No Network connection after Office 2010 install, I have limmited or no connectivity. I've removed and reloaded drivers, reset router, performed a netsh flush, tried to manually connect, kicked it, threw something at the wall and still no luck.
View 6 RepliesI lost my network connection after installing Microsoft office 2010.. what can I do to get it back ? I know it is this as i have been fussing with my computer all day.. I created a system restore point just before I installed it.. had network connection.. installed office 2010 and now once I rebooted I dont.. I am running Win 7 enterprise.
View 8 Replies View RelatedI reinstalled my windows7 again, because my laptop was jamming so much. But i cant connect to internet via wireless. I dont have any other options to connect my computer to internet other than using wi fi. I think it says i didnt install the wifi driver. i tried something, but it didnt work. btw i have inspiron 15r bought in the end of 2010
View 16 Replies View RelatedI want to work on quickbooks 2010 pro between my desktop which is windows vista and my lap top windows 7. I will be the only user, how do i set this up?
View 3 Replies View RelatedI have 2 older xp pro tough books that connect to my domain via a pair of versa vx 400 access points. automobile technicians use these computers to communicate with cars via a separate wireless card and WiFi device (SPX MVXI) that broadcasts a wireless signal.they always connect just fine to the network but sometimes they drop there connection and don't rejoin which screws up my scheduled tasks (nightly upload). They will reacquire the connection every time if i select it again manually in the windows wireless config.here is what I have done so far
1. set up exclusion range in DHCP distribution on my DC
2. set the laptops up with static IP's within the exclusion range.
3. configured the laptops to auto connect to the network even when its not broadcasting
4. set the access points on channel 7, and the devices on 1 and 11.
I have done a lot of research on this issue, a rep from versa told me that Intel proset wireless isn't very compatible with there product which i this is BS since it does the same with with the netgear WiFi PC cards.
I am puzzled about some problems that occured at my work place. Unmanaged switch like D-link & Linksys was used and it worked pretty fine only for certain areas of the factory. Then office with more workers will be using managed switch to ensure the workers have decent connection to the local server.
Question is, why are some small offices' connection so ridiculously slow?
*Info*
The switches manage 4PCs
Tested - The main connection cable cannot go through the switch to distribute the connection. Even if there is only 1 PC linked to the switch, it will still be slow. It will be at it's max if it didnt go through the switch, but directly to the PC instead.
True enough that unmanaged switch aren't smart enough to allocate the speed, but why is it possible for some other part of the small office to have fast connection even by using the normal unmanaged switch?
We have a ASA 5505 setup with VPN and using Cisco client 5.0. The VPN works without a problem if we use normal internet access (from home, motel, etc). However if we use a cellular wi-fi hotspot or tether a phone it will connect to the vpn but will not allow us to get on the office network
View 1 Replies View RelatedRegion : Spain
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22
ISP :
I am trying to set up a VPN access to the office Windows network by setting the pptp options in the WAN area of the networks settings.
I have entered the public IP address of the office network and also the username and password required by the system. When clicking on the connect button the router attempts to connect but then returns a "disconnected" message.
How do I set my network key in Microsoft Word 2010
View 1 Replies View RelatedI can't install or extract any file or archive downloaded through shared connection from the 1st PC via a LAN ... tried new LAN and tried switch the LANs but doesn't work always a CRC error when extract an archive or file corrupted when install anything downloaded:this is what I tried so far
-tried download and extract on a 2nd installed windows (I have dual boot) and its same CRC error
-tried another non built-in LAN card pci-E x1 and its the same CRC error
-tried restore bios to default and its same CRC error
-tried putting a laptop on the same line instead of my PC and it works no errors no problems
I'm setting up a Network Monitoring System in Nagios and Nagvis. Now, I want to monitor the cpu and memory of the switches SGE2000 and SGE2010 with SNMP. Does the OID for the switches SGE2000 and SGE2010 (CPU and Memory).I can't not seem to find them on the Internet(searched for hours).
View 1 Replies View RelatedI have a very high speed connection in my dad's office, and it is over 10 mbps. and the connection in my house is worse ( 256 kbps ). So can I use the office connection in home without any problems from the ISP. just like sharing the connection from the office to home.
