Using Bandwidth Of Multiple Users On A Proxy Network?
Jan 22, 2011
My college hostel has a broadband connection in each room, with individual servers, all of which are connected to a central server.Each hostel has a unique ip range(eg 10.3.14.1-10.3.14.255, and others like this, and students are allotted random ips). Each hostel has a particular proxy address that allows us to access the internand by low i mean, quite lowet, and each user has a fixed bandwidth(which is low). My question is, is there a way for one user of a particular hostel to use the bandwidth of multiple users of the same hostel(such that they are in the same ip range, and have the same proxy server for accessing the internet).i.e Is there a way for me to increase my bandwidth by using the bandwidths of other non allocated ips within the range of my hostel, such that with a single broadband connection, i can utilize the the unallocated bandwidth.
View 1 Replies
ADVERTISEMENT
Aug 13, 2012
I've got the E2000 at home for our private network.
We are three guys sharing a flat. We have personal laptops, work laptops, mobile phones, games consoles, tablets etc that connect to the internet.
Problem is that when someone downloads stuff, the speed is slow for the rest of us. So i was hoping i could set up something like three "channels" so each of us could have the same download speed, ie 1 mbs each regardless if others are using the network at the same time. And then maybe a guest network for all the mobiles and tablets etc. MAC filtering for access for our personal laptops should work.
We have a 20mbit cable network line.
Can i do all of this on the E2000 and how?
View 5 Replies
View Related
Aug 12, 2011
how to limit the bandwidth in digicom router?
View 2 Replies
View Related
Aug 20, 2012
I run a business and have customers who would like to use my wireless internet. I previously had a completely open network that I would allow them to use, until someone illegally downloaded a movie and got us in trouble. I would like to allow use of the network again, but limit activities like this. Basically, so they could only do basic web browsing, etc.
View 1 Replies
View Related
Nov 17, 2012
I am using ASA Version 8.2(1) , I want to limit the vpn users to use less bandwidth of my Interlink to access something on inside network
example : source vpn pool
Destn : inside network
how can achive this with QOS config.
View 2 Replies
View Related
Oct 12, 2011
i have tenda ADSL router using the internet of Nepal Telecom, Nepal and distributed to two users. now i want to limit the speed of the other user to least and i want to achive maximum speed of the subscription but have no idea to manage it
View 1 Replies
View Related
Apr 17, 2011
Im using AIR-LAP1142N-N-K9 access points (it supports b/g/n). Somestimes the AP has up to 80 users connect to it.SOme recommends the AP should have between 25-35 users max.Any one know the recommend maximum number of users connect to a AP? And how can you tell the traffic going through the AP is congested?
View 1 Replies
View Related
Mar 25, 2011
If there is something that cant control the bandwidth of our internet.
The problem is that one person is constantly hogging our internet by downloading and such and making it impossible to play games.
So is there anything that can make it so he cant use that much bandwidth so we can play without constant lag?
View 2 Replies
View Related
May 14, 2013
I have a 2504 Controller (os version 7.0)with 7 access poins attached and with 2 vlans. one for regular users and another for gues users.
View 10 Replies
View Related
Sep 20, 2012
I would like to know about asa 5500-x. Does it supports application visibility and granular control for different applications. Moreover bandwidth control based on different users and different applications
View 1 Replies
View Related
Jul 19, 2012
I used the following commands to limit users on my wireless network (WLC 5500) and a Nexus 7000. The previous cisco doc only covers the 6500 and some commands have changed. Tested and working except the PIR gives an error, post up if you know why, otherwise enjoy!
