Software For GSM Modem Installation?
Aug 5, 2011configure gsm modem
View 1 Replies
ADVERTISEMENT
Can't Go Online With 2 PCs After New Modem Installation
Mar 8, 2012My ISP is Bright House. They installed a new modem a couple of weeks ago to fix the problem with the phone. Since then, however, only 1 of 2 PCs will go online. Everything's connected correctly, and it shows that there's a connection. Here's what I've tried so far, but to no avail:
Reset/replug everything.Manually set IP address and DNS settings.Using "ipconfig/renew" in command prompt to try and change the IP address.
I've talked to Bright House support about this, but they haven't been any hope. All they said was to contact the manufacturer of my router, but it looks like a discontinued model (some sort of Linksys). I bought a new D-Link EBR-2310 router, but I'm having problems with the installation of the firmware.
Dell :: Inspiron 1545 - Driver Installation Failed / Could Not Find Modem Device
Oct 20, 2012I have an Inspiron 1545 and I reinstalled Vista 32-bit, but I having problems with the comms driver (Conexant D400, External USB 56k Modem Rev : a05) and having the following message appear when I install the driver?
where to show MODEM?
How To Do A VoIP Installation
Jul 2, 2012How can I do a VoIP Install/Repair?
View 3 Replies View RelatedCable Use During WAN Installation
Oct 19, 2011Which are the cable use during network setup .thr saterlite procedure in transmitting information.The speed of transmission in information.
View 2 Replies View RelatedCabling / Cards :: No NIC After Os Installation?
Apr 29, 2012My hard drive crashed and had to reinstall my OS using manufacturers disk now everything works but the internet, the integrated ethernet card is not listed under network adapters in the device manager, its a clean install of windows xp media center edition 2005 sp2, the device manager shows no drivers missing.
View 5 Replies View RelatedInstruction On IP Camera Installation?
Jul 18, 2012Looking for some instruction on IP camera installation?
View 3 Replies View RelatedLost My Installation Cd For E1000
Sep 18, 2011i lost my installation cd for my e1000
View 1 Replies View RelatedCisco :: LMS 4.0 Installation On A 2008 R2?
Oct 17, 2011I'm trying to install LMS 4.0 on a 2008 R2, I got a message saying that this is not supported. Going through Cisco documentation I read the following:
Caution If you want to upgrade the operating system from Windows 2003 or Windows 2008 to Windows 2008 R2, you must first complete upgrading the operating system, and then install the LMS 4.0.x Windows 2008 R2 patch.
I'm a bit confused because i'm not upgrading the operating system, this is a fresh install.
I tried to run this in compatibility mode, selected 2008, and running it as an Admin, this time I'm getting a Locale error stating that this is only supported in US English or Japanese. I've changed the system locale to US English, still getting the same error.
Cisco VPN :: AIM-VPN / SSL-2 Installation In 2821
Dec 6, 2011I have router cisco 2821 wit IOS version 12.4(25d) I also have Cisco AIM-VPN/SSL-2 Encryption Module for this router.I inserted this module in AIM slot 0 but can not see it. [code] What should I have to change to enable this module?
View 2 Replies View RelatedCisco :: NCS 1.3 Gives Error On Installation
Apr 2, 2013I just got two Prime NCS Servers for my system and they came with 1.2. My management wanted to run the lastest IOS which is 1.3. So as soon as I set the physical equipment up, I downloaded the latest 1.3 IOS for the site and burned it on a DL DVD and reimaged the appliance.
View 1 Replies View RelatedCisco Wireless :: MSE (L-MSE-C3-W25) - VM New Installation
Apr 16, 2012We've just purchased the a VM Version of MSE (L-MSE-C3-W25) installed on vSphere.Have followed the guide, gone to add this to WSE and it wont connect.Looking at the console it says to type /init.d/msed.start, I get -bash: /init.d/msed: No such file or directory Then type getserverinfo returns Health Monitor is not running.
View 2 Replies View RelatedVpceh13fx - No Internet After Windows 7 Re-installation?
