Linksys Wireless Router :: Setting Up EA6500 Without A Modem?
Apr 8, 2013
I recently purchased an EA6500 router to replace the crappy Westell 7550 AT&T provided me with. The 7550 was easily hooked up with two cords: the Ethernet cord into the computer and the Internet/data cable hooked into the DSL filter. I thought the EA6500 would have an easy installation, but it has not gone so smoothly. I hypothesize it's one of two problems - either the Internet/data cable is incompatible with the EA6500 (the cable works; I've re-tested it on the 7550), or it is because all instructions mention plugging the Internet/data cable into a modem's port while I do not have a modem. My Internet comes from a DSL filter attached to a telephone jack in the wall.
View 1 Replies
ADVERTISEMENT
Dec 23, 2012
I would like to know how to setup QOS on the linksys EA6500 wireless router. I know about the media prioritization settings, however, thats not enough for me. I would like to setup upload and download speed limits for certain devices on my network, like, say 300kbps download for a certain device at all times.
View 3 Replies
View Related
Dec 29, 2012
I bought the EA6500 yesterday and tried setting it up with the CD that came with it and it tells me ( YOUR COMPUTER DOES NOT HAVE NETWORKING CAPABILITY ) and will not install. I have the capability for networking because I have a network. I was able to set the router up but not with the software on the CD. I have tried a number of times and still get the same message and when I click on view details this is what I get .I have a network adapter and it works just fine.
View 9 Replies
View Related
Jan 29, 2013
I have an EA6500 which obviously has 4 Gigabit ethernet ports for my home network, but I need a DSL modem to get it working.What's the maximum speed current modems can supply from the Internet to my router, is there such a thing as a Gigabit capable DSL modem these days or am I dreaming ? Is it possible to even get Gigabit dowload speeds via DSL or would I have to go cable to achieve something like that ?My main concern is I don't want to buy a modem that will slow down or 'throttle' the capabilities of the new router I've just purchased or have I got the wrong idea ?
View 7 Replies
View Related
Jan 26, 2013
I just installed my new EA6500 and everything works ok I think, Netflix across my PS3 is ok, laptop connects, and smartphones connect. The problem is that my Internet connection to my desktop (wired) PC is slow as mud. My ISP is a fiber optic provider and although I'm not sure exactly what my connection speeds are my Internet connection has always been blistering fast. With everything other than two smartphones turned off my desktops Internet access is slow. How to get my speed back and still use my new router?
View 2 Replies
View Related
Nov 28, 2012
192.168.100.1 is how I access my modem using the 4100, but since buying EA6500 I can no longer find the config screen. connect to there modem from the EA6500?
View 7 Replies
View Related
Sep 26, 2012
Attempting to get EA6500 working with TWC Motorola Surfboard SBV5220 modem, which has been working just fine for the last 2 years with a Linksys E3000 router. DHCP client in the EA6500 either doesn't ask for an IP address from the cable modem or the modem just isn't supplying one. With the E3000, you could see the IP address assigned by the cable modem and the primary and secondary DNS server addresses provided, and if the DHCP request didn't work, these addresses would be all zeroes. But, with the EA6500, I can't find an equivalent screen that shows these assignments, or zeroes when the DHCP request fails.
View 1 Replies
View Related
Apr 5, 2013
I cannot access my Motorola SB6141 cable modem status page at 192.168.100.1 thru the EA6500 router. I can bypass the router and can connect to the status page with no problem. Is there a setting to change or can I possibly do port forwarding to access it?
View 9 Replies
View Related
Mar 8, 2013
I have rather huge connection at home. DL speed 80Mb, UL speed 3Mb.When I connect my PC directly to modem and configure PPPoE connection, I get 81Mbits/sec. When I connect my old ASMAX $30 router, I get 78 Mbit/sek. And I find it OK.But when I connect my EA6500 I get 28 MBits/sec. Same result on wire as on wireless connection. Of course If I enable prioritisation, I get even less, 12-15 Mbits/sec.I tried already even configuration with ASMAX as wired router and EA6500 connected to its LAN port. It gives me 50Mbits/sec.
View 5 Replies
View Related
Jan 14, 2012
I am using wag120n modem router but is confused abt how to setup it's wireless security.The wireless securit setting recommended in tutorial given here is very different from what is given in my routrs setting up page.
I don't know how to handle the key renewal option.If i leave it as 3600 seconds does that mean i have to enter a new key in my wireless device connected to the router after every 1 hour?
