How To Do A VoIP Installation
Jul 2, 2012How can I do a VoIP Install/Repair?
View 3 Replies
ADVERTISEMENT
Cable Use During WAN Installation
Oct 19, 2011Which are the cable use during network setup .thr saterlite procedure in transmitting information.The speed of transmission in information.
View 2 Replies View RelatedDelay With VOIP Calls?
Jan 24, 2011I am encountering delays when making any calls using VOIP. I understand that there is always a delay using VOIP but not as much. I've done a bandwidth test on my network and everything seems to be Ok, we have 4 T1s with 55 Reps using it. There is nothing choking up the network.
View 3 Replies View RelatedSelecting A Router For VOIP?
Apr 6, 2012Trying to select a router that will work well networking a computer with a nettalk duo, on a limited bandwidth connection: .3/3Mbps up/down. From what little I've been able to find on this, QoS bandwidth control seems critical, yet the list of recommended routers from Nettalk seems to favor routers that don't have this feature. On the other hand, the list apparently hasn't been updated in a year and a half.
View 5 Replies View RelatedVOIP IP Phone Only Working Through ICS?
Feb 10, 2011Recently at my company we have started using Polycom i335 IP Phones from 8x8 inc, the thing is that while trying to use it directly through a switch it does not register with the server and I get a "url call is disabled" msg on the LCD of the Polycom. On that same switch I am using an Aastra 6755i IP phone, it is working absolutely fine, although it is using the same technology and ports.Now if I connect my laptop via wireless or if I connect a PC through wire and use ICS to share the internet and connect the Polycom to the shared Ethernet port, the Polycom works fine! On the same network Vonage works fine as well. but this Polycom only and only works via ICS?
View 1 Replies View RelatedConnect Two Laptops Via VOIP?
Mar 17, 2011How can I connect two laptops via VOIP?
View 1 Replies View RelatedVoIP Box Which Has From 3 To 10 Phone Ports?
Aug 5, 2011Any VoIP box which has from 3 to 10 phone ports?I'm sourcing the box for a business that wants to connect about 8 phones to the box, then have the calls terminated on our partitioned platform hosted by a third party.
View 3 Replies View RelatedD-Link DIR-615 :: Cannot Use A VoIP Application?
Dec 9, 2010I have a Voip application on my Windows Vista Home Premium. It is called Reliance iCall. I was not able to call from this application for a few months and so i thought there was something wrong with it. But just yesterday i thought of connecting my modem directly to the desktop and the call went through without any problem. It is only when i connect modem to computer through router that this application does not does not do anything.
What could be in this router that is blocking the calls from making a connection? There is also no setting to configure in this VoIP application. I dont know what to do. And also dont want to keep on switching modem's ethernet cable from router to computer and back.
Cisco VPN :: VOIP QoS Over L2L VPN On ASA5505
Jan 17, 2012I have 4 remote sites that are using a ASA as thir firewall / router. I'm setting up a full mesh VPN between all the sites. One of the sites have a UC500 and the other sites access that UC over the VPN tunnels. I would like to set up some basic QoS for the VOIP traffic
The site that has the UC will have multiple vpn tunnles coming in from the remote sites. How will I do QoS with voice traffic on that site?
Cisco VPN :: 5540 - VoIP Over VPN
May 21, 2013I have a Cisco ASA 5540 running 8.2(5). When I dial a phone on the other of the the VPN the first time I get a blank after it rings(i.e when the voice mail get activated if someone picks the phone up), however works the second and consequent times i dial.
A little background. Two sites A and B connected via IPsec Tunnel. No problems in communication except for the VoIP issue. A Phone in on site A(172.17.168.x) and other on site B(192.168.103.x). Site A and Site B is connected via an IPsec tunnel on the Cisco ASA. First call fails. Second call works. Result of a packet trace is also the same. The UDP packet get drops when tried for the first time but subsequent ones pass.
First time
ASA5520# packet-tracer input inside udp 172.17.168.95 10000 192.168.3.103 10000
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 outside
[code].......
Can't Go Online With 2 PCs After New Modem Installation
Mar 8, 2012My ISP is Bright House. They installed a new modem a couple of weeks ago to fix the problem with the phone. Since then, however, only 1 of 2 PCs will go online. Everything's connected correctly, and it shows that there's a connection. Here's what I've tried so far, but to no avail:
Reset/replug everything.Manually set IP address and DNS settings.Using "ipconfig/renew" in command prompt to try and change the IP address.
I've talked to Bright House support about this, but they haven't been any hope. All they said was to contact the manufacturer of my router, but it looks like a discontinued model (some sort of Linksys). I bought a new D-Link EBR-2310 router, but I'm having problems with the installation of the firmware.
Cabling / Cards :: No NIC After Os Installation?
Apr 29, 2012My hard drive crashed and had to reinstall my OS using manufacturers disk now everything works but the internet, the integrated ethernet card is not listed under network adapters in the device manager, its a clean install of windows xp media center edition 2005 sp2, the device manager shows no drivers missing.
