I just started a new job and on there server running Server 2008 they have a 1TB hd it is mirrored. Issue I saw right away is they save EVERYTHING there. Is there an easy way to just add diskspace like as an external storage or whatever without having to rebuild server and rebuild raid?
View 1 Repliesshow me the necessary steps and a type of hardware/software to buy to setup a network storage server that allows me and my family to access/share all files from anywhere thru the internet?
View 5 Replies View Relatedi am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
View 5 Replies View RelatedI am having trouble setting up mapped network drive or folder. My server and workstation are set up on a domain with windows server 2008 r2. The server only shows up on my workstation(windows 7) when I put in \server in the search. It pops up then on the left hand side but not in the main window. When I go back to my computer "map network drive" I hit browse and still the server does not show up under the network (but my computer does). When I try to do this on the server, I go to map network drive and nothing shows up under the network. I have even gone into group policies and mapped the drive that way and still nothing shows up.
View 1 Replies View Relatedi am setting up a windows server 2008 to be used as a nas on my bell modem network that my pc is also on. the bell modem is then connected to a dlink 655 router by lan on the bell modem to wan on the dlink. the dlink is used for wireless connections to the laptops in the house. my problem is that the laptops cant see my nas but have access to the internet. should i switch my program for the nas from windows server 2008 to something like free nas or can i change setting in my router and modam?
View 1 Replies View RelatedFirst network card have the static IP address 82.x.x.30 from the ISP.The second network card have 2 IP addresses: 192.x.x.0 and 82.x.x.1 ( first IP is for LAN and second IP is for routing the additional IP class).In other words if i have the computer "Z" with configuration: IP: 82.x.x.100 Sub: 255.255.255.128 and GTW:82.x.x.1 i can access the internet but practically with with the IP from ISP wich is 82.x.x.30
View 1 Replies View RelatedI am looking a way to allow/block certain users to access internet.
View 2 Replies View RelatedMy Windows Server 2008 r8 has 2 network card
1st card I have connected to Internet Router
2nd card I have set up the LAN to access the database application from server with 2 clients.
Question
1) Currently 2 clients can't access the internet
2) How to setup the 2 clients to be able to access to internet?
How to configure in windows server 2008 network NIC1 is WAN and NIC2 is LAN?
View 1 Replies View Relatedwhy Windows Server 2008 is not a supported OS for Cisco Network Assistant?I am currently evaluating switch management solutions for use with Catalyst 2960 and 3750 series switches, and would like to be able to backup and restore configurations, as well as make configuration changes. My management Server is running Server 2008.Is Prime LMS my only option?
View 5 Replies View RelatedI've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies View Related[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedI've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
is file storage of a small business referring to a file server?
View 1 Replies View RelatedI am setting up an offsite storage server for work at my home which will sync a few times a day to grab data and i wanted to ask about options for encryption or if i should worry about it.i am going to be initially dumping about 1-1.5T worth of data, with then maybe a couple of gigs a day added of new stuff.i am going to use server 2008 r2 as i am also doing a read only DC/AD for this system to give me and offsite controller just incase also.
I was thinking encryption for one more level of safety just incase something happened to the server, like theft or something but not sure what could reliably handle that much data ? System is only a dual core e7500 with 8G of ram, i have 2x500G SATA in raid 1 for the OS and 4 x 1T drives in raid 6 with 2 more coming.
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedSo as far as I can tell our server is not running any AV whatsoever, so I'm buying Kaspersky Small Business with the 10 PC package:Kaspersky Small Office Security | Virus Protection | Kaspersky Lab to install on it and our other PCs, and I was wondering if there's anything I need to know about installing AV on a server.
View 19 Replies View RelatedI have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedStill trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. Don't know what this means. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. All the other machines are Windows 7. Oh yes, this is a work group with DHCP from a VPN and a Comcast (bless their souls) gateway.
View 2 Replies View RelatedI have connected my LaCie rugged drive to the router and would like to use it as backup storage and as a way to stream video to my PS3.When I go to my advanced settings for the router and go to the storage heading I can see my LaCie and its specifications. There is a button next to it that says "claim", which I press, but nothing happens.I don't have the option to create a shared folder, and I can't access the drive from my Mac.On a somewhat related note, I've enabled the media server and can find it on my PS3, but there is nothing in the root folders. How do I put stuff (movies, music,etc.) into these root folders?
View 7 Replies View Relatednet send command not available on server 2008
View 1 Replies View RelatedI have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC
View 1 Replies View RelatedCan I install win2008r2 standard to a 500gb usb ultra portable harddrive and connect it to my net book and run it ? I am studying for the MCITP and want to use it for that purpose?
View 3 Replies View RelatedI am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies View RelatedAny methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedI have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies View Relatedi m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies View RelatedI want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies View RelatedIs it possible to use windows server 2008 as a webhost for a website i'm building?
View 6 Replies View RelatedDoes WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies View RelatedI planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View Related