I have the latest Firmware version 2.05NA on the DIR-825 and while I can make outbound SIP calls I can't receive any inbound calls. The phone will ring but I can't pick-up the call. [code] I am at a loss as to how to register my phone. When I uncheck ALG SIP the phone will not register to my server.I have a Polycom 550 connected to a Trixbox server. The prior router worked great.
View 6 RepliesI'm a new user of VOIP. My network connect is Cable modem -> router (Dir 615) -> ATA (SPA122) . Outbound calls have no problem. But inbound calls sometimes work, sometimes not ( got message: not in service)
View 1 Replies View RelatedI'm working on a project in which we have to transfer our mobile phone calls via internet and our mobile should be connected to pc via bluetooth. This is pretty easy at dialer's end but how to recieve the call via internet on some pc and direct it to the reciever via bluetooth.
View 2 Replies View RelatedRegion : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast
I just upgraded my DLink DIR655 to WDR4300. My VOIP service has worked for the last 5 years. But with WDR4300, I'm frequently experiencing dropped calls. The call will be cut off every 20 seconds or so. This is really a deal-killer.
I have a D link 655 wireless router and my magic jack calls end after 15 seconds.
View 2 Replies View RelatedI am trying to block port scans originating in the Russian Federation, thousands per day. I entered 77.88.26.0 as the Remote IP Start and 77.88.26.255 as the Remote IP End, setting the action to Deny. It shows in the inbound filter rules list but my linux server still receives thousands of scans daily from an ip address in that IP netblock. My DIR-655 is running hardware version A3 and firmware 1.34NA.
View 8 Replies View RelatedHow to configure the 825 to block inbound traffic from a specific internet IP address ?i noticed an IP and MAC that i don't recognize that is listed as a connection to my NAS's media server ...i blocked it in the NAS configuration page, but i don't want any unsolicited traffic into my network.
View 3 Replies View RelatedI just want to know how or is it possible to hide sent/receive packets from the Router I cracked few days ago?I'm using wifi card airlive wl-1600 usb and the router is TP-Link.I mean how much is possible to hide my connectivity and everything from me with this router?
View 1 Replies View RelatedI cant receive my email through windows live mail since i goit my router (i just got this problem with my hotmail account tho gmail work properly)
View 11 Replies View RelatedRegion : Sweden
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : TL-WR1043ND_V1_120405_
ISP : Tele2 (fiber)
I recently bought your router and I am trying to install it.The problem that I get is that when the router tries to get the dynamic IP from my provider, it gets nothing.I have typed in the DNS servers but no go. Without the router, my uplink works fine. The provider does not lock onto a specific MAC adress.
I have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.
View 1 Replies View RelatedI start to use the CM. I received a request to block a number,I need to block the call only on the Call Manager or also on the Gateway that I have?
I am encountering delays when making any calls using VOIP. I understand that there is always a delay using VOIP but not as much. I've done a bandwidth test on my network and everything seems to be Ok, we have 4 T1s with 55 Reps using it. There is nothing choking up the network.
View 3 Replies View RelatedCan I get a modem that calls using analog and once it reaches my ISP it converts to 64K?
View 1 Replies View Relatedin our office private network we are using a proxy server for internet connection sharing, we are unable to make voip calls through this proxy server?
View 1 Replies View RelatedWe have 2 h323 IP phones (non cisco) that connect to an IP PBX via a VPN connection using PIX 5505's at each end. The VPN seems to work fine and the phones can be used normally with good call quality, display, status...The problem is that when talking on the phones for any extended period of time, the phone reboots, drops the call and then restarts automatically. This problem usually happens on phone calls lasting 20 minutes or more but has happened on calls as short as 15 minutes. I have also made calls which have gone 45 minutes before the reboot. I have removed everything from the network hosting the remote IP phones except for a single phone and the problem still occurs. It is not a POE Issue as the phones can use a power brick and it still happens. The same phones work perfectly on-site when not using the VPN.Someone has mentioned that I should adjust the UDP Timout Timers of the VPN. I don't see any UDP timers and am at a complete loss on what is causing this. The data traffic does not seem to get dropped when connected accross the VPN for hours at a time.