Note Wireless Network assumed to be 172.21.0.0/16.Note This will limit each wireless user to 1 MbpsNote The PIR (Peak Infomation rate, also know as burst) is ignored in following commands, unknown at this time why.Create ACLs:
ip access-list acl-wireless-downstream 10 permit ip any 172.21.0.0/16 ip access-list acl-wireless-upstream 10 permit ip 172.21.0.0/16 any class-map type qos match-all class-wireless-upstream match access-group name acl-wireless-upstreamclass-map type qos match-all class-wireless-downstream match access-group name acl-wireless-downstreampolicy-map type qos police-wireless-upstream class class-wireless-upstream police cir 1 mbps bc 200 ms pir 1536 kbps be 200 ms conform transmit exceed drop violate droppolicy-map type qos police-wireless-downstream class class-wireless-downstream police cir 1 mbps bc 200 ms pir 1536 kbps be 200 ms conform transmit exceed drop violate drop
1.Apply police-wireless-upstream on the incoming port from the controller.
interface port-channel130 description *** LAG for WLC1 *** switchport mode trunk switchport trunk allowed vlan 80,130,255,600 service-policy type qos input police-wireless-upstream
2.Apply policy-wireless-downstream on the uplink LAN/WAN ports.
interface port-channel101 description *** L3 Port Channel to Core VDC *** no switchport service-policy type qos input police-wireless-downstream ip address 10.70.10.18/30 ip router eigrp 10
View 5 Replies
View Related
Nov 6, 2011
I heard there was this router that does not make other user slow their internet even if there are multiple users.
View 5 Replies
View Related
Oct 16, 2011
I live in a house with 5 other students. To be fair, it is in the middle of nowhere so the internet is probably very slow anyway, but here is my problem: Skype is so slow I can only just make a voice call, webcam chat is off the cards. YouTube and other videos are so slow to load I cannot watch them. My Xbox 360 constantly disconnects from the wireless, so I cannot play online.
View 6 Replies
View Related
Jul 27, 2011
Is it possible to increase bandwidth througput on 2951 router if you have 3 WAN connections from different ISP, lets say 12Mbps + 24Mbps + 8Mbps, so will I get 44Mbps internet connection in total?Also, on 887G router, if I use DSL 12Mbps broadband, can I use 3G internet connection constantly, not for backup only. And will I get the total bandwidth output as a sum of two connections?
View 5 Replies
View Related
Nov 29, 2011
I have a WRT160NV3. When more than 1 member of the family is using a device it gets really slow. For example, we have 3 laptops and a PS3. When the PS3 is being used for online play and someone gets online to watch videos, etc it is extremely slow. Is there an update to the router or do I need to upgrade?
View 9 Replies
View Related
Sep 16, 2012
I have an ASA which is managing internet access from mutiple VLANs configured on a 3560 switch. I want to be able to limit the 100MB internet connection on the ASA on a per subnet (VLAN) basis for the multiple subnets configured on the switch..
so for example
VLAN10 - 10.0.10.0 - limit to 5MB
VLAN20 - 10.0.20.0 - limit to 10MB
VLAN30 - 10.0.30.0 - limit to 3MB
View 7 Replies
View Related
Oct 9, 2012
As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected. I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up. I have upgraded the firmware so that is up to date. We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
I am using DHCP Configuration. My Channel Width is set to 20 MHz and I am using Channel 11. The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might work and so far it doesn't seem to have done anything. I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304. Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well. I've tried everything that I could think of including reconfiguring my router and restarting my modem as well.
View 6 Replies
View Related
May 28, 2012
I would like to connect devices to my network so that their traffic passes through a proxy running on my computer. I figured the best way to do this is by setting the proxy on my router to the one I am running, but then I would need to have another connection to the computer running the proxy or else there would be an infinite loop ?? something like that. so:
Internet -> router (1) -> my proxy on comp A -> router (2) -> computer B
View 1 Replies
View Related
Mar 31, 2012
I access the internet from my company�s LAN, which has a restrictive firewall, so I cannot request the admin to open any ports manually for me. Hence I use a software called your-freedom. This proxy software supports both http as well as socks 4 and 5 proxy (by entering the proxy IP 127.0.0.1 (localhost) and Port 8080 for http proxy OR 1080 for Socks Proxy), and I have successfully been using web browsers and some other softwares that support proxy/ allow proxy info to be entered to login/ connect to the internet. Your-Freedom also supports port forwarding.However, the softwares I intend to use do not have any options to enter proxy methods or proxy ports (as far as I have noticed). I have tried to proxify these 2 softwares using softwares such as SocksCap and Free Cap, but either they don�t work, or my settings in proxifying are not correct. I believe I will have to do port forwarding or proxify the softwares, but have been unable to do so in the correct manner.
