Cisco :: Setting Transparent Proxy To A Proxy Running On A Client?

May 28, 2012

I would like to connect devices to my network so that their traffic passes through a proxy running on my computer. I figured the best way to do this is by setting the proxy on my router to the one I am running, but then I would need to have another connection to the computer running the proxy or else there would be an infinite loop ?? something like that. so:

Internet -> router (1) -> my proxy on comp A -> router (2) -> computer B

View 1 Replies


ADVERTISEMENT

Cisco Firewall :: Debian Transparent Proxy With ASA 5520?

Apr 21, 2012

recently i have install asa 5520 (8.2) in my networks.Earlier I was using my transparent proxy with 2821 by the following configuration access-list 120 deny   ip host 192.168.112.12 anyaccess-list 120 permit tcp any any eq wwwaccess-list 120 deny   ip any any route-map PROXY-REDIRECT permit 10match ip address 120set ip next-hop 192.168.112.12 ip policy route-map PROXY-REDIRECT and was working fine. How i can use my transparent proxy with ASA?

View 2 Replies View Related

Cisco WAN :: 2811 - WCCP Transparent Proxy Over DMVPN

Nov 20, 2010

I´m trying to config a wccp web-proxy in a ISR 2811 at branch network. I have an Iron Port at Head-Quarter.
 
The idea is that the users at branch network, transparently forward http traffic to Iron Port at Central-Office and from them go to Internet.
 
The communication between sites is over DMVPN. I have two GRE tunnels running OSPF.
 
The Iron Port is configured as wccp v2 transparent redirection with forwarding method L2 or GRE an retunr method as L2 or GRE.
 
I receive packets on the branch router "Here I Am" but it get a message on debug:

Nov 21 19:26:07.067 GMT-2: WCCP-EVNT:D10: Here_I_Am packet from 172.16.10.10 w/bad fwd method L2, received indirectly via Tunnel1Nov 21 19:26:07.067 GMT-2: WCCP-EVNT:D10: Here_I_Am packet from 172.16.10.10 with incompatible capabilites

Nov 21 19:46:07.035 GMT-2: WCCP-PKT:D10: Sending I_See_You packet to 172.16.10.10 w/ rcv_id 0000004F

View 1 Replies View Related

Cisco Firewall :: 5510 Unmatched HTTP Traffic To Symantec Public Transparent Proxy

Sep 4, 2012

I am working on a task of redirecting any unmatched http traffic to Symantec public transparent proxy through Cisco ASA. For the definition of uncatched http traffic, we have inbound squid servers for deploying IE proxy pac and redirect the http traffic to Symantec public transpraent proxy, however we can't deploy IE proxy pac to mobile device and non-support web browers.Since we have some application using IE proxy setting for direct http communication with external domains, the current symantec policy addes those domains in the exception list so that they are not redirect to Symantec public transparent proxy server.
 
-For the platform - Cisco ASA 5510 ASA 8.4(4)1

-For the solution, I have the following two nat rules

View 10 Replies View Related

Security / Firewalls :: Using Non-proxy Software Through Proxy?

Mar 31, 2012

I access the internet from my company�s LAN, which has a restrictive firewall, so I cannot request the admin to open any ports manually for me. Hence I use a software called your-freedom. This proxy software supports both http as well as socks 4 and 5 proxy (by entering the proxy IP 127.0.0.1 (localhost) and Port 8080 for http proxy OR 1080 for Socks Proxy), and I have successfully been using web browsers and some other softwares that support proxy/ allow proxy info to be entered to login/ connect to the internet. Your-Freedom also supports port forwarding.However, the softwares I intend to use do not have any options to enter proxy methods or proxy ports (as far as I have noticed). I have tried to proxify these 2 softwares using softwares such as SocksCap and Free Cap, but either they don�t work, or my settings in proxifying are not correct. I believe I will have to do port forwarding or proxify the softwares, but have been unable to do so in the correct manner.

Following is the info on the 2 softwares:

1.NOW Trading terminal:[FONT=Times New Roman]Normally when I start the NOW or Zerodha software, the software starts and I get a login screen, but under firewall conditions, I get the initial Splash screen but then the software stops with the error: [b][u]NOW Initialisation failed for Interactive Engine << os error>>.

