I just setup ACS 4.2 on windows 2008 standard server. I noticed that after a while, i could not launch the ACS from desktop. All services are up, i have restarted server a couple of times....The Program appears to launch and the disappears..
View 2 RepliesI´m looking at this document: [URL] and I´m not clear if Windows Server 2008 R2 Standard with SP1 is supported. The documentation refers to Windows 2008 Server SP2 and Windows 2008 Server R2, but I see no specific mention to Windows Server 2008 R2 Standard with SP1.
View 0 Replies View RelatedDoes LMS 4.0 support Windows Server 2008 R2 Standard Edition (64-bit )?Is necessary for a fresh installation to download and install the Windows 2008 R2 patch?
View 2 Replies View RelatedI would like to know the basic configurations for Win Server 2008 Standard for a small office (60 clients) The company has a Sales, HR, warehouse, and Accounting, and VPN for some sales, what configuration do you recommend me for each area? Right now my server has DHCP, DNS, and AD (do I need to install any other role?), Also what other configuration do I need in order to control my clients and users, and for security? how can I make the clients to save their files in my server? or make a copy of their files from their computers to my server? Any information for security? in my server or Router?
Like the tittle say, I just want to know all the configurations needed in a network for a small company.
Can I install win2008r2 standard to a 500gb usb ultra portable harddrive and connect it to my net book and run it ? I am studying for the MCITP and want to use it for that purpose?
View 3 Replies View RelatedWe have bought lms 3.2 and window server 2008 r2 standard. Now we know, it cant be used together Could we upgrade to lms 4.0.1 ? If so, how can we do ?
View 2 Replies View RelatedWe're installing LMS 3.2 on a VM machine running Windows 2008 Standard edition (64 Bit).
You cannot install CiscoWorks LMS 3.2 application(s) on an unsupported operating system or when Terminal Services is running on the supported Windows 2003 Server Standard Edition, Windows 2008 Server Enterprise Edition,Windows 2003 Server Enterprise edition, and Windows 2003 R2 Server Platforms. The setup program will exit when you click ok.You must either upgrade the operating system on the server to a supported version or install LMS 3.2 application(s) on another server that runs a supported operating system.
I've disabled all RDP sessions and ANTI-Virus Software.The documentation states 2008 server Standard (64 bit) is supported.
Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
View 5 Replies View RelatedI planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedIs it possible to have my file server only accessable in the LAN. I would like to block all inbound/outbound traffic outside of the LAN. I back up all of my personal files to that server and some contain sensitive information.
View 9 Replies View Relatedgetting a cert off of a 2008 R2 CA and imported correct in to ACS 4.2? I've had and have seen other have the problem with creating a web server certificate from R2 (1024 bit) and putting it in ACS 4.2 only to have HTTPS/SSL no longer work correctly. I haven't even tested the intended purpose of the cert (EAP-TLS) yet, so who knows if that works. I've also seen through searching where some one was able to take a 2003 CA web server template and put it into R2 and it work, but I know longer have 2003 available?
View 1 Replies View RelatedI have a cisco ACS 4.0 build 27 on windows 2003 server . My site was working fine when i was having a AD on 2003 server . Recently i have migrated my AD servers is 2008 .
After the migration the ACS is not authenticating the users . Now i have made a server with 2003 and made the site working . I need a solution to make it work using 2008 server is there any compatiblity issue between ACS 4.0 and 2008 server .
I have a client who does not use exchange, and doesn't need any of the SBS features.Their server is aging and are running out of disk space.
I'm in the process of building them a new file server and am considering using Server Standard 2008.I am even going to take them off the domain and make their server strictly a file server for Peacthree. It is the only reason they even need a "server".
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedI have installed the Cisco ACS 4.2 in a server running Windows 2003 Server, and this server is member server of the domain. The ACS is working whit a Wireless Platform 4400, and authenticating to the Wireless Users using PEAP and Digital Certificate. But now, the windows platform will be upgraded to Windows 2008. My doubt are the following:
1. The ACS running in a windows 2003 server, will authentificate users in the new windows 2008 domain?
2. At the beginning, the ACS and the Windows domain was 2003. Now whit the change of the version of windows domain, What happens whit the configuration of the acs server as member server? I need reconfigure the member server configuration in the ACS Server?
Recently I've been working with the ACS 5.2 (Installed on VMWare). At the beginning I was using a Win Server 2003 Enterprise edition AD, and there was no problem with the AD and the CA Authority. Because some of my customers use Win Server 2008 I change the AD platform to Win Server 2008 Enterprise edition (x64).I don't really have a great experience with Win Server Platforms and, for what I've seen, the Win Server 2003 Services deployment is easier than the Win Server 2008 is.
So, when I used the Win server 2003 I could not only synchronize the ACS with the AD but also use some groups created on the AD to perform the Network Access Authentication. When I try to do the same with the Win Server 2008 AD the ACS and the Server get Synchronized but when I want to add the groups for the Authentication purposes there is no one, absolutely nothing... so I cannot do any test.Also I looked for information about the compatibility between the ACS 5.2 and the Win Server 2008 platforms and at the end the platforms are compatibles.
We are still running ACS 4.1 on Window 2003 server. We recently upgraded AD to 2008 although the domain and forest functional level are still 2003. After AD upgrade we now unable to authenticate via ACS Windows Database.
View 13 Replies View RelatedWe having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
[code]...
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedI have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedDoes WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies View RelatedI am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies View RelatedAny methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedI have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies View Relatedi m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies View RelatedI want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies View RelatedIs it possible to use windows server 2008 as a webhost for a website i'm building?
View 6 Replies View RelatedAs always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.
View 3 Replies View Relatedim having problems getting desktop folder redirection to work on windows 7 machinesI have users set up just with local profiles but want to redirect "my documents" and "desktop" directories to the server. I have set up the gpo's on the server and it all works fine propergating to the xp machines but the windows 7 machines just wont take the desktop redirection. However "eventually" it did take the "my documents" redirection policy
View 7 Replies View RelatedI have a windows 2008 foundation server at a clients property and they wish to have users access shares on a data drive that is seperate on the server.I have the server setup with active Directory Users and logon scripts to their local shares on the data drive but need to setup VPN so they can use their mapped drives at home.
View 1 Replies View Related