Cisco WAN :: 7206VXR - Maximum Possible ISDN Calls?

Jun 12, 2011

What is the maximum possible ISDN calls on Cisco 7206VXR router using PRI links and PRI supported cards.

View 7 Replies


Cisco WAN :: Maximum Performance On Router 7206VXR (NPE-G2)

Oct 31, 2011

am use router Cisco 7206VXR (NPE-G2) ram 1G now am enable bgp routing full route aboute 400K record , ospf routing maximum traffic throughput is 400 Mbps but the cpu utilize is 80%

View 3 Replies View Related

Cisco Switching/Routing :: Q931 / ISDN BRI Branch Connecting To ISDN E1 At Central Site?

Jun 6, 2012

I have senario where 15 branches via bri connection to central ISDN E1 Pri Head office.The setup is working before and suddenly branches not able to dial head office.Below is the debug q931  logs from branch router  and i am  getting continous "channel not avalible message on Head office 
Branch router logs
hmc#isdn test call interface bri 0/0/0 44492999
007049: Jun  6 14:41:39.497 gmt: ISDN BR0/0/0 **ERROR**: handle_l2d_srq_mail: Layer 1 inactive
007050: Jun  6 14:41:39.721 gmt: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/0, TEI 78 changed to up
007051: Jun  6 14:41:39.721 gmt: ISDN BR0/0/0 Q931: Sending SETUP  callref = 0x002E callID = 0x84BC switch = basic-net3 interface = User
007052: Jun  6 14:41:39.721 gmt: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8  callref = 0x2E


View 1 Replies View Related

Cisco :: Running ISDN On PRI With BRI?

Jan 21, 2013

connecting PRI to BRI interface on ISDN. I have all this information provided by the TELCO and i have configured it but due to some reason i am not able to connect them. I have given the questions with answers provided by the TELCO. I am also providing the running configuration of the PRI interface and also the error message i am getting when trying to test call itself.

1. Is the PBX designed for Pre-National or NI-2 protocol? -
Protocol using C7MATL
2. Are there any DID station numbers that your CPE cannot accept? -
(i.e. 0 or 9 in the 4th position)
3. Which carriers will be your choices for your PIC and LPIC? -
Carrier using DChannel


View 2 Replies View Related

Cisco WAN :: Configuration Of 2x ISR 886 In ISDN

Aug 28, 2012

I'm trying to configure 2 routers (cisco 886) to create a link between them via ISDN link (in france) but it doesn't work
I think I put a base conf but nothing work :
LAN 1 ( => BRI0 ( Cisco 886 <= ISDN =>  BRI0 ( Cisco 886 => LAN 2 (
both conf are about the same (not IP and phone number) :
interface BRI0
ip address
encapsulation ppp
dialer idle-timeout 600
dialer string xxxxxxxxxxxxx
dialer-group 1
isdn switch-type vn3 (code)

View 5 Replies View Related

Cisco WAN :: 2800 - ISDN PRI And BRI Configuration

Jun 4, 2011

I have a Cisco 2800 series router with E1 PRI module at Head Office,and Cisco 786 with single ISDN BRI port,When I dial from either side only one B channel is up ,means 64 K only.

View 1 Replies View Related

Cisco WAN :: 1571 - ISDN BRI And Ethernet

Aug 5, 2012

I have a problem with ISDN BRI-1B-S/T-V3. In the documentation I read: "The ability to add BRI connectivity via a WLC lets administrators maximize valuable slot space while it provides additional connectivity options, such as Ethernet, on the same module." Does it mean that I can plug in the module Ethernet and it will work? I ask, because i have CISCO 1571-V router with this isdn module, i get the internet from Ethernet, and i wonder is there any possibility to use this module as WAN.

View 1 Replies View Related

Get A ISDN Modem With At Least 4 Channels?

Aug 12, 2011

Where you get get a modern ISDN modem with at least 4 channels? I am 2 miles from Cable and .5 miles from dsl.ISDN is the only option cause I play games online. Would 256K or 128K Up and Down be enough for playing FPS games on xbox live? I cant find any ISDN modems that are new. Only used ones on ebay that I dont know would work on windows 7.

View 1 Replies View Related

Cisco :: Outbound Calling To Two ISDN BRI Ports?

Oct 21, 2011

Both of these ISDNs are up, this gives us 4 channels. Someone said they recieved a busy tone when they attempted to dial out. I looked over the system and seen there are two outbound pots dial-peers. Each dial-peer references one of the BRI ports. The preferences are the same on each dial-peer. I think what is happening is that the system is randomly selecting one of the dial-peers due to the preference, even if both channels of the BRI are in use. How does the system know if that port has both channels in use? I've not used ISDN before, so tried to enter the B-channel sub interface and the system (UC500) tells me I cannot do this. I was thinking about adding each channel into a trunk group and then referencing the trunk group in the dial-peer. I can obviously add both BRI's into one trunk group.

