Cisco AAA/Identity/Nac :: Backup Admin Requested To Install VMWare Tools On ACS 5.3 Server
Nov 11, 2012to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 Repliesto backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 RepliesI have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance). The customer would like to know if LMS 4.2 is compatible with his backup agents :
* Symantec Veritas Netbackup (v7.1.0.2)
* Control-m (v6.4.01.300)
If not, what would be the best solution to backup the server ? Are the VMware tools supported now ?
I have just installed Cisco Prime LMS 4.1 from .ova file on a VMware architecture. My customer wants to know if the server is compatible with vmware tools.
View 7 Replies View RelatedYesterday I had a installation of LMS4.2.2 who was working fine. I followed the procedure to install VMware Tools on the virtual appliance on this thread url...
Now I have a problem with the processes of LMS, but maybe it is not linked. I forget to do a snapshot before installing VMware Tools so I need to find a solution. A whole bunch of services do not start know. I tried to uninstall the VMware tools, to regenerate SSL certificate, I rebooted the server several times. It is running under VMware 5.1. [code]
I have ACS 5.2 in standalone mode in operation and need not incorporating a second server for high availability ACS, the new ACS is a version 5.1
What should I do first, upgrade the ACS version 5.2 and created the high availability or high availability and get up after the upgrade?
it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies View RelatedAfter flashing the latest version of the firmware for the WRV200 (1.0.39) all of the pages on the web based admin tool are not working, and some are missing alltogether.I need to be able to re-flash the firmware to an earlier version (or attempt to re-flash this version) without using the web-based admin tool, as the page for doing the flash is one of the one's that is missing. Re-setting it doesn't work. I have tried searching here and through Google without any luck so far. The WRV200 works fine, but obviously is not locked down from a security standpoint, which is a large problem.
View 5 Replies View RelatedWhat is the procedure for web admin password recovery for nac server applicance 3355?
View 14 Replies View RelatedZAMZOM downloads OK, as nearly as I can tell, but I always get "error 1001" when trying to install it.
View 3 Replies View RelatedWhat vmware i have to use to install cucm 7. vmware workstation 7 or vmware server or exsi 4 or 5. Any correct link to download and vmware config settings.
View 2 Replies View RelatedI'm curently studying for my CCNP Switch certfification, and I'm learning about RADIUS and AAA. I need to practice this topics, but unfortunately I can't find any way to do it. I have cisco ACS 4.2 but I'm unable to install it on my Server 2003 (it says mmc.exe needs to be closed, tried some things but no luck...). I'm unaware of any simulator for RADIUS or anything similar.
how to install ACS 4.2 on Server 2003 (how to solve the error I'm recieving), or point me towards some other product to practise RADIUS and AAA authentication
I have a problem when I try to install ACS 4.2 on Server 2003 R2. When I start the ACS setup, i recive an error message saying:
View 6 Replies View RelatedI did an ISE 1.1.1 installation on a VMWare with ESX 5.0. After installation I am not able to login with my credentials(username admin, password XXXX) I can ping my ISE server after initial installation but I can not ping my ISE server after full installation.I did the installation several times and even did it on a VM with differrent VMversion.
View 3 Replies View RelatedI am trying to install Radius server for a cisco 2801 router. I am not able to configure it properly.
View 2 Replies View Relatedit was possible to install RSA Authentication Manager server into the ACS 5.3 Virtual Machine ?
View 0 Replies View RelatedWe need to move from ESX 3.5 to ESX 4.0 a virtual machine running Cisco Secure ACS per Windows version 4.2.
View 10 Replies View RelatedI am reading up on the ACS VMware appliance installation instructions and am a bit confused on the disk space requirements. It says 60Gb is required and then goes on to talk about 500GB for the secondary instance. Do I need more than 60gb? Is the secondary instance a separate machine or part of the same one?URL
View 5 Replies View Relatedis it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies View RelatedAre there any recommendations for configuring the VM for the ACS 5.x? What are the required minimum CPU-Cycles to dedicate and also the minimum RAM to dedicate?
View 1 Replies View RelatedWhat are the VMware requirements to run ACS4.1.4? Im trying to use a VM this as the migration server. According to the cisco docs, it states that: "ACS 4.1 has been tested on the VMWare ESX server with the following configuration:
•VMWare ESX Server 3.0.0
•16 GB of RAM
•AMD Opteron Dual Core processor
•300 GB hard drive
•Four virtual machines
•Windows 2003 Standard Edition
•3 GB of RAM for the guest operating system"
I understand it will work as it "has been tested" with those specs, but the doc does not state the minimum requirements for the virtual machine. I dont want to use/find 300GB of space if I only need 20GB(as an example) to make it work.
