I have just rebuilt our lms 4 server onto a newly built serve 2k8r2, from our old 2003 box.
The software is installed, and setup, however I cannot get it to add any devices to the inventory. Every device it trys to talk to is classed as unreachable.
I can telnet into each switches from the server, however the LMS software for some reason cant speak.
I've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage
View 3 Replies View RelatedI just recently got a new SSD, and I fresh installed windows 7 on it. I booted up, noticed that my internet connection would go from the red x to the swirly blue to say it was connecting, but back to the red x. I installed drivers from my MB CD just to get them on there, and I installed the LAN drivers that came with it. No luck.I go to Device Manager and see that it has my reltek LAN ethernet driver in there, NIC(NDIS 6.2) #3 So, then I checked the cable, I assumed this wasn't the issue, but just double checked. It worked in this laptop I'm using now. Then, I tried to window trouble shoot it. IT says a network cable is not properly plugged int(false, i tested the cable)It then says, Local Area Connection 2 doesn't' have a valid IP configuration.I went into CMD and typed /ipconfig release and renew I would get No operation can be performed on local area connection 2 while its has its media disconnected and An error occurred while renewing interfaces local area connection 2 : The operation was cancel by the used.
View 5 Replies View Relatedi was using windows 7 ultimate 64 before but i dont think thats relevant to the problem,after installation i found the correct drivers for my broadcom netlink gigabit ethernet controller and everything seemed to go fine but no connections are detected, it says 'unidentified network, no network access when i hover over the taskbar icon,when attempting to let windows resolve the problem i get the error,'local area connection doesen't have a valid ip configuration, all other computers on the network can connect no problem,im using a comtrend powerline 9020 wall plug with an ethernet cable to connect,and one last thing ive already looked for 'bonjour' in my services list and it does not exist on my system
View 12 Replies View RelatedI am having trouble installing drivers for my ethernet controller. When I look in device manager, there is a yellow question mark next to Ethernet Controller (along with some other devices). I have identified that I have a Broadcom NetXtreme Gigabit Ethernet Controller (don't know the term for exactly what I am looking to find drivers for, is it just the "ethernet chip"? or "ethernet controller?"). It is a BCM5754 (VEN_14E4 DEV_167A). I am running Windows XP home sp3, which I updated to from sp1 via USB. How do I install drivers to get onto the internet?
View 8 Replies View RelatedI just did a fresh install of xp on a work computer(virus, nasty stuff), and now it will not connect to our office network. I've had to do this before, and we had an outside guy come in. He took two seconds in the cmd prompt and fixed it. I've reinstalled all the drivers and I did a network diagnostic. The only spot it's showing a fail is at the dnssearchorder
View 14 Replies View RelatedThis printer is connected to our schools network...in the lab I'm in, we have different subnet and my tech computer and the lab pcs gets dhcp from router connected to same new network switch as printer. I can ping the printer and pull up menu in browser but cannot print.
View 1 Replies View RelatedI recently installed a fresh Win7 Ultimate on my PC. I have done this many times, but nothing like this has happened.I have a problem connecting to the internet from my laptop. This is a screenshot of my Device ManagerThe diagnostic tools and built-in problem solving tools do nothing, as usual.
View 1 Replies View RelatedIcon missing from network connections after fresh install
View 1 Replies View RelatedI have a compaq presario v2000 that i just installed windows 7 hope premium on (did a full hdd wipe, and reinstall windows)Windows 7 wireless connection manager can see all available wifi connections, but will not connect to any of them.Ive tried this on WPA2 networks, unsecured networks at several places (my office, wendy's, mcdonald's, my home, etc) i dont think it's the internal wifi card, as I could connect to those networks ok before the wipe/reload.I'm thinking it's a driver issue, but it's using the WHCL driver dated 2009 that is included in Windows 7, and I've not been able to find a more up-to-date one.device manager shows Broadcom 802.11b/g WLAN, but not exact model number.Compaq support site has drivers for XP & Vista only, and the Vista driver page doesn't include wifi card drivers.
View 2 Replies View RelatedComputer got bad virus (the FBI one on the news) so after every attempt to eradicate it failed, I did a fresh install of Windows 7 onto the computer. However for some reason it won't even acknowledge that it has a Network Adapter. When I go to Driver Devices, there is no Network Adapter to even click on to see what the adapter is so I know what kind of driver to install.
So being an optimist I installed several drivers and nothing has worked. Its set on cable connection and I can't get it to acknowledge its wi-fi. I haven't tried plugging it straight into the modem yet. That's my next step.
I have a Dell XPS 8300 desktop. The desktop recently got a virus which caused me to completely reformat the computer. I thought the PC came with a drivers CD but either it did not or I cannot find one. Now that I installed a fresh copy of Windows 7 it will not connect to the internet. I have tried downloading all network drivers, bios drivers and making sure BIOS is enabled but still I am unable to connect to the internet.
What can I do to fix this problem or is there any place that I can purchase the actual drivers CD for my PC so that this does not happen again? I have gone to the drivers and downloads page, put my tag number in and literally downloaded every single driver listed and still it is giving me the "no connection detected" error.