2.PowerIndia Bulls:The software is written in Java and starts with a batch file (PowerIndiabulls.bat) located in C:UsersDEFAULT_USERNAMEAppD..... I converted this batch file to .exe (with battoexe software) and then ran it through a proxifying software. The .exe start properly without proxifying software but not under proxifying environment. Basically the software needs to connect to the internet using Port 443. I am also expected to keep ports 443, 41599 and 59598 open. software's requirement is available at Indiabulls Securities: Indiabulls Securities is a leading capital market company offering securities broking and advisory services, depository services, equity research services to its clients in India. (item no. 5).To confirm, while the software is unable to connect through port 443, you will get an error message: "Connection to Login Server could not be established" when you try to login with any random Username and Password.To know that the software is able to connect properly, you will get an error: "This User ID is not enabled to be used with this product".

View 1 Replies View Related

Cisco :: IP Proxy-arp Vs Ip Local-proxy Arp

Jan 8, 2013

Anyone know the differnce between these two on a MLS? Seems that proxy arp as I know it works with or without the 'local' version.

View 7 Replies View Related

Sansung TV - No Proxy Setting / Getting It With Wired Hub?

Sep 27, 2011

So we purchased a Samsung PN64D8000 television for our company. The TV is "internet-ready", provided you don't use a proxy as a security measure.I phoned Samsung, scoured the web and confirmed that there is no way to specify the use of a proxy server and port on this television.Or... is my fear correct that proxy's can only be configured on the end device using the internet connection.

View 2 Replies View Related

Setting Proxy Using Freegate - Proxifer And Ccproxy?

Aug 27, 2012

I have two computers (192.168.1.101 and 192.168.1.102) connected to a TP-Link TD-W8960N (192.168.1.1).I have the following softwares:[URL]However "Freegate" is a proxy software, but it still has some restrictions on particular websites, so I planned to bypass this limitation like this:

1. I ran the Freegate on 192.168.1.102 and then opened CCProxy and then I used Proxifer to set all data transmissions of CCproxy through Freegate by setting a rule in Proxifer. I put IP: 127.0.0.1 Port: 8580 Protocol: HTTP in Proxifier.

2. I ran Proxifier on 192.168.1.101 and set the IP: 192.168.1.102 Port: 808 Protocol: HTTPS as the proxy setting in it.I checked the internet and the configuration was successful. It seemed like I had directly run Freegate on this computer and since I tested those particular websites and they were blocked by Freegate servers, so everything was correct.

3. Now I managed to set a chain proxy configuration in Proxifier in 101 so I could bypass the Freegate limitation. I went to Free Proxy List - Public Proxy Servers (IP PORT) - Hide My ***! and picked some free SOCKS5 and HTTPS proxies. I tested them individually to see if they were working properly and they were. Then I set the chain proxy like this:

192.168.1.102:808 (HTTPS)
IP:Port (HTTPS/SOCKS5)

It didn't work... I received "connection closed unexpectedly" in Proxifier on 101 and "IP (the IP I picked up from hidemyass) : Client requested HTTPS connection. use separate HTTP connection for this." on 102.

1. I also tried Port Forwarding on my router and it didn't work either.

2. I couldn't connect CCProxy to Freegate via other protocols in Proxifier rather than HTTP. When testing I got the error that Freegate doesn't support SSH protocol. This most likely means that there is no built-in interface in Freegate to allow other softwares to connect to it via other protocols rather than HTTP.

3. I used port scanner to see if any other ports were open on 127.0.0.1 so I could use another protocol, and nope there wasn't any rather than 8580 : HTTP.

View 3 Replies View Related

Setting Up Proxy On Home For Business Purpose

Mar 28, 2012

I am attempting to set up a proxy on a home network that is used for business purposes. I am not at all a networking person, I know enough to be dangerous. If I follow the steps listed here: URL Will this encrypt the data that is sent to the internet from any computer that connects to my network or just the one I follow the steps on?

View 7 Replies View Related

Proxy Setting To Connect Wireless Modem On Another Computer By Wan?

