I lost my network connection after installing Microsoft office 2010.. what can I do to get it back ? I know it is this as i have been fussing with my computer all day.. I created a system restore point just before I installed it.. had network connection.. installed office 2010 and now once I rebooted I dont.. I am running Win 7 enterprise.
View 8 RepliesNo Network connection after Office 2010 install, I have limmited or no connectivity. I've removed and reloaded drivers, reset router, performed a netsh flush, tried to manually connect, kicked it, threw something at the wall and still no luck.
View 6 Replies View Relatedwent to uninstall the other two and then went to install our new one on the main computer.I have now lost connection with the wifi to this pc and only this one. (the internet still works on two laptops) unfortunately i need this computer for work and therefore need the internet quite urgently. Perhaps uninstalled something by accident and if so what is it and what can i download?
View 3 Replies View RelatedLost pin number for Microsoft 2010?
View 1 Replies View RelatedToshiba Portege, I have tried downloading their DriverTuner.exe and transfering it via Flash drive but it comes up with "Entry Point not found".
View 1 Replies View RelatedWe have cisco 1941 as router in office, it's dhcp server, it has only vlan 1 192.168.4.0/24?I've set up 1142 ap for wireless clients How can i make it give clients ips from dhcp server from vlan 1 ?
View 11 Replies View RelatedI FORMATED THE HARDRIVE AND REINSTALED XP NOW NO INTERNET AND NO AUDO I USING A LATUDE LAPTOP
View 1 Replies View RelatedAt power on and off on my laptop, the wireless internet connection is lost on windows 7.
View 1 Replies View RelatedI have PC System Windows XP home edition Version 2002 SP3 and I lost Internet access in the middle of downloading a new program. I have a Motorola modem and modem is connected to the Netgear router. When I turn my desktop PC on which is connected to the router it shows the local connection is connected, but the Bridge Network cable is unplugged I have no idea what that is and if I need it to be connected to the internet. I called the Comcast service and the lady assistant did not even know what the Bridge cable is and I do not know ether since. I do not know what I should do to get the connection back to the PC; another PC work just fine also is connected to the router.
View 1 Replies View RelatedI want to work on quickbooks 2010 pro between my desktop which is windows vista and my lap top windows 7. I will be the only user, how do i set this up?
View 3 Replies View RelatedI have a new dell computerMy problem is the computer doesn't start-up and instead he pop-up the error message "BOOTMGR is Missing"I tried to install "windows 7 enterprise" but no success the problem has back again.
View 3 Replies View RelatedSince SBS can't do trusts, and there are about 50-75 user and computer accounts in AD for this project, I will probably have to do a lot of manual work for the migration process to Server 2008 R2. Any checklist, or some links, that would be useful for this (e.g., staging migration, best practices)? I'd like to make the less amount of problems for myself in the long run.
Some notes:
1. All servers will be virtualized, with the exemption of one of the two DCs being a physical server.
2. Exchange 2003 will be going on its own Windows Server 2008 R2 server, and I believe Exchange Server 2007 or 2010 will be installed.
3. Will probably use robocopy to move data from the old shared folders to the new shared folders (but without permissions).
4. Folder structures and NTFS permissions will be done manually...(unless there's a nicer way of doing this, similar to ADMT?)
After change my OS to Windows 7 Pro Enterprise my Dell E5430 missing the network controller driver. let me know the right driver to download and install.
View 4 Replies View RelatedMy PCI Ethernet LAN port seems dead after dual booting my dell Inspiron 5220 (Windows 7 Home Basic & Windows 8 PRO) and now LAN port is not detecting any plugged cable both and also not even in Linux live. In both OS network card driver is alright.Most searches over the internet opened up deep sleep mode as a reason of such failures.
View 6 Replies View RelatedAny methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View Relatedim trying to install Cisco prime LMS 4.2.3 for Windows 2008 R2 standard x64.however i have received this error message.
----- end of Dependency Handler Log File
-----Dependency Handler Errors
ERROR: csjre not found
ERROR: Component csjre is not found.
cdone : depends on :csjre
----- end of Dependency Handler Errors
[code]....
When I start the installation of sonicwall vpn client 2.4 in Windows 7 that sends me the following message "unable to manage networking component. operating system corruption may be preventing installation".I use the version 2.4 Windows 7 32-bit?
View 2 Replies View RelatedWhat are step by step methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedI've got a customers laptop here which had Windows 7 64bit OS Installed when i received it. They wanted a fresh install with there own windows 7 disk (Which is in perfect condition) The problem I'm having is when the windows installation gets to a certain point i.e Completing Installation the resolution changes (which i know is normal) And then crashes!