Following is the info on the 2 softwares:
1.NOW Trading terminal:[FONT=Times New Roman]Normally when I start the NOW or Zerodha software, the software starts and I get a login screen, but under firewall conditions, I get the initial Splash screen but then the software stops with the error: [b][u]NOW Initialisation failed for Interactive Engine << os error>>.
2.PowerIndia Bulls:The software is written in Java and starts with a batch file (PowerIndiabulls.bat) located in C:UsersDEFAULT_USERNAMEAppD..... I converted this batch file to .exe (with battoexe software) and then ran it through a proxifying software. The .exe start properly without proxifying software but not under proxifying environment. Basically the software needs to connect to the internet using Port 443. I am also expected to keep ports 443, 41599 and 59598 open. software's requirement is available at Indiabulls Securities: Indiabulls Securities is a leading capital market company offering securities broking and advisory services, depository services, equity research services to its clients in India. (item no. 5).To confirm, while the software is unable to connect through port 443, you will get an error message: "Connection to Login Server could not be established" when you try to login with any random Username and Password.To know that the software is able to connect properly, you will get an error: "This User ID is not enabled to be used with this product".
View 1 Replies
View Related
Apr 5, 2012
in our office private network we are using a proxy server for internet connection sharing, we are unable to make voip calls through this proxy server?
View 1 Replies
View Related
Jan 8, 2013
Anyone know the differnce between these two on a MLS? Seems that proxy arp as I know it works with or without the 'local' version.
View 7 Replies
View Related
Aug 21, 2011
I am behind a SQUID proxy.I need to set proxy settings for cmd.I'm using win7 so proxycfg cannot be used.I used netsh like this: netsh winhttp import proxy source=ie
Internet explorer had my proxy settings already.Now the problem my proxy requires username/password authentication.I do not know how to set the username and password in command prompt.
View 1 Replies
View Related
Mar 4, 2011
I just switched schools and I work for HP's marketing team part time which entitles me to get on some websites blocked by our school's network (sonicwall block).I then tried a proxy on Firefox and it was blocked as the sonicwall detected that I was using a proxy. Why did this happen and is there a way to bypass?This is mainly on wired connection as the Ethernet isn't god awfully slow like wireless is.
View 1 Replies
View Related
Jun 11, 2012
I have a new Dell Inspiron 14Z (purchased in February), it has been running great until recently, the internet connection (wireless) completely stopped working.When I try to connect through Internet Explorer, it says Internet Explorer cannot display the webpage. I Diagnose Connection Problems, and this is what I get:"Windows could not automatically detect this network's proxy settings." On Chrome, I got a long list of things to do (check DNS settings, LAN Network, etc. have tried every and all checked/unchecked box they advise.) This error shows up:Error 105 (net:: ERR_NAME_NOT_RESOLVED): The server could not be found. However, I accidentally uninstalled Chrome trying to fix this problem, so Internet Explorer is all I have.It's been about 2-3 weeks with no internet. Have tried connecting to 5+ different networks (Home- AT&T U-verse, University of Texas Network, restaurants, etc)tried restarting my computer, setting my LAN settings back to normal, and it still won't work. Other computers work on all of the networks I've tried, it's just mine that wont. [code]
View 13 Replies
View Related
Aug 23, 2012
When I'm at work, I have internet (though a proxy) and remote access to the linux computers at work (the work laptop runs win 7)when I have to work at home, the work VPN that we were given has no internet access but I can connect to the remote linux computer that I need just fine. the linux computer has no internet access and more often than not is missing modules and dependencies. Is there a way to enable my home wifi network and the VPN so that the work computer can access the internet locally while I'm working? just one browser is all I need.... I currently have to disable the vpn, download my modules and then connect, to install them.
