On our guest wireless, at times when a user shuts down their laptop and powers back up they are not asked to re-authenticate.The only security is a login and password then the user is tunneled to our 440 in our DMZ then out the internet pipe.My question is if the user shuts the laptop off then starts it back up shouldn't they be prompted for the user login and password?
View 2 RepliesLogon failure: The user has not been granted the requested logon type at this computer" Im having this same problem on two computers. One running windows vista ultimate 64bit and windows 7 home premium 32 bit to windows server 2008 r2 64 bit?
View 3 Replies View RelatedWe are changing our old Pix 515e this weekend and for brand new ASA 5510.With this new installation, I would like to implement the Radius authentication for remote vpn user. Changing the firewall of the company has many impact and for the first phase the user will keep authenticating locally but I need that in phase 2, they will be authenticated via a radius server.Is there a way to configure both authentication for remote vpn user?
All user will be authenticated locally except the member of the IT Department who will be authenticated by the radius server for testing.I have remote vpn users around the world so I do not want these users to be blocked by the testing of the radius authentication. What I want is that users in group1 will be authenticated locally on the ASA and users in group2 will be authenticated by the radius. When testing will be done, all users will be transfer to the radius authentication gradually.
I would like to configure RADIUS authentication and authorization in ASA 8.2 (ADSM 6.2) by configuring Cisco anyconnect VPN client connection profile.So the end result would be user enters his username, password and a token in any connect client, then the RADIUS server validates this information and sends the user attributes to ASA upon successful authentication.I would be grateful if i can get the step by step procedure to achieve this:The below is what iam trying to do:
1) Create an AAA server group.
2) Add the AAA server to this group (here its RADIUS).
3) create an LDAP-cisco ASA group mapping (for authorization)
3) Add a group policy and create IP pool. (We can add two types of group policies, one is internal and external. Not sure which one to select here).
4) create a any connect vpn client connection profile. Here we specify the created server group name, IP pool and group policy.(While creating a connection profile, it asks us to select an interface. As of now i have only one interface which is "inside". Not sure what the interface "outside" means).
I want to have a local user in ACS that is permitted to login to routers. I have TACACS with AD already working but cannot get a local user to work. I used to do this in ACS 4.x.I created a user in the internal identity store.I tried configuring a policy to allow this users TACACS authentication multiple ways to no avail. I cannot find a config example doc and cannot figure it out from the user guide as the documention is sorely lacking.
View 5 Replies View RelatedI have a WLC 2106 and 1242AG.it's a hotspot configuration.So in WLC, under controller tab, i have set my ap-manager ip, my management ip, my virtual ip (1.1.1.1) and my hotspot network range ip.I set also a DHCP range for the hotspot network.
In Wlans tab, i set my hotspot wlan, with no layer 2 security and for layer 3, i set none for layer 3 security and i use web policy authentication.I use local authentication and i created under security menu, under AAA tab, 3 local net users.
From pc number 1, i get ip from dhcp, and i have authentication web page, authentication is ok and i can surf on web.From pc number2, when user 1 from pc 1 is connected, i get ip from dhcp but i have not the authentication web page, i have not DNS resolution.when i try https:1.1.1.1/login.html, i have no answer.
And when user 1 is de-authenticated, the user 2 can surf on web.So only one user can surf at the same time. not good for a Hotspot.
I am trying to setup up a rule to allow wireless access only to users in my AD when they use computers from my AD.I have Machine authentication working on it's own (computer boots up and connects to wireless - confrimed by ACS logs) I have User authentication working But when I try to creat the floowing rule:it does not work.
Access Policy
Access Service:
Default Network Access Identity Store:
AD1
Authorization Profiles:
DenyAccess
Exception Authorization Profiles:
Active Directory Domain:
[code]....
Everything seem to fine until it gets to the last rule.
Can use ACS 5.2 as Guest user authentication server?
View 3 Replies View RelatedI am using ISE 1.1.3.124.My first question:I want to know the relation between the attribute "WasMachineAuthenticated" and the MAR (MAchine access restriction in advanced setting for AD).Is-it the same or not ?Once you time out, you need to do machine auth again. What is the timer ?Using the attribute "WasMachineAuthenticated", is-it the same timer that you configure in MAR ? In a distributed environnement, is the information about machine previously authenticated replicated to all policy node ?Because, if a swicth has 2 radius-server, we are not sure that it will point everytime to the same server.
View 1 Replies View RelatedI would like to be able to have a few "guest" users on the Wireless network for visitors. Is there any method to have a prompt for "Username / password"? I would like the user accounts to have different expiry periods if this is possible. My current config is attached. The SSID "test" appears on the network. The SSID "test111" does not appear.
View 1 Replies View RelatedFor our wireless, we enabled the machine authentication, but we want to bind the machine authentication and user authentication together which means they need to meet both requirements to access the wireless, how can we do this? Right now looks like as soon as the machine is authenticated, it can access the network, no user authentication needed.
View 6 Replies View Relatedhow do i configure user authentication via TACACS on UCS 1.4 with ACS 5.2? My TACACs connection works, and my user authentication is successful, but i can only get read-only rights. I have tried several versions of "cisco-av-pair= role=admin" both as mandatory attributes named role and as cisco-av-pair=role , with "admin" as the value, and i still get read-only.
When i attempt to find any documentation, it only describes ACS 4.2, which is another problem i have with most documentation for new cisco products (i have this exact issue with my NAMs, nothing i do to change the attributes results in successfully logging into the NAM, and all config guides are written in 4.2 speak).
is there any possiblity cisco is going to release some documentation on how to convert 4.2 speak to 5.2 speak?
I am migrating from ACS 4.2 to 5.2. In 4.2 you could assign one user to auth via Internal Database and another user to auth via Radius Token Server. I cannot find how to do this with 5.2. There is a note in the doc that states 'Identity-related attributes are not available as conditions in a service selection policy'. Does this mean that you can only choose one auth method for all users? If it is possible to have multiple methods, how am I able to accomplish this?
View 1 Replies View RelatedWhile configuring LDAP , I got struck in “Step 3 - Directory Organization”. How to make this work? My aim is to make users authenticated from their windows domain usernames and passwords while they log in to AAA clients.
View 1 Replies View RelatedWe have configured ACS 5.1 for autenticating wireless users with active directory, which is working fine now.But we would like implement that single user should be authenticated through ACS . If any user try to access WLAN from multi system will be notified with multi login access restriction.Can we implement this policy in acs, if possible what are the exact configuration changes we have to implement.
View 1 Replies View RelatedWe have cross domain trust relationship established and I have added the user group in our ACS 5.1. we are using Active directory as an external Identity store. Also I have created a rule in the 'Access polices' to allow the user group. From the cross domain, I use abc@xxx.xyz as a user id, but I get this error message 13036 Selected Shell Profile is DenyAccess.
View 3 Replies View RelatedI have some queries regarding on the report generation for on Cisco ACS v5.2.
1) Can we schedule to run a customized report on ACS and then email the report to the user?
2) Can we run a users authentication trend report based on the AD directory group rather than individual user.
3) Can we configure user authentication logs to be viewed on WCS.
I have a remote access VPN profile configured on an ASA 5540. This profile is almost identical to the same profiles configured on other ASA 5540. The profile is linked to Active Directory for authentication. For some reason, users are not being prompted for the domain name field when connecting to the firewall, on the other firewalls they get prompted for all three (user/pass/domain).
All the firewalls are running 8.0(4) 32. And the following is the configuration of the firewall that I am experiencing issues with:
ip local pool TESTVPN 10.244.124.1-10.244.127.254 mask 255.255.252.0
group-policy TESTCERT internal
group-policy TESTCERT attributes
banner value **** WARNING ****
banner value You are Now Successfully Connected (code)
How i can use both LDAP Authentication and local user database to authenticate the remote vpn clinet in asa 5505?
when i try to do the things either only one method is working both are not working at a time.
I have setup ACS 5.2 in my lab and have it completely funcation with Downloadable ACLs, Dynamic VLANs and the identity store on the backend is Active Directory. I need it to lock a user account in AD if there are to many auth attempts. I have gone into AD and set a max login attempts to 3 but if I continue to fail authentication (on purpose) using radius auth, it never locks out my AD account? I am using the Anyconnect 3.0 with NAM as the supplicant installed on my workstation. I have also configured the switchport that I am connect to with the following commands. I tried the dot1x max-reauth-req 3 command and that didn't really do anything for me either. What am I missing here?
switchport mode access ip access-group 10 in authentication event fail action authorize vlan 40 authentication event no-response action authorize vlan 40 authentication host-mode multi-host authentication priority dot1x mab authentication port-control auto authentication timer reauthenticate 10 authentication timer inactivity 20 authentication violation protect mab dot1x pae authenticator dot1x timeout quiet-period 5 dot1x timeout tx-period 5 dot1x max-req 3 spanning-tree portfast
I would like to configure the below setup:
End user client (Cisco Any connect/VPN client) -> ASA 5500 (AAA client) -> ACS server -> External RADIUS database.
Here ACS server would send the authentication requests to External RADIUS server.So, i have added the external user database (RADIUS token server) in ACS under External databases.I have added AAA client in Network configuration (selected authenticate using RADIUS(VPN 3000/ASA/PIX 7.0) from the drop down.
Here how do i make ASA recognize that it has to send the request to ACS server. Normally when you use ACS as RADIUS server you can add an AAA server in ASA and test it.But here we are using an external RADIUS server which has been configured in ACS, so how do i make ASA to send the requests to ACS server?
how to set WLC 5508 to allow single create web authentication user account to get connected in a same time. i found that i can use the same username and password combo to be login in 2 machine in the same time.
View 4 Replies View RelatedI`ll get straight to the point. I have at work a domain of computers. on one of the computers (I have admin rights) I want to share a folder that can be accessed by other computers that are not in the domain. By default accessing that share requires a user/pass. My question is: can I configure something on the computer (running windows 2008 server) to the shared folder so that other computers that are not from the domain will gain access to without user/pass requirement (like a normal share)?
View 3 Replies View RelatedE2000 has the guest account feature. Not sure if all guests shares the same login credentials. I would like to have guests account use seperate logins. Is this feature available? Another thing, I read the manual and it is indicated that only up to 10 maximum guest acccounts is allowed. I am looking for more than 10 - kinda like a hotspot software.
I've been looking everywhere. I've seen hotspot system, ddwrt, chillspot, etc. But it's complicated as firmware needed to be flashed.
I have been striving to improve and impact my English. But when I tried to watch Tv channels such as CBS. İt says 'The video you requested is not available for your geographic region'.
View 1 Replies View RelatedCan't figure out how to setup computer to access the internet. When I click on Internet Explorer the error is "Web page you requested is not available offline
View 1 Replies View RelatedI have a problem after upgrading the ASA5505 unlimited to 8.4.1, the message shown after startup is:IO memory blocks requested from bigphys 32bit: 9672 It has 512 Mb of ram and this is the view from sh ver:
Cisco Adaptive Security Appliance Software Version 8.4(1)
Device Manager Version 6.4(1)
Compiled on Mon 31-Jan-11 02:11 by builders
System image file is "disk0:/asa841-k8.bin"
Config file at boot was "startup-config"
[code]....
to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 Replies View RelatedI have a WRT160N that I used just once after purchase (my ISP gave me a wireless router). I could not remember the PW, so I reset. (The computer saw the old router name but I had no PW)When I run the software (CD that came with the product says 150N), it get to "configuring computer" and stops there.I tried downloading the software, but when I try to run it says "Application requested runtime to terminate in an usual way."When I go to the 192. URl and try to login using a bank user name and 'admin," it jsut keep bringing up the password box.
View 2 Replies View RelatedThe Lg840g is a tracfone with wifi capability. I get strong wifi signal and connection at home, but receive failure to connect to requested host message when I open the browser. This phone works at wayport wifi, so I assume it's a compatibility problem with the router. Is there a fix? (Router works great with our Acer and Kindle tablets though.)
View 1 Replies View RelatedWe are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies View RelatedWe are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
I want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies View Related