Use Cross Cable For Setup Domain Controller?
Aug 11, 2011I have only one PC. I use cross cable for setup Domain controller. Than network icon show available network but it is just only send and can't received.
View 1 Replies
ADVERTISEMENT
AAA/Identity/Nac :: ACS 5.1 Authentication From Cross Domain User
Dec 28, 2011We have cross domain trust relationship established and I have added the user group in our ACS 5.1. we are using Active directory as an external Identity store. Also I have created a rule in the 'Access polices' to allow the user group. From the cross domain, I use abc@xxx.xyz as a user id, but I get this error message 13036 Selected Shell Profile is DenyAccess.
View 3 Replies View RelatedHow To Connect Two PCs With Cross Cable
May 4, 2011How to connect a pc to pc with cross cable
View 2 Replies View RelatedCisco Switching/Routing :: Connect 3550 And 3750 Through Cross Over Cable Trunk Link?
Jan 8, 2013I am trying to implement in the lab. I have 2 switches 3550 and 3750. my questions are:
1. why i can't see vlans in the running config on switch 3750 even after i created 3 vlans?
2. the 3750 is power over ethernet switch and i am trying to connect 3550 and 3750 thru cross over cable trunk link and the ports doesn't show up no light nothing. is it the right way of cabling.
Domain Controller Cannot Be Contacted
Nov 18, 2012In my office we are using two networks , one is 16.x.x.x and another on is 15.x.x.x . 16.x.x.x having the domain controller. 15.x.x.x is only connected with Workgroup. my question is it possible to add 15.x.x.x network system into 16.x.x.x network . I tried to add but it gave error message "Domain Controller can not be contacted". Generally we cant add it into the domain i know that. is there anyway to connect the 15.x.x.x systems into 16.x.x.x domain using router in the network.
View 1 Replies View RelatedCannot Obtain Domain Controller Name
Jun 19, 2011Type: Error
EventID: 1054
Description: Windows cannot obtain the domain controller name for your computer network. The specified domain either does not exist or could not be contacted. Group Policy processing aborted.
Dad's work laptop (XP) will no longer connect to any wifi at all. I removed the Intel PRO/set wireless utility so it would default to windows, enabled the Wireless Zero Config. It will acknowledge the network, attempt to get an IP address from the network for 1 minute, then it rotates down to the next network SSID in queue (I have 3 SSID's in our house). When it reaches the end, it just goes back to the "Windows is not connected to any wireless networks" message.
NT4 Domain Controller Lost?
Mar 1, 2011In 2004 I had a small home network of an NT4 domain controller with a 98 client and an XP client and an NT4 workstation laptop.ll was fine with the NT4 server providing a central store and print queue for a networked laser.Over time the laptop has been replaced with a Win7 (which will access the files but really doesn't the NT4 domain.) The Win98 has died and now finally the NT4 sever has gone too.I intend to revert now to a workgroup type set-up and forget about domains (I don't need it really) My problem is if I remove my XP machine from the domain I loose all the program menu, shortcuts desktop etc. which are stored under the domain user name login.Can I retrieve these or at least look at them so I can set up the local XP administrator account with all my familiar stuff.
View 3 Replies View RelatedDomain Controller Cannot Be Found
Jul 5, 2012I hav windows server 2003 w/ 3 clients on my home network.2 of these machines link w/ server when i formatted & try to link 3rd machine it says "A domain controller for the domain fits.local could not be contacted" this problem I have 2003 server + isa server 2004 + exchange server 2003 installed in one core i3 machine..........
View 9 Replies View RelatedCisco :: DMZ Connectivity To Domain Controller / AD
Feb 16, 2012We relocated several servers to our DMZ and, without a domain controller in the DMZ (we plan to put a RODC in the DMZ later when we mvoe to Windows Server 2008), i punch through the standard recommended TCP ports. ports 88,135, 389, 53, etc.) to the internal network located DC. I am double hopping to the DC (I hope thast doesn't matter) as the DMZ located web server communicates to another IP address in the same DMZ network and then I NAT that address to the internal IP address of the DC. Everything seems to be working for the servers we moved to the DMZ but i think i don't have all the necessary TCP/UDP ports punched through because we have found that logging into the DMZ servers is taking an extended amount of time, sitting on the “applying settings” screen. For 2-34 minutes. Also, we noticed that our applciations fols have to now add the fully qualified domain names when making calls to servers that just needed the domain name. When i open the access-list up completely without opening specific TCP/UDP ports, the issue is resolved.
