Cisco Infrastructure :: NM-32A Card Power Consumption?
Jan 17, 2013what is the NM-32A card power consumption?
View 2 Replies
ADVERTISEMENT
Cisco Infrastructure :: Power Consumption Of C3750X And C3560X
Oct 16, 2012I am finding the power consumption of WS-C3750X-24T-L, WS-C3750X-48T-L, WS-C3560X-48T-L and WS-C3560X-24T-L switches?
View 5 Replies View RelatedCisco Switching/Routing :: Power Consumption On 4507R
Aug 2, 2010We are planning for the office move and I need to estimate how much power we need to run a fully populated Cat4507R switch. The chassis include 2 Sups, one 6-port fiber line card, two 48-port Gig and two 48-port FastEthernet line cards. The switch also has redundant power supply (4200ACV 1400W). According to Cisco Power Calculator [URL], I need 49.5 amp 110-120V circuit. It seems to be too much higher than real world. How many 20amp circuit we would need when all the ports are fully utilized?
View 3 Replies View RelatedCisco Switching/Routing :: Power Consumption On Nexus 7K?
Jun 5, 2012What is the power consumption of the 6-port 40G M2 module for the NExus 7K?
It says "TBD" on the data sheet for the M2....and it says nothing about power for the Supervisos.
I need to know what the power draw is on a 7009 chassis, with 1 SUP and 5 of these cards....
Cisco Routers :: Power Consumption Of SRP520-U Series
Mar 14, 2012I wondered, how much power do the SRP520-U series actual draw? Compared to commonly used home-grade equipment I think the power consumption is above average?
View 1 Replies View RelatedCisco Switching/Routing :: What Is Power Consumption Of 3560
Jan 4, 2012I have 2 x 3560e-24td-s
2 x ASA5510
2 x 2821(no modules)
2 x 2901
I'm trying to figure out power draw in Amps for my new cabinet. I looked at the data sheet for the 2821 and it says 3A for the 110V under the row AC Input Current, Would that be accurate if I did that for all the models and then just added up the total?
Cisco Wireless :: AIR–LAP1524SB–A–K9 Power Consumption?
Apr 12, 2011For a AIR-LAP1524SB-A-K9 Mesh Access Point I need amp (I) and power (W) consumptions of the power source options (12 VDC, 220VAC, etc.).
View 2 Replies View RelatedCisco Switching/Routing :: Max Power Consumption Of Nexus 7009?
Mar 3, 2013I need to figure out the max power consumption of 7009. The issue is, at this point i am not sure what modules will be used, so just to give an estimate, how we calculate the max power consumption of nexus 7009 ?
View 2 Replies View RelatedCisco Firewall :: How Many Watts Required - ASA 5505 Power Consumption
Jan 20, 2013My ASA 5505 getting pretty hot after a while and so I used a wattmeter to find out what´s happening.
260 watts is quite a lot if the device is running in idle mode and has no active device attached nor any config has been installed.
What's your experience of the ASA 5505 power consumption ?
Cisco Switching/Routing :: Calculating 4500X Power Consumption Requirements To Select Appropriate UPS Systems
Jun 2, 2013I am calculating Cisco 4500X power consumption requirements to select appropriate UPS systems. I have 4500X switch with dual power supplies.which value should I take for power consumption calculation, in data sheet it has two values: AC Power Max Rating: 750W System Power Consumption: 330W nominal/400W max
Which values should I take, to calculate UPS systems capacity? And also I am interesting when 4500x has two power supplies what is power consumption?
Cisco Infrastructure :: 3600 With Power Connector But Do Not Have RPS
Nov 4, 2012I have a router 3600 with a power connector kind RPS but I don't have a RPS system, Do it exist a kind of wire that I can connect directly from my router to AC?
View 1 Replies View RelatedCisco Infrastructure :: Converting WS-C3560G Switch To DC Power?
Apr 15, 2013What needs to be done to convert a WS-C3560G-24TS-E to DC power?
View 2 Replies View RelatedCisco Infrastructure :: Running A 4507 With Power Supplies
Jun 9, 2011I am running a 4507 with the Power Supples PWR-C45-2800ACV. url...
Can I plug this power supply into this UPS unit? url...
