How To Voip Calls In Proxy Network

Apr 5, 2012

in our office private network we are using a proxy server for internet connection sharing, we are unable to make voip calls through this proxy server?

View 1 Replies


Delay With VOIP Calls?

Jan 24, 2011

I am encountering delays when making any calls using VOIP. I understand that there is always a delay using VOIP but not as much. I've done a bandwidth test on my network and everything seems to be Ok, we have 4 T1s with 55 Reps using it. There is nothing choking up the network.

View 3 Replies View Related

Linksys Wired Router :: RVS 4000 - Voip PBX Server Is Dropping Calls

Jul 8, 2008

I recently purchased a rvs 4000 wired linksys router for my business.  Everything works great with the exception of my VOIP PBX server.  I can receive a call and make a call one at a time.  If a second line rings in and is picked up the first call and the second go dead air.  I am sure that it is a security setting somewhere that I just can't seem to figure out.  I sure would like to get some direction on this.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: VOIP Dropped Calls Over TP-Link WDR4300

Feb 14, 2013

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast

I just upgraded my DLink DIR655 to WDR4300. My VOIP service has worked for the last 5 years. But with WDR4300, I'm frequently experiencing dropped calls. The call will be cut off every 20 seconds or so. This is really a deal-killer.

View 7 Replies View Related

Cisco :: Transferring Calls Through The Network To A Legacy PBX?

May 1, 2011

As stated in the attached picture, my company has a remote office which its PBX was connected to the main PBX via a pair of leased lines and a pair of E1/HDSL converters. (The distance is about 2 kilometers, so the E1 was converted to HDSL and then back to E1 at the remote site)

Now, IP network is developed between two sites.We want to transfer the calls via a pair of 2811 Routers, both equipped with VWIC2-1MFT-T1/E1, as the second part of the picture. I tried to find an straightforward document, but I was unsuccessful.What configurations should be made at both ends to transfer the calls to/from the remote site ?

View 19 Replies View Related

Cisco :: Setting Transparent Proxy To A Proxy Running On A Client?

May 28, 2012

I would like to connect devices to my network so that their traffic passes through a proxy running on my computer. I figured the best way to do this is by setting the proxy on my router to the one I am running, but then I would need to have another connection to the computer running the proxy or else there would be an infinite loop ?? something like that. so:

Internet -> router (1) -> my proxy on comp A -> router (2) -> computer B

View 1 Replies View Related

Security / Firewalls :: Using Non-proxy Software Through Proxy?

Mar 31, 2012

I access the internet from my company�s LAN, which has a restrictive firewall, so I cannot request the admin to open any ports manually for me. Hence I use a software called your-freedom. This proxy software supports both http as well as socks 4 and 5 proxy (by entering the proxy IP (localhost) and Port 8080 for http proxy OR 1080 for Socks Proxy), and I have successfully been using web browsers and some other softwares that support proxy/ allow proxy info to be entered to login/ connect to the internet. Your-Freedom also supports port forwarding.However, the softwares I intend to use do not have any options to enter proxy methods or proxy ports (as far as I have noticed). I have tried to proxify these 2 softwares using softwares such as SocksCap and Free Cap, but either they don�t work, or my settings in proxifying are not correct. I believe I will have to do port forwarding or proxify the softwares, but have been unable to do so in the correct manner.

Following is the info on the 2 softwares:

1.NOW Trading terminal:[FONT=Times New Roman]Normally when I start the NOW or Zerodha software, the software starts and I get a login screen, but under firewall conditions, I get the initial Splash screen but then the software stops with the error: [b][u]NOW Initialisation failed for Interactive Engine << os error>>.

2.PowerIndia Bulls:The software is written in Java and starts with a batch file (PowerIndiabulls.bat) located in C:UsersDEFAULT_USERNAMEAppD..... I converted this batch file to .exe (with battoexe software) and then ran it through a proxifying software. The .exe start properly without proxifying software but not under proxifying environment. Basically the software needs to connect to the internet using Port 443. I am also expected to keep ports 443, 41599 and 59598 open. software's requirement is available at Indiabulls Securities: Indiabulls Securities is a leading capital market company offering securities broking and advisory services, depository services, equity research services to its clients in India. (item no. 5).To confirm, while the software is unable to connect through port 443, you will get an error message: "Connection to Login Server could not be established" when you try to login with any random Username and Password.To know that the software is able to connect properly, you will get an error: "This User ID is not enabled to be used with this product".