View 5 Replies View RelatedInstruction On IP Camera Installation?
Jul 18, 2012Looking for some instruction on IP camera installation?
View 3 Replies View RelatedLost My Installation Cd For E1000
Sep 18, 2011i lost my installation cd for my e1000
View 1 Replies View RelatedSoftware For GSM Modem Installation?
Aug 5, 2011configure gsm modem
View 1 Replies View RelatedCisco :: LMS 4.0 Installation On A 2008 R2?
Oct 17, 2011I'm trying to install LMS 4.0 on a 2008 R2, I got a message saying that this is not supported. Going through Cisco documentation I read the following:
Caution If you want to upgrade the operating system from Windows 2003 or Windows 2008 to Windows 2008 R2, you must first complete upgrading the operating system, and then install the LMS 4.0.x Windows 2008 R2 patch.
I'm a bit confused because i'm not upgrading the operating system, this is a fresh install.
I tried to run this in compatibility mode, selected 2008, and running it as an Admin, this time I'm getting a Locale error stating that this is only supported in US English or Japanese. I've changed the system locale to US English, still getting the same error.
Cisco VPN :: AIM-VPN / SSL-2 Installation In 2821
Dec 6, 2011I have router cisco 2821 wit IOS version 12.4(25d) I also have Cisco AIM-VPN/SSL-2 Encryption Module for this router.I inserted this module in AIM slot 0 but can not see it. [code] What should I have to change to enable this module?
View 2 Replies View RelatedCisco :: NCS 1.3 Gives Error On Installation
Apr 2, 2013I just got two Prime NCS Servers for my system and they came with 1.2. My management wanted to run the lastest IOS which is 1.3. So as soon as I set the physical equipment up, I downloaded the latest 1.3 IOS for the site and burned it on a DL DVD and reimaged the appliance.
View 1 Replies View RelatedCisco Wireless :: MSE (L-MSE-C3-W25) - VM New Installation
Apr 16, 2012We've just purchased the a VM Version of MSE (L-MSE-C3-W25) installed on vSphere.Have followed the guide, gone to add this to WSE and it wont connect.Looking at the console it says to type /init.d/msed.start, I get -bash: /init.d/msed: No such file or directory Then type getserverinfo returns Health Monitor is not running.
View 2 Replies View RelatedCisco Packet Tracer VOIP
Sep 9, 2012having some issues. My basic VOIP network I can get to work no problem uner Vlan 1. But when I try tomake multiple basic networks to connect and put them in to diffrent Vlans such as Vlan 2, 3, 4 and conect them the phones now say configuering IP.
View 1 Replies View RelatedCisco :: Configuring 2960 For VoIP?
Mar 26, 2012We just purchased cisco 2960 for our VoIP needs and we are using polycom phones, and Phone and Computer will use same port. Since Polycom phones are capable working with CDP protocol and we are hoping to get another switch to expand VoIP network. I found easiest way of setting up each port is as following (from the cisco tutorial)
Switch#configure terminal
Switch(config)#mls qos
Switch(config)#interface fastethernet 0/1
Switch(config-if)#mls qos trust cos
Switch(config-if)#switchport voice vlan dot1p
Switch(config-if)#switchport voice vlan 10
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
My first question,when we are using switchport voice vlan dot1p ,I thought we instruct the switch port to use 802.1P priority tagging for voice traffic and to use the default native VLAN (VLAN 0) to carry all traffic.Do I still need to create a Vlan 20 for data and Vlan 10 for voice ?
Secondly,same tutorial adds these commands as well,Do you think for our set up, using those commands are feasible ?
Switch(config-if)#switchport priority extend trust
Switch(config-if)#priority-queue out
Switch(config-if)#spanning-tree portfast
Switch(config-if)#spanning-tree bpduguard enable
Switch(config-if)#exit
Thirdly,when we get another switch and do the same configuration for the second switch, can I use any port on Switch 1 as uplink without doing any configuration ?
Cisco :: VOIP QoS Config Not Matching?
Aug 15, 2011my config and all the show's ive run sofar tryign to figure this out, but the policy map isnt matching the traffic for some reason
View 9 Replies View RelatedPossible To Run VoIP Phone Through SB6121 Modem
Dec 22, 2012My cable provider has installed a separate RCA DHG536 modem for my VoIP phone service alongside my SB5120 modem, and charges me $7 a month modem rental. I am upgrading the SB5120 to a DOC 3.0 modem and wonder if I can abandon the DHG536 modem?
View 2 Replies View RelatedCable Modem That Supports VOIP?
Feb 5, 2012If one has internet and phone service through Cable, I know you can buy your own modems and routers, but is there a particular kind of modem you'd need to get to support VOIP for the phone?
A friend of mine has phone through Cable and her internet and phone suddenly stopped working, although her TV service is fine. We are thinking that maybe the cable company's modem is bad, so she wants to buy her own modem, but we're not sure if it needs to be a particular type of modem. I've looked around for her, but haven't found anything in modem specs stating they support VOIP. Does it matter? Or can you buy any cable modem?