Cisco Infrastructure :: 3550 - Limiting Power Allocation To 15.4 W On Pre-POE Switch?
Jan 2, 2013I'm using a Catlyst 3550 to supply power to a IP network surveliance camera. By default, the predecesor to POE, Cisco Inline Power allocates 15.4 W of power to a port ... What is the process for reducing this power output?
"For an IEEE device, the switch always allocates 15.4 W to the port. The switch does not display the IEEE class type in the show power inline privileged EXEC command output. Instead, it displays n/a."
Cisco Infrastructure :: 2960s / 3750s / 6506 - AC Power Outlet On Catalyst Switch
Apr 15, 2011I have several 2960s and 3750s and two 6506 (ws-cac-3000w) recently move to new location The power outlet is the same ,but Volt is different current 2960/3750 use this(one phase 3 wire) 220v and new location change to (from 3 phase 4 wire -> one phase 220v)6506 current using(one phase 3 wire) and will be change to (from 3 phase 4 wire -> one phase 220v)
I had search doc about power supply /cable , only show support single phase 220 v ,but not description vlot between each wire !!Does new location power outlet suit for 2960/3750s power and 6500 ws-cac-3000w ?!? Do I need chane power outlet back to current using?
Cisco Infrastructure :: Connect Two Router With One HWIC-4ESW Card?
Sep 2, 2011How Can I connect two router with one HWIC-4ESW card , I have Problem with this because when I tried to do , I received the message I can´t configure IP address on L2. The idea is to connect two routers with /30.
View 2 Replies View RelatedEthernet Card Driver Crash After Power-up
Sep 2, 2012i upgraded my computer from win 7 ultimate 32 bit to 64 and when i shut down my computer and power up the local area connecion dont recognize the ethernet card my ethernet card is 82578 dc gigabit not onboard card and i installed all the drivers to the ethernet card could it be my motherboard ? dp55wb?
View 6 Replies View RelatedLAN Card Is Not Responding But It Only Receives Light From The Power Source
Feb 1, 2012my LAN card is not responding but it only receives light from the power source?how can i make it work?
View 1 Replies View RelatedCisco Switching/Routing :: 6513 - Mod 9 Recycling Power - 10 Gig 6704 Card
Feb 26, 2012I have 2 6513's between floors that have a port channel between them using 2 10 gig interfaces on 6704 cardsThis weekend I lost the port channel for about 4 mins and then it came back up. Unfort at the time I had logging turned off so was unable to get any info as to why. But I turned on debugging that eve and this morn it happened again.
Looks like Mod 9 is being power recycled, 6704 is about a year old and had been running for a month or so without issue.The only thing I have upgraded in the last few weeks was I put in a pair of 6000w supplies..But I am not having any other issuesother than mod 9. In hind sight a better design would be to spread this port channel across 10 gig cards. I'll work on that next.
2w2d: %OIR-SP-3-PWRCYCLE: Card in module 9, is being power-cycled 'Off (Module Reset due to exception or user request)'2w2d: %C6KPWR-SP-4-DISABLED: power to module in slot 9 set Off (Module Reset due to exception or user request)*Mar 1 00:00:02.331: DaughterBoard (Centralized Forwarding Card)
[Code].....
Cabling / Cards :: Tenda W322P - No Power To PCI Wireless Card?
Jan 13, 2011I am running Windows 7 on a system with an Asus P5ND Mobo and am trying to install a Tenda W322P wireless card. The led on the card doesn't light up indicating no power is making it to the card. I have tried installing the drivers off the cd but it says it won't as it cannot detect the card and I installed the drivers from their website but Windows still won't detect it. I have tried turning PCIpnp both on and off at the mobo but nothing seems to make a difference. Have they just sent me a duff card or could it be my mobo or something else?
View 5 Replies View RelatedDell :: Intel 82567LM Gigabit LAN Card Connecting At 10 Mbps - How To Disable Power Mgt On NIC
May 23, 2010How do I disable the power management feature that slows my NIC down when I am on battery power?