View 1 Replies View RelatedAs stated in the attached picture, my company has a remote office which its PBX was connected to the main PBX via a pair of leased lines and a pair of E1/HDSL converters. (The distance is about 2 kilometers, so the E1 was converted to HDSL and then back to E1 at the remote site)
Now, IP network is developed between two sites.We want to transfer the calls via a pair of 2811 Routers, both equipped with VWIC2-1MFT-T1/E1, as the second part of the picture. I tried to find an straightforward document, but I was unsuccessful.What configurations should be made at both ends to transfer the calls to/from the remote site ?
I have programmed two E1 ports on Cisco 2811, one for E1-PRI and other for CAS. My running-config is as below
controller E1 0/0/0
framing NO-CRC4
clock source internal
ds0-group 1 timeslots 1-15,17-30 type r2-digital dtmf dnis
[code]....
I have made 4 as trunk group access on the PBX for E1-PRI and 8 as trunk group access for E1-CAS.I am able to dial 4-1-6261 to place calls on telephone 6261 from 6000(outgoing and incoming over PRI). And I am able to dial 4-2-6261 to place calls on telephone 6261 from 6000(outgoing on PRI and incoming on CAS).But I am not able to dial out from my PBX extensions over the E1-CAS card using 8-1-xxxx or 8-2-xxxx. I have patched two PBXs back to back on their E1-CAS ports and am able to dial out using 8-xxxx. So this means the trunk group allocation on PBX is working fine. The show controller e1 0/0/0 is showing normal stats.When I do a show voice port 0/0/0:1 I see that one of the ds0 timeslots are being seized when I try to dial out on 8-x-xxxx but the Out Status column entry against the timeslot says clear_bak.When I am placing calls on PRI, I don't see any such indication against the timeslot being seized.Basically since I am able to dial in to my E1-CAS port, the line coding, framing, signaling(to some extent) must be right, or so I guess. But am not able to dial out.
About 2 years ago I bought my first laptop and the person I was with recommended my purchasing of a Belkin router. I bought the router, it worked great until this past summer when suddenly whenever somebody called my house phone, my connection was dropped. I was angry cause naturally I have those family members that want to call and talk on the phone with my mother for hours. Eventually I figured out I could work about the problem by hooking the Ethernet cord on my Westel directly to my laptop. Its a temporary fix though in my opinion because this requires me having to sit on the floor against my bed room door and this isn't comfortable, not to mention its also confining, I miss walking around the house with my laptop. Anyway this past weekend I decided to try buying a new Belking N300. This however didn't solve the problem, I still got my signal dropped whenever somebody called the house.
View 14 Replies View RelatedWhat is the maximum possible ISDN calls on Cisco 7206VXR router using PRI links and PRI supported cards.
View 7 Replies View RelatedI heard from customers calling into the office stating that they have experienced some issues with our prompts and the extension input, that it is not recognizing their input. Stating sometimes it does not work on their land line but once they call back on their cell phone it works. We in the office all had people from the outside call from a land line to our office to verify the issue but the calls went through. We are thinking that they may be dialing the wrong extensions.Has anyone had any issues with land lines having trouble calling in.I am running cucme connected to a sip trunk.
View 4 Replies View RelatedMy samsung galaxy next turbo GT-s 5570 keeps saying emergency calls only all the time?
View 1 Replies View RelatedI have a DSL connection and obviously it coming through the phone line. Is there any kind of software that I can use to make landline calls through my computer? The DSL modem is ZXDSL. I know I can use Skype, vBuzzer and Google Talk etc etc. But I want to make calls through my landline using my computer or laptop.
View 11 Replies View RelatedI have CUCM 8.5 in a lab environment that connects to a Cisco 2801 which has a VIC2 FXO card on board, I have believe that I have configured the MGCP correctly and also configured my CUCM correctly but I'm just getting a fast busy when I make a call through the PSTN, I have tried removing the Ethernet cable from the Router just to test what happens when I dial external and again I get fast bust.
Here is my configuration setting: -
From CUCM gateway details:
Gateway Name MGCP
Protocol MGCP
AALN/S0/SU1/0@MGCP
AALN/S0/SU1/1@MGCP
AALN/S0/SU1/2@MGCP
AALN/S0/SU1/3@MGCP
[code]....
