I'm installing CiscoWorks LMS 4.0 on a server running Windows 2008 R2 Standard Ed, 64 bit. I'm using the patch to run the setup program. Now I'm upgrading to 4.0.1 without using the patch.
View 1 RepliesI recently built a new computer and everything seemed to be fine but won't let me go onto the internet...I'm using an ethernet cable from the computer to the modem/router (a Netgear DGNB2100). The little tray icon next to the clock says I have "Internet access" but Internet Explorer won't load any web pages (it stays on "Website found. Waiting for reply..." or "Waiting for..." etc) and when I search for updates from Windows Updates it would just keep searching give me some error saying there are connection problems.I've tried everything I can find on the internet, like:-using the windows troubleshoot/diagnostics (which comes up with nothing)-made sure it is obtaining IP address and DNS server address automatically-made sure Internet Explorer is not using a proxy-reset the Internet Explorer setting-disable windows firewall-disable and re-enable the connection-power cycle the modem/restart the computer-reset winsock and TCP/IP-uninstall/reinstall drivers (drivers are up to date as well)none of them seem to change anything and maybe other things which I forgot
View 5 Replies View RelatedI am installing LMS 4.2 on Windows 2008 R2 standard edition 64 bit. During installation its showing the following error.And I am not able to proceed the installation.
View 1 Replies View RelatedAs always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.
View 3 Replies View RelatedI'm trying to install LMS 4.0 on a 2008 R2, I got a message saying that this is not supported. Going through Cisco documentation I read the following:
Caution If you want to upgrade the operating system from Windows 2003 or Windows 2008 to Windows 2008 R2, you must first complete upgrading the operating system, and then install the LMS 4.0.x Windows 2008 R2 patch.
I'm a bit confused because i'm not upgrading the operating system, this is a fresh install.
I tried to run this in compatibility mode, selected 2008, and running it as an Admin, this time I'm getting a Locale error stating that this is only supported in US English or Japanese. I've changed the system locale to US English, still getting the same error.
I planned to install a LMS 4.0.1 on a VMWare server with Windows 2008 R2 64bits.
Is it supported with the "Windows 2008 R2" patch or do I need to order LMS 4.1 version ?
I am having trouble installing drivers for my ethernet controller. When I look in device manager, there is a yellow question mark next to Ethernet Controller (along with some other devices). I have identified that I have a Broadcom NetXtreme Gigabit Ethernet Controller (don't know the term for exactly what I am looking to find drivers for, is it just the "ethernet chip"? or "ethernet controller?"). It is a BCM5754 (VEN_14E4 DEV_167A). I am running Windows XP home sp3, which I updated to from sp1 via USB. How do I install drivers to get onto the internet?
View 8 Replies View RelatedI just did a fresh install of xp on a work computer(virus, nasty stuff), and now it will not connect to our office network. I've had to do this before, and we had an outside guy come in. He took two seconds in the cmd prompt and fixed it. I've reinstalled all the drivers and I did a network diagnostic. The only spot it's showing a fail is at the dnssearchorder
View 14 Replies View RelatedThis printer is connected to our schools network...in the lab I'm in, we have different subnet and my tech computer and the lab pcs gets dhcp from router connected to same new network switch as printer. I can ping the printer and pull up menu in browser but cannot print.
View 1 Replies View RelatedI recently installed a fresh Win7 Ultimate on my PC. I have done this many times, but nothing like this has happened.I have a problem connecting to the internet from my laptop. This is a screenshot of my Device ManagerThe diagnostic tools and built-in problem solving tools do nothing, as usual.
View 1 Replies View RelatedI have a compaq presario v2000 that i just installed windows 7 hope premium on (did a full hdd wipe, and reinstall windows)Windows 7 wireless connection manager can see all available wifi connections, but will not connect to any of them.Ive tried this on WPA2 networks, unsecured networks at several places (my office, wendy's, mcdonald's, my home, etc) i dont think it's the internal wifi card, as I could connect to those networks ok before the wipe/reload.I'm thinking it's a driver issue, but it's using the WHCL driver dated 2009 that is included in Windows 7, and I've not been able to find a more up-to-date one.device manager shows Broadcom 802.11b/g WLAN, but not exact model number.Compaq support site has drivers for XP & Vista only, and the Vista driver page doesn't include wifi card drivers.
View 2 Replies View RelatedI'm installing CiscoWorks LMS 4.0, and upgrade, on a domain member server running Windows 2008 R2 SE 64 bit.
View 1 Replies View RelatedDoes WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies View Relatedgetting a cert off of a 2008 R2 CA and imported correct in to ACS 4.2? I've had and have seen other have the problem with creating a web server certificate from R2 (1024 bit) and putting it in ACS 4.2 only to have HTTPS/SSL no longer work correctly. I haven't even tested the intended purpose of the cert (EAP-TLS) yet, so who knows if that works. I've also seen through searching where some one was able to take a 2003 CA web server template and put it into R2 and it work, but I know longer have 2003 available?
