TP-Link 300Mbps Wireless :: TL-WR842ND VPN Connection To Office Network?
Jan 8, 2013
Region : Spain
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22
ISP :
I am trying to set up a VPN access to the office Windows network by setting the pptp options in the WAN area of the networks settings.
I have entered the public IP address of the office network and also the username and password required by the system. When clicking on the connect button the router attempts to connect but then returns a "disconnected" message.
View 5 Replies
ADVERTISEMENT
Nov 27, 2012
Region : Poland
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
I recently bought an new router TP-LINK TL-WR842ND. After configuring it I connected it via an cable connection to my PS3. The Internet connection works correct and I'm able to use all network feature on my console.
Then I connected a USB Hard Drive to it USB port and I enabled Media Server feature on the router. I have done steps described here url... but with no results. My PS3 sees the Media Server, but when I open it it shows no files.
View 7 Replies
View Related
Mar 1, 2013
Region : Australia
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.24 Build 130110 Rel.58124n
ISP :
The wireless drops out on my router every 1 or 2 days. I checked the LED on the router and it goes off when this occurs.I have attempted to turn WiFi back on using the 'on/off' button on the rear but it still won't work. The only remedy is to pull the power plug for a few moments and plug it back in.
View 9 Replies
View Related
Dec 22, 2012
Region : UnitedStates
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22
ISP : Bright House Networks
I'm having a problem as my PS3 keeps showing up as UPnP not available even though it is turned on in the router menu. What can be the cause? I want to say there is something wrong with the PS3 and not the router.
View 6 Replies
View Related
Feb 27, 2013
Region : Singapore
Model : TL-WR842ND
Hardware Version : V1
Firmware Version :
ISP : Starhub
Is it possible to use VLC to access the TP LINK Media Server? I have sucessfully setup the Media Server, but unfortunately I do not know how to access it using VLC or android MX player.
View 1 Replies
View Related
Dec 10, 2012
Region : Sweden
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : wr842ndv1_en_3_12_22_up(120424).bin
ISP :
My normal FTP download speed is 1-2 GB/Sec but downloading from the routers USB port only gives 200KB/Sec. How to improve the server speed? Another question: How many users can log in/download at the same time?
View 3 Replies
View Related
Dec 9, 2012
Region : Vietnam
Model : TL-WR842ND
Hardware Version : V1
Firmware Version :
ISP :
Everything seems so good until I setting up the printer server. Resources CD contains the "USB Print Service Client Setup" but the User Guide said that I have to install "TP-LINK USB Printer Controller Setup". First, I tried to install "USB Print Service Client Setup", nothing change but a small icon in taskbar allow me to start and stop service, no dialog box said me how to install printer driver. I look in tp-link website and get "TP-LINK USB Printer Controller Setup", install it but it can not detect my printer. What should I do now because I cannot uninstall "USB Print Service Client Setup"?
View 4 Replies
View Related
Apr 10, 2013
Region : UnitedKingdom
Model : TL-WR842ND
Hardware Version :
Firmware Version :
I've just set up an old netbook as a secure ftp server on my network. As part of the process I locked the server host IP by making the lease permanent in the DHCP/Address Reservation page of the routers web GUI.However I later noticed the MAC binding page which seems to achieve the same thing (lock an IP address to a specific adapter). I was wondering what the practical differences between the two techniques are? i.e is it better to use binding than reservation?
I have the gut feeling that binding is more robust as I'm not sure what happens to a reservation if the specified host device is removed and then the router rebooted, is the address released back to the pool of available addresses? Binding feels like that address will never be made available to another device even if that device is no longer present, or is that completely wrong?Also does the binding survive a router reboot?
View 2 Replies
View Related
Apr 1, 2013
Region : Others
Model : TL-WR842ND
Hardware Version : V1
Firmware Version :
ISP :
I am planning to buy TL-WR842ND as a print server with my printer HP Laserjet pro P1102 [URL]
the compatibility list shows HP Laserjet 1100 and HP Laserjet 1100A as compatible models but does not make mention of P1102
Has anyone tried using the HP Laserjet P1102 with TL-WR842ND?
