I just did a fresh install of xp on a work computer(virus, nasty stuff), and now it will not connect to our office network. I've had to do this before, and we had an outside guy come in. He took two seconds in the cmd prompt and fixed it. I've reinstalled all the drivers and I did a network diagnostic. The only spot it's showing a fail is at the dnssearchorder
View 14 Replies
I am having trouble installing drivers for my ethernet controller. When I look in device manager, there is a yellow question mark next to Ethernet Controller (along with some other devices). I have identified that I have a Broadcom NetXtreme Gigabit Ethernet Controller (don't know the term for exactly what I am looking to find drivers for, is it just the "ethernet chip"? or "ethernet controller?"). It is a BCM5754 (VEN_14E4 DEV_167A). I am running Windows XP home sp3, which I updated to from sp1 via USB. How do I install drivers to get onto the internet?
View 8 Replies View RelatedI recently installed a fresh Win7 Ultimate on my PC. I have done this many times, but nothing like this has happened.I have a problem connecting to the internet from my laptop. This is a screenshot of my Device ManagerThe diagnostic tools and built-in problem solving tools do nothing, as usual.
View 1 Replies View RelatedThis printer is connected to our schools network...in the lab I'm in, we have different subnet and my tech computer and the lab pcs gets dhcp from router connected to same new network switch as printer. I can ping the printer and pull up menu in browser but cannot print.
View 1 Replies View RelatedI have a compaq presario v2000 that i just installed windows 7 hope premium on (did a full hdd wipe, and reinstall windows)Windows 7 wireless connection manager can see all available wifi connections, but will not connect to any of them.Ive tried this on WPA2 networks, unsecured networks at several places (my office, wendy's, mcdonald's, my home, etc) i dont think it's the internal wifi card, as I could connect to those networks ok before the wipe/reload.I'm thinking it's a driver issue, but it's using the WHCL driver dated 2009 that is included in Windows 7, and I've not been able to find a more up-to-date one.device manager shows Broadcom 802.11b/g WLAN, but not exact model number.Compaq support site has drivers for XP & Vista only, and the Vista driver page doesn't include wifi card drivers.
View 2 Replies View RelatedI just recently got a new SSD, and I fresh installed windows 7 on it. I booted up, noticed that my internet connection would go from the red x to the swirly blue to say it was connecting, but back to the red x. I installed drivers from my MB CD just to get them on there, and I installed the LAN drivers that came with it. No luck.I go to Device Manager and see that it has my reltek LAN ethernet driver in there, NIC(NDIS 6.2) #3 So, then I checked the cable, I assumed this wasn't the issue, but just double checked. It worked in this laptop I'm using now. Then, I tried to window trouble shoot it. IT says a network cable is not properly plugged int(false, i tested the cable)It then says, Local Area Connection 2 doesn't' have a valid IP configuration.I went into CMD and typed /ipconfig release and renew I would get No operation can be performed on local area connection 2 while its has its media disconnected and An error occurred while renewing interfaces local area connection 2 : The operation was cancel by the used.
View 5 Replies View Relatedi was using windows 7 ultimate 64 before but i dont think thats relevant to the problem,after installation i found the correct drivers for my broadcom netlink gigabit ethernet controller and everything seemed to go fine but no connections are detected, it says 'unidentified network, no network access when i hover over the taskbar icon,when attempting to let windows resolve the problem i get the error,'local area connection doesen't have a valid ip configuration, all other computers on the network can connect no problem,im using a comtrend powerline 9020 wall plug with an ethernet cable to connect,and one last thing ive already looked for 'bonjour' in my services list and it does not exist on my system
View 12 Replies View RelatedIcon missing from network connections after fresh install
View 1 Replies View RelatedComputer got bad virus (the FBI one on the news) so after every attempt to eradicate it failed, I did a fresh install of Windows 7 onto the computer. However for some reason it won't even acknowledge that it has a Network Adapter. When I go to Driver Devices, there is no Network Adapter to even click on to see what the adapter is so I know what kind of driver to install.