View 3 Replies View RelatedI wait on Dell and other vendors to start pumping out Win 8 certified hardware, I have been running the Win 8 CP on my ST slate since February. With the release of RP this weekend I readily upgraded. Now i was able to get all functionality working previuosly but am now running into an issue with the wireless/BT card driver. Seems Microsoft sees the BT part of the Dell 1535C mini card but will not allow the wireless driver to load.
View 15 Replies View RelatedI got a few of these NICs and Windows Server 2008R2 is not installing any drivers.
I tried downloading some drivers off Intel website and still no joy.
Since this is a Dell OEM product, how to get the correct set of drivers?
Is it possible to partition the hard disk after installing the Windows OS?
View 9 Replies View RelatedI don't know how to install this driver - I didn't see a .exe file or a "setup" icon
View 9 Replies View RelatedStarted a fresh installation on windows 7 RC 64 bit popped in adapter, and tried installing disk, disk would get the portion where it asked to input the adapter, then just vanish after i click next. I restarted, nothing. I clicked set up again, says drivers are already installed....though there is no app to show profiles, im guessing it isn't.
[URL]
version 1.00 would work just like the disk. version 2.00 would not start at all and would give an "the application was unable to start correctly (0x0000005).."
I have tried running all versions of the setup program that came with the adapter. Even when I ran the compatibility program I still get error 211 adapter not recognized. When I looked in the device manager the adapter is listed but with problems. Under properties it shows windows cannot load the drivers required for this device error 31. I also tried updating the drivers from the device manager using the ones I downloaded directly from linksys website. The ones for the 64 bit windows 7?
View 9 Replies View RelatedI'm installing CiscoWorks LMS 4.0, and upgrade, on a domain member server running Windows 2008 R2 SE 64 bit.
View 1 Replies View RelatedI have a Inspiron 1520 which came with windows Vista and I recently did a Windows 7 clean installation. There were no drivers specified for Windows 7 in Dell Driver Download so I installed Vista drivers, connected to internet via LAN Cable and upgraded most of the drivers.
WiFI networks could be detected when installed for the first time but after a shutdown it never detects again. Sometimes it randomly detects, I tried using the laptop for 2 weeks now and only 2 times the WiFI automatically came up.
There is a switch to pull after turning on WiFI radio, which will display the list of WiFi networks in a window, that Switch is not responding now.
My new server Cisco UCS C210 M2, that has only one hard disk and I need to set up windows server 2008 R2 SP1 When I making the installation in the windows installation stage, the completing installation part the server is hanging and stop in this state I tried to change the windows image and still the same problem I need to know if there are a certain criteria like PCI configuration or any change on this server hardware before installing windows server 2008 R2 [URL]
View 1 Replies View RelatedI wiped vista and installed windows Xp now my modem wont recognize and i dont have internet. i have tried burning the Drivers from Cisco onto another CD From another Machine but it says it needs internet connection to do so. i can't connect or anything i have a DPC2203 cable modem?
View 1 Replies View RelatedI just bought a WMP600N adaptor and although windows 7 recognizes it I would like to install the official drivers from Linksys. When I try to update the drivers that I downloaded from the linksys website I het an access denied error. I am logged in as the administrator. I have already tried uninstalling the default drivers, but still I get the access denied error. I even tried the windows safe mode and still got the access denied error.
With the default windows 7 drivers the connection is quite poor. how I can install the official windows 7 drivers?
I have a very high speed connection in my dad's office, and it is over 10 mbps. and the connection in my house is worse ( 256 kbps ). So can I use the office connection in home without any problems from the ISP. just like sharing the connection from the office to home.
View 7 Replies View RelatedI have a WRT54G2 V1 linksys wireless router. I was going to upgrade it to DD-WRT and install it at my mother's house. It was working before upgrading it to dd-wrt. I followed the directions located at:Linksys WRT54G2 v1.0 - DD-WRT WikiAfter following the directions and doing a hard reboot I was able to log into the router but was unable to connect to the internet via WiFi and/or Ethernet.My internet enabled TV and wireless labtop detected the ssid made by the router but could not connect to the internet. I am able to connect to the internet using a old Netgear WGR614 v6 router.
View 7 Replies View RelatedInstalled windows server 2008 and enabled wireless in the server manager but when I try to install any drivers for the wifi I get the error message "must install in windows 98 (SE), windows me, windows 2000, windows xp, win 2003, vista!"server 2008 uses vista drivers?
View 1 Replies View Related