View 1 Replies View Related

Cisco Firewall :: PIX Firewall 525 On Voice Network For 5000 CC Calls

Jul 10, 2012

can some one suggest me will it be recommended to use PIX firewall 525 on Voice ( sip ) network for 5000 CC to 1000 CC calls in signaling mode since our server are using public IP so will i be able to use it without NAT / PAT also will there be any issue of QOS.

View 1 Replies View Related

Network Layout For IP Camera VoIP System?

Mar 31, 2011

Alright, first off a little background. Im recent IT graduate (last spring) but not yet working in the field in any official capacitance. Its been about a year and half since I had my last Cisco class. Right now Im in the beginning process to work with locally own retailer setup a network infrastructure for IP camera and in the future VoIP, about 45 50 total IP devices when the project is complete.Nothing has been purchased yet but I have some candidates and a network layout planned, thought this is the first time Ie setup network of this type in the real world.Right now I looking at Netgear and LG/Ericsson (previously SMC, Nortel) switchesHavent gotten to the router yet and VoIP will come later.For either brand there would be one 1000MB 24 port switch and three 100MB switches, all of them 24 port and all will have PoE on all ports.[CODE]

View 4 Replies View Related

Cisco :: Adding 2960S Switch To Network And Voip?

Apr 16, 2012

I have 6 cisco switches already on my network and I just got a 2960S PoE switch that I need to enable for VoIP. The voice vendor is coming in to setup our phone system for VoIP and I need to enable this new 2960S 48 port switch for the VoIP phones, I don't know how to do that, or other taskes needed for this project.

I was told that I need to uplink the new 2960S with the Catalysy 4507R using an ethernet cable and to "trunk the ports" and enable the 2960S as a VTP client - ok great - how?

I was told I also need to use the switch port voice VLAN command for the new VLAN - again, great - but how?

I actually was able to telnet into the switch and I gave it an IP and I created a new vlan but thats all. We are using non Cisco IP phones.

View 4 Replies View Related

Cisco :: Find The Commands To Setup A VOIP Network?

Nov 16, 2011

I want to setup a voip network, there's going to be 3 switches connected to a Cisco CME router, my problem is I can't find information on how to configure it.

View 1 Replies View Related

Cisco :: IP Proxy-arp Vs Ip Local-proxy Arp

Jan 8, 2013

Anyone know the differnce between these two on a MLS? Seems that proxy arp as I know it works with or without the 'local' version.

View 7 Replies View Related

Home Network :: Proxy Authentication Using Netsh?

Aug 21, 2011

I am behind a SQUID proxy.I need to set proxy settings for cmd.I'm using win7 so proxycfg cannot be used.I used netsh like this: netsh winhttp import proxy source=ie

Internet explorer had my proxy settings already.Now the problem my proxy requires username/password authentication.I do not know how to set the username and password in command prompt.

View 1 Replies View Related

How To Bypass Proxy Detection On Public Network

Mar 4, 2011

I just switched schools and I work for HP's marketing team part time which entitles me to get on some websites blocked by our school's network (sonicwall block).I then tried a proxy on Firefox and it was blocked as the sonicwall detected that I was using a proxy. Why did this happen and is there a way to bypass?This is mainly on wired connection as the Ethernet isn't god awfully slow like wireless is.

View 1 Replies View Related

Using Bandwidth Of Multiple Users On A Proxy Network?

Jan 22, 2011

My college hostel has a broadband connection in each room, with individual servers, all of which are connected to a central server.Each hostel has a unique ip range(eg, and others like this, and students are allotted random ips). Each hostel has a particular proxy address that allows us to access the internand by low i mean, quite lowet, and each user has a fixed bandwidth(which is low). My question is, is there a way for one user of a particular hostel to use the bandwidth of multiple users of the same hostel(such that they are in the same ip range, and have the same proxy server for accessing the internet).i.e Is there a way for me to increase my bandwidth by using the bandwidths of other non allocated ips within the range of my hostel, such that with a single broadband connection, i can utilize the the unallocated bandwidth.

