SBS 2008 Ram Consumption
Aug 20, 2012
I have a SBS 2008 box at a clients with 16 gig of ram in it. Right now the server is using 88-90% of it's ram. I have checked the device manager to see how much ram the services are using and everything except for a few services are using less then 200,000k each. The exchange store is using around 600,000k which is right in range and then a couple w3wp.exe services are using around 300,000k or less. Now here is where the issue lies 3 SQL engine processes are using a total of around 7 gig of ram. My client runs a custom software that uses sql express to host the database. And I am just wondering if it's normal for SQL to use this much ram in 2008 or should I be talking to the software company about the large consumption. It's basically using half of the available ram on the server. I did upgrade this machine from 8 gig ram about 9 months ago and it was fine for a while then all the sudden SQL just started eating more ram to point where we are today.
View 10 Replies
ADVERTISEMENT
Oct 24, 2011
I planned to install a LMS 4.0.1 on a VMWare server with Windows 2008 R2 64bits.
Is it supported with the "Windows 2008 R2" patch or do I need to order LMS 4.1 version ?
View 5 Replies
View Related
Jan 17, 2013
what is the NM-32A card power consumption?
View 2 Replies
View Related
Nov 27, 2011
I currently have a 2851 router with 2Mbps point-to-point leased circuit on its serial interface and most of the time its congested. Any tool for measuring the current consumption that is happening on the link other than netflow.Was looking for something for a graph or chart displaying the current consumption rate.
View 2 Replies
View Related
Oct 16, 2012
I am finding the power consumption of WS-C3750X-24T-L, WS-C3750X-48T-L, WS-C3560X-48T-L and WS-C3560X-24T-L switches?
View 5 Replies
View Related
Aug 2, 2010
We are planning for the office move and I need to estimate how much power we need to run a fully populated Cat4507R switch. The chassis include 2 Sups, one 6-port fiber line card, two 48-port Gig and two 48-port FastEthernet line cards. The switch also has redundant power supply (4200ACV 1400W). According to Cisco Power Calculator [URL], I need 49.5 amp 110-120V circuit. It seems to be too much higher than real world. How many 20amp circuit we would need when all the ports are fully utilized?
View 3 Replies
View Related
Jun 5, 2012
What is the power consumption of the 6-port 40G M2 module for the NExus 7K?
It says "TBD" on the data sheet for the M2....and it says nothing about power for the Supervisos.
I need to know what the power draw is on a 7009 chassis, with 1 SUP and 5 of these cards....
View 2 Replies
View Related
Mar 14, 2012
I wondered, how much power do the SRP520-U series actual draw? Compared to commonly used home-grade equipment I think the power consumption is above average?
View 1 Replies
View Related
Jan 4, 2012
I have 2 x 3560e-24td-s
2 x ASA5510
2 x 2821(no modules)
2 x 2901
I'm trying to figure out power draw in Amps for my new cabinet. I looked at the data sheet for the 2821 and it says 3A for the 110V under the row AC Input Current, Would that be accurate if I did that for all the models and then just added up the total?
View 3 Replies
View Related
Apr 12, 2011
For a AIR-LAP1524SB-A-K9 Mesh Access Point I need amp (I) and power (W) consumptions of the power source options (12 VDC, 220VAC, etc.).
View 2 Replies
View Related
Mar 24, 2013
We own a Wifi controller 5508, with many access points connected to him. Except on the site where the controller is installed, all other APs are configured in FlexConnect mode through our MPLS network to prevent roundtrip for local communications (local client to local server for example).
Because of important slowness on one site where 8 APs are installed, we captured the traffic going in and out of our MPLS router and we discovered that the APs are consuming about 150kbits/s each in one-way communications with the controller (controller to APs), even when nobody is present (the capture was done this sunday).
Could you confirm me if this behaviour is normal or not ? What could explain such a large amount of data between the controller and the APs ?
View 11 Replies
View Related
Mar 3, 2013
I need to figure out the max power consumption of 7009. The issue is, at this point i am not sure what modules will be used, so just to give an estimate, how we calculate the max power consumption of nexus 7009 ?
View 2 Replies
View Related
Jan 20, 2013
My ASA 5505 getting pretty hot after a while and so I used a wattmeter to find out what´s happening.
260 watts is quite a lot if the device is running in idle mode and has no active device attached nor any config has been installed.
What's your experience of the ASA 5505 power consumption ?
View 1 Replies
View Related
Sep 18, 2012
My company is composed of three different campuses, all with a similar network topology. We currently are experiencing high bandwidth on our serial interface at one of the campuses in particular. The network is composed of about 20 VLANS routed internally using a Cisco 6509. Traffic to the outside is PAT’d by an ASA 5510 and then forwarded through our edge router interface. Each VLAN is PAT’d to a specific public address.Due to the PAT, how would you recommend determining what specific private addresses are consuming our resources on the serial interface. When I look at our NMS, it reports the public address, but that only narrows it down to a VLAN. For example, all the devices in VLAN 6 are translated to 146.34.118.245, and 146.34.11.245 is a top talker.
View 1 Replies
View Related
Jun 2, 2013
I am calculating Cisco 4500X power consumption requirements to select appropriate UPS systems. I have 4500X switch with dual power supplies.which value should I take for power consumption calculation, in data sheet it has two values: AC Power Max Rating: 750W System Power Consumption: 330W nominal/400W max
Which values should I take, to calculate UPS systems capacity? And also I am interesting when 4500x has two power supplies what is power consumption?
