No Internet Connection After Re-installing Windows Xp
Feb 20, 2012Toshiba Portege, I have tried downloading their DriverTuner.exe and transfering it via Flash drive but it comes up with "Entry Point not found".
View 1 Replies
ADVERTISEMENT
Windows 7 Enterprise - Lost Connection After Installing MS Office 2010
Jan 24, 2011I lost my network connection after installing Microsoft office 2010.. what can I do to get it back ? I know it is this as i have been fussing with my computer all day.. I created a system restore point just before I installed it.. had network connection.. installed office 2010 and now once I rebooted I dont.. I am running Win 7 enterprise.
View 8 Replies View RelatedLAN Port Does Not Turn On After Installing Windows 8
Jul 6, 2012My PCI Ethernet LAN port seems dead after dual booting my dell Inspiron 5220 (Windows 7 Home Basic & Windows 8 PRO) and now LAN port is not detecting any plugged cable both and also not even in Linux live. In both OS network card driver is alright.Most searches over the internet opened up deep sleep mode as a reason of such failures.
View 6 Replies View RelatedInstalling Windows 7 On Server 2008 LAN
Mar 24, 2012Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedCisco :: Installing LMS 4.2.3 For Windows Error?
Dec 23, 2012im trying to install Cisco prime LMS 4.2.3 for Windows 2008 R2 standard x64.however i have received this error message.
----- end of Dependency Handler Log File
-----Dependency Handler Errors
ERROR: csjre not found
ERROR: Component csjre is not found.
cdone : depends on :csjre
----- end of Dependency Handler Errors
[code]....
Installing Sonicwall Global Vpn Client 4.2 In Windows 7?
Mar 20, 2011When I start the installation of sonicwall vpn client 2.4 in Windows 7 that sends me the following message "unable to manage networking component. operating system corruption may be preventing installation".I use the version 2.4 Windows 7 32-bit?
View 2 Replies View RelatedInstalling Windows 7 Using GPOs On Server 2008
May 27, 2011What are step by step methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedDell :: Studio 1737 Laptop / Installing Windows 7?
Jul 17, 2012I've got a customers laptop here which had Windows 7 64bit OS Installed when i received it. They wanted a fresh install with there own windows 7 disk (Which is in perfect condition) The problem I'm having is when the windows installation gets to a certain point i.e Completing Installation the resolution changes (which i know is normal) And then crashes!
View 3 Replies View RelatedDell :: 1535C Installing Windows 8 RP On Latitude / No Wireless
Jun 2, 2012I wait on Dell and other vendors to start pumping out Win 8 certified hardware, I have been running the Win 8 CP on my ST slate since February. With the release of RP this weekend I readily upgraded. Now i was able to get all functionality working previuosly but am now running into an issue with the wireless/BT card driver. Seems Microsoft sees the BT part of the Dell 1535C mini card but will not allow the wireless driver to load.
View 15 Replies View RelatedDell :: Windows Server 2008R2 Is Not Installing Any Drivers
Sep 16, 2012I got a few of these NICs and Windows Server 2008R2 is not installing any drivers.
I tried downloading some drivers off Intel website and still no joy.
Since this is a Dell OEM product, how to get the correct set of drivers?
Home Network :: Partition Hard Disk After Installing Windows OS?
Jul 12, 2011Is it possible to partition the hard disk after installing the Windows OS?
View 9 Replies View RelatedLinksys Wireless Adapters :: Installing WUSB600N Driver For Windows 7?
Jul 31, 2009I don't know how to install this driver - I didn't see a .exe file or a "setup" icon
View 9 Replies View RelatedLinksys Wireless Router :: Installing WUSB54GSC Drivers On Windows 7?
Jul 14, 2009Started a fresh installation on windows 7 RC 64 bit popped in adapter, and tried installing disk, disk would get the portion where it asked to input the adapter, then just vanish after i click next. I restarted, nothing. I clicked set up again, says drivers are already installed....though there is no app to show profiles, im guessing it isn't.
[URL]
version 1.00 would work just like the disk. version 2.00 would not start at all and would give an "the application was unable to start correctly (0x0000005).."
Linksys Wireless Adapters :: Installing WMP600N With Windows 7 64bit?