View 2 Replies View Related

Cisco WAN :: Can Use Vwic2-1mft-g703 For ISDN PRI

Dec 4, 2011

Can I use module vwic2-1mft-g703 for ISDN PRI?

View 1 Replies View Related

Cisco WAN :: Cannot Dial Out From ISDN Line With 1812j

Jan 11, 2011

Now I am tring to setup Cisco 1812j with ISDN Line.
Here is what I connect the device. (I am in Japan)
ISDN Line (NTT east) >> DSU(NTT east INS Mate V30Slim with S/T port) >> Cisco 1812j(S/T)
On DSU setting I enable DSU and Disable Terminator.
First of I would like to test outbound call. Here is the config.
interface BRI0 ip address encapsulation ppp dialer map ip name Router1 broadcast 080********(Cell Phone Number) dialer-group 1 isdn switch-type ntt isdn point-to-point-setup ppp authentication chap ppp chap password 0 CISCO ip route BRI0
Then I test by ping with #debug dialer. #ping
And I could not receive a call by my cell phone landline either.
Here is the debug.


View 8 Replies View Related

Cisco AAA/Identity/Nac :: ISDN Authorization With RADIUS Using ISE 1.1.2?

Nov 19, 2012

I am trying to move my ISDN dialup branches authentication/authorization from old ACS 4.1 to ISE appliance. Before it was through ACS 4.2 with TACACS protocol but now since we are moving to ISE we are moving them to ISE with radius.
Problem is that isdn client gets authenticated and authorized but calls get dropped and they dont able to communicate with HO. IP address is assigned by Head End router to all remote isdn dialing branches..
I have used default "PermitAccess" in authorization policy and authentication policy is also default. I dont understand where I am going wrong as authentication and authorization is sucessful.
aaa authentication ppp default group radius local
aaa authentication network default group radius
aaa accounting network default start-stop group radius
 radius-server host
radius-server key *****

View 8 Replies View Related

Cisco WAN :: 886VA - VDSL Over ISDN With PPPoE

Aug 8, 2011

I will install in the next days a 886VA router (VDSL over ISDN using PPoE). Since I have no possibility to verify the VDSL config, this is what i prepared. Is this config OK (only VDSL part) ?
controller vdsl 0
operating mode auto
interface Ethernet0
[ code]...
For VDSL over ISDN the interface Ethernet0 must be used instead of ATM . Is this config correct ?

View 5 Replies View Related

Connecting Pstn (modem) To ISDN (TA)?

Feb 21, 2011

our client are using PSTN (modem) and is dialing up to our ftp box which is using ISDN (TA). according to them, they not facing any problem to dial up to other vendor which is using the same network infra (PSTN to ISDN). but, unfortunately in wont happen in my case which they (client) keep receiving the busy tone when they dialing to our ISDN no. i've set in our TA to accept both digital and analog calls and i'm using the DSS1 protocol which been told by our line provider.

View 2 Replies View Related

Cisco :: Simulating ISDN In Lab Using Serial Or Ethernet Interface?

Mar 4, 2012

Is it possible to simulate ISDN in a lab using a serial or ethernet interface. I want to setup FR and have ISDN running between a couple of routers with DoD routing.

View 6 Replies View Related

Cisco WAN :: 2600 - Debug Constantly Comes Back When Try To Do ISDN

Mar 1, 2005

I have a 2600 with a PRI card, when I try to do an isdn test call int s1/0:23 ######### the debug constantly comes back with "Cause i = 0x83E020 - Mandatory information element missing" Vendor states he doesn't see the SDN 'flag' coming through.  I have both the isdn nsf-service, and the dialer map configured to use a class with the outgoing sdn command.

View 10 Replies View Related

Cisco WAN :: 2811 - Configuring ISDN Backup Connectivity

Jun 13, 2011

I have configured Cisco 2811 and 3825 routers to connect the main and remote sites as per the attached topology. At the main site, the Cisco 3825 router is equipped with SFP ports (HWIC-1GE-SFP with GLC-LH-SM=) for fiber optic connectivity and also has a HWIC-1CE1T1-PRI installed The Cisco 2811 routers at the remote sites are each equipped with a WIC-1SHDSL-V3 module for SHDSL connectivity and with a WIC-1B-S/T-V3 for backup ISDN connectitivty.
In normal time the routers are using the SHDSL to Fiber optic connectitivty for communication. This has already been configured and is working. Now, there is a need to implement a backup connection between these sites such that in case the SHDSL or fiber optic connectivity fails, the routers should automatically dial up the backup ISDN connectivity so as to ensure business continuity.