Feb 23, 2011

I am having wireless modem to connect the internet of BSNL, I Want to connect internet by wireless lan to another pc

proxy settings for connection

View 1 Replies View Related

D-Link DIR-655 :: Setting Up Udpxy Proxy To Stream Ip-tv Channels To My Phone?

May 12, 2012

i want to watch IP TV on my HTC DESIRE, i have DIR-655....how to setup udpxy proxy to stream ip-tv channels to my phone?

View 1 Replies View Related

Cisco VPN :: 5520 / Unable To Use Proxy Server With MAC OS X Anyconnect Client?

Dec 13, 2012

I have a VPN setup thru a Cisco 5520, Windows clients connect just find and the end users configure there browser to use our internal proxy servers.   Users with the MAC OS X Anyconnect client can connect, they configure their Mac to use our proxy server, but the broswers will not work, clients can reach networks and resources behind the VPN gateway and have access to the Proxy(Tried a telnet to that hostname/port). I am running ASA 8.3(2), Anyconnect(OS X) 3.1.01065.

View 3 Replies View Related

Setting Proxy Server On Peer To Peer Network

Jan 28, 2011

One of the schools whose networks I administer has a peer to peer network running about 30 xp machines. DHCP is achieved and DNS settings distributed via a basic Linksys router; is there any way of distributing proxy server address and port short of entering manually in LAN settings of IE on every terminal - there is no budget to install a server.

View 4 Replies View Related

How To Run Utorrent On Proxy

Mar 27, 2011

i am currently using the college internet, but due to restrictions utorrent is somehow blocked we use a proxy ip and port to use the neti've tried "tor" but it too is blocked now i am unable to use torrentspls suggest any other effective proxy softwares

View 1 Replies View Related

Some Sites Available Only Through Proxy?

Nov 1, 2011

I have recently been having a very annoying problem with my internet connection. I am not able to connect to some websites: the sites that are unavailable can not be accessed on any device connected to my home network (wireless or plugged directly into the router). I know that the problem does not lie with the sites themselves, since they are working for other people, and I know the sites are not blocking my IP, because when I reset the router, the problem sites become accessible but other sites become inaccessible (on all devices). The problem isn't the router either: I've tried two, and the same problem has arisen with both. Moreover, I have established that the problem does not lie with DNS resolution. I have repeatedly flushed the DNS cache; DNS lookups work fine on the problem sites, but when I ping the given IP addresses I am getting some packet loss (not necessarily 100% loss). When I use a proxy, I can access the sites without any problem.

View 12 Replies View Related

How To Use Proxy Server

Mar 26, 2012

my internet connection has dynamic IP. So when I download some file from file sharing site, and if my internet connection breaks, my download can't resume from where it had stopped since my IP adress is changed.But if I stop the download manually (without breaking internet connection), as the IP address remains same, I can resume the download from that point. I mean can I use a proxy server so that everytime the download resumes, it reports a constant (static) IP to the website?

View 6 Replies View Related

AAA/Identity/Nac :: ASA Cut-through Proxy And ACS 5.3

Jul 16, 2012

I'm planning to migrate a customer from ACS 4.2 to ACS 5.3.
 
I have migrated the configuration for all the services but I'm thinking how to configure ASA 8.4 cut-through proxy service in TACACS+.
 
The same ASA uses TACACS+ for device mngt and RADIUS for vpn remote-access services.

View 1 Replies View Related

Cisco :: Authentication Proxy In ACS 4.0?

Feb 2, 2011

how can I config Auth-proxy In ACS 4.0 in ACS 3.3 we can Add this in the Interface , but I can't see any thing for Add Auth-proxy in This menu

View 2 Replies View Related

Cisco :: Use ASA Instead Of Proxy Server?

Sep 15, 2011

At the moment we have all our users going through a Proxy Server, Microsoft ISA but I want to know whether I could scrap this and utilise the ASA.

Would it be possible to create a Network Object with an IP range (Domain Users) and then have a list assigned to this of any Websites not permitted?

View 5 Replies View Related

Cisco :: Proxy Authentication On IOS?