View 1 Replies View Related

Can't Connect To Any Wireless Network Proxy Settings

Jun 11, 2012

I have a new Dell Inspiron 14Z (purchased in February), it has been running great until recently, the internet connection (wireless) completely stopped working.When I try to connect through Internet Explorer, it says Internet Explorer cannot display the webpage. I Diagnose Connection Problems, and this is what I get:"Windows could not automatically detect this network's proxy settings." On Chrome, I got a long list of things to do (check DNS settings, LAN Network, etc. have tried every and all checked/unchecked box they advise.) This error shows up:Error 105 (net:: ERR_NAME_NOT_RESOLVED): The server could not be found. However, I accidentally uninstalled Chrome trying to fix this problem, so Internet Explorer is all I have.It's been about 2-3 weeks with no internet. Have tried connecting to 5+ different networks (Home- AT&T U-verse, University of Texas Network, restaurants, etc)tried restarting my computer, setting my LAN settings back to normal, and it still won't work. Other computers work on all of the networks I've tried, it's just mine that wont. [code]

View 13 Replies View Related

Work Proxy Bypass On Home Network?

Aug 23, 2012

When I'm at work, I have internet (though a proxy) and remote access to the linux computers at work (the work laptop runs win 7)when I have to work at home, the work VPN that we were given has no internet access but I can connect to the remote linux computer that I need just fine. the linux computer has no internet access and more often than not is missing modules and dependencies. Is there a way to enable my home wifi network and the VPN so that the work computer can access the internet locally while I'm working? just one browser is all I need.... I currently have to disable the vpn, download my modules and then connect, to install them.

View 5 Replies View Related

Setup A Proxy Server For Wifi Network?

Feb 6, 2012

I have a wireless router and own net work at my office I would like to be able to set up a proxy server in order to prevent certain users from reaching specific sites.

View 1 Replies View Related

Linksys PAP-2T Voip Adapter / Connect 2-3 Devices To An Existing Wireless Network

Aug 18, 2012

I need to connect a pc desktop and A linksys PAP-2T voip adapter to an existing wireless network(home network).

View 7 Replies View Related

Home Network :: Pros And Cons Of VPN Vs Web Based Proxy With SSL

Feb 24, 2011

Why would someone bother with VPN which is difficult to set up (I am told) when I can use a web based proxy many of which offer an ssl option?

View 5 Replies View Related

Home Network :: Share Internet Connection Using Proxy?

Jun 23, 2011

For my office i want to share my internet connection using proxy and i also want to restrict the websites.

View 4 Replies View Related

Windows Could Not Automatically Detect Network's Proxy Settings

Nov 26, 2011

I am running Windows 7 and I use a ZyXEL ZyAIR G-220 Wireless USB adapter for internet. I had a virus called something like Cloud AV 2012 so I used Malware Bytes to remove it and it worked just fine. However, now the internet does not seem to work (there's that yellow triangle with the exclamation point) and when I try to run diagnostics, the message "Windows could not automatically detect this network's proxy settings" comes up. So far, I've tried rebooting, disabling proxies in all of my browsers, and running scans, And I also cannot system restore, because apparently windows security was turned off and there are no restore points

View 1 Replies View Related

Windows 7 Could Not Automatically Detect Network Proxy Settings

Oct 20, 2011

I'm on windows 7 btw.When I diagnose the problem it says: Windows could not automatically detect this networks proxy settings I'm connected to the internet via cable on my laptop. Yes I'm using a router. The other computers connected to the router can connect to the internet but mine can't. It also says "unidentified network - no internet access" when I click on the computer icon in the bottom right corner of the screen. until I downloaded from a music site which gave me the virus I think. Now, I'm not certain if the virus is removed or not. I tried system restore point but it won't even let me restore my computer anymore for some reason, maybe because of the virus.

View 19 Replies View Related

Windows Could Not Automatically Detect Network Proxy Settings

Jan 5, 2013

I'm using my old laptop now. On my regular laptop, my internet icon has the yellow triangle and when I trouble shoot it, the message says "Windows could not automatically detect this network's proxy settings".Recently I noticed my computer was heating faster (and hotter) than usual so I ran a search again and it said no threats were found. I have ran the search twice since then and still nothing. I was advised to use ccleaner,malwarebytes, and Super Anti-Spyware. It removed one other threat but the problem was still there. I then started using combofix, but I did not like the look of it so I stopped that scan. It seemed a little sketchy. As of this morning, I'm having the internet problem. My old laptop (the one I'm on now) and my girlfriend's laptop work fine. I connected it with the Ethernet cord and that didn't change anything. I have Windows 7. It's on a 2010 Samsung (I'm not very tech savvy so I'm not sure about all the other details).