View 3 Replies View Related

Windows 7 Driver For BT Speedway ISDN PCI Card

Dec 7, 2011

I have a (legacy) bt speedway ISDN card currently in a machine running XPI want to move it to a newer machine running Win 7.Does anybody know how to find the drivers?

View 1 Replies View Related

Linksys Cable / DSL :: Make Cisco 857 Router Work On ADSL Over ISDN

Aug 24, 2011

Is there any way I can make the cisco 857 router work on ADSL over ISDN?

View 2 Replies View Related

Cisco WAN :: 1801 Device Repeatedly Calling ISDN Backup Line?

Jan 13, 2009

we have a Cisco 1801 at one of our remote sites that uses an ADSL line for it's primary connection and ISDN as backup. Despite no apparent problems with the ADSL line the ISDN is repeatedly dialling the internet every 2-3 mins during office hours and considerable expense to the customer.

View 3 Replies View Related

Cisco Switching/Routing :: C6500 / SNMP-server Traps For ISDN?

May 17, 2012

Trying to migrate the config run on IOS 12.1 to 12.2 ?It seems there's no snmop traps isdn command support on 12.2.
where i can enable trap on ISDN over IOS 12.2 (33) sxj1 running on C6500 chassis?

View 2 Replies View Related

Cisco Switching/Routing :: Errors Establishing ISDN Communication 1841 BRI

Oct 16, 2012

I'm trying to dial a Cisco 1841 BRI from my Cisco 2811 PRI.  I'm getting a few errors but not sure what else to do to correct the issue.  Config & Logs below from 1841:

interface BRI0/0/0no ip addressencapsulation pppdialer pool-member 2isdn switch-type basic-niisdn point-to-point-setupno cdp enableppp authentication chap callin
00:26:44: ISDN BR0/0/0 Q931: RX <- SETUP pd = 8  callref = 0x46 Bearer Capability i = 0x8890   Standard = CCITT   Transfer Capability = Unrestricted Digital   Transfer Mode = Circuit   Transfer Rate = 64 kbit/s Channel ID i = 0x89 Signal i = 0x40 - Alerting on - pattern 0  Called Party Number i = 0xC1, '452####'   Plan:ISDN, Type:Subscriber(local) Locking Shift to Codeset 5 Codeset 5 IE 0x2A  i = 0x808001039E05, 'From ', 0x8B0C, '214 ###-####', 0x8001, '<'00:26:44:

View 2 Replies View Related

Cisco VPN :: SA-VAM Not Supported In 7206VXR?

Feb 22, 2011

I have a Cisco 7206VXR with NPE-400. The IOS version is 12.4(24)T3. I installed a SA-VAM in the router in slot 6 but getting the following on the console.
AP-Pune-RT#Feb 23 11:16:34.484: %PA-3-NOTSUPPORTED: PA in slot6 (Unknown (type 650)) is not supported on this chassisFeb 23 11:16:34.484: %PA-3-DEACTIVATED: port adapter in bay [6] powered off.Feb 23 11:16:34.584: %PA-2-PABRIDGE: Failed to config bridge for PA 6Feb 23 11:16:35.384: %PA-4-IMPROPER_REMOVAL: Improper removal for slot 6.Feb 23 11:16:35.384: %PA-3-DEACTIVATED: port adapter in bay [6] powered off.Feb 23 11:16:35.468: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed        connection id=975, sequence number=677864
Is the SA-VAM not supported in the Router 7206VXR?

View 3 Replies View Related

Cisco WAN :: How Many Routes Support 7206VXR With NPE-G2

Jul 24, 2011

How many routes support 7206VXR with NPE-G2?

View 2 Replies View Related

Cisco WAN :: 7206vxr Acceptable CPU Level

Jan 18, 2012

We have a 7206VXR with an NPE-G1 processor. We're running the standard stuff on it, but here are the highlights.We just enabled netflow on it to send the data to an external source for analysis and the overall CPU level increased, but not significantly. About what should we expect for the overall CPU level? At this point, it's averaging close to 40% during peak hours.

View 4 Replies View Related

Cisco :: RICS0001 Error For 7206VXR

Nov 28, 2011

I am having trouble  with gathering inventory for  7206 XVR devices. I got this error:
RICS0001:Internal Error,unable to process the collected data from the device
How can I  make the inventory work for these devices ?
Here's an excerpt from IC_Server.log:
[ Tue Nov 29  16:24:53 CET 2011 ],ERROR,[Thread-31],,458,SQL Anywhere Error -193: Primary key for table 'MemoryPool' is not unique


View 2 Replies View Related

Cisco WAN :: High CPU Utilization On 7206VXR

Jan 7, 2013

High cpu utilization on cisco 7206 vxr router.[code]                                    

View 2 Replies View Related

Cisco WAN :: 7206vxr Freezes During Booting?

