Can't Connect To Internet After Fresh Install (Windows XP)?
Nov 8, 2012
I am having trouble installing drivers for my ethernet controller. When I look in device manager, there is a yellow question mark next to Ethernet Controller (along with some other devices). I have identified that I have a Broadcom NetXtreme Gigabit Ethernet Controller (don't know the term for exactly what I am looking to find drivers for, is it just the "ethernet chip"? or "ethernet controller?"). It is a BCM5754 (VEN_14E4 DEV_167A). I am running Windows XP home sp3, which I updated to from sp1 via USB. How do I install drivers to get onto the internet?
View 8 Replies
ADVERTISEMENT
Jan 17, 2013
I recently installed a fresh Win7 Ultimate on my PC. I have done this many times, but nothing like this has happened.I have a problem connecting to the internet from my laptop. This is a screenshot of my Device ManagerThe diagnostic tools and built-in problem solving tools do nothing, as usual.
View 1 Replies
View Related
Jan 14, 2011
I just did a fresh install of xp on a work computer(virus, nasty stuff), and now it will not connect to our office network. I've had to do this before, and we had an outside guy come in. He took two seconds in the cmd prompt and fixed it. I've reinstalled all the drivers and I did a network diagnostic. The only spot it's showing a fail is at the dnssearchorder
View 14 Replies
View Related
Feb 29, 2012
I have a compaq presario v2000 that i just installed windows 7 hope premium on (did a full hdd wipe, and reinstall windows)Windows 7 wireless connection manager can see all available wifi connections, but will not connect to any of them.Ive tried this on WPA2 networks, unsecured networks at several places (my office, wendy's, mcdonald's, my home, etc) i dont think it's the internal wifi card, as I could connect to those networks ok before the wipe/reload.I'm thinking it's a driver issue, but it's using the WHCL driver dated 2009 that is included in Windows 7, and I've not been able to find a more up-to-date one.device manager shows Broadcom 802.11b/g WLAN, but not exact model number.Compaq support site has drivers for XP & Vista only, and the Vista driver page doesn't include wifi card drivers.
View 2 Replies
View Related
Mar 15, 2011
I just recently got a new SSD, and I fresh installed windows 7 on it. I booted up, noticed that my internet connection would go from the red x to the swirly blue to say it was connecting, but back to the red x. I installed drivers from my MB CD just to get them on there, and I installed the LAN drivers that came with it. No luck.I go to Device Manager and see that it has my reltek LAN ethernet driver in there, NIC(NDIS 6.2) #3 So, then I checked the cable, I assumed this wasn't the issue, but just double checked. It worked in this laptop I'm using now. Then, I tried to window trouble shoot it. IT says a network cable is not properly plugged int(false, i tested the cable)It then says, Local Area Connection 2 doesn't' have a valid IP configuration.I went into CMD and typed /ipconfig release and renew I would get No operation can be performed on local area connection 2 while its has its media disconnected and An error occurred while renewing interfaces local area connection 2 : The operation was cancel by the used.
View 5 Replies
View Related
Dec 25, 2012
This printer is connected to our schools network...in the lab I'm in, we have different subnet and my tech computer and the lab pcs gets dhcp from router connected to same new network switch as printer. I can ping the printer and pull up menu in browser but cannot print.
View 1 Replies
View Related
Jul 7, 2012
I recently built a new computer and everything seemed to be fine but won't let me go onto the internet...I'm using an ethernet cable from the computer to the modem/router (a Netgear DGNB2100). The little tray icon next to the clock says I have "Internet access" but Internet Explorer won't load any web pages (it stays on "Website found. Waiting for reply..." or "Waiting for..." etc) and when I search for updates from Windows Updates it would just keep searching give me some error saying there are connection problems.I've tried everything I can find on the internet, like:-using the windows troubleshoot/diagnostics (which comes up with nothing)-made sure it is obtaining IP address and DNS server address automatically-made sure Internet Explorer is not using a proxy-reset the Internet Explorer setting-disable windows firewall-disable and re-enable the connection-power cycle the modem/restart the computer-reset winsock and TCP/IP-uninstall/reinstall drivers (drivers are up to date as well)none of them seem to change anything and maybe other things which I forgot
View 5 Replies
View Related
Sep 3, 2012
i was using windows 7 ultimate 64 before but i dont think thats relevant to the problem,after installation i found the correct drivers for my broadcom netlink gigabit ethernet controller and everything seemed to go fine but no connections are detected, it says 'unidentified network, no network access when i hover over the taskbar icon,when attempting to let windows resolve the problem i get the error,'local area connection doesen't have a valid ip configuration, all other computers on the network can connect no problem,im using a comtrend powerline 9020 wall plug with an ethernet cable to connect,and one last thing ive already looked for 'bonjour' in my services list and it does not exist on my system
View 12 Replies
View Related
Oct 20, 2012
I've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage
View 3 Replies
View Related
Oct 22, 2012
I have just rebuilt our lms 4 server onto a newly built serve 2k8r2, from our old 2003 box.
