookups from connected devices (and the router cli) work fine. I'm having problems getting internal host lookups working though.
this is relevent part of the config, router ip address is 192.168.100.9:
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.100.1
[Code]....
If I put rearswitch. (i.e. add a single full stop at the end of the hostname) it resolves fine. The same behaviour happens with other hosts defined with the ip host command. Is it possible to use local hostnames without a domain name or full stop?
Cisco :: Can Install LMS 4.0 On Domain Server
Oct 10, 2012I just wanted to know that can I install LMS 4.0 on a domain server.
View 1 Replies View RelatedHow To Pass From Domain Server
Jul 24, 2011how do I pass from domain server , my network in our compant have ISA server and they close some website like face book , how can I pass over ISA server and use my websites?
View 3 Replies View RelatedDomain Name Server Configuration
May 22, 2012I do not have wireless internet access and I get the message "There may be a problem with your Domain Name Server (DNS) configuration" when I try to diagnose the problem.I am on the internet by bypassing the router and having a wired connection from the modem to the computer right now. The problem started when I tried to get a second computer to work with the wireless connection (so with the computer I'm on right now, wireless worked a few days ago). [code]
View 9 Replies View RelatedInstalling Sonicwall Global Vpn Client 4.2 In Windows 7?
Mar 20, 2011When I start the installation of sonicwall vpn client 2.4 in Windows 7 that sends me the following message "unable to manage networking component. operating system corruption may be preventing installation".I use the version 2.4 Windows 7 32-bit?
View 2 Replies View RelatedCisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedCisco Wireless :: 881W Can't Set DNS Or Domain Server On AP
Feb 2, 2012I have a Cisco 881W configured for wireless (just a PSK, nothing special). I can get out to the Internet OK and browse to everywhere except my own websites.
It runs on a connection that does not connect directly to my network, but our website is available to the world externally.
Now, from the router a traceroute and ping work fine to our website but from the wireless connection I can get to everywhere else on the web but our website. A traceroute just stars out. I'm using 8.8.8.8 as a DNS server and nslookup resolves the DNS.
I can't set a DNS server or domain server on the ap on the 881W so are there any commands I can use to see what's going on?
HP Laserjet 4250 / Installing Additional Drivers On Print Server
Jan 17, 2011We have a Server 2008 R2 print server that handles all printing for our mixed windows domain. I am trying to install 64 bit drivers so that our newer 64 bit clients can simply double click on the printer to add it to their list of printers.
According to what I'm reading online, I'm supposed to go into the printer's properties. Click Sharing, then click additional drivers. Makes sense. I select the x64 for the processor type (x86 is checked by default and will not uncheck).
At this point it wants me to locate the drivers. I point it to the HP drivers that I have downloaded for 64 bit processors and hit ok but it tells me "The specified location does not contain the driver HP laserjet 4250 PCL 5 for the requested processor architecture." Which it does, although it is PCL 5e rather than PCL 5.
I also have read that the drivers need to have the same name. I assume this means within the INI file. I've tried to change all the locations to read PCL 5 instead of PCL 5e but it gives another error instead. "Windows cannot locate a suitable printer driver. Contact your administrator."
Servers :: How To Add 10 PC's To Server 2003 Domain
Mar 16, 2011how can i add 10 pc's to server 2003 domain
View 1 Replies View RelatedServer 2008r2 Cannot Find Domain Name
May 3, 2012I am wanting to setup a small network at home. I am using Server 2008r2 64 bit running on VMWorkstation, which is the only way I can run a 64bit OS. I have it installed and running on VM with active directory and a domain created. My problem is trying to join the domain with my other PC's. They cannot find the domain name. The network connection on the VM is set to NAT.
View 2 Replies View RelatedFile Server And Domain Controller?
Nov 22, 2012How has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedDell :: Studio 1737 Laptop / Installing Windows 7?
Jul 17, 2012I've got a customers laptop here which had Windows 7 64bit OS Installed when i received it. They wanted a fresh install with there own windows 7 disk (Which is in perfect condition) The problem I'm having is when the windows installation gets to a certain point i.e Completing Installation the resolution changes (which i know is normal) And then crashes!
View 3 Replies View RelatedDell :: 1535C Installing Windows 8 RP On Latitude / No Wireless
Jun 2, 2012I wait on Dell and other vendors to start pumping out Win 8 certified hardware, I have been running the Win 8 CP on my ST slate since February. With the release of RP this weekend I readily upgraded. Now i was able to get all functionality working previuosly but am now running into an issue with the wireless/BT card driver. Seems Microsoft sees the BT part of the Dell 1535C mini card but will not allow the wireless driver to load.
View 15 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 Fails To Send Files To Sftp Server After Installing Patch 5
Jul 21, 2011After we have installed patch 5 on several ACS 5.2 server they aren't able anymore to write their backups to the sftp servers. I tried to search on the bug tool kit, but it seems to be broken when searching for the keyword "sftp". It's the same when I try to do a "copy logs" with sftp as destination.running a debug I can see,
acs/admin# copy logs sftp://10.1.115.11/,Collecting logs...,Username: backupuser,Password: ,6 [16376]: transfer: cars_xfer.c[301] [admin]: sftp copy out of /var/tmp/ADElogs.tar.gz requested,6 [16376]: transfer: cars_xfer_util.c[412] [admin]: resolved server to 10.1.115.11,7 [16383]: transfer: sftp_copy.c[75] [daemon]: Executing SFTP command: /usr/bin/scp -o StrictHostKeyChecking=no /var/tmp/ADElogs.tabackupuser@10.1.115.11://ADElogs.tar.gz,% Error: Transfer failed3 [16376]: transfer: sftp_copy.c[230] [admin]: sftp_copy ERROR: command execution failed,3 [16376]: copy: cm_copy.c[1226] [admin]: Logs archive transfer to url sftp://10.1.115.11/ failed retcode=-306,acs/admin#
SQL Server Lost Connection With Domain Controller
Dec 6, 2011I have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies View Related
