Cisco Wireless :: WRV200 After Update Web Based Admin Tools Are Not Working
Aug 3, 2010
After flashing the latest version of the firmware for the WRV200 (1.0.39) all of the pages on the web based admin tool are not working, and some are missing alltogether.I need to be able to re-flash the firmware to an earlier version (or attempt to re-flash this version) without using the web-based admin tool, as the page for doing the flash is one of the one's that is missing. Re-setting it doesn't work. I have tried searching here and through Google without any luck so far. The WRV200 works fine, but obviously is not locked down from a security standpoint, which is a large problem.
View 5 Replies
ADVERTISEMENT
Apr 14, 2011
what web-based programs do i need to install a 887VA? I tried Cisco CP express version 2.1, not a supported device.
View 2 Replies
View Related
Nov 11, 2012
to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 Replies
View Related
Sep 1, 2012
Today i has tryed to update the firmware of my DIR-655 router, but in the screen under the administrative tools menu there is nothing to use.
how do I update the firmware and bring up all the necessary tools?Dir-655 works because they are connected to the internet and manages the wireless network.
View 2 Replies
View Related
May 9, 2011
XP Home edition, went to tools can't find working off line or working online to make sure off line is not checked so I can get on line DSL Verizon , Wireless router, wireless switch in on, on the cpu
View 1 Replies
View Related
May 2, 2013
Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
Region : India
Model : TL-WR702N
Hardware Version : V1
Firmware Version : 4.18.114 Build 130314 Rel.39604n
ISP : BSNL
702N runs as repeater mode to W8968. In 702N > Maintenance > Diagnostic the ping work for Internal network but fail for external IPs. Most devices connected to 702 can access Internet fine. I have also tried Bridge and Client mode.
Ping to W8968
Code:
Pinging 10.0.0.1 with 64 bytes of data:
Reply from 10.0.0.1: bytes=64 time=1 TTL=64 seq=1
Ping to Internet
Code:
Pinging 8.8.8.8 with 64 bytes of data:
Request timed out.
View 7 Replies
View Related
Jan 10, 2013
I'm trying to access the browser based utility (@ http://192.168.1.1) on my router and having no luck. I've tried from two different computers (each Win 7) and each browser. I've tried wired directly to the blue/LAN ports and through Wifi. I've confimred that the IP is correct (or is at least the default gateway for each machine). The Cisco Connect tool can't find the router either.the only thing that can find the router is the CiscoConnect Express app on my iPhone.Internet is working fineish (some problems with Wifi), I just want to play with some settings.
View 1 Replies
View Related
Oct 29, 2011
I have a WRT120N with Firmware 1.0.06..First peculiarity is that I can't access the web based admin screen from Firefox 7.0.1. The password prompt appears but won't proceed from there.Second, and main issue is that frequently (several times a day) I get a 'Limited Access' error on my wireless connection. On mouse roll over Windows 7 Pro gives the error message 'no internet access'. This problem appears to resolve itself after several minutes or straight away if the router is powercycled. During these 'Limited Access' moments I am unable to connect to the route web based admin page nor ping or tracert. [code]
View 8 Replies
View Related
Aug 5, 2010
I have a Linksys WRV200 WiFi router and read the documentation about it's VPN capabilities.Now I was wondering whether it could be possible to use it as my personal VPN while traveling abroad, instead of subscribing to 3rd-party personal VPN services?The idea here is:
1- my WRV200 router is at home, linked to my cable ISP, running the VPN service.
2- I'm abroad with my iPhone or iPad or my laptop and want to use public WiFi services but through a VPN (encryption).
Can I, say, from a public WiFi point in New York, connect with my iPad/laptop VPN service to my home router (in Geneva, Switzerland) and surf the web through it?Having everything encrypted from my iPad to my Home router, then everything redirected from Home to the appropriate address I connect to?My router doesn't have a fixed IP.That would be just like services like WifiGuardian, Personalvpn.com, witopia.net, but without subscribing or paying for the jservice?
View 2 Replies
View Related
Aug 19, 2012
My wife's computer was working fine. Two nights ago, a Windows update was automatically installed. Now, it will not connect to the internet. The map shows it connected to the network. We have several other devices on our network both wired and wireless and all of them are working fine.