May 14, 2012okay so I tried to "REBUILD" my Sony Vaipo laptop (product name vpceh13fx) by reinstalling windows 7. the installation was successful but now it says I do not have any network hard drive available. I go into drive manager all of my drivers for example ethernet controller, network controller, excetera all have yellow (!). also instead of having my wireless icon at the bottom I now have a computer with an ethernet cable over it with a big red X.
View 1 Replies View RelatedNetgear Installation CD - MDM Utility Will Not Initialize?
Dec 26, 2011I have a netgear router installation cd but everytime i click setup it say MDM_Utility will not initialize.
View 1 Replies View RelatedXbox Won't Connect After Windows 7 Installation
Nov 21, 2012it all xbox was connecting fine before i upgraded to windows 7?
View 9 Replies View RelatedD-link Dir-655 :: Lost Installation Cd - Cannot Use Wifi?
Aug 24, 2011Is there any place I can download it so I can use my wi-fi again withot buying the installation CD?
View 2 Replies View RelatedD-Link DIR-615 :: CD Broken - How To Get To Installation Wizard
Feb 23, 2011i have already installed this, but it stop working so i unplugged it, now cant find the CD
View 1 Replies View RelatedD-Link DIR-615 :: Installation And Setup Procedure
Oct 24, 2011I bought the dir-615 today and already have issues. I don't know much about networking and have an intermediate understanding of computers in general. When I run the CD Wizard the configuration says it has detected another router and asks if I want to replace it or add the new router with it. I do not and have never had a router previously. So, for whatever reason I can't use the wizard because of this. I followed the instruction perfectly and no dice. Installing it manually is a bit above my knowledge level.
View 1 Replies View RelatedCisco :: LMS 4.0 Installation Errors On Solaris 10
Sep 1, 2011Any info concerning the installation of CW LMS 4.0.1 on Solaris 10!
The installation keeps on failing when it is checking for packages. Also the second time when we downloaded the software once more.
ERROR: AddProperty called with invalid package name: CSCOmd.
I have also attached the install log files.
The system is Solaris 10 with zones:
bash-3.00# more /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
121133-02, 125503-02, 126897-02, 127127-11, 127755-01, 138866-01 Incompatibles:
[Code] .....
D-Link DCS-930L :: Is Installation Any Different Because There Are 2 Networks
Mar 10, 2012I have a DCS-930 running successfully on my home network. Now I want to set up a DCS-932 on a different network at my mother's house in another city, so I can monitor her house from a distance. Questions:
1. After installing, will I be able to see both cameras at mydlink.com if they are on different networks?
2. Is installation any different because there are 2 networks?
3. Can I use the existing install wizard on the laptop that I used with the 1st installation or should I use my mother's PC?
4. How do I get started since the first instruction is to insert and use the CD that came with the new camera?
Basically I want to know what the install procedure is if I am using a different network but the same laptop I used with the 1st one. The laptop has a wireless connection to both networks.
Cisco :: WLC4402-50-K9 Process For Installation Of WLC?
Mar 14, 2012I have one WLC AIR-WLC4402-50-K9 which is hitting some bug. So I done RMA for that devices and now i got the new WLC.Now i want to install that RMA WLC in network. So can any one tell me what is the process for installtion of WLC. I already have the old WLC in working now. Which file backup i need to take from old WLC.
View 3 Replies View RelatedCisco :: ACS 5.4 Installation On Vmware Workstation
Jan 21, 2013is it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies View RelatedCisco :: LMS 4.1 Installation Ends With Errors
May 9, 2013I am installing LMS 4.1 to windows 2008 R2 SP1.Server hardware meets requirements.A the end of the installation I am getting from the installation log file the following warnings/errors. [code]
View 5 Replies View RelatedCisco :: LMS 4.1 WebGUI Won't Launch After Installation
Jun 20, 2012I have installed lms 4.1 on a windows 2008 server however after installation, the webgui cant be launched
View 3 Replies View RelatedCisco AAA/Identity/Nac :: No GUI Interfaces Of ACS 5.2 After Installation?