Dec 26, 2009I have tried running all versions of the setup program that came with the adapter. Even when I ran the compatibility program I still get error 211 adapter not recognized. When I looked in the device manager the adapter is listed but with problems. Under properties it shows windows cannot load the drivers required for this device error 31. I also tried updating the drivers from the device manager using the ones I downloaded directly from linksys website. The ones for the 64 bit windows 7?
View 9 Replies View RelatedCisco :: Installing Ciscoworks LMS 4.0 On Windows Domain Member Server
Sep 13, 2011I'm installing CiscoWorks LMS 4.0, and upgrade, on a domain member server running Windows 2008 R2 SE 64 bit.
View 1 Replies View RelatedDell :: Inspiron 1520 Not Detecting Wi-Fi Networks After Installing Windows 7
Apr 14, 2012I have a Inspiron 1520 which came with windows Vista and I recently did a Windows 7 clean installation. There were no drivers specified for Windows 7 in Dell Driver Download so I installed Vista drivers, connected to internet via LAN Cable and upgraded most of the drivers.
WiFI networks could be detected when installed for the first time but after a shutdown it never detects again. Sometimes it randomly detects, I tried using the laptop for 2 weeks now and only 2 times the WiFI automatically came up.
There is a switch to pull after turning on WiFI radio, which will display the list of WiFi networks in a window, that Switch is not responding now.
Cisco Infrastructure :: Installing Windows Server 2008 On UCS C210 M2?
Apr 12, 2013My new server Cisco UCS C210 M2, that has only one hard disk and I need to set up windows server 2008 R2 SP1 When I making the installation in the windows installation stage, the completing installation part the server is hanging and stop in this state I tried to change the windows image and still the same problem I need to know if there are a certain criteria like PCI configuration or any change on this server hardware before installing windows server 2008 R2 [URL]
View 1 Replies View RelatedAfter Wiping Windows Vista And Installing XP DPC2203 Cable Modem Won't Connect
Jan 7, 2012I wiped vista and installed windows Xp now my modem wont recognize and i dont have internet. i have tried burning the Drivers from Cisco onto another CD From another Machine but it says it needs internet connection to do so. i can't connect or anything i have a DPC2203 cable modem?
View 1 Replies View RelatedLinksys Wireless Adapters :: Access Denied Installing Windows 7 Drivers WMP600N
Nov 7, 2009I just bought a WMP600N adaptor and although windows 7 recognizes it I would like to install the official drivers from Linksys. When I try to update the drivers that I downloaded from the linksys website I het an access denied error. I am logged in as the administrator. I have already tried uninstalling the default drivers, but still I get the access denied error. I even tried the windows safe mode and still got the access denied error.
With the default windows 7 drivers the connection is quite poor. how I can install the official windows 7 drivers?
No Connection After Installing Ddwrt Firmware?
Dec 1, 2012I have a WRT54G2 V1 linksys wireless router. I was going to upgrade it to DD-WRT and install it at my mother's house. It was working before upgrading it to dd-wrt. I followed the directions located at:Linksys WRT54G2 v1.0 - DD-WRT WikiAfter following the directions and doing a hard reboot I was able to log into the router but was unable to connect to the internet via WiFi and/or Ethernet.My internet enabled TV and wireless labtop detected the ssid made by the router but could not connect to the internet. I am able to connect to the internet using a old Netgear WGR614 v6 router.
View 7 Replies View RelatedInstalling Asus M2n32 Sli Deluxe Wifi - Ap Solo Driver On Windows Server 2008
Apr 24, 2012Installed windows server 2008 and enabled wireless in the server manager but when I try to install any drivers for the wifi I get the error message "must install in windows 98 (SE), windows me, windows 2000, windows xp, win 2003, vista!"server 2008 uses vista drivers?
View 1 Replies View RelatedPc Lost Connection With Wifi After Installing A New Printer And Cannot Reconnect?
Jan 8, 2012went to uninstall the other two and then went to install our new one on the main computer.I have now lost connection with the wifi to this pc and only this one. (the internet still works on two laptops) unfortunately i need this computer for work and therefore need the internet quite urgently. Perhaps uninstalled something by accident and if so what is it and what can i download?
View 3 Replies View RelatedCisco Firewall :: Installing ASA5505 On Home Network For VPN Connection?
Feb 25, 2013I have been asked to install a ASA5505 on a home network. The home network has a home broadband connection which the ISP provider supplies with an IP address. This is only for 6 weeks until the new line comes in. I know this is going to cause problems but we have no choice but to impletment this.