I was able to use system restore yesterday to roll back the update. It still did not work. However, I tried connecting to a neighbor's wireless. It said something about refreshing the adapter and then it connected to our network and was working fine. Unfortunately, when she shut down last night, the windows update was reapplied. I turned off automatic updates and tried using system restore. It did not work this time. I removed every update that was applied in the last 48 hours but I still cannot get the computer to connect to the internet. However, it does connect to the internet when I bring it up in Safe Mode.
View 8 Replies
View Related
Mar 5, 2012
I'm having trouble seeing my WD 2TB HDD USB after the latest update, it's not showing the partitions anymore. Before the update it was working perfectly.
I'm using 1 partition for my Mac backup and the other partition for Win filesharing.
View 6 Replies
View Related
Nov 1, 2011
I have wirless router WRT54G ver.2. and I had firmware 2.0 So I downloaded new firmware From Here and did exactly as in instruction.
After update went successful I unplaged my router for 30 seconds but it's not working. I mean it's flashes and everything but can't access it and it is not broadcasting. and whats most interesting, reset buttom is not working
Want can I do? can I access it with some other way and reinstall firmware?
View 8 Replies
View Related
Jan 5, 2012
I have been having trouble with my router with wireless network intermittently cutting out every couple minutes (on all devices, like laptop, phone, and tablet.) So, in my wisdom, I went online and downloaded version 2 firmware and after power cycling the wireless doesn't work anymore. Questions:
I have my old Dell Desktop connected (hardwired) into the router, and it works when I take the wireless router out of the loop. How do I update the firmware on the router if I can't connect wirelessly or hardwire anymore? I want to go to version 1 to see if that will solve the original issue.
For the original issue of cutting out and reconnecting constantly, would version 1 work or something else? It isn't my cable modem, as internet has always worked fine connecting desktop or laptop directly.
View 2 Replies
View Related
Jul 18, 2011
I have had a WRV200 wireless router running at the family office now for a several years now and recently I was made aware of an issue with the router. Previously it's function was to provide internet access for the laptops at the office and two workstations. It was a simple set up really, 1 SSID was for the work computers that were allowed on the internet and another SSID for personal and quest wireless devices and I made sure they were in seperate VLANs. This issue came into light after our office moved and with some new upgrades in networking equipment it was deemed safe enough to have the other computers on my wireless router.
What is happening is that all the computers will have a momentary drop of connectivity and will re-establish it's connection to the wireless router. I check the event viewer and it's the same thing accross the board. I'll have several DHCP warings specifically event ID 1003 and finally DHCP error 1000 almost 30 minutes after the first warning. From the looks of it there is something going on with the DHCP addresses about to expire and the systems are having issues trying to get it renewed. The error will happen then the computer will restore the connection.
I have it isolated to the WRV200 because of two reasons. Every machine is having this issue, it's not a random occurance on one computer. The big clue was when I checked Event viewer on my Marketing Director's laptop. These same errors were present all the way back to May which was before the office move and the router was provide access for our laptops to get online. There was no other networking equipment connected to it except for the Clearwire modem.
Between May and now the router has been reconfigured from scratch. New SSIDs, redid the internal IP addressing network wide to incorporate the new computers and would be easier to manage them that way. All wired devices go through a 16 port switch and then through port 1 on the router. Port 1 is on VLAN 1 and the others on VLAN 5. The 3 SSIDS are each on their own seperate VLANs. All systems are on DHCP and the important computers and the printers I am using Static DHCP. In the mean time I set all the important machines to use an alternate IP addressing scheme so hopefully there is no drop in conenctivity. While the drop is minor it could cause issues in the program called SLS (especially during printing) so I can not have this issue to continue. Configuration wise everything is defualt, is there something to change in the configuration settings that I may have missed twice now or the router simply near the end of it's life cycle.
View 1 Replies
View Related
Dec 26, 2011
I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. If not, where can I get a copy of the old firmware that worked?