View 5 Replies
View Related
Mar 19, 2013
Region : Sweden
Model : TL-WR842ND
Hardware Version : V1
Philips support says it has to do with the router, firewall or something. Not much good from them. But I dont know anything about firewalls or anything, all I know is that my wireless internet works fine and that the TV is linked with the router but doesn't access internet. Streaming from pc to tv works fine though
View 1 Replies
View Related
Dec 15, 2012
Region : Canada
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
ISP :
I can access the USB storage via FTP, but I wanted to access files using a Windows Explorer format. Also, anyone access the Media share ? Manual tells you how to setup the USB functions but not how to access from a PC.
View 1 Replies
View Related
Mar 18, 2013
Region : Poland
Model : TL-WR940N
Hardware Version : V2
Firmware Version :
ISP :
few days ago i changer my work etc . so i tried to connect to worknetwork wireless but it was connected for 10 minutes and then this message just appear "Wireless network connection doesn't have a valid IP configuration" there is also public network the same ,, connected for few minutes then when i connect again always the said limited access but with my home work is working perfectly but with work or public network always get this msg after few days searching in google nothing useful ps all computers in company are working perfectly with this wireless connection but my laptop no i have this message in router setting WAN port is unplugged,, check photo here [URL] router model TL-WR940N im useing win7 64 hp pavilion dv7 anti virus > deleted firewall state > off IP helper > disabled when i was connecting to public network this is result of Xirrus WI-FI inspector [URL]
View 1 Replies
View Related
Mar 7, 2013
Region : Australia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
I am trying to get a windows 7 laptop to connect to a TD-W8970.
View 1 Replies
View Related
Dec 5, 2012
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Region : Canada
I have a T L-WR1043ND v1.9 with the latest factory firmware that I recently purchased. Ran fine for a couple of weeks. Now my WAN connection seems to be dropping. I get an IP and DNS from the ISP but I cannot ping anything (google etc...) past the router. I have to hit the detect button or release and renew the IP in order to gain access. Then after a few hours or a day the issue reoccurs.
View 1 Replies
View Related
Jan 19, 2011
I have a wireless router (D-Link DIR-625) connected to the modem for our high speed DSL. I have two Brother MFC printers, one is a laser (MFC-9420CN) connected w/ a Cat-5 directly to the router, the other is an ink-jet MFC-6490CN and I would like to use it wireless....but I could connect it to the router if I need to.I have wireless connection to the internet, from my HP 32-bit PC (running Vista-Ultimate), but can not see either of the printers on the network, and cannot print to either. I manually configured both to have an IP within the range of my network, but they still do not work.The problem (I think) could be with the IPCONFIG. (I had no problem last year, but we recently had a few power outages, and now the PC doesn't seem to 'see' any of the printers.) I checked the IPCONFIG. it states 'media disconnected', but I can ping the one wireless printer??? I can not ping the laptop on the network or the laser printer (I confirmed it's ipconfig before pinging).
I know the network card can't be bad, or I couldn't get to the router to access the internet. I also went into the cmd prompt as the administrator and did the /release/renew/all but that didn't work either.
View 4 Replies
View Related
Apr 24, 2013
Region : Malaysia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.13 Build 120605 Rel.38634n
The connection is slow when I connect my notebook to the TP-Link TL-WR1043ND wireless router. If I connect my notebook directly to to the ISP modem, the connection speed back to normal.
