I would like to connect devices to my network so that their traffic passes through a proxy running on my computer. I figured the best way to do this is by setting the proxy on my router to the one I am running, but then I would need to have another connection to the computer running the proxy or else there would be an infinite loop ?? something like that. so:
Internet -> router (1) -> my proxy on comp A -> router (2) -> computer B
I am using a USB Modem from HUAWEI Technologies to use internet when im not on a wifi zone.. The Internet Speed is kinda slow (512 kbps), so I configured my browser to go through a proxy to make it a lil bit faster (2mbps now)..Everything works fine except that I couldn't connect to https sites (gmail, facebook, eBay, etc)
Yesterday when I got home from college my computer randomly could not connect properly to my wireless modem. It tells me the SSID etc but when I connect to it, it becomes an unidentified network and has no internet connectivity. This problem only occurs on my laptop via wifi, wifi still works fine on other computers and my phone so I assume it is a problem on my laptops end. Also my laptop can connect to other wireless networks, ie my schools public network, and they work fine. I'm running windows 7 home premium.
So we purchased a Samsung PN64D8000 television for our company. The TV is "internet-ready", provided you don't use a proxy as a security measure.I phoned Samsung, scoured the web and confirmed that there is no way to specify the use of a proxy server and port on this television.Or... is my fear correct that proxy's can only be configured on the end device using the internet connection.
I have two computers (192.168.1.101 and 192.168.1.102) connected to a TP-Link TD-W8960N (192.168.1.1).I have the following softwares:[URL]However "Freegate" is a proxy software, but it still has some restrictions on particular websites, so I planned to bypass this limitation like this:
1. I ran the Freegate on 192.168.1.102 and then opened CCProxy and then I used Proxifer to set all data transmissions of CCproxy through Freegate by setting a rule in Proxifer. I put IP: 127.0.0.1 Port: 8580 Protocol: HTTP in Proxifier.
2. I ran Proxifier on 192.168.1.101 and set the IP: 192.168.1.102 Port: 808 Protocol: HTTPS as the proxy setting in it.I checked the internet and the configuration was successful. It seemed like I had directly run Freegate on this computer and since I tested those particular websites and they were blocked by Freegate servers, so everything was correct.
3. Now I managed to set a chain proxy configuration in Proxifier in 101 so I could bypass the Freegate limitation. I went to Free Proxy List - Public Proxy Servers (IP PORT) - Hide My ***! and picked some free SOCKS5 and HTTPS proxies. I tested them individually to see if they were working properly and they were. Then I set the chain proxy like this:
192.168.1.102:808 (HTTPS) IP:Port (HTTPS/SOCKS5)
It didn't work... I received "connection closed unexpectedly" in Proxifier on 101 and "IP (the IP I picked up from hidemyass) : Client requested HTTPS connection. use separate HTTP connection for this." on 102.
1. I also tried Port Forwarding on my router and it didn't work either.
2. I couldn't connect CCProxy to Freegate via other protocols in Proxifier rather than HTTP. When testing I got the error that Freegate doesn't support SSH protocol. This most likely means that there is no built-in interface in Freegate to allow other softwares to connect to it via other protocols rather than HTTP.
3. I used port scanner to see if any other ports were open on 127.0.0.1 so I could use another protocol, and nope there wasn't any rather than 8580 : HTTP.
I am attempting to set up a proxy on a home network that is used for business purposes. I am not at all a networking person, I know enough to be dangerous. If I follow the steps listed here: URL Will this encrypt the data that is sent to the internet from any computer that connects to my network or just the one I follow the steps on?
I have a Dell Dimension 5000 and I want to transfer the computer to connect via wireless. I have bought a wireless dongle installed all the sot wear but my computer will still not connect to the modem in my house. Is this particular model able to connect via wireless. Or do I need to install more software.
how to connect a adsl modem to a computer network using a switch with a server.I have a network with a server and about ten clients computers all connected through a switch, the server has an IP 192.168.1.1 as its gateway. I want to connect adsl modem to the switch so that all the computers can have access to the net, but the adsl too has 192.168.1.1 as its IP.