I have a dell e6500 with a Intel 82567LM Gigabit LAN card that always connects at 10Mbps when I plug in the ethernet cord when I am on battery power, I've tried using different routers (I have two gigabit routers and one 100 mbps router)... it still auto-negotiates at 10 mbps I've tried using different cat6 cables, it still auto-negotiates at 10 mbps.I've checked the drivers, I have 10.0.6.0, which is the latest from the support.dell.com website.
However, the minute I plug in the laptop, the NIC connects at the proper speed. Essentially, when the laptop is using battery power, the NIC decreases it's speed to 10 mbps. When I plug the laptop in, the speed jumps up to what it should be (either 100 mpbs or 1 Gbps, depending on which router I'm plugged in to).
So, how do I disable this feature? I want to connect at the maximum possible speed, regardless if I am plugged in or not.
SBS 2008 Ram Consumption
Aug 20, 2012I have a SBS 2008 box at a clients with 16 gig of ram in it. Right now the server is using 88-90% of it's ram. I have checked the device manager to see how much ram the services are using and everything except for a few services are using less then 200,000k each. The exchange store is using around 600,000k which is right in range and then a couple w3wp.exe services are using around 300,000k or less. Now here is where the issue lies 3 SQL engine processes are using a total of around 7 gig of ram. My client runs a custom software that uses sql express to host the database. And I am just wondering if it's normal for SQL to use this much ram in 2008 or should I be talking to the software company about the large consumption. It's basically using half of the available ram on the server. I did upgrade this machine from 8 gig ram about 9 months ago and it was fine for a while then all the sudden SQL just started eating more ram to point where we are today.
View 10 Replies View RelatedCisco WAN :: Bandwidth Consumption Tool For 2851
Nov 27, 2011I currently have a 2851 router with 2Mbps point-to-point leased circuit on its serial interface and most of the time its congested. Any tool for measuring the current consumption that is happening on the link other than netflow.Was looking for something for a graph or chart displaying the current consumption rate.
View 2 Replies View RelatedCisco :: 5508 - High Bandwidth Consumption For APs To Controller Communications
Mar 24, 2013We own a Wifi controller 5508, with many access points connected to him. Except on the site where the controller is installed, all other APs are configured in FlexConnect mode through our MPLS network to prevent roundtrip for local communications (local client to local server for example).
Because of important slowness on one site where 8 APs are installed, we captured the traffic going in and out of our MPLS router and we discovered that the APs are consuming about 150kbits/s each in one-way communications with the controller (controller to APs), even when nobody is present (the capture was done this sunday).
Could you confirm me if this behaviour is normal or not ? What could explain such a large amount of data between the controller and the APs ?
Cisco Switching/Routing :: 6509 Matching A Device To Bandwidth Consumption
Sep 18, 2012My company is composed of three different campuses, all with a similar network topology. We currently are experiencing high bandwidth on our serial interface at one of the campuses in particular. The network is composed of about 20 VLANS routed internally using a Cisco 6509. Traffic to the outside is PAT’d by an ASA 5510 and then forwarded through our edge router interface. Each VLAN is PAT’d to a specific public address.Due to the PAT, how would you recommend determining what specific private addresses are consuming our resources on the serial interface. When I look at our NMS, it reports the public address, but that only narrows it down to a VLAN. For example, all the devices in VLAN 6 are translated to 146.34.118.245, and 146.34.11.245 is a top talker.
View 1 Replies View RelatedCisco Switching/Routing :: 3750 - Power Stack Has Unbalanced Power Supplies
Jun 9, 2013I am receiving the following error on 3750 stack switches. have already verified the power status and found ok.
IOS used: Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)
211540: Jun 10 10:45:17.935 UTC: %PLATFORM_STACKPOWER-4-UNBALANCED_PS: Switch 4's power stack has unbalanced power supplies
211541: Jun 10 10:46:18.045 UTC: %PLATFORM_STACKPOWER-4-UNBALANCED_PS:
[Code]....
Cisco Switching/Routing :: Stack-power 3750x / FRU Power Supply Is Not Responding
Sep 4, 2012After stacking two 3750X switches, with four equal power-supply's, with StackWise and PowerStack , still got the next message every few hours %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding (gn4m-rt1p08-04-2)( note that the message revers to the second switch in the stack ) although the stackwise and powerstack on the switches is oke and are working correctly. !