May 20, 2011

Currently working on Proxy Authentication on a catalyst 3750GCisco's documentation says that I can customize my own web pages for the login, success, failure, and expire web pages. However, I am having a difficult time finding a template to build upon.

View 8 Replies View Related

Cisco :: ACL - Only Proxy Can Access To Web?

Apr 4, 2013

I have some problem to get working ACLs.The main purpose of this ACLs is to control what is going out from my network to internet .For example, i want that only my proxy can access to the web.

View 19 Replies View Related

Cannot Connect To Proxy Windows Xp?

May 4, 2011

I have a Dell Inspiron E1505, I am currently in France and trying to connect it the University's proxy server, and I have followed ALL instructions provided by the university as to how to go about doing this. Each time I enter the proxy address and everything and it doesn't pop up an error message or anything like that, it simply doesn't connect to the internet or give the opportunity to input my password and username.

View 1 Replies View Related

Can't Access Yahoo Without Proxy

Jun 4, 2011

i can't access yahoo without proxy.

View 1 Replies View Related

Servers :: Trace IP When Proxy Is Used?

Jun 17, 2011

how to trace IP when proxy is used.someone I know is playing a prank that might cause my marriage to break.That person uses proxy with many different IP and also a loopback. does anyone know how to trace the IP even with the above is used.

View 2 Replies View Related

Servers :: Cannot Connect Using Proxy Ip?

May 28, 2012

I have an issue here, I need to connect to various anonymus proxy servers, the ip's of which can be freely found on the web. I've tried doing this from a broadband connected computer and it's ok, but the thing is that when I try doing this from a computer that is tied to o router, it doesn't work at all.

View 3 Replies View Related

Internet Can't Connect Via Proxy?

Feb 17, 2011

my work is done,... and i dont know what i have to do...so i open the control panel > administrative tools and see all the content...click the service and see all the content and etc...nah,.... suddenly my Yahoo messanger disconnected...
i dont know why...i try to relog and can't connect...commonly, when i want to connect to the internet, the password for proxy windows is appear..but know it doesnt appear...

View 1 Replies View Related

How To Setup Proxy Server

Sep 23, 2011

How would I set up my own anonymous proxy server with my own ip address without having to go on a proxy list site? I don't care how complicated or time consuming it may be, I'm a very fast learner and I do things extremely quickly.

View 3 Replies View Related

Can't Run A Proxy In Google Chrome

Jun 1, 2012

I cant seem to run a proxy in google chrome when i try and run my ip hider program the internet just gets error?

View 1 Replies View Related

How To Remove Proxy Settings

Oct 20, 2012

how to connect proxy to my youtube.

View 1 Replies View Related

Firewall / Proxy For Static IP?

Jul 5, 2011

I have a server having windows server2003 os. I have configured my web application on this server which is accessible over internet using static ip. But I found that there is an risk of viruses on my server. Thats why now I want to configure this server behind the firewall/Proxy as well as dont want to share my static IP.Is there any way to keep server protected using firewall / Proxy application which is free. And also tell me how to nat the static ip.

View 4 Replies View Related

Can't Connect To SOCKS Proxy

Mar 23, 2012

I've been trying to use BTguard whith vuze but no matter what I try I keep getting this error.Connection Error (Socket Exception:Can't connect to SOCKS proxy:Connection refused : connect(t) I can't really tell where the problem is, with Vuze, Router, BTgaurd.I've been digging through old posts and Google for well over 4+ hours straight, haven't even got out of this chair yet trying to fix this.

View 3 Replies View Related

Anonymity Of VPN And Proxy Connection

Jun 6, 2012

I was recently trying to access , a free Japanese Internet radio service. It is region locked (ie. Japan only).I've used Japanese VPN and proxy to try and bypass the lock, but somehow it (the website) knows I'm based in UK (which is where I live). Even through VPN and proxies, is it possible to know where the IP is based?

View 2 Replies View Related

Bypass The Proxy Of School?

Jan 18, 2012

How can I bypass the proxy of my school? I cannot access my emails since I am in the UK and my email is provided with a server in China, namely 163.com; the email means a lot to me as it is the only way I can keep in touch with my friends from my old school.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved