Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
View 5 RepliesI have installed the Cisco ACS 4.2 in a server running Windows 2003 Server, and this server is member server of the domain. The ACS is working whit a Wireless Platform 4400, and authenticating to the Wireless Users using PEAP and Digital Certificate. But now, the windows platform will be upgraded to Windows 2008. My doubt are the following:
1. The ACS running in a windows 2003 server, will authentificate users in the new windows 2008 domain?
2. At the beginning, the ACS and the Windows domain was 2003. Now whit the change of the version of windows domain, What happens whit the configuration of the acs server as member server? I need reconfigure the member server configuration in the ACS Server?
I have configured a my desktop as a domain controller with server 2008..with dns service running on it. When i tried adding another desktop to this domain, i get the following error message
"Troubleshooting network identification Error: This computer successfully resolved the Domain Name System (DNS) service (SRV) resource record required to locate a domain controller, but it failed to locate a domain controller for the Active Directory domain displayed in the error message.
Cause: The required A (address) resource records that map the name of the domain controller to its IP address do not exist in DNS.
Solution: Verify that the required A resource records do not exist in DNS by using the Nslookup command-line tool.
See also: To verify that A resource records exist in DNS. Cause: The domain controller advertised in DNS may not be connected to the network or is connected to the network but is not running.
Solution: Verify connectivity and then verify that the domain controller is running.
See also: To test a TCP/IP configuration by using the ping command; DNS requirements for joining an Active Directory domain."
I just setup ACS 4.2 on windows 2008 standard server. I noticed that after a while, i could not launch the ACS from desktop. All services are up, i have restarted server a couple of times....The Program appears to launch and the disappears..
View 2 Replies View RelatedI have set up a Small business server environment for a client. One server in the network, it provides both DHCP, and DNS. Joined all of the XP machine to domain no worries. Tried to join the 7 machine and I get a "DNS couldn't be resolved" error. I know DNS is functioning properly on my server.
View 1 Replies View RelatedI have a network domain with 2 domain controllers running windows server 2008. At some point the DNS name for one of the servers got messed up and they stopped talking to each other even though they are on fixed IPs. The DNS problem has been fixed, but they haven't started communicating again. While the DNS was messed up the domain controllers kept running a different copy of the network. The DFS stopped replicating, the users lists fragmented and the network separated into two "shadow domains" with the same name. DC1 says it is healthy, but it claims DC2 is offline. DC2 claims it is healthy but DC1 is offline. I don't even know where to begin repairing this rift.
View 1 Replies View RelatedWithin ACS 5.2, does any know of a way to see which specific domain controller a request is sent to?
View 1 Replies View RelatedI try to join an ACS v. 5.3 to the domain. For my acs in Location A, I can join without problems using my account. When I try to join the ACS in location B to the same domain with the same account, it doesnt work.I looked at the debug log files for the ad client, and noticed, that the ACS in location B goes to a certain Domain Controller. However, I would have expected the ACS to contact another DC, which is located on the same location as the ACS ... this doesnt happen.
My question: How does the ACS determine what DC to contact ? Is it possible to force the AC to join by connecting a certain DC ?
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedHow has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedI am actually working in configuring a wireless controller 2504 integrated a windows 2008 server as radius server for authenticating the network users registered in a windows active directory database. The Radius server is a Windows 2008 Server with the rol of Network Policy Server.
I have been following a pair of documents in Internet, but it doesn't work yet.
Which authentication method should i use?...the Windows 2008 NPS doesn't work wtih LEAP, should i use PEAP or there is an another recomendation to authenticate the windows active directory users?
configuration tested working between a cisco wireless controller and Windows 2008 NPS as Radius Server for authenticating the windows network users.
I have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies View RelatedOn our ASA5510 in the area AAA Server Groups, there is an entry for LDAP and an object that refers to our 2003 Domain Controller. This DC has LDAP over SSL enabled and I can see the DN and Password for a domain user account.I've created two new DC's, both R2 2008 but when I enable these in the same way it says it could not authenticate, ERROR auth server not responding, AAA group removed.I thought this had something to do with CA being installed on a DC, but it's not running as a service on the DC that was already referred to.
View 2 Replies View RelatedMy Primary Domain Server is down and i have to format the server. I have 2 Additional domain controllers. How do I add DC after formating the server in the same domain.
View 1 Replies View Relatedgetting a cert off of a 2008 R2 CA and imported correct in to ACS 4.2? I've had and have seen other have the problem with creating a web server certificate from R2 (1024 bit) and putting it in ACS 4.2 only to have HTTPS/SSL no longer work correctly. I haven't even tested the intended purpose of the cert (EAP-TLS) yet, so who knows if that works. I've also seen through searching where some one was able to take a 2003 CA web server template and put it into R2 and it work, but I know longer have 2003 available?
View 1 Replies View RelatedI have a cisco ACS 4.0 build 27 on windows 2003 server . My site was working fine when i was having a AD on 2003 server . Recently i have migrated my AD servers is 2008 .
After the migration the ACS is not authenticating the users . Now i have made a server with 2003 and made the site working . I need a solution to make it work using 2008 server is there any compatiblity issue between ACS 4.0 and 2008 server .
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View Relatedi've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
Recently I've been working with the ACS 5.2 (Installed on VMWare). At the beginning I was using a Win Server 2003 Enterprise edition AD, and there was no problem with the AD and the CA Authority. Because some of my customers use Win Server 2008 I change the AD platform to Win Server 2008 Enterprise edition (x64).I don't really have a great experience with Win Server Platforms and, for what I've seen, the Win Server 2003 Services deployment is easier than the Win Server 2008 is.
So, when I used the Win server 2003 I could not only synchronize the ACS with the AD but also use some groups created on the AD to perform the Network Access Authentication. When I try to do the same with the Win Server 2008 AD the ACS and the Server get Synchronized but when I want to add the groups for the Authentication purposes there is no one, absolutely nothing... so I cannot do any test.Also I looked for information about the compatibility between the ACS 5.2 and the Win Server 2008 platforms and at the end the platforms are compatibles.
We are still running ACS 4.1 on Window 2003 server. We recently upgraded AD to 2008 although the domain and forest functional level are still 2003. After AD upgrade we now unable to authenticate via ACS Windows Database.
View 13 Replies View RelatedWe having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
[code]...
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedI have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedDoes WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies View RelatedI am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies View RelatedAny methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedI have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies View Relatedi m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies View RelatedI want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies View RelatedIs it possible to use windows server 2008 as a webhost for a website i'm building?
View 6 Replies View RelatedAs always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.