Config : Stack-power in power-sharing mode/strict With CLI on the switch : All the power supply's and stack-power details, prio look OK.
Only: LMS prime /inventory/cisco-view/configure/power supply status result : some power supply's are marked as disabled.with the command > power supply 2 slot a off/on I manage to get the status back to "normal", but after a few hours some power supply's are again marked as "disabled".
Looks like SNMP en IOS difference from opinion.
Hardware
WS-C3750X-24S-S
C3KX-PWR-350WAC
Software
15.0(2)SE
C3750E-UNIVERSALK9-M
Cisco Wireless :: 1252 - WCS Reports AP Draws Low Power - With Correct Power Injector
Jul 21, 2011I keep getting alerts from our WCS stating that our 1252s are drawing low power. Now I am aware that they require enhanced PoE (up to 20W) but as we only have standard PoE in that building we purchased the 1252 series power injectors to go with them.
However, even with the correct power injectors the WCS still reports the draws low power error.
Is this a bug? Running WCS 7.0.172 at the moment.
Forgot to say we are using the PWR-INJ4 and the injector status is enabled and you see the injector MAC address when you drill in to the AP status.
Cisco Switching/Routing :: WS-C3560-48PS-S Show Power Inline But No Power Available
Apr 14, 2013We have two switches of the same model (WS-C3560-48PS-S) that are not providing PoE. I'm trying to remotely determine what the cause of the issue is.
Here is some output.
Hostname#show power inlineAvailable:0.0(w) Used:0.0(w) Remaining:0.0(w)
Interface Admin Oper Power Device Class Max (Watts)--------- ------ ---------- ------- ------------------- ----- ----Fa0/1 auto off 0.0 n/a n/a 15.4Fa0/2 auto off 0.0 n/a n/a 15.4Fa0/3 auto off 0.0 n/a n/a 15.4Fa0/4 auto off 0.0 n/a n/a 15.4Fa0/5 auto off 0.0 n/a n/a 15.4Fa0/6 auto off 0.0 n/a n/a 15.4Fa0/7 auto off 0.0 n/a n/a 15.4Fa0/8 auto off 0.0 n/a n/a 15.4Fa0/9 auto off 0.0 n/a n/a 15.4Fa0/10 auto off 0.0 n/a n/a 15.4(code)
Cisco Switching/Routing :: 6500 - Power-Redundancy Mode Combined And Power Fail
Feb 28, 2011I have a 6500 chassis with 2 power supplies. At the moment I am using the default configuration:
power-redudancy mode redundant
The problem is that an inserted module is in "power deny" state due too insufficient power.
I know, that It's not a good idea to change into combined mode (loss of redundancy), but my customers requested this anyway.
So I will change to combined mode. So here's the 1 million dollar question: "Which modules will go into power deny, if one of my power supplies fails?"
The 6500 config guide states:
"Power supply is removed withredundancy disabled
• System log and syslog messages are generated.
• System power is decreased to the power capability of one supply.
• If there is not enough power for all previously powered-up modules, some modulesare powered down and marked as power-deny in the show power oper state field."
Well, do you know if there's any way to configure some kind of priority? E.g. I definetly don't want by 10Gig Module or WiSM module to be in power deny. Can i statically make sure, those module will be powered on for sure? Like: "power enable module slot_number" How is this calculated? Or is random?
Cisco Switching/Routing :: 3750X Stand Alone Secondary Power Supply Act As Pool Of Power
Apr 4, 2012In a stand alone 3750x switch configuration, can the secondary power supply only act as a redundant power supply (active/standby), or can it become a "pool" of power similar to power sharing mode for StackPower (somewhat active/active)? I understand there is no stack involved here but I'm curious if this functionality is possible.
View 1 Replies View RelatedCisco Firewall :: ASA 5512-X - Automatic Power-on After Power Failure?
Dec 5, 2012how can I enable an automatic power-on after a power failure on an ASA 5512-X?
View 5 Replies View RelatedDell :: How To Enable Automatic Power-on After Power Failure On ASA 5512-X
Mar 3, 2013how can I enable an automatic power-on after a power failure on an ASA 5512-X?
View 12 Replies View Related
