Cisco :: LMS 4.0 Installation On A 2008 R2?
Oct 17, 2011
I'm trying to install LMS 4.0 on a 2008 R2, I got a message saying that this is not supported. Going through Cisco documentation I read the following:
Caution If you want to upgrade the operating system from Windows 2003 or Windows 2008 to Windows 2008 R2, you must first complete upgrading the operating system, and then install the LMS 4.0.x Windows 2008 R2 patch.
I'm a bit confused because i'm not upgrading the operating system, this is a fresh install.
I tried to run this in compatibility mode, selected 2008, and running it as an Admin, this time I'm getting a Locale error stating that this is only supported in US English or Japanese. I've changed the system locale to US English, still getting the same error.
View 18 Replies
ADVERTISEMENT
Jan 28, 2013
I am installing LMS 4.2 on Windows 2008 R2 standard edition 64 bit. During installation its showing the following error.And I am not able to proceed the installation.
View 1 Replies
View Related
Feb 7, 2012
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
View 17 Replies
View Related
Jul 27, 2011
Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.
View 3 Replies
View Related
Sep 18, 2011
I'm installing CiscoWorks LMS 4.0 on a server running Windows 2008 R2 Standard Ed, 64 bit. I'm using the patch to run the setup program. Now I'm upgrading to 4.0.1 without using the patch.
View 1 Replies
View Related
Oct 24, 2011
I planned to install a LMS 4.0.1 on a VMWare server with Windows 2008 R2 64bits.
Is it supported with the "Windows 2008 R2" patch or do I need to order LMS 4.1 version ?
View 5 Replies
View Related
Dec 6, 2011
I have router cisco 2821 wit IOS version 12.4(25d) I also have Cisco AIM-VPN/SSL-2 Encryption Module for this router.I inserted this module in AIM slot 0 but can not see it. [code] What should I have to change to enable this module?
View 2 Replies
View Related
Apr 2, 2013
I just got two Prime NCS Servers for my system and they came with 1.2. My management wanted to run the lastest IOS which is 1.3. So as soon as I set the physical equipment up, I downloaded the latest 1.3 IOS for the site and burned it on a DL DVD and reimaged the appliance.
View 1 Replies
View Related
Apr 16, 2012
We've just purchased the a VM Version of MSE (L-MSE-C3-W25) installed on vSphere.Have followed the guide, gone to add this to WSE and it wont connect.Looking at the console it says to type /init.d/msed.start, I get -bash: /init.d/msed: No such file or directory Then type getserverinfo returns Health Monitor is not running.
View 2 Replies
View Related
Jul 2, 2012
How can I do a VoIP Install/Repair?
View 3 Replies
View Related
Oct 19, 2011
Which are the cable use during network setup .thr saterlite procedure in transmitting information.The speed of transmission in information.
View 2 Replies
View Related
Aug 20, 2012
I have a SBS 2008 box at a clients with 16 gig of ram in it. Right now the server is using 88-90% of it's ram. I have checked the device manager to see how much ram the services are using and everything except for a few services are using less then 200,000k each. The exchange store is using around 600,000k which is right in range and then a couple w3wp.exe services are using around 300,000k or less. Now here is where the issue lies 3 SQL engine processes are using a total of around 7 gig of ram. My client runs a custom software that uses sql express to host the database. And I am just wondering if it's normal for SQL to use this much ram in 2008 or should I be talking to the software company about the large consumption. It's basically using half of the available ram on the server. I did upgrade this machine from 8 gig ram about 9 months ago and it was fine for a while then all the sudden SQL just started eating more ram to point where we are today.
View 10 Replies
View Related
Sep 1, 2011
Any info concerning the installation of CW LMS 4.0.1 on Solaris 10!
The installation keeps on failing when it is checking for packages. Also the second time when we downloaded the software once more.
ERROR: AddProperty called with invalid package name: CSCOmd.
I have also attached the install log files.
The system is Solaris 10 with zones:
bash-3.00# more /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
121133-02, 125503-02, 126897-02, 127127-11, 127755-01, 138866-01 Incompatibles:
[Code] .....
View 5 Replies
View Related
Mar 14, 2012
I have one WLC AIR-WLC4402-50-K9 which is hitting some bug. So I done RMA for that devices and now i got the new WLC.Now i want to install that RMA WLC in network. So can any one tell me what is the process for installtion of WLC. I already have the old WLC in working now. Which file backup i need to take from old WLC.
View 3 Replies
View Related
Jan 21, 2013
is it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies
View Related
May 9, 2013
I am installing LMS 4.1 to windows 2008 R2 SP1.Server hardware meets requirements.A the end of the installation I am getting from the installation log file the following warnings/errors. [code]
View 5 Replies
View Related
Jun 20, 2012
I have installed lms 4.1 on a windows 2008 server however after installation, the webgui cant be launched
View 3 Replies
View Related
Oct 24, 2010
I've installed the ACS version 5.2 in a VMware platform and everything seemed fine but in the post installation task I need to access to the GUI. Based on the documentation I should access the "https://10.0.0.X/acsadmin" on my browser's url but after I hit enter nothing comes up, there's just a whiter web page. Is there any missing configuration that I need to do and that it is not on the configuration pages?
View 5 Replies
View Related
Jun 12, 2012
We are getting the below mentioned error while installling Cisco Prime LMS 4.2.1 evaluation version on WIndows 2008 Enterprise R2.We tried installing on a high end VMware server .Prerequisites are all taken care by us.We are getting a LMS installation abort log saying that Swap space is not configured properly even after increasing the Paging size to 32 GB.Our physicalmemory is 16 GB.Hard drive has 2 partitions,one is 35 GB and other is 200 GB.