My questions are below.
1, We have a home hub supplied by the ISP which is configured by an IP address which is NOT static. Can we not use the ASA 5505 instead. I know that if our ISP change the IP address we have to change the IP address on the 5505.
2, Will we be able to use the home network broadband to create a secure connection?
Cisco WAN :: Http Connection Failures After Installing C2960G Switches
Mar 7, 2012I have seen this at two sites now: after migrating the site T1 to 10-Mbps Opt-E-MAN and replacing old 10/100 switches with 10/100/1000 switches, users frequently get http connection errors. The error goes away if the user reloads the page--sometimes they have to reload more than once. They never had this problem before.I thought it was due to the large number of 5-port desktop switches infesting the networks (I'm getting rid of them as fast as I can) but it happens even on a PC directly connected to one of the new GigE switches. It does not happen when accessing internal web pages. It looks like a DNS failure -- but nothing has changed in our DNS setup, except that users have a fatter pipe to our DNS servers.
View 3 Replies View RelatedHow To Get Windows 7 To Use Specified Internet Connection
Jun 8, 2012I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Currently automatic metric on all adapters.LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top.Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41.
Netstat shows LAN then USB. ipconfig shows LAN then USB.But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection.I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table.Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic)Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less))For some reason restarting USB is resetting LAN setting when reconnected.
Internet Browser Won't Connect To Internet After Installing XP SP2
Aug 30, 2011I have Windows xp professional 64 bit os and after installed sp 2 my internet browser don't connect to internet I can connect to skype..
View 4 Replies View RelatedTp-link 300mbps Wireless :: Tl-wr1043nd No Vlan / Wifi Connection After Installing
Dec 9, 2012Region : Netherlands
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : V1_120405
ISP : UPC
After buying and installing i get no wlan/wifi connection.I do have internet by ethernet, the laptops and ipad sees the wlan/wifi but get no connection? Resetting re-installing manualy or with the wizard doesn't work.
Internet Connection Sharing Between 2 Windows 7 PC?
Jul 15, 2011I newly installed win 7 in 2 pc's. I had used the internet connection sharing when I had Win xp installed in them before. So I gave the static IP address,192.168.0.1 to the pc with the internet connection, and had the other pc obtained the IP address automatically. File sharing works fine, but somehow the 2nd PC could not be connected to the internet. When I checked its connection details, the Autoconfiguration IPv4 Address was 169.254.224.63. I think this IP address should be something like 192.168.0.xxx, but it's configured to auto, so I can't really do anything right now
View 1 Replies View RelatedWindows 7 Pc After Internet Connection It Goes Off Immediately?
Jun 14, 2012my win 7 desktop always disconnect from internet connection after it has been connected and i ran network diagnosis wizard it was saying DNS ERROR CONNECTION. All other systems in my office use the same dns address.
View 3 Replies View RelatedCannot Share Internet Connection Windows 7
Sep 8, 2011new laptop running windows 7 home premium? i connect to the internet using mobile broadband device which works fine but i have been trying for a week now to share that connect with my local area network connection to access my ps3 (as i did with xp) to no success. 1st the LAN states that is is an "unidentified network: so when i tried to set up internet connection sharing, it would say that the wimax network adapter was "shared" but there would be no internet or network access though LAN. now i cannot even start ics as i am getting an error message that states "an error occurred while Internet Connection Settings was being enabled (null)..
View 2 Replies View RelatedInternet Connection Slower On Windows 7?
Mar 3, 2011I ran an xp computer for a long time, in WoW i had a latency of around 100-120 which wasnt that bad. Now I built a computer with Win7(64bit) and the latency varies from around 250-370ms.
View 6 Replies View RelatedBridging Internet Connection With Windows 2k8?
Jul 18, 2011I currently work as a business analyst for a national sales team. I essentially work off of my own server, and just use remote instances to access the database. I am having trouble accessing the internet with the server all I have is intranet(local) access.Since my notebook(with working internet access) is on the same network as my server I feel like I should be able to bridge the network connection on my notebook to work within the server, so I can run updates.
View 3 Replies View RelatedSet Password For Lan Internet Connection For Windows 7?
Jan 16, 2013i am using windows 7 and a lan network connection how to set up a password for the connection
View 1 Replies View Related