View 4 Replies View RelatedDNS / DHCP Domain Controller Addition
Feb 10, 2011I am having trouble adding a computer to the Domain Controller. I have a cable modem running into a di-524 router. The router has DHCP and DNS relay disabled. I set the LAN IP Address of the router to 192.168.2.1. The router is connected to a switch with 10 pc's and a server running 2003. The server has an IP Address of 192.168.2.2. I setup a DHCP server inside 2003 with a scope of 192.168.2.100-192.168.2.199. Under scope options the router is set to 192.168.2.1 and DNS Servers is set to 192.168.2.2 (the ip address of the domain controller). When I try to add the computer it cannot contact the domain controller. Is there something wrong with my DHCP config or DNS?
View 3 Replies View RelatedAD Domain Controller Concurrent Logons?
Nov 30, 2011I am currently planning a Active directory deployment. It will most likely be a new forest, but the domain could become part of a existing forest. I have about 45 Computers with about 85 users. At one time there is about 42 users logging in as there is two shifts. The logons will be done all at once. Do you think two domain controllers will be able to handle the load?
View 9 Replies View RelatedHow To Create A Domain Host Controller For Xp
Apr 11, 2012o create a domain host
View 2 Replies View RelatedFile Server And Domain Controller?
Nov 22, 2012How has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedSQL Server Lost Connection With Domain Controller
Dec 6, 2011I have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies View RelatedDomain Controller - Local Network Not Working?
May 4, 2011we have using 10 system with domain contorller connected to network once disconnect server i cant acces to local systen ( per to per )
View 1 Replies View RelatedHome Network :: Primary Domain Controller Behind A Router?
Apr 15, 2013what i am trying to accomplish is to set up a domain for my home network. the domain is going to consist of 2 server boxes both running ubuntu 12.10 server edition and a client machine running windows XPone linux box will be my DC using samba and the other will host email, and apache2 web services.i dont know if you need all of this info but in my experience its best to be thorough.I registered a domain through godaddy.com and made it point to my home IP address. now what happens because all of my machines are behind a router is when i type in my URL it brings up the login request for the cicsco webinterface. what i would like to happen is that my router points traffic to the ip address on my home net work 192.168.1.XXX that is hosting the apache2 webserver.I would also like to connect the client(XP) machine to the domain controller but i keep getting an error that says that the domain does not exist. I have been through the samba settings and they are exactly the same as when i set them up for a mock PDC using "example.com" as a domain name
View 1 Replies View RelatedConvert Additional Domain Controller After Formatting Server
Nov 15, 2012My Primary Domain Server is down and i have to format the server. I have 2 Additional domain controllers. How do I add DC after formating the server in the same domain.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ASC5.2 - How To Tell Which Domain Controller Request Is Sent
Sep 12, 2011Within ACS 5.2, does any know of a way to see which specific domain controller a request is sent to?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Force ACS V.5 To Join Domain With Certain Controller?
Sep 5, 2012I try to join an ACS v. 5.3 to the domain. For my acs in Location A, I can join without problems using my account. When I try to join the ACS in location B to the same domain with the same account, it doesnt work.I looked at the debug log files for the ad client, and noticed, that the ACS in location B goes to a certain Domain Controller. However, I would have expected the ACS to contact another DC, which is located on the same location as the ACS ... this doesnt happen.
My question: How does the ACS determine what DC to contact ? Is it possible to force the AC to join by connecting a certain DC ?
HP 5500G-EL Switch - Replacing Domain Controller With Something More Lightweight
Apr 24, 2013We have a remote site with ~5 users, 4 IP phones and a network printer. Right now we have an old Win2003 box serving as the DC for that site. It is connected back to us via 10MB layer 3 routing on a HP 5500G-EL switch. This windows server is getting quite old and I'd like to avoid the expense of buying a new server just to hand out addresses and authenticate users. How do you all handle login authentication,dns,and DHCP for your lightweight remotes sites?
View 11 Replies View RelatedCisco Switches :: Internet Routing With SG300-20 And Domain Controller
Nov 27, 2011I am trying to set up the SG300-52 and am struggling, I have a domain controller with IP address 192.168.0.1 I have a broadband router that is has a dynamc ip address. I have set up vlan1 aand vlan2
Vlan1 is getting its ip address from the domain which is 192.168.0.110
vlan2 is getting its ip from the broadband router.