View 1 Replies
View Related
Jan 14, 2013
Region : UnitedStates
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : TDS
Currently I am using 2 WA5210Gs and a WR941ND to send my wireless connection from one home to another. The original home utilizes a TDS DSL modem/router combo. Everything works great, but then generally withing 24 hours I will randomly drop my internet connection in the second home, but the network is still up and running strong. The modem is not the problem, because I am able to grab a faint signal from the WA5210G AP connected to the modem and access the internet, and the client WA5210G AP is running at full signal. If I power down the router and restart it, the problem is fixed, but happens again within 24 hours. Originally I changed the IP on the WR941 thinking it was an IP conflict with the modem/router, but the problem occurred again. I also tried switching to unicast DHCP, but the problem still persisted. I looked for a firmware update, but couldn't find a newer version..
View 5 Replies
View Related
Jan 19, 2013
Region : Austria
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP : TPG
I've got a problem with the wireless dropping out randomly. It may take a week before it stops or a couple of hours. I originally thought my microwave oven was swamping the signal when we used it so I relocated the router much further away but this hasn't changed anything. I can still log in to the router from a computer on the wired ports and reboot the router. It also thinks the wireless is working but everything looses connection to it. We have 3 laptops and 4 phones that use the wireless and they all cannot connect when it goes down. This is only a new device - less than 6 months?
View 5 Replies
View Related
Feb 9, 2013
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel. 54965n
ISP : Toya Lodz
This is already my second model of the router, which got under warranty. The first model had a problem because it brokes off Internet connections. This second model also breaks the connection. I'm going to give it to complain. Before I do it I would like to ask if there are any ways to improve the router without the need to dispose of the device.
View 14 Replies
View Related
Mar 1, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : AT&T
Every 5 to 7 days my router loses connection with WAN (ISP modem) but connection over LAN is fine. It seems that 1043ND tries to connect to DSL modem from AT&T by username and password (that does not exists) instead of doing Dynamic IP. I understand that AT&T modem is of type of PPPoE but there is not a password or user id and connection must be dynamic. Page 192.168.0.1/logininfo of modem complains that I was trying to login with incorrect user id password. Every time I have to
1- connect the modem directly to my computer so the modem resets.
2- I have to reset 1043ND to factory default, reboot, and connect cables back how they were, Then go to WAN page do a release and renew to get connected to WAN again.
View 2 Replies
View Related
Mar 2, 2013
Region : Latvia
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : A/S Balticom
recently i bought wireless router TL-WR841N and there hasn't been a day or should i say few hours without restarting/turning on-off.I have cable(no modems,etc)Longest time it has ran without restarting was around 20hours.The problem is it RANDOMLY looses connection like this , but it's not the only problem , mostly when i leave computer and go to sleep or other business i leave router turner ON (no else have access to it and no one touches it), when i come back it just does not connect to internet, it shows that everything is fine , but i have no access to internet.This happens to all connected computers.I have dynamic ip I have russian version of windows xp sp3 , but i think everything is pretty understandable here. connection timed out/request timed out
Code:
Microsoft Windows XP [Версия 5.1.2600]
(С) Корпорация Майкрософт, 1985-2001.
C:Documents and SettingsГеоргий>ping -t [URL]
[code].....
FYI the problem is not in my computers(i tried setting up wireless networks from 2 different pc's) and i'm pretty sure it's not ISP's fault too(everything works fine through cable) , because this never happens with other wireless networks, etc.
View 3 Replies
View Related
Feb 7, 2013
Region : Germany
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 121127
is it possible to use the Print Server on the TL-WR1043ND without installing the "Printer Controller Utility"? I have a HP LaserJet 1022 (in compatiblity list) connected which is recognized by the TL-WR1043ND. I want to connect the printer manually to my Windows PC using standard tcp/ip port, but I can't get it working. I tried RAW with Port 9100 and LPR with lp1. What are the right settings??
View 1 Replies
View Related
Nov 18, 2012
I've recently bought a TL-WR1043ND & i'm trying to connect my Sky+ box to the Internet. When I connect the box directly to my broadband router all works OK. When I connect via an Ethernet connection on my TP-Link router - it get's an IP address from the router but it will not connect to the internet.