I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI: VCI: These 2 already came with presets. Should I just leave them? Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
I can't get traditional broadband services, so I've been making due with Verizon's Mobile Broadband service. Problem is, it's expensive and has a 5GB cap per month. I read about powerline networking and thought it sounded good, so I bought all the adapters and a router. Problem is, I didn't have the prior knowledge to realize I also needed a modem as well. How or if I'd be able to set up any sort of modem in my home, considering services like Verizon can't reach me?
cable company connected cable modem to computer, and left us to do the wireless set-up. during this process, we had to disconnect the ethernet cords and reconnect at correct locations. Now, no internet period. The cable modem is not showing a send signal
I have built my own computer and have almost finished with everything, but I am unsure as to how to set up the wireless capabilities for it. I am submitting this thread on the computer itself, but am using an ethernet cord to connect to the internet. I don't know if I need to download and install a different driver or if there is a simple way to just change some settings in the control panel. I am using windows 7 64 bit. The networking hardware is a realtek 8111f Gigabit LAN controller
I have a new Dell Inspiron 14Z (purchased in February), it has been running great until recently, the internet connection (wireless) completely stopped working.When I try to connect through Internet Explorer, it says Internet Explorer cannot display the webpage. I Diagnose Connection Problems, and this is what I get:"Windows could not automatically detect this network's proxy settings." On Chrome, I got a long list of things to do (check DNS settings, LAN Network, etc. have tried every and all checked/unchecked box they advise.) This error shows up:Error 105 (net:: ERR_NAME_NOT_RESOLVED): The server could not be found. However, I accidentally uninstalled Chrome trying to fix this problem, so Internet Explorer is all I have.It's been about 2-3 weeks with no internet. Have tried connecting to 5+ different networks (Home- AT&T U-verse, University of Texas Network, restaurants, etc)tried restarting my computer, setting my LAN settings back to normal, and it still won't work. Other computers work on all of the networks I've tried, it's just mine that wont. [code]
I recently purchased an EA6500 router to replace the crappy Westell 7550 AT&T provided me with. The 7550 was easily hooked up with two cords: the Ethernet cord into the computer and the Internet/data cable hooked into the DSL filter. I thought the EA6500 would have an easy installation, but it has not gone so smoothly. I hypothesize it's one of two problems - either the Internet/data cable is incompatible with the EA6500 (the cable works; I've re-tested it on the 7550), or it is because all instructions mention plugging the Internet/data cable into a modem's port while I do not have a modem. My Internet comes from a DSL filter attached to a telephone jack in the wall.
my computer randomly disconnects from my modem and will not reconnect until I restart my computer (do not need to restart modem). When I check the modem, it always is still running. The lights on the modem do the exact same thing whether the internet is working or not. The disconnection is entirely random. Sometimes it will disconnect immediately, sometimes it will take up to a few hours. I do not have a router hooked up to the modem, and the only other thing the modem is hooked up to is our tv. But even when the tv box is off, we still randomly disconnect.
On the previous forum thread that I read, some of the comments asked for the person to paste their entire ipconfig and their entire ping list from command prompt I will post that below: [code] Could it possibly be a virus? I am currently performing a virus scan using Microsoft Security Essentials. I will report the results of that tomorrow, seeing that it will take several (up to 10) hours to finish and it is nearly midnight of me posting this.I should also note that whenever I unplug my Ethernet cord it gives me a symbol that looks like this other than the regular disconnect with the red "X" over the wire symbol.
I am using wag120n modem router but is confused abt how to setup it's wireless security.The wireless securit setting recommended in tutorial given here is very different from what is given in my routrs setting up page.
I don't know how to handle the key renewal option.If i leave it as 3600 seconds does that mean i have to enter a new key in my wireless device connected to the router after every 1 hour?