Oct 24, 2010I've installed the ACS version 5.2 in a VMware platform and everything seemed fine but in the post installation task I need to access to the GUI. Based on the documentation I should access the "https://10.0.0.X/acsadmin" on my browser's url but after I hit enter nothing comes up, there's just a whiter web page. Is there any missing configuration that I need to do and that it is not on the configuration pages?
View 5 Replies View RelatedCisco :: Prime LMs 4.2.1 Installation Error
Jun 12, 2012We are getting the below mentioned error while installling Cisco Prime LMS 4.2.1 evaluation version on WIndows 2008 Enterprise R2.We tried installing on a high end VMware server .Prerequisites are all taken care by us.We are getting a LMS installation abort log saying that Swap space is not configured properly even after increasing the Paging size to 32 GB.Our physicalmemory is 16 GB.Hard drive has 2 partitions,one is 35 GB and other is 200 GB.
View 3 Replies View RelatedCisco VPN :: ASA 5510 - Certificates Installation?
Jan 19, 2012Which certificates do I install on the ASA 5510 ???
I have a Trust External CA Root, Trust Server CA, Extended Validation Secure Server CA and the name of the domain all ending in CRT. Yet the instructions only refer to two certificates ?
Cisco VPN :: AnyConnect 3.0 Installation Failure
May 22, 2011My company just upgraded our VPN software to use Cisco AnyConnect 3.0.1047. We were previously using 2.5.0217. I successfully upgraded the VPN client on my iMac. I am trying to do the same on my MacBook Pro but the process is failing. Both Macs are using OSX 10.6.7. Both use Chrome but I have reproduced the error using Safari and Firefox on the failing system.
On the failing MacBook, the IP address my IT department gave me produced this error:After the 26 second timeout completed, I was brought to this screen:
I clicked the "Mac..." link above and a file called "cstub" was downloaded. I could not execute the file directly as its permissions started at 644. I changed its permissions through the terminal to 755. I tried executing the binary but it failed returning error code 250.I tried uninstalling AnyConnect 2.5.0217 to see if that improved things. No change.
Cisco :: ACS 5.4 Distributed Pair Installation
Apr 20, 2013We would like to install a pair of ACS 5.4 apliance as primary /backup in our two datacentres.I have some question regarding degin.
1- We have 800+ network device to monitor , can we install by range of address instead of instlling one by one in device host database ?
2- Do We have to install all 800 device first on Primary and then again on backup or Primary will replicate to backup server?
3- We do not have real IP address yet, so if we built with dummy address and make them pair and all the database sync, then when we change their IP address, will the distributed primary pair will have any issue with backup ACS server?
Windows Server 2008 Core Installation
Jul 27, 2011Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.
View 3 Replies View RelatedLicense Installation On Cisco 2921 Router?
Jul 11, 2012I am installing a security license on Cisco 2911 Router for the first time. It already has a temporary license installed on it which is expiring soon. Cisco has already mailed me the procedure for installation. I want to know if i need to uninstall the previous license before installing the new one.
View 2 Replies View RelatedCabling / Cards :: Fiber Optic Installation?
Apr 26, 2012We're planning to install 24 strand singlemode fiber optic cable in three ocations. What is the best way to run the cables between the 3 locations. Location 1 is in the south, 2 is in the middle and 3 is in the north pretty much in a straight line.Should we run one fiber optic cable from location 1 to location 2 and another fiber optic cable from location 1 to location 3 or is there a better way? Maybe we can run from 1 to 2, 2 to 3 so that location 2 acts like a hub.Is there a way to just run one fiber optic cable from location 1 to 3 and along the way somehow splice that cable to go to location 2
View 1 Replies View RelatedNetwork Card Not Detected After Windows 7 Installation
Jun 2, 2012Recently I dual-booted my PC from Windows XP(On which the LAN card was working and i was able to access the internet) to Windows 7.Then i formated the drive on which WinXP was installed. Sometime later i noticed that the LAN card (Atheros A8151 PCI-E Ethernet Controller) was not working i went into the adapter settings in network control in the control panel and there was no adapter. i checked the device manager and there was no option called NETWORK ADAPTERS.
View 14 Replies View Related