Have a asterix PBX running my system and I upgraded my security with a cisco ASA 5505. Now all the extensions are working including the remote once. Everything elase like internet.Other servers all working fine. Only problem is that when ever someone dials a landline number from an extension it does not go through.seems like the firewall is blocking it but I cannot figure out why or how. All the NAT and Access list is fine. Although I have no idea how to accept the SIP PROXY IP through the firewall and I am guessing that might be the problem. There is no any other problem and I am 100% satisfied with the ASA5505 except this problem
View 3 Replies View RelatedI have an SA520 that is being used as a front end firewall. Behind it I have an IP PBX. The VOIP provides are registered and I can make outgoing calls. However It appears that the SA520 is either blocking or not routing the calls. I have opened the ports recommended by both the IP PBX and the VOIP provider. What do I need to do to make incoming calls through the SA520?
View 1 Replies View RelatedWe're having some numbers ported over to us and we'd like to verify that we are in fact receiving all of the numbers at our SIP gateway. Since we have been getting more and more activity on this router, I'm becoming more concerned about using certain debug's for fear that the router maxes out CPU and drops.
What the best debug command would give me this information with minimal impact on CPU? In the past I've used 'debug ccapi inout' and a couple of others similar to that. With so much activity though sometimes it bombs the router. Also I am logging to the console directly, maybe there is a better method with less CPU impact. I just don't want to have to go back and forth to look for stuff 50 times either if I write out to a file or something, it could work though I suppose.
I'm in charge of the IT of a dorm with 200 inhabitants. A lot of people complain about the bad quality of "skype-calls". Audio is delayed and video stucks. The actual speed of our internet connection should be fast enough so I guess it has something to do with the QOS setting. I checked it on our WLC 3750 and right now we use Silver (best effort). Could there be any improvement when I set it to Platinum?
View 15 Replies View RelatedWe have a Cisco Router 3825 which we use to convert phone calls from PSTN to SIP.Can any one suggest us (or point to a documentation) as to how can we use this router as a load balancer (to balance load among different SIP terminals) ?
View 3 Replies View RelatedI know the problem lies in the timeout for the default inspection rules. I cannot find where to change this.I have nat statements for 1 to 1 nat to my polycom and tandberg video devices. I have set the firewall for the ouside to in rules to inspect all. This allows the devices to communicate with public addresses, but the video calls drop after 1 hour. How do I change the settings so this does not happen. I have tried setting the rule to allow instead of inspect, but when I do this, I have no access at all. I just want to nat 1 to 1 and allow all traffic to the nated devices. I know this is not secure but it is the only way to allow h323 through to let the video conferencing devices work.
View 1 Replies View RelatedI just bought an e2500 to replace my WRT54g, hoping that it would fix my call dropping problem. I had tried installing some friend recommended third party firmware on the WRT54g that he said would fix my problem, and with my infinite technological wisdom and experience ended up bricking it.
My problem is that randomly during skype calls with my family back home, I will lose internet connection. It drops the skype call and then I cannot open a web page or anything for about 60 seconds. My internets dead, then it just starts working normally again by itself. I can have anywhere from 60 seconds of connectivity up to 20 minutes or more while skyping. This all happens over a wired connection. Changing the router didn't change a thing, the problem still happens in exactly the same way. I have good bandwidth and all that stuff.Also, I watch netflix on my Xbox 360 over a wireless connection. Sometimes it will just lose connection in the middle of a show. However, the difference is that I can reconnect almost instantly after an interruption on that device. I have fixed the settings on the two different channels according to one of the other post I found in this community, and have not tried those settings out yet. This doesn't worry me as much as the wired connection issues.
We have a 100Mbps metro-ethernet link connecting to a remote site. This link is terminating in our 3750-x stack switch.We are getting a LOT of output drop on that interface and our remote IP Phone calls keep going off because of that.I've disabled all kind of QoS, but no luck.
View 16 Replies View RelatedFor some reason I can no longer make Wi-Fi calls with my E1200 router. I have checked with my ISP and T-mobil. They both tell me that everything on their respective ends is working correctly. The only piece of the equation is the router.
View 5 Replies View Related