View 7 Replies View Relatedi just managed to config the Cisco 877 and send it to my client,when the client connect the router from his location the router can't make VPN connection to my HQ office,i can connect to the router using the external IP adress,i tried to reset the VPN tunnel but no avail,
View 3 Replies View RelatedWe have a WAP2000 that supports a few wireless users in a shop environment. Users authenticate using RADIUS. Users connect without issue and can browse the Internet.
The main local network uses a Cisco 800 router to connect to the Internet via DSL and there is an IPsec VPN tunnel to our main office.
When a user is connected to the network via a wired connection, all systems work as expected. If they are on wireless, they cannot connect to services at the main office. They must make a PPTP VPN connection for applications to function.
The WAP2000 has the latest firmware 2.0.4.0. It has a static IP on the local subnet.
I'm not being able to wireless distribute the office LAN int-con via recently purchased Tp-link tl-wr740n wireless n router'. Actually, I had no problems with my USR 8054 wireless router before I decided to replace the router with an 'N' one as I experienced some connection loss on my mac book pro(mac osx 10.8) thru USR 8054. The internet connection I have is from a wall socket in my office. I know the hub/router/switch or whatever behind has no DCHP activated because the device connected to that socket cannot get an IP, you must enter it manually together with gateway, DNS etc.. and the values are as
ip 10.50.31.108
subnet 255.0.0.0
gateway 10.50.31.254
Whenever I enter these on my USR's 'static IP configuration' via quick setup and plug the Ethernet cable from the wall socket to the WAN, it works and the router immediately starts to let me surf on the net wireless. However, the same procedure has never succeeded on my Tp-link with its latest original firmware or dd-wrt. It even says no cable connected although it is connect from the wall socket to its WAN.I also tried to connect my computer directly to the wall socket with a regular Ethernet cable and entered the ip, gateway etc manually. It didn't work at first, then I changed IPv6 setting from ''auto'' to ''local connection only'' and I was able connect to the internet with no trouble.
My current IT people are so expensive, I am determined to hook up a new laptop to my office network if it destroys me (wirelessly). I have the office network map with all usernames, passwords, and IP addresses...but I can't figure it out. Can someone give me a step by step for dummies to save me the several hundred or should I just bite the bullet? (I am the business owner and seems like we add laptops every year or so and desktops and would really love to finally understand)
View 1 Replies View RelatedMy current set-up is: my laptop connects to the coaxial outlet with a cable so I can access the internet. So I can't really bring it somewhere else since the cable is short.
Now, I am planning to buy 2 more computers and a printer. The printer will be shared by all 3 computers. what else I need to buy (modem?? wireless router??) and what type. I also request that you let me know how to set it up. Of course, I will follow the manufacturer's instructions.
I would like to connect my three pcs together so that they can all make use of the printers, scanners, internet etc in my office space. i also need to be able to access this lot from a remote laptop so that i can continue to work from home. i would like to store all my data in one place that was easily accessible from every PC and my laptop.
View 2 Replies View RelatedI wanna setup a small office network ? how do I setup and can I use a printer on this LAN ??
View 3 Replies View RelatedSometimes my office network stopped than work lan cable good but network problem more than time same problem.
View 1 Replies View RelatedI would like to add my HP designjet 500 to our wireless network at the office.
View 2 Replies View RelatedHow do I create a small office network?
View 1 Replies View RelatedI have been tasked with the technology update of our office and have have MAJOR questions which I hope can be answered here, so here goes;
First a little history, I have an electronics degree and a certificate in computer technology, so computers are not something new to me, however networking IS.I have a VERY LIMITED budget to work with, which I'm sure is not unheard of before, with the following equipment already available:
1 MFP currently on lease connected via network
3 totally junk PCs running 3 different versions of Windows from XP to 7
A DSL internet connection
A wireless router
A wired 8 port switch
What I would like to do is begin with a basic server, 7 clients, shared internet on all machines (including external via login), An MFP, at least 1 NAS for data storage, 1 NAS for backup of all drives.