I have setup Domain Name System in the Ip configuration tab
on Vlan1 I have a connected a dumb switch this connects all the computers in the local network. What I cannot get to work is the internet vlan.
who has setup up vlan routing with domain controller
AAA/Identity/Nac :: ASA5510 Entry For LDAP Object That Refers To Domain Controller
Feb 14, 2013On our ASA5510 in the area AAA Server Groups, there is an entry for LDAP and an object that refers to our 2003 Domain Controller. This DC has LDAP over SSL enabled and I can see the DN and Password for a domain user account.I've created two new DC's, both R2 2008 but when I enable these in the same way it says it could not authenticate, ERROR auth server not responding, AAA group removed.I thought this had something to do with CA being installed on a DC, but it's not running as a service on the DC that was already referred to.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.1.4 Any Version With Domain Controller On Windows Server 2008 R2
Feb 28, 2010Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
View 5 Replies View RelatedCisco Switching/Routing :: 7000 Domain Controller IP To Be Allowed For DHCP Relay
May 2, 2013I have a Nexus 7000 Core Switch , and i need to allow the domain controller ip 10.x.x.x for DHCP relay on switch.
View 2 Replies View RelatedCabling / Cards :: SBS 2003 Domain Setup?
Feb 21, 2011The network seems to be working alright but we did have trouble with the internet on client machines being slow and timing out all the time.After a lot of trouble shooting I ended up changing the forwarders to OpenDNS instead of the ISP DNS and everything thing seems to be working now.
View 6 Replies View RelatedServers :: Can Use Apache Server To Setup A Domain Name For Intranet
Aug 7, 2012Differences between using an Apache server on a regular laptop vs. a whole operating system like Windows Server 2008. I'd like to setup an intranet complete with an internal domain name. Is this possible with Apache or do you have to use a complete server operating system like Windows server 2008?
View 1 Replies View RelatedCisco Routers :: Setup RV042 VPN To Connect To Domain
Apr 5, 2013We are currently running Windows 2003 Domain in our network with DHCP turned on the Server. We have turned off the DHCP on the Router. We are using RV042 as out Gateway to the internet and everything is working fine. We would like to allow a couple of our users to be able to VPN into the network so that they can use Outlook and be able to access their files on the Shared Folder. The users would be using their laptops from their homes to connect via VPN using the standard Windows 7 VPN connection.
In the RV042 Interface there are many options and I am not sure I understand which setting would allow them to connect successfully to the network, be authenicated as a domain user.
H3 Wx5004 Setup H3c Wireless Controller
Feb 16, 2012I have a h3 wx5004 wireless controller, I want to setup as such that the wirless clients could be Authenticated using domain credentials. I am using RADIUS and as far as my understanding , i have completed all the steps to make it work, but still it doesn't work.I have configured RADIUS Server on win 2008 R2 with proper settings with AD and certificates.
View 5 Replies View RelatedMSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?
Jan 10, 2013i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
Cisco Wireless :: How To Setup 5508 Series LAN Controller
Sep 23, 2010how to setup the 5508 Series LAN wireless controller. The online documentation are not details. What different between Service Interface IP and Management interface IP. The device IP is using what type service or management interface.
View 2 Replies View RelatedCisco Wireless :: WLC 2504 - Setup Guest Wi-Fi On Controller?
Jun 4, 2012I have setup guest access on the controller and this is not working at the moment.
DHCP server setup on the controller for the Guest users.
You are able to connect (get ip address from controller) and the browser gets redirected to 1.1.1.1 but then page can not be displayed instead of the login page.
Cisco :: 5508 Controller Setup - Management Interface
Jan 2, 2012I'm trying to verify some behaviors I'm seeing with my 5508 controller setup, I've zero experience with this hardware and clueless on the best practices. With that said... out of the box I ran through the AutoInstall process.
I gave my service port an IP address on my subnet, 10.10.8.0/24 vlan 100 and gave the management interface the ip address 10.10.30.5/24 vlan 130
From my host I can ping the management interace 10.10.30.5 and the interface gateway 10.10.30.1
I cannot connect to the controller via 10.10.30.5 either through the web GUI or telnet
I can connect to the controller via 10.10.8.200 both through the web interface and telnet
while connected to the service port, I can ping the management port IP but I cannot ping the 10.10.30.1 gateway.
We have attached two test 3502I AP's and they found the controller and pulled correct ip addresses, clients can authenticate and access network resources as well as the Internet so for the most part, things are working but it concerns me that the management interface can't ping its own gateway.
Linksys Wireless Router :: Wrt54gs / Setup Local DNS Server To Manage Small Office Local-only Domain Names?
Apr 22, 2012i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View Related