View 2 Replies
View Related
Jan 15, 2013
Setting up a linksys router with dsl Modem.laptop direct to modem works router connected dhcp to laptop Eth. port 1 OK router to modem dhcp does not generate DNS but appears to give IP address. Result: can't connect to internet / diagnosis says cannot resolve ( google.com or yahoo.com etc.)
View 2 Replies
View Related
Feb 28, 2013
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
View 1 Replies
View Related
May 1, 2012
I have a CLEAR modem want to know how to setup my Belkin router so I surf the internet for my laptop and tablet pc. The subsection is the router.
View 1 Replies
View Related
Jan 2, 2013
Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP : Streamyx
In the process of Lan setting my new wireless adsl modem router TD-W8968, an error message shown when I press save. Error Code: 1, Internal error.
View 2 Replies
View Related
Dec 13, 2012
provide me with the latest (or one) release of 1.1.27 firmware for the EA6500. I am deeply disappointed in the last firmware upgrade and due to security and sudden lack of certain, or let's say all, functionality in bridge mode I need to downgrade or wait for an upgrade where that's fixed, but most likely not soon, or ever. Where could I find the firmware downgrade.
View 2 Replies
View Related
Dec 14, 2012
I use EA6500 I Don't find WOL OTL..
View 1 Replies
View Related
Nov 3, 2012
I was wondering if it's possible to use two EA6500 in the same network, one as main router and the other as anacess point?
View 2 Replies
View Related
Dec 30, 2012
Looking to upgrade my old G router to the EA6500. I don't see anything about VPN pass through on the EA6500 or any linksys N router. Is this feature something they no longer include?
View 3 Replies
View Related
Dec 29, 2012
I would like to use the EA6500 in my network - but nor as primary router (or in fact routing at all). I would have thought, one could simply tell the device to use a particular gateway, but it does not seem to be easy. I have used many other home routers as combined switch/AP/USB-drive (latest a D-Link DIR-655), but the EA6500 seems very picky. The "easy" "Smart Wi-Fi" setup requires internet access through the WAN port - and that divides my home network, which then have two zones which cannot really "talk" to each other. Alternatively, I can reset the device and access it directly on the IP (initially 192.168.1.1). But then I can change only LAN and WLAN settings. Stuff like Guest Access, USB-devices etc. won't work. Do anybody have success with this device without using the WAN port and the DHCP server?
View 8 Replies
View Related
Nov 13, 2012
I have a new EA6500 and am failing at getting ftp to work. I have updated the firmware.My ftp folder is on a Seagate USB Go-Flex drive attached directly to the router via USB. I have set up shares which I can see and access via my computer which is attached to the router.FTP is configured to use port 21 and UTF-8.
View 9 Replies
View Related
Nov 20, 2012
I have a pair EA4500s that I am swapping out for a pair of EA6500s. One EA6500 is a router. The 2nd EA6500 is set as a bridge and us being used as an Access Point about 200ft and two floors above the main EA6500 router. The two units are connected via DECA (200MB Ethernet over DirecTV cable - an alternative for others with a cable provider is called MOCA). So, basically two EA6500s serving as two Access Points on opposite sides of the house and all wireless networks on different channels but all sharing the same SSID. Everything works GREAT except for one unusual issue.
The issue is with wired or wireless clients. If I try to use my PUBLIC address with port number to address a local client on the local network inside the NAT network the NAT redirection fails. In other words if I use 172.16.16.8 for a local web cam while inside my network from an iPhone or PC all works great. If I use the external public address, however, the connection times out. If I pop out the EA6500 doing the routing/NAt and swap it with the old EA4500 with basically the same config as the EA6500 everything works again. The EA6500 and the EA4500 are configured identical for the most part and with the EA4500 as the main router NAT redirection works great but with the EA6500 NAT redirection fails. I have the firewall setting to FILTER NAT REDIRECTION unchecked so that's not the problem.
Seems very odd.... and only seems to happen with the EA6500..... the work around is to use the local IP address when the client is on the inside and the public address when on the outside, but what a pain that is....
View 9 Replies
View Related
Oct 9, 2012
Any work around to enable reverse NAT or similar functionality on the EA6500? I recently upgraded from a Dlink that did support reverse NAT to my internal devices through a dynamic dns service. Now I have to know the IP address for all the devices.
View 1 Replies
View Related
Nov 27, 2012
i setup my new EA6500 with the ethernet cable from my cable modem plugged into the EA6500, but with my old E4200 still switched on, but disconnected, i seemed to have ended up with a ip address of 10.250.27.47, not the 192.168.1.1 i was expecting, which i had with the E4200, my question is, is 10.250.27.47 something i should expect with the EA6500, or do i need to do a factory reset on the EA6500 and start again with everything else switched off as a precaution ?