So being an optimist I installed several drivers and nothing has worked. Its set on cable connection and I can't get it to acknowledge its wi-fi. I haven't tried plugging it straight into the modem yet. That's my next step.
I recently built a new computer and everything seemed to be fine but won't let me go onto the internet...I'm using an ethernet cable from the computer to the modem/router (a Netgear DGNB2100). The little tray icon next to the clock says I have "Internet access" but Internet Explorer won't load any web pages (it stays on "Website found. Waiting for reply..." or "Waiting for..." etc) and when I search for updates from Windows Updates it would just keep searching give me some error saying there are connection problems.I've tried everything I can find on the internet, like:-using the windows troubleshoot/diagnostics (which comes up with nothing)-made sure it is obtaining IP address and DNS server address automatically-made sure Internet Explorer is not using a proxy-reset the Internet Explorer setting-disable windows firewall-disable and re-enable the connection-power cycle the modem/restart the computer-reset winsock and TCP/IP-uninstall/reinstall drivers (drivers are up to date as well)none of them seem to change anything and maybe other things which I forgot
View 5 Replies View RelatedI've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage
View 3 Replies View RelatedI have just rebuilt our lms 4 server onto a newly built serve 2k8r2, from our old 2003 box.
The software is installed, and setup, however I cannot get it to add any devices to the inventory. Every device it trys to talk to is classed as unreachable.
I can telnet into each switches from the server, however the LMS software for some reason cant speak.
I can connect to my LAN at home and now am away for the winter and my wife's laptop connects automatically and mine will not detect a network with the same exact hookup
View 1 Replies View Related I have a Dell XPS 8300 desktop. The desktop recently got a virus which caused me to completely reformat the computer. I thought the PC came with a drivers CD but either it did not or I cannot find one. Now that I installed a fresh copy of Windows 7 it will not connect to the internet. I have tried downloading all network drivers, bios drivers and making sure BIOS is enabled but still I am unable to connect to the internet.
What can I do to fix this problem or is there any place that I can purchase the actual drivers CD for my PC so that this does not happen again? I have gone to the drivers and downloads page, put my tag number in and literally downloaded every single driver listed and still it is giving me the "no connection detected" error.
I'm installing CiscoWorks LMS 4.0 on a server running Windows 2008 R2 Standard Ed, 64 bit. I'm using the patch to run the setup program. Now I'm upgrading to 4.0.1 without using the patch.
View 1 Replies View Relatedcan't connect to the net with win98,,clean install...sys was runnin xp and working fine...formatted the drive and did install..all fine except connecting, comcast kids r do young to navigate it, says they don't support win98..but someone must be surfing with 98.
View 4 Replies View RelatedWe've had an old netbeui network set up for a while now but recently switched over to TCP/IP so my computer (running Windows 7 x64) could connect. The other computers on the network are running Windows 2000 and XP.All the older computers are working, but I still can't get mine to connect. It shows up as "Unidentified Network: Public Network"I really don't know where to go from here. I don't know if it should just pop up automatically or if I am supposed to configure it somehow.
View 5 Replies View RelatedI build a local DNS for namming my local network on windows server 2008 , but due to setup local DNS ,when I want to connect to internet from my pc , I can't do it . because my DNS set with a local IP such as 192.168.1.10. What can I do that have an Internal DNS and can use internet with that too.
View 1 Replies View RelatedI just installed windows 7 on a new machine I built myself. I ran the driver cds for the motherboard and GPU.
I have 2 wireless cards I have tried neither will pick up any wireless signals.
One is a Linksys wireless-G pci adapter Model wmp54g the other is a broadcom netlink gigabit adapter also wireless.
I have tried the newest drivers by downloading them but still no luck.
I am currently tethered to my phone.