View 3 Replies
View Related
Jan 19, 2012
Which certificates do I install on the ASA 5510 ???
I have a Trust External CA Root, Trust Server CA, Extended Validation Secure Server CA and the name of the domain all ending in CRT. Yet the instructions only refer to two certificates ?
View 2 Replies
View Related
May 22, 2011
My company just upgraded our VPN software to use Cisco AnyConnect 3.0.1047. We were previously using 2.5.0217. I successfully upgraded the VPN client on my iMac. I am trying to do the same on my MacBook Pro but the process is failing. Both Macs are using OSX 10.6.7. Both use Chrome but I have reproduced the error using Safari and Firefox on the failing system.
On the failing MacBook, the IP address my IT department gave me produced this error:After the 26 second timeout completed, I was brought to this screen:
I clicked the "Mac..." link above and a file called "cstub" was downloaded. I could not execute the file directly as its permissions started at 644. I changed its permissions through the terminal to 755. I tried executing the binary but it failed returning error code 250.I tried uninstalling AnyConnect 2.5.0217 to see if that improved things. No change.
View 3 Replies
View Related
Apr 20, 2013
We would like to install a pair of ACS 5.4 apliance as primary /backup in our two datacentres.I have some question regarding degin.
1- We have 800+ network device to monitor , can we install by range of address instead of instlling one by one in device host database ?
2- Do We have to install all 800 device first on Primary and then again on backup or Primary will replicate to backup server?
3- We do not have real IP address yet, so if we built with dummy address and make them pair and all the database sync, then when we change their IP address, will the distributed primary pair will have any issue with backup ACS server?
View 7 Replies
View Related
Jul 13, 2011
I have configured my WLC 4402 for Radius authentication using Cisco ACS server version 4.2 Patch 4. When using Local Database of ACS my Wireless Users are able to authenticate but users are not able to authenticate from External Database of Windows AD 2008 R1.
In ACS logs I am getting the this error- Authentication session timed out. Challenge not provided by client.
View 3 Replies
View Related
Feb 8, 2009
Does WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies
View Related
Apr 30, 2012
getting a cert off of a 2008 R2 CA and imported correct in to ACS 4.2? I've had and have seen other have the problem with creating a web server certificate from R2 (1024 bit) and putting it in ACS 4.2 only to have HTTPS/SSL no longer work correctly. I haven't even tested the intended purpose of the cert (EAP-TLS) yet, so who knows if that works. I've also seen through searching where some one was able to take a 2003 CA web server template and put it into R2 and it work, but I know longer have 2003 available?
View 1 Replies
View Related
Feb 3, 2013
We want to configure a Cisco WAP 321 to NPS on windows 2008.
On NPS system event viewer :
An Access-Request message was recived from RADIUS client XXXXXX with a Message-Authenticatior attribute that is not valid.
We have installed other RADIUS client on Windows 2003 Server and we have the same error.
On the Web interface of Cisco WAP only can configure the IP and password of the Radius server.
View 1 Replies
View Related
Mar 8, 2012
My ISP is Bright House. They installed a new modem a couple of weeks ago to fix the problem with the phone. Since then, however, only 1 of 2 PCs will go online. Everything's connected correctly, and it shows that there's a connection. Here's what I've tried so far, but to no avail:
Reset/replug everything.Manually set IP address and DNS settings.Using "ipconfig/renew" in command prompt to try and change the IP address.
I've talked to Bright House support about this, but they haven't been any hope. All they said was to contact the manufacturer of my router, but it looks like a discontinued model (some sort of Linksys). I bought a new D-Link EBR-2310 router, but I'm having problems with the installation of the firmware.
View 1 Replies
View Related
Apr 29, 2012
My hard drive crashed and had to reinstall my OS using manufacturers disk now everything works but the internet, the integrated ethernet card is not listed under network adapters in the device manager, its a clean install of windows xp media center edition 2005 sp2, the device manager shows no drivers missing.
View 5 Replies
View Related
Jul 18, 2012
Looking for some instruction on IP camera installation?
View 3 Replies
View Related
Sep 18, 2011
i lost my installation cd for my e1000
View 1 Replies
View Related
Aug 5, 2011
configure gsm modem
View 1 Replies
View Related
Jul 11, 2012
I am installing a security license on Cisco 2911 Router for the first time. It already has a temporary license installed on it which is expiring soon. Cisco has already mailed me the procedure for installation. I want to know if i need to uninstall the previous license before installing the new one.
View 2 Replies
View Related
Jul 27, 2011
After installing a S370, and upgrading AsyncOS, I have critical messages such as:
An application fault occurred: ('journal/base.py _check_file_size|371', "<class 'journal.exceptions.CorruptError'>", 'CorruptError: File size does not match (33328990208 38708391936)', '[coeuslog/coeuslogd.py run|909] [coeuslog/coeuslogd.py _run|872] [journal/base.py mount|437] [journal/base.py _mount|493] [journal/base.py _recovery|577] [journal/base.py _check_file_size|371]')
Product: Iron Port S370 Web Security Appliance
Model: S370
Version: 7.1.0-307
Serial Number: 842B2B49C468-CNLVX4J
Timestamps: 27 Jul 2011 12:16:03 +0200
View 2 Replies
View Related