We already looked at the cable providers website to see their supported modems, but they are all the same brand as the one she has that doesn't work. She already has a wireless router, which she will plug into the modem she buys, so we're only looking for answers regaring a modem.
FVS338 / FVS318 / VPN Between Offices For VoIP?
Jan 19, 2012I have an Avaya IP office setup on a 1.5 mb T1 PRI at location 1. My second location is going to run IP phones over 15mb/1mb DSL connection. All calls will generate from the IP office at location 1. I will have 6-8 IP phones at location 2.I assume i need a VPN setup between the two office for the IP phones to work. I've been looking for the best VPN solution and it appears for a budget the Netgear FVS318 or FVS338 is the way to go. If I go that route do I just need a FVS338 or FVS318 at both locations?
View 11 Replies View RelatedHow To Voip Calls In Proxy Network
Apr 5, 2012in our office private network we are using a proxy server for internet connection sharing, we are unable to make voip calls through this proxy server?
View 1 Replies View RelatedCisco :: Splitting Up VOIP Traffic?
Jun 26, 2012I have a little weird request at work. One of our offices would like to split the VOIP traffic. At that office we have a 10MB primary and 3MB backup circuit. Currently the phones are routing over the 10MB circuit. The General Manager would like to use the 3MB backup circuit for VOIP traffic. For the 3MB we have two T1 lines bundled together in a multilink. Configuration is bellow if needed
3MB Circuit
VOIP QoS And Editing Auto Attendants
Feb 19, 2013We have a few voip phones, with the voip server in the building. The hard phones have been trouble, with dropouts and occasional bad quality phone calls. The sip provider is absolutely hopeless. The modem router is a DG834Gv5 with fw V1.6.00.33. There is no option in the router interface to edit QoS settings. How can I improve our voip system? have an iphone connected to a handset or something, could that? We are using an iPECS-50A voip server and iPECS LIP-8012D phones.
My second question is in regards to auto attendants. I need to edit auto attendant settings. I assume this is done using the VOIP server. When the IP address is entered, I get a station program option and Admin & Maintenance. Where would I find auto attendant?
Making Voip Softphone To Work On Vpn?
Mar 14, 2011How do i make sure that my voip softphone is going through the vpn i have and the other party ( voip prvider is seeing the vpn ip insted of my real ip
View 2 Replies View RelatedVoIP / IP CCTV PoE Switch Recommendation?
Apr 6, 2012recommendation for a PoE-compliant (802.3af) 10/100 ethernet switch suited for the following use. A client wants a separate [from their data] network dedicated to their new IP CCTV/IP Intercomm system (Stentofon ISO5 Cleanroom Certified). Total of 15 devices, all of which support PoE, 11 of which require it. The intercomm system will be the primary method of communication with personnel inside the clean space, so it must have minimum downtime.
1) 16x RJ45 (Only 15 devices -- anything over 16 ports is waste, SFP/expansion/combo ports not required)
2) *All* ports 802.3af PoE compliant, approx 5W load.
3) 10/100 (Gigabit not necessary, there's only 2 cameras and voice traffic is compressed)
4) Prefer rackmount but not necessary
5) Prefer Cisco/Cisco SB simply because I trust 'em (have an IAD and switch going strong for years with no downtime )
D-Link DIR-601 :: Not Working On Quake 3 Or VOIP?
Jan 3, 2010I just bought the Dir-601 router and so far it is fast and stable. However, I haven't been able to get it to work on Quake 3 (no connection to the Master server) or VOIP using the Linkysys Pap2 voip adapter. I tried setting it up using the predefined port forwarding rules to no avails. I tried port forwarding certain ports and even using DMZ but also without success. For some reasons, the router is preventing my computer to connect to any online server.
View 4 Replies View RelatedD-Link DIR-825 :: Can't Get VOIP ATA To Work Properly
Aug 18, 2012I can't get my VOIP ATA (linksys SPA-2102) to work properly with the shiny new DIR-835. I updated the firmware to 1.02 and messed around with various settings but it just won't work. Well, I can get registered and everything looks ok but, when I receive a call, the person at the other end can't hear me. I can hear them fine, but they can't hear me. I don't have any problem when I call someone. Still, it is frustrating. The problem persist even though I put the ATA in the DMZ.
View 3 Replies View RelatedD-Link DIR-601 :: DPX2203C - Computability Between TWC And Voip
Aug 12, 2011I will have to set up my sister in laws wireless router to a Bright House(TWC) internet and Bright house voip.. What I would like to know if others set this combination without issues or is their a compatibility problem? Any router configuration things?
Her modem is a single internet modem and voip box combined(see subject).. Besides the cable input there are two jacks for telephone and one for Ethernet plus power..
I am only guessing but I presume that my router will have to come from the Ethernet to the WAN port or one of the LAN ports..Can some one clarify how this should be wired and if any changes I need to make in the Routers software? Presently I have it working from my house from my modem(without voip the feature) into the WAN port and it works fine with WPA2 encryption..
