We have cross domain trust relationship established and I have added the user group in our ACS 5.1. we are using Active directory as an external Identity store. Also I have created a rule in the 'Access polices' to allow the user group. From the cross domain, I use abc@xxx.xyz as a user id, but I get this error message 13036 Selected Shell Profile is DenyAccess.
View 3 Replies
We have configured ACS 5.1 for autenticating wireless users with active directory, which is working fine now.But we would like implement that single user should be authenticated through ACS . If any user try to access WLAN from multi system will be notified with multi login access restriction.Can we implement this policy in acs, if possible what are the exact configuration changes we have to implement.
View 1 Replies View RelatedI`ll get straight to the point. I have at work a domain of computers. on one of the computers (I have admin rights) I want to share a folder that can be accessed by other computers that are not in the domain. By default accessing that share requires a user/pass. My question is: can I configure something on the computer (running windows 2008 server) to the shared folder so that other computers that are not from the domain will gain access to without user/pass requirement (like a normal share)?
View 3 Replies View RelatedI have a remote access VPN profile configured on an ASA 5540. This profile is almost identical to the same profiles configured on other ASA 5540. The profile is linked to Active Directory for authentication. For some reason, users are not being prompted for the domain name field when connecting to the firewall, on the other firewalls they get prompted for all three (user/pass/domain).
All the firewalls are running 8.0(4) 32. And the following is the configuration of the firewall that I am experiencing issues with:
ip local pool TESTVPN 10.244.124.1-10.244.127.254 mask 255.255.252.0
group-policy TESTCERT internal
group-policy TESTCERT attributes
banner value **** WARNING ****
banner value You are Now Successfully Connected (code)
I have acs 4.2 for windows installed on a windows server 2003 box, because of a merger I need to now authenticate against 2 different domains, there is a bidirectional trust between the two domains and the dial-in permission has been set in ADUC but whenever I try to authenticate a user it says dial-in permissions needed in the acs failed authentication log.
View 5 Replies View RelatedI'm installing ACS4.2 in our lab domain and want to leverage the corporate domain for authentication. The one way trust is in place, but there is a facet that I'm not clear on in regards to the installation requirement.
I'd like to install ACS on a lab domain member server, but I'm not sure that will work. The installation docs seem to imply that a member server must be in the same domain as the authentication server, but its not very clear. if I want to use the one way trust to the Corporate Domain, am I required to install ACS on the domain controller of the Lab Domain?
I am trying to setup up a rule to allow wireless access only to users in my AD when they use computers from my AD.I have Machine authentication working on it's own (computer boots up and connects to wireless - confrimed by ACS logs) I have User authentication working But when I try to creat the floowing rule:it does not work.
Access Policy
Access Service:
Default Network Access Identity Store:
AD1
Authorization Profiles:
DenyAccess
Exception Authorization Profiles:
Active Directory Domain:
[code]....
Everything seem to fine until it gets to the last rule.
I have only one PC. I use cross cable for setup Domain controller. Than network icon show available network but it is just only send and can't received.
View 1 Replies View RelatedI want to have a local user in ACS that is permitted to login to routers. I have TACACS with AD already working but cannot get a local user to work. I used to do this in ACS 4.x.I created a user in the internal identity store.I tried configuring a policy to allow this users TACACS authentication multiple ways to no avail. I cannot find a config example doc and cannot figure it out from the user guide as the documention is sorely lacking.
View 5 Replies View RelatedCan use ACS 5.2 as Guest user authentication server?
View 3 Replies View RelatedI am using ISE 1.1.3.124.My first question:I want to know the relation between the attribute "WasMachineAuthenticated" and the MAR (MAchine access restriction in advanced setting for AD).Is-it the same or not ?Once you time out, you need to do machine auth again. What is the timer ?Using the attribute "WasMachineAuthenticated", is-it the same timer that you configure in MAR ? In a distributed environnement, is the information about machine previously authenticated replicated to all policy node ?Because, if a swicth has 2 radius-server, we are not sure that it will point everytime to the same server.
View 1 Replies View RelatedFor our wireless, we enabled the machine authentication, but we want to bind the machine authentication and user authentication together which means they need to meet both requirements to access the wireless, how can we do this? Right now looks like as soon as the machine is authenticated, it can access the network, no user authentication needed.