The software is installed, and setup, however I cannot get it to add any devices to the inventory. Every device it trys to talk to is classed as unreachable.
I can telnet into each switches from the server, however the LMS software for some reason cant speak.
View 7 Replies
View Related
May 21, 2012
Icon missing from network connections after fresh install
View 1 Replies
View Related
Dec 8, 2012
Computer got bad virus (the FBI one on the news) so after every attempt to eradicate it failed, I did a fresh install of Windows 7 onto the computer. However for some reason it won't even acknowledge that it has a Network Adapter. When I go to Driver Devices, there is no Network Adapter to even click on to see what the adapter is so I know what kind of driver to install.
So being an optimist I installed several drivers and nothing has worked. Its set on cable connection and I can't get it to acknowledge its wi-fi. I haven't tried plugging it straight into the modem yet. That's my next step.
View 3 Replies
View Related
Sep 23, 2012
I have a Dell XPS 8300 desktop. The desktop recently got a virus which caused me to completely reformat the computer. I thought the PC came with a drivers CD but either it did not or I cannot find one. Now that I installed a fresh copy of Windows 7 it will not connect to the internet. I have tried downloading all network drivers, bios drivers and making sure BIOS is enabled but still I am unable to connect to the internet.
What can I do to fix this problem or is there any place that I can purchase the actual drivers CD for my PC so that this does not happen again? I have gone to the drivers and downloads page, put my tag number in and literally downloaded every single driver listed and still it is giving me the "no connection detected" error.
View 4 Replies
View Related
Sep 18, 2011
I'm installing CiscoWorks LMS 4.0 on a server running Windows 2008 R2 Standard Ed, 64 bit. I'm using the patch to run the setup program. Now I'm upgrading to 4.0.1 without using the patch.
View 1 Replies
View Related
Jul 9, 2011
can't connect to the net with win98,,clean install...sys was runnin xp and working fine...formatted the drive and did install..all fine except connecting, comcast kids r do young to navigate it, says they don't support win98..but someone must be surfing with 98.
View 4 Replies
View Related
Jul 18, 2011
I just reinstalled XP on my Dell inspiron 1100. Everything works good expect I can't connect wireless to the internet. I use my Ethernet cable and everything works great. The wireless setting say's I'm connected with excellent strength, also I have an IP address. I went to disk management and check for conflicts and noticed the PCI modem was yellow. I was told to disable it because I don't use a modem so it should not be a problem.
View 5 Replies
View Related
Nov 9, 2012
I HAVE INSTALLED A NEW NETGEAR ROUTER BUT THOUGH MY LAPTOP SHOWS I AM CONNECTED TO THE ROUTER I CANNOT CONNECT TO INTERNET EXPLORER., WHY? MY IPAD WORKED FINE BUT NOT THE LAPTOP.
View 3 Replies
View Related
Mar 19, 2011
getting my computer connected to the internet.I have a fresh install of XP Media Center Edition with SP2. I don't really have anything else installed as I wanted to make sure my internet connection was working to get updates. My computer is a Dell XPS720 desktop I have a DSL connection with [URL] and a Dlink Wireless Router DIR655.I have two portable computers that are on the local network with wireless connections and they are working o.k.On my desktop at the command prompt; I cannot "ping" anything and "ipconfig /all" returns nothing at all.