View 14 Replies View Related

Cisco Switching/Routing :: 3560 - Upgrade To Make Voip Network And Wireless?

Jan 21, 2013

i have 300 user in network  in 2 building and firist buiding 5 flors.i use subnet /22.i have core switch 3500xl fiber and 8 swith 3560 and my network have 2 router one for adsl and other for mpls so i want upgrade it to make voip network and wireless
so if i need replace switch what i model and how many?

View 5 Replies View Related

WNDR3700 Router And HP Procurve 1810g - Route Entire Network Through Proxy?

Apr 10, 2012

I wanted to know if I can somehow setup my network to use a proxy for all connected devices?

For example I can go into Firefox proxy settings and setup to browse using proxy. Is there any way to do this at the router or switch level to not have to configure every device individually I have a wndr3700 router and a HP procurve 1810g switch and am thinking of building a pfsense box.

View 8 Replies View Related

Cisco WAN :: 3945 To 7206 Router Via IGX 8400 / Configure VoIP With Existing Frame Relay Network

May 19, 2011

Application is that need to configure the VOIP  with the existing Frame relay network ,where VOFR  command is not shown in the router when type yhe command router config#dial-peer voice 123 need vofr On the 3945 router where in the router it is not accepting the above command,

View 8 Replies View Related

Asus X5DIJ Laptop - Windows Could Not Automatically Detect Network Proxy Settings

Apr 20, 2012

The other day i was on my mums laptop (ASUS X5DIJ) at her house all working fine the battery died so i plugged it in and started it up again however the charger cant have been fully connected and once back in windows the battery died again on the next boot i noticed windows said it had found the system CMOS/real time clock and had installed drivers for it. checked the driver details it says no driver files are required just like it should ever since then it connects to the network but will not connect to the internet at her house or at mine through wireless and ethernet cable although all other computers work fine windows troubleshooter says "Windows could not automatically detect this networks proxy settings"

I've tried
resetting routers and laptop = no change
netsh winsock reset and netsh int ipv4 reset = no change
ipconfig /flushdns = no change
ipconfig /registerdns = no change


View 9 Replies View Related

Way To Block Incoming Calls

Mar 16, 2012

I start to use the CM. I received a request to block a number,I need to block the call only on the Call Manager or also on the Gateway that I have?

View 6 Replies View Related

Get A Modem That Calls Using Analog?

Aug 29, 2011

Can I get a modem that calls using analog and once it reaches my ISP it converts to 64K?

View 1 Replies View Related

Inbound Calls Do Not Work Properly

Dec 1, 2012

I'm a new user of VOIP. My network connect is Cable modem -> router (Dir 615) -> ATA (SPA122) . Outbound calls have no problem. But inbound calls sometimes work, sometimes not ( got message: not in service)

View 1 Replies View Related

D-Link DIR-825 :: Can't Receive Any Inbound Calls

Apr 8, 2011

I have the latest Firmware version 2.05NA on the DIR-825 and while I can make outbound SIP calls I can't receive any inbound calls. The phone will ring but I can't pick-up the call. [code] I am at a loss as to how to register my phone.  When I uncheck ALG SIP the phone will not register to my server.I have a Polycom 550 connected to a Trixbox server.  The prior router worked great.

View 6 Replies View Related

Cisco VPN :: H323 Calls Dropping Over VPN?

Feb 9, 2011

We have 2 h323 IP phones (non cisco) that connect to an IP PBX via a VPN connection using PIX 5505's at each end.  The VPN seems to work fine and the phones can be used normally with good call quality, display, status...The problem is that when talking on the phones for any extended period of time, the phone reboots, drops the call and then restarts automatically.  This problem usually happens on phone calls lasting 20 minutes or more but has happened on calls as short as 15 minutes.  I have also made calls which have gone 45 minutes before the reboot.  I have removed everything from the network hosting the remote IP phones except for a single phone and the problem still occurs.  It is not a POE Issue as the phones can use a power brick and it still happens.  The same phones work perfectly on-site when not using the VPN.Someone has mentioned that I should adjust the UDP Timout Timers of the VPN.  I don't see any UDP timers and am at a complete loss on what is causing this.  The data traffic does not seem to get dropped when connected accross the VPN for hours at a time.

View 1 Replies View Related

Copyrights 2005-15, All rights reserved