View 8 Replies
View Related
May 16, 2012
My organization has deployed 3 Cisco RV042 (v3) at our 3 sites. They have been working pretty well up until about a week ago. One of them continues to route traffic and perform port-forwarding, but the VPN has completely stopped working and I can no longer access the web administration interface. I get the standard login page, but any attempt to login (with correct or incorrect password) takes maybe 5 minutes with a spinning status icon, followed by a blank page leaving the browser at: url...
I have the router logs e-mailed to me, and I can see that the system boots up with Jan 1 2010 as the system date, but it eventually gets the correct date from NTP, so I'm doubting this is causing the problem.
These were working for months prior to this happening, and even a reboot of the affected RV042 does not allow me to log into it or setup the VPN tunnels. I have found similar threads on this forum: url...
View 2 Replies
View Related
Jun 17, 2012
I have a Linksys WRV200 and I wanted to know how can I restrict the internet speed for each computer on my network. Example: if my connection is 2 Mbps, One computer should have 1 Mpbs guaranteed, and the rest should split the rest.
View 1 Replies
View Related
Dec 6, 2011
I would like to access a Digital Video Recorder (192.168.3.200 port 12088) from the internet (Telenet/Belgium). I'm using a Cisco/Linksys WRV200 (192.168.3.254) to access the internet. I can access the WRV200 remotely (from Internet) and I've created following port forwards: Port 8016-8016 >>> 192.168.3.200 Port 12088-12088 >>> 192.168.3.200 Connecting to the DVR internally is working fine but accessing the DVR from the outside doesn't work for some reason.
View 1 Replies
View Related
Jun 23, 2011
I have ASA 5510 connected as shown in attached diagram.Ideally when ASA 1 is active and if I boot Switch-1, ASA-2 shood take over. But that is not happening.When I boot SW1 , ASA-2 shows "Failover LAN Interface: failover Ethernet0/0 (Failed - No Switchover)" and remains standby.Fail over works properly If ASA-1 boots.
View 7 Replies
View Related
Mar 3, 2011
I have RVS4000 v02 and created 3 VLANs - 192.168.70.0/24, 192.168.80.0/24, and 192.168.90.0/24 . I tired to created IP based access list to deny network 192.168.80.0/24 and 192.168.90.0/24 to have access to 192.168.70.0/24; and deny 192.168.90.0/24 to access 192.168.80.0/24.
MY ACCESS LIST from RVS4000
Deny All Protocol LAN 192.168.80.0/255.255.255.0 192.168.70.0/255.255.255.0 Any Time Every Day
Deny All Protocol LAN 192.168.90.0/255.255.255.0 192.168.70.0/255.255.255.0 Any Time Every Day
Deny All Protocol LAN 192.168.90.0/255.255.255.0 192.168.80.0/255.255.255.0 Any Time Every Day
Allow All Service LAN ANY ANY Any Time Every Day
Allow All Service WAN ANY ANY Any Time Every Day
* all access list is enabled.Both 192.168.80.0 and 192.168.90.0 network can still reach 192.168.70.0 network.
View 1 Replies
View Related
Apr 9, 2013
I am upgrading from 3750-E IOS 12.2 to 3750-X IOS 15.0
I have a dhcp pool set up to give out an ip address based on the Physical port of the switch. I also have it configured to give out "reserved only" addresses.
The configuration works when i plug a dhcp device in the 3750E. (IOS12.2) The configuration does not work when i use the same config on 3750X (IOS15)
When i debug dhcp, i see the DHCP discover message come in, but no offers or anykind of response from the 3750X.
If i remove the "reserved only" line the switch gives out IPs, but of ocurse not the ones i want. I did that to prove both the client and the switch can give out an IP.
So i have a feeling the subscriber-id client-id interface name mapping is not right, or not created.
Here is a snippet of config.
!
no ip dhcp use vrf connected
ip dhcp use subscriber-id client-id
ip dhcp subscriber-id interface-name
[Code]......
View 1 Replies
View Related
Aug 28, 2011
I just upgraded the firmware on the RV220W to 1.0.2.4 and it looks like the time is not updating. I tried a couple of different default time servers and also a custom time server (time4.nrc.ca).
View 2 Replies
View Related
May 16, 2012
I know about recomendation to update a system software! Here is my software version and rdp plug-in version: asa843-k8.bin, rdp-plugin.120424.I also tried to use previous version of rdp plug-ins, but connection through RDP still not work normally! 90 percent of the attempts to give a black screen.