View 6 Replies View Relatedhow do i configure user authentication via TACACS on UCS 1.4 with ACS 5.2? My TACACs connection works, and my user authentication is successful, but i can only get read-only rights. I have tried several versions of "cisco-av-pair= role=admin" both as mandatory attributes named role and as cisco-av-pair=role , with "admin" as the value, and i still get read-only.
When i attempt to find any documentation, it only describes ACS 4.2, which is another problem i have with most documentation for new cisco products (i have this exact issue with my NAMs, nothing i do to change the attributes results in successfully logging into the NAM, and all config guides are written in 4.2 speak).
is there any possiblity cisco is going to release some documentation on how to convert 4.2 speak to 5.2 speak?
I am migrating from ACS 4.2 to 5.2. In 4.2 you could assign one user to auth via Internal Database and another user to auth via Radius Token Server. I cannot find how to do this with 5.2. There is a note in the doc that states 'Identity-related attributes are not available as conditions in a service selection policy'. Does this mean that you can only choose one auth method for all users? If it is possible to have multiple methods, how am I able to accomplish this?
View 1 Replies View RelatedWhile configuring LDAP , I got struck in “Step 3 - Directory Organization”. How to make this work? My aim is to make users authenticated from their windows domain usernames and passwords while they log in to AAA clients.
View 1 Replies View RelatedI have some queries regarding on the report generation for on Cisco ACS v5.2.
1) Can we schedule to run a customized report on ACS and then email the report to the user?
2) Can we run a users authentication trend report based on the AD directory group rather than individual user.
3) Can we configure user authentication logs to be viewed on WCS.
I have setup ACS 5.2 in my lab and have it completely funcation with Downloadable ACLs, Dynamic VLANs and the identity store on the backend is Active Directory. I need it to lock a user account in AD if there are to many auth attempts. I have gone into AD and set a max login attempts to 3 but if I continue to fail authentication (on purpose) using radius auth, it never locks out my AD account? I am using the Anyconnect 3.0 with NAM as the supplicant installed on my workstation. I have also configured the switchport that I am connect to with the following commands. I tried the dot1x max-reauth-req 3 command and that didn't really do anything for me either. What am I missing here?
switchport mode access ip access-group 10 in authentication event fail action authorize vlan 40 authentication event no-response action authorize vlan 40 authentication host-mode multi-host authentication priority dot1x mab authentication port-control auto authentication timer reauthenticate 10 authentication timer inactivity 20 authentication violation protect mab dot1x pae authenticator dot1x timeout quiet-period 5 dot1x timeout tx-period 5 dot1x max-req 3 spanning-tree portfast
I have a Active Directory user that cannot log onto any computer that's on my organizational domain. The error is "You cannot log on because the logon method you are using is not allowed on this computer"
View 5 Replies View RelatedWe are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies View RelatedWe have a computer running Windows 2000 Pro that used to connect to a domain at work. Upon bootup, it asks for the user/password.Yesterday we tried to connect it to a little home network by changing the domain to a workgroup with a different name (network name that i used at home) as well. Now when it boots up, asks for a user/password, but now it does not recognize my user name and password.I can log in as an administrator to the Workgroup with the new name. but i cannot access the old Domain with its user and passwords. I tried to change back to the old name and to domain, but when doing that i get and error messsage which says: The following error occurred validating the name "xxxxxxx" (network name that I use at home) this condition may be caused by a DNS lookup problem. so I'm not sure if a should run the clear DNS cache. and if in doing that I'll be able to restored it back to the stage that i was before I made the changes.
View 1 Replies View RelatedWe have shared network drives on my network whose folder structure must not change. We have users who must have full access to the contents of these folders and be able to read/modify/erase and create new files inside these folders. However, the structure of the folders must not change so that other users/programs can locate files within these folders.
Some users sometimes "aggressively click" and drag and drop folders into different locations and can't remember where they dropped them. This makes them inaccessible for other users. We have a lot of folders so I implemented FileWatcher Simple program to monitor these folders and if there is a change in folder structure I get an email with an attached log. The log tells me which folders got created/deleted/renamed and I am able to restore the folder structure if need; but I cannot see who caused these changes.
1. Is there a way for me to see which user in my domain modified the folders?
2. Is there a way to disable users from drag and dropping, deleting, renaming folders yet still maintain full access to the files within these folders?
how to find the current logged on user on a domain network? I tried nbtscan but it gives me ip address, machine name and mac address. In the server column it gives <server> and in the user name column it give <unknown>.