I just wanted to know that can I install LMS 4.0 on a domain server.
View 1 Replies View RelatedSo as far as I can tell our server is not running any AV whatsoever, so I'm buying Kaspersky Small Business with the 10 PC package:Kaspersky Small Office Security | Virus Protection | Kaspersky Lab to install on it and our other PCs, and I was wondering if there's anything I need to know about installing AV on a server.
View 19 Replies View RelatedI am using WiFi using an AP, that AP gives me private IP's (192.168.0.X). I want to install a server (FTP, HTTP game, etc.) and want another person to access to the server's contents or services. That persons is outside of the local LAN, it's possible him to connect to my server using the public IP of the router?
View 4 Replies View RelatedIs it possible to install LMS 4.2 in multiserver mode but with possibility to select installed components/applications? I'm talking about Solaris version. I can't see such an option. It will install all the components on every server which I don't want to. We have LMS 3.2 working in such setup: one server with most major components, other running just DFM and third one with only HUM installed.
View 3 Replies View RelatedI'm curently studying for my CCNP Switch certfification, and I'm learning about RADIUS and AAA. I need to practice this topics, but unfortunately I can't find any way to do it. I have cisco ACS 4.2 but I'm unable to install it on my Server 2003 (it says mmc.exe needs to be closed, tried some things but no luck...). I'm unaware of any simulator for RADIUS or anything similar.
how to install ACS 4.2 on Server 2003 (how to solve the error I'm recieving), or point me towards some other product to practise RADIUS and AAA authentication
I've made hotspot ad hoc and then my client try to connect my hotspot but it must setting manually...how to my client connect to my hotspot automatically not manually??? and how to install and setup dhcp server i windows 7...
View 6 Replies View RelatedCan I install win2008r2 standard to a 500gb usb ultra portable harddrive and connect it to my net book and run it ? I am studying for the MCITP and want to use it for that purpose?
View 3 Replies View RelatedI have a server at work which an ESX server, it is running 5 VM's/OVA's and i have 2 physical workstations all hooked up to a switch. All the IP address's within the VM's/OVA are in the range 192.168.99.xx and so are the two individual workstations, they all need to be in that range to be able to communicate with each other.
View 2 Replies View RelatedI have a problem when I try to install ACS 4.2 on Server 2003 R2. When I start the ACS setup, i recive an error message saying:
View 6 Replies View Relatedhow to install software in a client system from server with out disturbing client system,
View 1 Replies View Relatedhow to install vpn on windows server 2003
View 1 Replies View RelatedI am trying to install Radius server for a cisco 2801 router. I am not able to configure it properly.
View 2 Replies View Relatedi installed fresh lms 4.2 on new machine and i amy trying to restore lms 4.1 backup via CMD.
View 1 Replies View RelatedHow can I install cache server for caching downloaded files ?
I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8)
Region : Vietnam
Model : TL-WR842ND
Hardware Version : V1
Firmware Version :
ISP :
Everything seems so good until I setting up the printer server. Resources CD contains the "USB Print Service Client Setup" but the User Guide said that I have to install "TP-LINK USB Printer Controller Setup". First, I tried to install "USB Print Service Client Setup", nothing change but a small icon in taskbar allow me to start and stop service, no dialog box said me how to install printer driver. I look in tp-link website and get "TP-LINK USB Printer Controller Setup", install it but it can not detect my printer. What should I do now because I cannot uninstall "USB Print Service Client Setup"?
it was possible to install RSA Authentication Manager server into the ACS 5.3 Virtual Machine ?
View 0 Replies View Relatedto backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 Replies View RelatedI'm installing CiscoWorks LMS 4.0 on a server running Windows 2008 R2 Standard Ed, 64 bit. I'm using the patch to run the setup program. Now I'm upgrading to 4.0.1 without using the patch.
View 1 Replies View RelatedI have three sytems on separate machines. The win7 on each one tells me there is a homegroup available. To get the password go to system 'X'. How do I delete this corrupted 'Homegroup' so that I may start afresh?
View 3 Replies View RelatedI recently built a new computer and everything seemed to be fine but won't let me go onto the internet...I'm using an ethernet cable from the computer to the modem/router (a Netgear DGNB2100). The little tray icon next to the clock says I have "Internet access" but Internet Explorer won't load any web pages (it stays on "Website found. Waiting for reply..." or "Waiting for..." etc) and when I search for updates from Windows Updates it would just keep searching give me some error saying there are connection problems.I've tried everything I can find on the internet, like:-using the windows troubleshoot/diagnostics (which comes up with nothing)-made sure it is obtaining IP address and DNS server address automatically-made sure Internet Explorer is not using a proxy-reset the Internet Explorer setting-disable windows firewall-disable and re-enable the connection-power cycle the modem/restart the computer-reset winsock and TCP/IP-uninstall/reinstall drivers (drivers are up to date as well)none of them seem to change anything and maybe other things which I forgot
View 5 Replies View RelatedI know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