View 1 Replies
View Related
Mar 21, 2005
I am using an 831 router and am trying to get DDNS to work. Here is the debug output:
RESS_ASSIGN: Interface Ethernet1 assigned DHCP address 67.162.204.242, mask 255.255.254.0, hostname testlab831.xxxxxx.com
00:53:06: DYNDNSUPD: Adding DNS mapping for testlab831.xxxxxxxx.com <=> 67.162.204.242
00:53:06: DYNDNSUPD: Sleeping for 3 seconds waiting for interface Ethernet1 configuration to settle
00:53:09: HTTPDNS: Update add called for testlab831.xxxxxxxx.com <=> 67.162.204.242
00:53:09: HTTPDNS: Update called for testlab831.xxxxxxxx.com <=> 67.162.204.242
[code]....
what the problem is with the "Call returned Connection time out for update testlab831.xxxxxx.com <=>" line.
View 3 Replies
View Related
Apr 13, 2013
ZAMZOM downloads OK, as nearly as I can tell, but I always get "error 1001" when trying to install it.
View 3 Replies
View Related
Jun 27, 2012
My laptop won't connect to the internet at all and status shows limited access to router. It was fine a few days ago until a Windows update. I did a system restore on it back to before the windows update and the internet was working just fine but then there was an automatic windows update again and the connection is gone again. When I try to troubleshoot it says the network adapter is not working properly. I'm currently using the main computer in the house. I can't access any network at all on my laptop and I'm nearly in tears. This has happened before about 7 months ago after a windows update. At that time I did a system restore and reinstalled the updates and it worked just fine. This time nothing. I have tried to check for updated drivers for the network adapters but windows says I'm running the recent ones.
View 8 Replies
View Related
Mar 2, 2012
We have 2 Cisco 4400 series WLC and a whole bunch of 1231G APs connected to it.Sometimes the wireless network get really, really slow.Does Cisco have any built in tools for troubleshooting bandwidth or sluggishness issues?And how does one go ahead and troubleshoot something like that?
View 5 Replies
View Related
Aug 6, 2012
I was upgrading the FW to 2.07 and after waiting 180 seconds, the router didn't came back, I reset the router and now got a Firmware Upgrade System Ver 1.0.0.2 Date 2009/12/07 Screen when typing 192.168.0.1. Tried to upload all the firmwares starting with 2.00NA and always got the Incorrect hardware ID image, please Check! message.. I can't get the *D-Link Router Recovery Mode* page or any other page. Looks like the firmware update wasn't successful and the router is not longing working, need to find out how to recover from a faulty firmware installation.? Also I open a case with DLink Tech Support, they told me to call Tech Support but I can't access the numbers from my country. I already answered their email like 4 times that I can't access the # and they keep telling me to call the #. Anyway what else I can do to recover the Router.
View 9 Replies
View Related
Jan 16, 2013
I updated my Dell Vostro 3550 Windows 7 Bios to version A11, and when the laptop rebooted, the wifi stopped working?
View 9 Replies
View Related
Jul 11, 2012
I have 3 WRV200 that I want to install in 3 cities.I want each router to have its own Internet connection from the local ISP.I then want each router to connect to the other 2 routers and create a 3 node WAN using VPN connections.
View 1 Replies
View Related
Jan 7, 2013
is it possible to make a VPN Connection with my Ipad and a WRV200 Vpn Router ?? The WRV200 is in my Company and i can start a VPN Connection with my Laptop. So this works. But is it also possible with my Ipad, so that i can get access to my NAS (Which is in my Company also)??
View 1 Replies
View Related
Nov 24, 2011
WRV200 does not transmit packets in Router mode. This issue has been describes already here:
[url]....
So is there a solution to forcing this router function properly according to manufacturer's declaration (router mode)?
View 1 Replies
View Related
Oct 10, 2011
Trying to get a service setup with a third party to access our system (ERP web service to access our ERP data, making data available to customers and vendors via internet). They require that I setup four external IP addresses to have access through the firewall. I haven't figured out how to do this. I'm using a Linksys WRV200 router.
View 1 Replies
View Related