View 1 Replies View RelatedWe want to configure a Cisco WAP 321 to NPS on windows 2008.
On NPS system event viewer :
An Access-Request message was recived from RADIUS client XXXXXX with a Message-Authenticatior attribute that is not valid.
We have installed other RADIUS client on Windows 2003 Server and we have the same error.
On the Web interface of Cisco WAP only can configure the IP and password of the Radius server.
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedI have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedI'm wanting to make use of an old PC here that has Windows Server 2008 on it. i basically just want to use it as a backup machine. i have 1 PC, 1 Mac and an iPod Touch that'll be accessing it. what do i need to do to set it up? is there a guide anywhere? how is it different to setting up a NAS using FreeNAS?
View 3 Replies View RelatedMy computer has today 3x2 TB WD Green disks and thay are really slowing my system down so now I need to move them to somekind of NAS.I was first lookin at the "Synology Disk Station DS411j" but then I found that I got some old hardware laying around (AMD 3200+ CPU, 1 GB ram,XFX GeForce 7600GT, Seasonic SS-300FT in a Thermaltake Xaser II chassi). So now I got some questions :
1. I was looking into running FreeNas on my NAS but if the NAS is crashing then it will be alot of work to get the data back? Is it right that its not possible to just mount a drive from the FreeNas in to my Windows7 computer and read the data?
2. If I install Windows 2008(not r2 that demands 64bits CPU) and then uses dynamic volums to get one big volume, what will happen if this Windows2008 craches? will it be able to place one of the disks in my windows7 computer and reda the data?
3. What happens if one disk i a dynamicvolume craches? will all data be lost?
4. Is there any sleepmode in Windows2008? If would be nice if the computer shutsdown at night and startsup when it is about to be used.
5. Will a finished product like the "Synology Disk Station DS411j" demand less power? Will I earn anything to buy the DS411j instead of my old hardware if we look on the economics?
Whether ACS Se and Remote Agent 4.2.1.15.4 supports Windows 2008 R2.
View 6 Replies View RelatedWhile LMS 4.0 is supported on Windows 2003, it appears that LMS 4.1 is not, per release notes. Is that a hard and fast rule? Will 4.1 install and run on Windows 2003, although not supported? I have 4.0.1 running on Windows 2003 and would like to upgrade to 4.1 but cannot upgrade to Windows 2008 at this time.
View 1 Replies View RelatedDo you know if the NAC Manager supports SSO and LDAP authentication with Windows 2008 R2 Active Directory?
View 3 Replies View RelatedI have installed the Cisco ACS 4.2 in a server running Windows 2003 Server, and this server is member server of the domain. The ACS is working whit a Wireless Platform 4400, and authenticating to the Wireless Users using PEAP and Digital Certificate. But now, the windows platform will be upgraded to Windows 2008. My doubt are the following:
1. The ACS running in a windows 2003 server, will authentificate users in the new windows 2008 domain?
2. At the beginning, the ACS and the Windows domain was 2003. Now whit the change of the version of windows domain, What happens whit the configuration of the acs server as member server? I need reconfigure the member server configuration in the ACS Server?
configure PEAP for wireless with Windows 2008. The doc we have only mentions Windows 2003. When we follw that document we get a faulure when we try to bind the certificate to we have generated to ACS 5.0 .
View 1 Replies View RelatedI have working config for 2003 server:
aaa-server DC1 protocol ldap
aaa-server DC1 (inside) host 172.25.29.9
ldap-base-dn DC=KIEV,DC=CC
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn CN=ASA_LDAP,OU=aides,OU=IT,DC=KIEV,DC=CC
server-type auto-detect
ldap-attribute-map LDAPVPNMAP
But when i created another aaa-server DC2 with the same config (different ip and name only), which is running under 2008 Server, i've got at debug:
I have just finished installing LMS 4.2 on a new VM (Windows 2008 R2 Standard Edition SP1). I have already reloaded the server, all LMS services have correctly started. However, the process CS_sm_server.exe still using 100% CPU.Windows 2008 R2 Standard Edition SP1
View 6 Replies View RelatedI planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View Relatedokay so I tried to "REBUILD" my Sony Vaipo laptop (product name vpceh13fx) by reinstalling windows 7. the installation was successful but now it says I do not have any network hard drive available. I go into drive manager all of my drivers for example ethernet controller, network controller, excetera all have yellow (!). also instead of having my wireless icon at the bottom I now have a computer with an ethernet cable over it with a big red X.
View 1 Replies View Relatedit all xbox was connecting fine before i upgraded to windows 7?
View 9 Replies View RelatedI need to connect a OS2 pc with Windows Server 2008. However, I have tried the Netbeau (which can work in connect with Windows Server 2000), I cannot install the Netbeau to Windows Server 2008.
View 2 Replies View RelatedI am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies View Related