Sep 13, 2011

System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 2006 by cisco Systems, Inc.Socket jumper: not present Failsafe jumper: present = normalFPGA revision 0x00000026C7200 platform with 2095104 Kbytes of main memory

Readonly ROMMON initialized

Self decompressing the image : #################################################################################################################################### [OK]
%ERR-1-SRAM: Bus error on SRAM interface%ERR-1-FATAL: Fatal error interrupt, No reloadingerr_stat=0x80, err_enable=0xFF, mgmt_event=0x10

System bridge dump:
PCI B:3 D:0 F:0 Reg:0x00: device and vendor id           = 0x648511ABPCI B:3 D:0 F:0 Reg:0x04: status and command             = 0x02B00000PCI B:3 D:0 F:0 Reg:0x08: class code and rev id          = 0x05800004PCI B:3 D:0 F:0 Reg:0x0C: hdr type, lat timer and cls    = 0x80804000PCI B:3 D:0 F:0 Reg:0x10: PCI CSN0 BAR (LOW)             =


View 2 Replies View Related

Cisco WAN :: High CPU Utilization On 7206VXR (NPE-G1)

Jun 20, 2012

I am observing very high CPU utilization on my Cisco 7206VXR (NPE-G1) Router. We have done all the necessary troubleshooting but not able to identify root cause. [code]

View 10 Replies View Related

Cisco WAN :: 7206VXR (NPE-G2) Sudden Reboot

Aug 3, 2011

I have CISCO 7206 router with NPE-G2 and 2 gig of memory. There's a vpn and pppoe servers on this unit and it hold maximum of 250-300 simultaneous connections. Periodically (1-5 times/hour) router suddenly reboots with lots of messages in console:
IPFLOW: Warning: V5 overfill -Traceback= 0x14975E4z 0x1A133F4z 0x1A16CC0z 0x1A17754z 0x1A17870z 0x3337874z 0x28F80Cz 0x66A704z
*** System received a Software forced crash ***

I googled about first "V5 overfill" but no luck, i analyzed crashifo's with cisco tool and it said - it is ios problem, but if i change ios - problem lives again, no matter which ios i use.

View 6 Replies View Related

Cisco WAN :: QOS Marking Query Of 7206VXR

Nov 2, 2011

We have subscribed for MPLS links from Service provider we have a DC where the core connectivity is 90 MB and Remote branch location Connectivity is 64 Kbps. We are in process of enabling QOS for our links with co-ordination with Service provider ; as per our finding the branches have more RX traffic (downloading) so after discussion with provider we were advised to mark traffic from the core end and give it to the provider.The provider at its PE will honor the marking and set some B/W percentages and prioroty based on the DSCP marking values.
We need to mark this traffic so it is feasible to mark the traffic at the core DC router which has the below H/W details,Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/65536K bytes of memory.
Processor board ID 36161439
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.11
or is it feasible to mark the traffic at the core switch.

View 6 Replies View Related

Cisco WAN :: Can PA-1GE Module In 7206VXR With NPE-G2 Be Configured

Mar 4, 2012

Can a PA-1GE module in a 7206VXR with an NPE-G2 be configured to negotiate/work with a 100mbps Vendor provided Ethernet Port? The router sees the interface but it is in up/down.

View 1 Replies View Related

Cisco VPN :: H323 Calls Dropping Over VPN?

Feb 9, 2011

We have 2 h323 IP phones (non cisco) that connect to an IP PBX via a VPN connection using PIX 5505's at each end.  The VPN seems to work fine and the phones can be used normally with good call quality, display, status...The problem is that when talking on the phones for any extended period of time, the phone reboots, drops the call and then restarts automatically.  This problem usually happens on phone calls lasting 20 minutes or more but has happened on calls as short as 15 minutes.  I have also made calls which have gone 45 minutes before the reboot.  I have removed everything from the network hosting the remote IP phones except for a single phone and the problem still occurs.  It is not a POE Issue as the phones can use a power brick and it still happens.  The same phones work perfectly on-site when not using the VPN.Someone has mentioned that I should adjust the UDP Timout Timers of the VPN.  I don't see any UDP timers and am at a complete loss on what is causing this.  The data traffic does not seem to get dropped when connected accross the VPN for hours at a time.

View 1 Replies View Related

Copyrights 2005-15, All rights reserved