View 1 Replies View RelatedWe had a power outage that kicked off our server and our network switch (2008R2, Cisco2960), before we could get it back up, a user was able to log into his laptop.
The user used the domain login - not the local machine account - he obviously wasn't able to access any shared resources, but how did he log in with a domain account, when the server and switch were both off?
I started getting into IT (as a job) a little less than a year ago, though I've been working with computers for close to 20. So networking was never something I was into while working on computers at home. I've been handed a significant position at work and I am learning a lot as I go. I want to know how to grant permissions for a domain user to a directory without adding the user to all of the sub-directories and directories. The only way I've figure thus far is to grant permissions to said folder, then inside remove the "inherit permissions..." but then I have to manually remove the permissions to every other sub-folder.I want to add a single path to a folder by adding single permissions to each folder until the directory in question is reached.
View 2 Replies View Relateduser can't login into domain with right credentials in active directory
View 6 Replies View RelatedI have a desktop without a wireless card and i want my network to be wireless so i bought a d-link wireless card for the desktop, the system then discover the wireless network but could not connect it kept on trying to authenticate, it did not even ask me for the web security key, what do I do
View 1 Replies View RelatedI am trying to setup a VPN with AnyConnect on my ASA5510 and it works fine. I have setup an AAA server group for my Active Directory with the "NT Domain" protocol". Right now, every user is able to connect with their Active Directory credentials. I would like to restrict access to the Anyconnect VPN to only a few users in AD.
View 1 Replies View RelatedA wireless router linksys has been installed but the internet through that wireleless works only if i type the proxy on the IE browser and authenticate with domain
View 1 Replies View RelatedWe are changing our old Pix 515e this weekend and for brand new ASA 5510.With this new installation, I would like to implement the Radius authentication for remote vpn user. Changing the firewall of the company has many impact and for the first phase the user will keep authenticating locally but I need that in phase 2, they will be authenticated via a radius server.Is there a way to configure both authentication for remote vpn user?
All user will be authenticated locally except the member of the IT Department who will be authenticated by the radius server for testing.I have remote vpn users around the world so I do not want these users to be blocked by the testing of the radius authentication. What I want is that users in group1 will be authenticated locally on the ASA and users in group2 will be authenticated by the radius. When testing will be done, all users will be transfer to the radius authentication gradually.
I configured before ACS v4.2 to authenticate network devices using internal users at first, and if the user is not found use AD list users. But with v5.3 I have some problems doing this, on identity policies I use rule based result selection option, I configured 2 polices for Identity source, one for Internal Users and other policy for AD user, but it only works with the first policy, internal users or AD, but works only for the first policy identity. how to do that, if the user is not found on first policy, continue to the next policy.
View 7 Replies View RelatedI need a specify users to allow access to particular devices and give privilege only for show command or show run. Here is how I tried to configured.
1. Configured two seperate Shell Profile and Command set with privilege level 4-5 and allowing only show run command
2. create seperate service selection rule with adding the require NDG and protocol TACACS and maching service "RestrictAccess"
3. In the RestrictAccess Service I have following configured; Identity: internal users, Group Mapping to a particular group where the user exists, authorization: matching the above created identity group, NDG, shell profile, command sets
All the steps are attached in the .doc file. However when I tried with the particular user he is able to access everything and he is not hitting the correct access rule.
On our guest wireless, at times when a user shuts down their laptop and powers back up they are not asked to re-authenticate.The only security is a login and password then the user is tunneled to our 440 in our DMZ then out the internet pipe.My question is if the user shuts the laptop off then starts it back up shouldn't they be prompted for the user login and password?
View 2 Replies View RelatedI would like to configure RADIUS authentication and authorization in ASA 8.2 (ADSM 6.2) by configuring Cisco anyconnect VPN client connection profile.So the end result would be user enters his username, password and a token in any connect client, then the RADIUS server validates this information and sends the user attributes to ASA upon successful authentication.I would be grateful if i can get the step by step procedure to achieve this:The below is what iam trying to do:
1) Create an AAA server group.
2) Add the AAA server to this group (here its RADIUS).
3) create an LDAP-cisco ASA group mapping (for authorization)
3) Add a group policy and create IP pool. (We can add two types of group policies, one is internal and external. Not sure which one to select here).
4) create a any connect vpn client connection profile. Here we specify the created server group name, IP pool and group policy.(While creating a connection profile, it asks us to select an interface. As of now i have only one interface which is "inside". Not sure what the interface "outside" means).