What are my best options to secure branch office connection to HQ over Provider MPLS cloud. Our existing Setup
<<HeadQuarter>> :: DataCenter hosting Email, ERP, Intranet, Voice Services 10mb link to Service Provider over MPLS CloudMPLS is terminated on a 3825 Router running advance Services
<<BrancOffice>>::Total 10 In Country Branch Offices2mb Link to Service Provider over MPLS CloudTotal users in each branch : 20 MPLS is terminated on a 2811 Router running advance Services
In Outlook 2003, I am receiving mail from all others on the office network except one person and wondering what I can check to fix this
View 5 Replies View RelatedWhat are the best network engineering practises for a small/medium sized office?Currently I have set it up like this:The top floor has all the sales people, each desk has a hub underneath which connects all computers at that desk together, and the hum is connected to a switch under the floor. There are about about 8 desks each with about 4 computers, so 8 hubs.They all go into a 10/100 switch, which is then connected to an 1gb switch on the bottom floor via a 1gb port on the top floor switch, via a cat6 cable.We then have internet > modem > router > the 1gb switch. Our main server is also connected to that switch along with all the computers for the ground floor, except these computers have 1gb switches under the desks instead of hubs. The main server is the DHCP, DC, DNS and file server. We have also setup another server which acts as a backup DC and is also a DNS server.Is there anything wrong with this configuration? We have been having problems with the router losing connection to the internet and warnings on the main DNS server.
View 6 Replies View RelatedI have a wireless router (D-Link DIR-625) connected to the modem for our high speed DSL. I have two Brother MFC printers, one is a laser (MFC-9420CN) connected w/ a Cat-5 directly to the router, the other is an ink-jet MFC-6490CN and I would like to use it wireless....but I could connect it to the router if I need to.I have wireless connection to the internet, from my HP 32-bit PC (running Vista-Ultimate), but can not see either of the printers on the network, and cannot print to either. I manually configured both to have an IP within the range of my network, but they still do not work.The problem (I think) could be with the IPCONFIG. (I had no problem last year, but we recently had a few power outages, and now the PC doesn't seem to 'see' any of the printers.) I checked the IPCONFIG. it states 'media disconnected', but I can ping the one wireless printer??? I can not ping the laptop on the network or the laser printer (I confirmed it's ipconfig before pinging).
I know the network card can't be bad, or I couldn't get to the router to access the internet. I also went into the cmd prompt as the administrator and did the /release/renew/all but that didn't work either.
I presently have a fiber internet connection to my office with about 40 wireless users on a single AP. The connection keeps dropping. Probably due to too many users on a single AP?
1. My question is similar to aniketchitale's, can get another wireless router, create a different SSID (eg. router1 and router2), but both wireless routers still connected to the same fiber connection. In other words, I would like to segregate the first 20 users to router 1 and the next 20 users to router 2.
2. By having 2 wireless routers each with their unique SSID, will all the users still be able to access to the same printer in the office?
I have just moved into a new office and I have free internet, but I would like to set-up my network multi function printer in the same office.I don't have a router in my office I just have the socket (presumably from the building owners cabinet). Adding another network card.I tried removing the internet cable from my PC and setting up the printer by creating a TCP port but it didn't work. (I used to do this with my HP 1050tn).RouterI tried adding a router but that didn't work either.
View 6 Replies View RelatedHow do I find the network security key for my office desktop
View 1 Replies View RelatedHow do I go by setting up a small network in my office with 3 computer. Reason is to share files, printers, internet.
View 1 Replies View RelatedI have one HP Desktop that decided one day it doesnt want to connect to the internet.
On the network we have two HP desktops (wired), one Dell desktop (wired) and 2 dell laptops (wireless) all connected to a wireless D-Link DIR 655 router . All computers are running Windows XP. All are able to connect to the internet except one HP desktop (only recently).
I have tried connecting the HP desktop in question to the wireless router via a different cable and still no connectivity. I tried disabling and renabling the internet/repairing it to no avail. I've restarted the wireless router and modem. Nothing. I've even tried restarting the computer (who knows it's solved problems before).
I use vpn to connect to another organization from my office and on the same network where my printer resides, if i logon to the vpn printing to my local printer becomes a problem, I can also print to my local printer.
View 2 Replies View Related