View 6 Replies
View Related
Oct 30, 2012
I set up EA6500. All kinds of problems with anything on the 2.4 MHz band. My wireless desktop on the 5.0 MHz band was flawless. So I ran Xirrus Wi-Fi Inspector (freeware). The router is transmitting two 2.4 MHz signals! One is the SSID I set up and named. The other one is identical in every way except that the BSSID is slightly different. It is a non-broadcasted SSID that shows up on every device as "Other Network." I was on the phone with Cisco Support tonite, and they were great as usual but had no answer. If you change the channel on the 2.4 MHz band, the shadow network also changes to the same channel (this blew the Tech's mind). We reset the router to factory settings and started over. They are calling me back tomorrow. This router has great features on paper, but so far, it has not delivered.
View 5 Replies
View Related
Oct 2, 2012
The only way I could get my EA6500 to work as auto DHCP to my Roadrunner Motorola SBV5220 Surfboard cable modem was to disable IPv6 support on the router. It appears that the EA6500 attempts to issue the DHCP request for address assignment from the modem using IPv6. I could see the status of "Connecting" for IPv6 in the Diagnosis Reports and it would hang. Once I disabled IPv6, the modem assigned an IPv4 address and everything worked fine. However, am I giving up any functionality by having to do this? I bought this router and the WUMC710 Universal Media Connector for the 5GHz connectivity for streaming and just wondered if I'm impacting UMC performance or any other functions of the router by having to disable IPv6.
View 1 Replies
View Related
Jan 23, 2013
I currently have my EA6500 behind verizon fios router. I have 5 static IP addresses assigned to FIOS router, however the machines I want to connect to are behing EA6500. It's a dual NAT scenario:
Public IP - FIOS Router - 192.168.1.0/24 network - EA6500 - 192.168.2.0/24 network
What I would like to do is for each public IP address, I would like to forward traffic to a particular host on 192.168.2.0 network. I can easily configure FIOS router for static NAT and assign one internal IP (from 192.168.1.0 range) for each public IP. However, I don't see a way to assign multiple IPs from 192.168.1.0 network to EA6500 internet interface.
I don't want to use EA6500 as a bridge as it will pretty much reduce my EA6500 to a very expensive GigE switch.
Is this possible? Or should I replace it with something more useful like a business router? This is for my home so I would like to avoid buying an expensive business router.
View 1 Replies
View Related
Mar 4, 2013
I am interested in running the EA6500 without all the Cloud Connect software etc. Is this possible? Is there a basic way to set this up without that requirement?
View 1 Replies
View Related
Apr 13, 2013
I just bought the EA6500 last week. Had to RMA it on Monday and got the new one today. The issue still persists. The power light is constantly blinking and my computer is unable to obtain an IP address from it. I contacted tech support and was unable to get the issue resolved so I had it exchanged believing it was defective. The new one does the same thing. When I connect my computer to it, the light on my Ethernet port stays a solid orange instead of green like it does for my usual router. The Cisco light is constantly blinking.
View 9 Replies
View Related
Mar 8, 2013
I have two USB drives connected to my EA6500. When I use the ip to connect to them everything works just fine, but I cant map the drives. If I access map drives, I cant do anything with the files. It looses connection all the time.
View 2 Replies
View Related
Feb 2, 2013
I've noticed that my pings on all my devices go up when I enable QOS.This even happens on the PC which has high priority.The ping times go up by an average of 6ms, so if I normally have a 14 ping to a host it will now be 21.I've tested this by turning media prioritization on and off and everytime its turned on this seems to happen, although sometimes it requires a router or pc reboot before the issue arrises.
View 8 Replies
View Related
Apr 1, 2013
I have it set up as Capri (2.4 GHz) and CapriHD (5 GHz). CapriHD was intended only for HD video traffic. My wife's iphone 4S can only use 2.4 GHz, and it suddenly quit connecting after 1-2 months of use. My iphone 5 can use either band and it can only connect on 5 GHz. This problem MIGHT correspond to the recent firmware upgrade? I was traveling a lot around that time so can't be sure that is a culprit.Really thought the problem was the hardware, so I replaced it with a new EA6500 and getting the same result.
View 2 Replies
View Related
Mar 2, 2013
Can the EA6500 be set up as an access point connected to a remote router which has a connection to the DSL modem?I want to replace one of my wireless access points with a faster wireless interface, but this will be connected via hard wire CAT-5 cable located away from my modem/router.
View 3 Replies
View Related
Oct 5, 2012
linksys ea4500 vs the linksys ea6500? is there any real difference?
View 2 Replies
View Related