View 4 Replies
View Related
Apr 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo
I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.
View 1 Replies
View Related
Dec 9, 2012
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : V1_120405
ISP : UPC
After buying and installing i get no wlan/wifi connection.I do have internet by ethernet, the laptops and ipad sees the wlan/wifi but get no connection? Resetting re-installing manualy or with the wizard doesn't work.
View 2 Replies
View Related
May 14, 2013
Region : UnitedStates
Model : TL-WR841N
Hardware Version : V8
ISP : ATT
I get this new router TL-WR841N from amazon.com, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of 192.168.0.1 from ATT.Is my router deficit ?
View 2 Replies
View Related
Apr 23, 2013
Region : UnitedStates
Model : TL-WR940N
Hardware Version : V1
Firmware Version : TL-WR940N_v1_120201
ISP :
Just bought a TL-WR940N and it was always loosing connection and freezing / locking up. I upgraded to the latest FW from the link below URL but it still freezes and loses connection to devices after 8-12 hours, keeps hanging up and pages sometime don't load.
View 14 Replies
View Related
Nov 29, 2012
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.13.18
I recently bought a wireless N router (TL-WR841ND). I could connect my laptop to internet using the router but the problem is whenever I try to connect my phone to the wireless network, it goes on and off. It'll be on for a few minutes and then it is off and so on. By the way, the phone says you're still connected to the router but actually there is no real internet connection. But anyway, my laptop is connected to internet anyways!
I am living in a dormitory. And the website of the ISP is url... which provides dynamic IP. I have already tried different LAN IP adresses.I have already tried MAC Clone for WAN but nothing changes.I'm in a dormitory, there is also other routers here, could it because of conflicts with the other routers? [code]
View 4 Replies
View Related
Nov 29, 2012
Region : Germany
Model : TL-WR841ND
Hardware Version : V3
Firmware Version : 3.13.18
ISP : [url]...
I recently bought a wireless N router (TL-WR841ND). I could connect my laptop to internet using the router but the problem is whenever I try to connect my phone to the wireless network, it goes on and off. It'll be on for a few minutes and then it is off and so on. By the way, the phone says you're still connected to the router but actually there is no real internet connection. But anyway, my laptop is connected to internet anyways! I have already tried MAC Clone for WAN but nothing changes.[code]....
View 1 Replies
View Related
Apr 26, 2013
Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
I have been using this router for around 8 to 9 months now. Everything was working fine till one week back. Now I am facing problem with my office emails. I cannot get my office emails while on WiFi network. Outlook is not able to connect to my office server and I don't receive my emails. Rest everything works fine. Initially i used to get all the emails while using this WiFi router. When I connect my internet cable directly to my laptop, i am able to receive all the emails in my office outlook inbox.
I am also using my Samsung Galaxy S3 on this WiFi network. And my office outlook is configured in it. I am facing the same problem with my phone as well, it started recently, around one week back, as already informed above.However, when i switch on my mobile internet, all the new emails start coming to my inbox, which means that there is some problem with WiFi network.
What I am supposed to do which will enable me to receive all the office emails while on this routers WiFi network. Its giving me a hard time.
View 2 Replies
View Related
Mar 27, 2013
Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet
I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.
Configuration:
Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled
[code].....
View 1 Replies
View Related
Jan 16, 2013
Region : Russia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
can You create firmware for Hardrive 4 TB connection to router TL-WR1043ND via USB.
View 2 Replies
View Related
Feb 20, 2013
Region : Singapore
Model : TL-WR941ND
Hardware Version : V3
I would like to connect a device (dataloger that sends data to a remote server via internet) which only has LAN port to a wireless network on the location. I managed to do this once with WA901ND configured in Client mode (WA901ND acts like a wireless card for this data loger).Does WR941ND support this feature (which feature should I use?) or should I buy WA901ND again?
View 7 Replies
View Related