One of the schools whose networks I administer has a peer to peer network running about 30 xp machines. DHCP is achieved and DNS settings distributed via a basic Linksys router; is there any way of distributing proxy server address and port short of entering manually in LAN settings of IE on every terminal - there is no budget to install a server.
My son has a modem that can be wireless or cable. He mostly uses it via cable, but can I set up my wireless computer to use the modem at same time or would he need to have the modem set to wireless? Failing that, could I set up a second modem as a wireless one just for me?
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
Few days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
I access the internet from my company�s LAN, which has a restrictive firewall, so I cannot request the admin to open any ports manually for me. Hence I use a software called your-freedom. This proxy software supports both http as well as socks 4 and 5 proxy (by entering the proxy IP 127.0.0.1 (localhost) and Port 8080 for http proxy OR 1080 for Socks Proxy), and I have successfully been using web browsers and some other softwares that support proxy/ allow proxy info to be entered to login/ connect to the internet. Your-Freedom also supports port forwarding.However, the softwares I intend to use do not have any options to enter proxy methods or proxy ports (as far as I have noticed). I have tried to proxify these 2 softwares using softwares such as SocksCap and Free Cap, but either they don�t work, or my settings in proxifying are not correct. I believe I will have to do port forwarding or proxify the softwares, but have been unable to do so in the correct manner.
Following is the info on the 2 softwares:
1.NOW Trading terminal:[FONT=Times New Roman]Normally when I start the NOW or Zerodha software, the software starts and I get a login screen, but under firewall conditions, I get the initial Splash screen but then the software stops with the error: [b][u]NOW Initialisation failed for Interactive Engine << os error>>.
2.PowerIndia Bulls:The software is written in Java and starts with a batch file (PowerIndiabulls.bat) located in C:UsersDEFAULT_USERNAMEAppD..... I converted this batch file to .exe (with battoexe software) and then ran it through a proxifying software. The .exe start properly without proxifying software but not under proxifying environment. Basically the software needs to connect to the internet using Port 443. I am also expected to keep ports 443, 41599 and 59598 open. software's requirement is available at Indiabulls Securities: Indiabulls Securities is a leading capital market company offering securities broking and advisory services, depository services, equity research services to its clients in India. (item no. 5).To confirm, while the software is unable to connect through port 443, you will get an error message: "Connection to Login Server could not be established" when you try to login with any random Username and Password.To know that the software is able to connect properly, you will get an error: "This User ID is not enabled to be used with this product".
I have read many guides about how to forwarding some port in routers, and i did exactly the same as tutorial,after trying many time i just noticed there is something wrong with my router well here the informations.my router model/name UTStarcom AR7RD im using Windows xp SP3 86x my firewall is disable (But i already added the ports i need to open in my firewall)my Upnp are disable in my router well my computer takes a ip from ISP soo i dont need static IP there is no option that let me delete the old useless ports,i searched almost all the sections of my router and i failed to find a thing that let me delete some port.i went to DMZ setting to Active it cuz its the last thing for me to able open some port, i went to DMZ SETTING and tried to enable the check mark for this section i noticed it wont enable, i got no error there just it wont be enable.im watching around its 2 weeks i search any where in different forums and googles.
I have a modem/router at one end of my house, but the WiFi doesn't reach the other end of the house (where I have my other PC). If I bought a second modem/router and plugged it in next to my computer, would that work?and if so, would I have to turn one modem off to use the other?
I have a Dell Inspiron E1505, I am currently in France and trying to connect it the University's proxy server, and I have followed ALL instructions provided by the university as to how to go about doing this. Each time I enter the proxy address and everything and it doesn't pop up an error message or anything like that, it simply doesn't connect to the internet or give the opportunity to input my password and username.
I have an issue here, I need to connect to various anonymus proxy servers, the ip's of which can be freely found on the web. I've tried doing this from a broadband connected computer and it's ok, but the thing is that when I try doing this from a computer that is tied to o router, it doesn't work at all.