I'm with problems to migrate the ACS 5.1 hardware to ACS 5.1 vmware. In my infraestructure I have a appliance with ACS 5.1 and I need to migrate to vmware to do HA. I installed vmware as the Cisco ACS recommendations. I made a backup of the ACS hardware and copied the local disk vmware ACS.
When I start the restore process after a few minutes an error occurs:
UMA/admin# dir
Directory of disk:/
33293306 Jun 08 2011 16:51:38 bkp-production-110608-1433.tar.gpg
5862 Nov 07 2009 01:06:32 favicon.ico.1
16384 Jun 06 2011 17:54:34 lost+found/
[Code]....
I am trying to install ACS 5.0 on workstation, however once the install finsihes it reboots and I enter the Linux bash command line rather than the Cisco CLI.
Note - this is now fixed. I followed the steps here to install ACS 5.0 on VMware Workstation 7: url...
I have a client that is running ACS 5.3 as a VM in ESX 4.1. The client wants their VMWare admins to have the ability to shut down the ACS server during maintenance etc... I know I could create a CLI user with admin priviliges, however, assigning full admin priviliges is beyond the scope of what the user requires. They simply want a user account with the added privilige of performing a halt from the CLI. In the CLI Reference Guide for ACS.
So is it possible to create an account with user priviliges, then modify its permissions to allow for a halt?
We have 2 separate ACS 4.0 servers installed on windows 2003 server(2 separate location) Both these servers are Integrated with Cisco WLSE and Corporate AD.
Now, we are planning for Migrating to ACS 5.4 on VmWare ESXi 5.1. And need to Integrated with Cisco WLSE and Corporate AD.
Can we import the datas from 2 x ACS 4.0 server to this new Single ACS 5.4 vmware server?
I install virutal machine "VMWare Workstation7" on windows 7, i am mcitp student for practice i am using windows server 2008 on VMWare, but i can't assign static ip whenever i assign ip it show no access to the internet?
View 3 Replies View Relatedwhat is the best configuration between vmware ESX server with 10 Physical NIC card and cisco 6500 , This ESX Server host 12 vm with VLAN 100,150.200.
View 6 Replies View RelatedWe created the admin account during the setup and were able to log into the Web GUI, but we can't use this admin to access the CLI by using ssh, always said permission denied.
View 3 Replies View RelatedI want to set it up so that when you log into any of the ACS 5.2 servers you have to use your AD credentials to log in and define what access you have. Is this possible? If so, how can this be set up?
View 1 Replies View RelatedI am trying to configure ACS 5.1 to authenticate SSL VPNs on an ASA5500 and aslo to provide admin access to the ASA5500 both via radius.I want to authenticate the VPN against a SeureID appliance and the admin login against a different database (using internal for testing but will use LDAP in the end).I cant seem to get the ACS to distinguish between the two authentication types. If I create a rule that says match protocol radius I can point that at either database but if I try saying match radius and service type 5 it doesnt match the VPN and falls through to the default authentication service. I have also tried matching service type 6 for admin and that doesnt seem to work either.In the end what I want to acheive is to authenticate teh ASA5500 VPN against the SecureID appliance and then admin access to all devices on teh newtork (a mixture of Cisco, F5 and Juniper) to active directory via LDAP where if the user is a member of the "admin" group they get access.I was intending to use specific devices for the ASA5500s (there aretwo) and then creat a device group based on IP address range for everything else.
View 4 Replies View RelatedDo you know if it's possible to use ACS 5.x in such manner that the admin users (so not the end users, but the administrator users of ACS) are authenticated against and external database, like Active Directory?
View 2 Replies View Relatedwe have created some administration accounts which should only have the possibility to work on the user database. the useradmin role is to limited to create a user and set a fixed password only, but not able to enable the users authentication against a predefined external identity store. Other roles which makes this possible are far to powerful for a second level adminstrator.The adminstrator should have the possibility the create an user and set the password check against an external database. This is not possible with the predefine role "UserAdmin". Other roles do have to many rights for these users.
View 4 Replies View RelatedI've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
my admin user is still being assigned privilege level 1, as shown in AAA Protocol > TACACS+ Authentication Details report.The report seems to show that the user is getting the right shell profile (Selected Shell Profile: Net-Admin -- is the one I setup for this user's group with both Default Privilege and Maximum Privilege set to Static 15). But still not the right privilege (Privilege Level: 1).Also, I found this document via Google: [URL] The router configuration examples all show this "aaa authorization exec tacacs+|radius local" command, which my device does not have.So I am wondering if I am not reading the ACS report right, or the device actually was assigned the correct privilge but that does not work without the "aaa authorization exec" command in the configuration?
View 1 Replies View Related