View 5 Replies
View Related
Feb 6, 2012
I have a wireless router and own net work at my office I would like to be able to set up a proxy server in order to prevent certain users from reaching specific sites.
View 1 Replies
View Related
Feb 24, 2011
Why would someone bother with VPN which is difficult to set up (I am told) when I can use a web based proxy many of which offer an ssl option?
View 5 Replies
View Related
Jun 23, 2011
For my office i want to share my internet connection using proxy and i also want to restrict the websites.
View 4 Replies
View Related
Nov 26, 2011
I am running Windows 7 and I use a ZyXEL ZyAIR G-220 Wireless USB adapter for internet. I had a virus called something like Cloud AV 2012 so I used Malware Bytes to remove it and it worked just fine. However, now the internet does not seem to work (there's that yellow triangle with the exclamation point) and when I try to run diagnostics, the message "Windows could not automatically detect this network's proxy settings" comes up. So far, I've tried rebooting, disabling proxies in all of my browsers, and running scans, And I also cannot system restore, because apparently windows security was turned off and there are no restore points
View 1 Replies
View Related
Oct 20, 2011
I'm on windows 7 btw.When I diagnose the problem it says: Windows could not automatically detect this networks proxy settings I'm connected to the internet via cable on my laptop. Yes I'm using a router. The other computers connected to the router can connect to the internet but mine can't. It also says "unidentified network - no internet access" when I click on the computer icon in the bottom right corner of the screen. until I downloaded from a music site which gave me the virus I think. Now, I'm not certain if the virus is removed or not. I tried system restore point but it won't even let me restore my computer anymore for some reason, maybe because of the virus.
View 19 Replies
View Related
Jan 5, 2013
I'm using my old laptop now. On my regular laptop, my internet icon has the yellow triangle and when I trouble shoot it, the message says "Windows could not automatically detect this network's proxy settings".Recently I noticed my computer was heating faster (and hotter) than usual so I ran a search again and it said no threats were found. I have ran the search twice since then and still nothing. I was advised to use ccleaner,malwarebytes, and Super Anti-Spyware. It removed one other threat but the problem was still there. I then started using combofix, but I did not like the look of it so I stopped that scan. It seemed a little sketchy. As of this morning, I'm having the internet problem. My old laptop (the one I'm on now) and my girlfriend's laptop work fine. I connected it with the Ethernet cord and that didn't change anything. I have Windows 7. It's on a 2010 Samsung (I'm not very tech savvy so I'm not sure about all the other details).
View 14 Replies
View Related
Apr 10, 2012
I wanted to know if I can somehow setup my network to use a proxy for all connected devices?
For example I can go into Firefox proxy settings and setup to browse using proxy. Is there any way to do this at the router or switch level to not have to configure every device individually I have a wndr3700 router and a HP procurve 1810g switch and am thinking of building a pfsense box.
View 8 Replies
View Related
Apr 20, 2012
The other day i was on my mums laptop (ASUS X5DIJ) at her house all working fine the battery died so i plugged it in and started it up again however the charger cant have been fully connected and once back in windows the battery died again on the next boot i noticed windows said it had found the system CMOS/real time clock and had installed drivers for it. checked the driver details it says no driver files are required just like it should ever since then it connects to the network but will not connect to the internet at her house or at mine through wireless and ethernet cable although all other computers work fine windows troubleshooter says "Windows could not automatically detect this networks proxy settings"
I've tried
resetting routers and laptop = no change
netsh winsock reset and netsh int ipv4 reset = no change
ipconfig /flushdns = no change
ipconfig /registerdns = no change
[code]....
View 9 Replies
View Related