My computer is running on Windows 7. It has had no prior internet connection problems. It is wired to my DV-2020 router. My internet suddenly disappeared, as in, it doesn't work anymore. I'm not sure as to when it disappeared due to my personal absence, but from what I heard it was either during 'starting a game' or 'installing firefox add-ons updates'. Internet does work on other computers sharing the same internet (wired and wireless). On the computer that does not have access to internet it gives a "local area connection - No Network Access" and "local area connection - unidentified network." So far I've tried:
A system restore.
Restarting the router (at home as well as the provider)
Changing wiring.
Disabling / Enabling.
Disabling virusscanner.
I'm using a Netgear WGT624 Router for my firm's intranet. At home I'm using a router called NSW-R2 by Gembird..
What I want to do is connecting my PC at home (Windows XP) to my firm's intranet so I can print on my LAN Printer or edit files on my NAS.
I've heard about VPN tunnels, but I don't want to keep my firm PC on 24 hours a day. So is it somehow possible, to build a VPN or something similar by only using the Netgear WGT624 Router?
Edit/More Information: I've steup a DDNS. My Router supports Port-Forwarding. I'm currently using Remote Desktop. Both PC run Windows XP Professional.
I am using hp pressario C7000 with window 7 32 bits. Can not access the internet. The reports 'local area network doesn't have a valid ip configuration'.
View 1 Replies View RelatedI recently got ATT u-verse and the POS 2wire modem/router won't let my local computers connect. I can FTP into my PS3, but can't run a media server. Can't share files between computers & can't connect to my Directv receiver with Directv2PC Everything worked before the u-verse. tried changing firewall settings, but no luck. tried turning off the firewalls on the computers, no luck. all devices have internet connectivity and are connected to the same RG through either a wired or wireless connection. .tried hooking another routers WAN port to a LAN port on the u-verse modem, with and withouit a different subnet, with and without DHCP......
View 1 Replies View RelatedI am using a Lenovo ThinkPad X200 and want to setup a wired local area network.How could I achieve this?
Situation:I just want to connect to the internet and I have a cable connection at home.So, I just want to plug the cable line to my notebook (x200) so that I can access the internet via the cable.
But I don't know how to setup a local area connection in notebook. Since it automatically appear in my desktop, but not in my notebook.
I recently inherited an old D630 laptop. I have just formatted the drive, and installed Windows XP (SP1, then upgraded to SP3) onto it. I have not been able to connect to my wireless network.I have downloaded and installed the drivers and installed in the recommended order. Issue is that I cannot get a dynamic IP address issued to me. It says I am on the network, but the only packets are outgoing. I have been trying to sort this for the last 2 days, and the laptop is close to being chucked out of the window.my wireless card is intel pro wireless 3945abg?
View 2 Replies View RelatedI have a computer (client) and I have connected to gateway and internet but I'm not connected to other clients.
View 3 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
View 1 Replies View Relatedlost wifi access thru local (home) connection. can connect thru public network. my grandma during last visit accidentally changed the network to her laptop. Have tried to reset netgear wnr2000v1 with pin in back. turned off and waited and turned back on again--no success. have tried to set up new network--see the network listed but no internet access available. have modem/router from comcast. My laptop is Acer Aspire 5733 with Lan Broadcom and wireless lan atheros.
[code]....
I know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
I can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1
View 5 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
More info:
ip config /all
netstat -n
ping&tracert 192.168.1.1
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedI have a dedicated server "out there".They dont provide any OS media to install and use your licence key (obviously).I have a licence and my own DVD/ISO. I can use that, its not a problem.The issue is, I do have IP KVM/IPMI (I think that is what its called) and I can install the OS through that and mount the ISO. Problem is that it will take literally forever to install because my net connection is very poor (< 1MB upload)Is there a faster way to install Windows over the web in this situation? How can I make it "better" in this circumstance?now should I ever get the OS installed in this way, in future if I need to unfortunately wipe and start again, how can I make it a more quick process?
View 6 Replies View Related