View 5 Replies
View Related
Mar 7, 2013
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies
View Related
Dec 15, 2011
i have an SBS2003 server thats running quickbooks pro 2008and i have 3 workstations connecting to itall was working finethen about a week ago we started to get disconnection errors on all the workstations.i got a small 5 port ethernet switch and connected all workstations and the server into that, but its the same thing.i ran a ping from the server to a workstation with the -t switch and never saw once a drop in connection.the broadband connection is having an issue where it disconnects every few minutes to 1 hour...but i dont think this is related as when i turn off the modem i still have the problem.
View 5 Replies
View Related
Feb 26, 2013
So as far as I can tell our server is not running any AV whatsoever, so I'm buying Kaspersky Small Business with the 10 PC package:Kaspersky Small Office Security | Virus Protection | Kaspersky Lab to install on it and our other PCs, and I was wondering if there's anything I need to know about installing AV on a server.
View 19 Replies
View Related
Aug 13, 2012
I have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies
View Related
Apr 13, 2012
I'm wanting to make use of an old PC here that has Windows Server 2008 on it. i basically just want to use it as a backup machine. i have 1 PC, 1 Mac and an iPod Touch that'll be accessing it. what do i need to do to set it up? is there a guide anywhere? how is it different to setting up a NAS using FreeNAS?
View 3 Replies
View Related
Jan 13, 2012
My computer has today 3x2 TB WD Green disks and thay are really slowing my system down so now I need to move them to somekind of NAS.I was first lookin at the "Synology Disk Station DS411j" but then I found that I got some old hardware laying around (AMD 3200+ CPU, 1 GB ram,XFX GeForce 7600GT, Seasonic SS-300FT in a Thermaltake Xaser II chassi). So now I got some questions :
1. I was looking into running FreeNas on my NAS but if the NAS is crashing then it will be alot of work to get the data back? Is it right that its not possible to just mount a drive from the FreeNas in to my Windows7 computer and read the data?
2. If I install Windows 2008(not r2 that demands 64bits CPU) and then uses dynamic volums to get one big volume, what will happen if this Windows2008 craches? will it be able to place one of the disks in my windows7 computer and reda the data?
3. What happens if one disk i a dynamicvolume craches? will all data be lost?
4. Is there any sleepmode in Windows2008? If would be nice if the computer shutsdown at night and startsup when it is about to be used.
5. Will a finished product like the "Synology Disk Station DS411j" demand less power? Will I earn anything to buy the DS411j instead of my old hardware if we look on the economics?
View 2 Replies
View Related
Jul 22, 2012
Still trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. Don't know what this means. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. All the other machines are Windows 7. Oh yes, this is a work group with DHCP from a VPN and a Comcast (bless their souls) gateway.
View 2 Replies
View Related
Nov 29, 2012
I have a new server that i wish to set as an ISA Server,I've created a new domain on it and set it as a dhcp server.As isa 2006 doesnt work on a 64 bits server what is a good firewall software substitute? My server specs are as follow HP Proliant G7 DL 360 Xeon,12gb memory with a 64bits 2008 r2.
View 3 Replies
View Related
Oct 17, 2011
I'm trying to install LMS 4.0 on a 2008 R2, I got a message saying that this is not supported. Going through Cisco documentation I read the following:
Caution If you want to upgrade the operating system from Windows 2003 or Windows 2008 to Windows 2008 R2, you must first complete upgrading the operating system, and then install the LMS 4.0.x Windows 2008 R2 patch.
I'm a bit confused because i'm not upgrading the operating system, this is a fresh install.
I tried to run this in compatibility mode, selected 2008, and running it as an Admin, this time I'm getting a Locale error stating that this is only supported in US English or Japanese. I've changed the system locale to US English, still getting the same error.
View 18 Replies
View Related
Aug 24, 2011
net send command not available on server 2008
View 1 Replies
View Related
Nov 2, 2011
I need to connect a OS2 pc with Windows Server 2008. However, I have tried the Netbeau (which can work in connect with Windows Server 2000), I cannot install the Netbeau to Windows Server 2008.
View 2 Replies
View Related
May 26, 2011
I have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC
View 1 Replies
View Related
Apr 19, 2011
Can I install win2008r2 standard to a 500gb usb ultra portable harddrive and connect it to my net book and run it ? I am studying for the MCITP and want to use it for that purpose?
View 3 Replies
View Related
Oct 3, 2011
I am trying to setup vpn on a sbs 2008. Our gateway is a Linksys router RV082 (192.168.125.1). Port 1723 is open and forwarded to our main server...(192.168.125.2). I need to setup vpn client access. I setup a couple of users on the router to test the connection. Block WAN request is disabled on the router. I make sure I am connected to another network(tethering from my android phone, I confirmed I had internet access) to test the vpn. On my win7 laptop, when I setup the vpn, I input the wan IP with the port to connect to: 6x.19x.7x.9x:1723. I input the credentials I setup on the router.I get error 868: the remote connection was not made because the name of the remote access server did not resolve. Our DNS is managed remotely by Domain Names, Web Hosting and Online Marketing Services | Network Solutions.
View 3 Replies
View Related
Sep 4, 2012
I am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
View 4 Replies
View Related
Apr 19, 2012
I just started a new job and on there server running Server 2008 they have a 1TB hd it is mirrored. Issue I saw right away is they save EVERYTHING there. Is there an easy way to just add diskspace like as an external storage or whatever without having to rebuild server and rebuild raid?
View 1 Replies
View Related
Jul 17, 2011
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies
View Related
Mar 24, 2012
Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies
View Related