View 3 Replies
View Related
Jan 3, 2012
I have a dedicated server "out there".They dont provide any OS media to install and use your licence key (obviously).I have a licence and my own DVD/ISO. I can use that, its not a problem.The issue is, I do have IP KVM/IPMI (I think that is what its called) and I can install the OS through that and mount the ISO. Problem is that it will take literally forever to install because my net connection is very poor (< 1MB upload)Is there a faster way to install Windows over the web in this situation? How can I make it "better" in this circumstance?now should I ever get the OS installed in this way, in future if I need to unfortunately wipe and start again, how can I make it a more quick process?
View 6 Replies
View Related
Feb 13, 2011
I am using Win 7.But my cd drive is not working.So can i install iis 7 from any other source??
View 2 Replies
View Related
Feb 20, 2012
How to update windows 2003 from a CD.
View 2 Replies
View Related
Jan 17, 2011
install Windows Installer 3.1 to complete installation. Microsoft .NET Framework 3.5 requires that Windows Installer 3.1 be installed to the installation.
View 1 Replies
View Related
May 16, 2011
windows not install on sunw1100z
View 1 Replies
View Related
Sep 1, 2011
Long story short, I have a Asus CG5270 desktop with a cdrom that DOES NOT work and a hard drive that is totally wiped clean of any operating system. I also have a router and a perfectly working laptop with Windows 7 64bit home premium on it. I do not have a crossover cable or external hard drive. I have the recovery disk for the desktop which is Vista 64bit home premium SP1.Can I or can I not use the laptop to reinstall Vista on my desktop?I've found this question asked countless times in countless forums but also countless answers that do not answer the question for a person that is not a computer engineer.
View 2 Replies
View Related
Nov 7, 2012
i would like to install wifi to my stand alone PC having XP?
View 1 Replies
View Related
Feb 9, 2011
My windows xp wireless drivers was functioning normally in my dell610.but accidentally i uninstalled it, now i am trying to install it but it ends up with an icon at the bottom which shows that it is installing but nothing is going on.i have tried this several time but i failed.
View 1 Replies
View Related
Sep 7, 2012
I am trying to install AC3.1 on windows7 64-bit. But i get the error installation ended prematurely without any reasons for failure. I posted the errors here. I tried installing AC3.0 on windows xp and i get same problem. NAM is not getting installed . I just want to use the AC client to connect to wireless network.
View 2 Replies
View Related
Dec 25, 2012
i am experiencing some sort of issue with my Ethernet Controller. About an hour ago i had run a diagnostic report, (using my Norton 360 security program) while i scrolled down the report i came across an orange attention bubble that read "Inoperable Hardware Devices" then a chart lists hardware devices that aren't working, it looked like this:
Data Type Device Problem/ Description
-Device Type -Ethernet Controller
- Device Status -Device Drivers are not installed
(Code 28).
i tried to update the device but it doesn't work, it says that "windows was unable to install Ethernet Controller, ...Windows could not find driver software for your device"
View 13 Replies
View Related
Nov 30, 2012
I installed w8 2 hours ago. I just hate they messed with evething but that is not the problem. Aftyer that I haven't beeb able to connect to Virgin broadband. I have to use a donle because my pc has not a wireless adapter. After installation it looks the dongle don't work because not lights come out of it (always b4 there was a light). I talk to someone on the phone but couldn't resolve the problem. They are just going to send a new one. At the moment I'm using 3 mobile wich I cancelled in favour of Virgin wich is not really so good. The is up to 60 Mb but it never goes over 10 MB.
View 1 Replies
View Related
Feb 19, 2011
how to install vpn on windows server 2003
View 1 Replies
View Related
Feb 4, 2011
how do you install a hauwei E1550 dongle to windows 7 & driver.
View 1 Replies
View Related
Jan 31, 2012
How to properly install default mail client windows 7
View 1 Replies
View Related
Nov 6, 2012
I have just finished installing LMS 4.2 on a new VM (Windows 2008 R2 Standard Edition SP1). I have already reloaded the server, all LMS services have correctly started. However, the process CS_sm_server.exe still using 100% CPU.Windows 2008 R2 Standard Edition SP1
View 6 Replies
View Related
