Cisco VPN :: ASA5500 - User Authentication ACS By Adding External RADIUS Database
Feb 28, 2012
I would like to configure the below setup:
End user client (Cisco Any connect/VPN client) -> ASA 5500 (AAA client) -> ACS server -> External RADIUS database.
Here ACS server would send the authentication requests to External RADIUS server.So, i have added the external user database (RADIUS token server) in ACS under External databases.I have added AAA client in Network configuration (selected authenticate using RADIUS(VPN 3000/ASA/PIX 7.0) from the drop down.
Here how do i make ASA recognize that it has to send the request to ACS server. Normally when you use ACS as RADIUS server you can add an AAA server in ASA and test it.But here we are using an external RADIUS server which has been configured in ACS, so how do i make ASA to send the requests to ACS server?
View 6 Replies
ADVERTISEMENT
Jan 16, 2012
Is it possible to create on ACS5 rule which will:
1. Try to authenticate user in external database1 (radius)
2. When external database1 returns FAIL (because of bad password) ACS5 should try to authenticate user in another external database2 (radius)
View 5 Replies
View Related
Mar 9, 2012
Having CSACSE-1113-K9 with ACS 4.2.15.I want to configure windows user database under extrenal user database but i get an error (attached) 'An error has occured while processing the Authen DLL Configure pagebecasue an error occured.I tried to stop the services and start agian but the same issue. The eappliance is secondary (backup) ACS. On the primary it is working fine.
View 1 Replies
View Related
Mar 14, 2011
How i can use both LDAP Authentication and local user database to authenticate the remote vpn clinet in asa 5505?
when i try to do the things either only one method is working both are not working at a time.
View 3 Replies
View Related
Jun 21, 2006
We have a 1231 AP and a Freeradius Server.Now we are using MAc authentication.The thing is that the AP sends two parameters to the RADIUS:
User-Name = "000ff855df2e"
User-Password = "000ff855df2e"
both are the MAC of the wireless client.I want that the AP send:
User-Name = "00-0f-f8-55-df-2e"
User-Password = "mykey"
Note that the MAC is dash separated and the password is forced to the key that I want.
View 2 Replies
View Related
Jul 3, 2007
I follow step by step the link bellow to configure web-auth with external RADIUS server but I receive a error on console debug of the WLC "Returning AAA Error No Server (-7) for mobile"My Radius Server is fine, because I can authenticate on WLC Web page with RADIUS user. WLC 4402 version 4.1.171.0 [URL]
View 2 Replies
View Related
Feb 27, 2011
I am trying to configure ACS 5.1 to authenticate SSL VPNs on an ASA5500 and aslo to provide admin access to the ASA5500 both via radius.I want to authenticate the VPN against a SeureID appliance and the admin login against a different database (using internal for testing but will use LDAP in the end).I cant seem to get the ACS to distinguish between the two authentication types. If I create a rule that says match protocol radius I can point that at either database but if I try saying match radius and service type 5 it doesnt match the VPN and falls through to the default authentication service. I have also tried matching service type 6 for admin and that doesnt seem to work either.In the end what I want to acheive is to authenticate teh ASA5500 VPN against the SecureID appliance and then admin access to all devices on teh newtork (a mixture of Cisco, F5 and Juniper) to active directory via LDAP where if the user is a member of the "admin" group they get access.I was intending to use specific devices for the ASA5500s (there aretwo) and then creat a device group based on IP address range for everything else.
View 4 Replies
View Related
Apr 10, 2011
I am trying to configure ASA to assign same static ip address to certain user(User1) every time when he connect to network via AnyConnect client. We have Windows AD and use LDAP AAA server for authentication of VPN Remote Access users. I found in document "Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2" in section "Configuring an External Server for Security Appliance User Authorization" explanation and configured ASA and User Properties in AD on exectly same way:First, I assigned static ip address in properties menu(dial in section) of User1 in Active Directory. Then I created ldap attribute map where I mapped msRADIUSFrameIPAddressattribute to IETF-Radius-Framed-IP-Address attribute. At the end I applied this ldap attribute map to AAA server group LDAP.
Although I set this up, whenever I connect using User1 credentials from AD I still get ip address from vpn pool instead static ip address that I configured. In output of debug ldap 255 command I found line "msRADIUSFramedIPAddress: value = -1062718956" but not any line that prove mapping above mentioned attributes.It seems like mapping is not working.All AnyConnect users get parameters from defined internal group policy on ASA,including addresses form pool,dns server etc. I want that User1 get static ip address and inherit all other parameters from group policy.
View 4 Replies
View Related
Jul 24, 2012
I am designing wireless controller solution for one of our customer network with Cisco 5500 series controller, wireless client authentication part.
1. There are 25 departments around the campus, each will be given one or two access points.
2. One Cisco AIR-CT5508-50-K9 Controller shall be used.
3. Single SSID/ VLAN shall be used for entire campus.
4. Wireless Authentication credentials used by one department shouldn’t work for other department
View 7 Replies
View Related
Jul 31, 2012
on the dashboard of the "Monitoring & Report Viewer" I see a lot of system alarms related to the database.The explanation of the alarm says to look at the Collector logs for the details.
View 3 Replies
View Related
Sep 27, 2012
I am working on project with Secure ACS 5.2. I am trying to determine the proper External Database to use. LDAP or direct to AD?
Additionally, the Domain that I am connecting to has Multiple sub domains. All of the users are currently in the Sub domains, but will be moving to root domain later. How should I configure the connection, do I need to connec to each sub domain or can I just connect to the root?
View 2 Replies
View Related
Jul 4, 2011
I have a hosted web server that has a website on it that needs to connect back to a database within our internal network. We have a Cisco WRVS4400N Wireless Router with 2 VLANS. VLAN 1 goes to a Watchguard Firebox which is connected to our internal network. VLAN 2 goues to our classroom network.
Our database is on VLAN 1. I have opened port 1433 on the Watchguard to allow SQL traffic from our Web Server. I can telnet from my workstation on VLAN 1 to the Web Server over port 1433, so I know the Web Server is not blocking anything. When I try to telnet from the Web Server to our Public IP address over port 1433, it fails.
I believe I have the firewall on the Cisco WRVS4400N off, so it shouldn't be blocking any traffic, but for the life of me I can't get this to work. I have been working on this for two days, and I NEED it to work. This was working up until last week, then it quit working. I am the only person making changes to our network, and there were no changes made during that time.
View 1 Replies
View Related
Mar 27, 2011
Firstly the ACS 4.2.1 for Windows database replication does any one have and documentation on the processes required?Secondly I have a single system installed which is providing TACACS authentication for management access to a Cisco 5508 WLC, the controller prompts with a login box on connection to the web interface. When you put in the username and password pair the box comes back as if the authentication has failed. On the ACS I was unable to see any failed authentications so enabled passed authentication reporting and can see the user passing the process. The WLC is running software version 6.0.199.4. On the ACS I have added the extra two options within the TACACS interface configuration and have a ‘role1=all’ against both the user and the group the user is part of so I am confused as to why the user is still denied access.
View 3 Replies
View Related
Sep 11, 2012
We are wanting to use local database users to authenticate our SSH connections to our 6500 cores.
We have added the usernames and password into the 6500 using
username anameduser password astrongpassword or username anameduser secret astrongpassword
We where expecting the commands to be the same as other iOS devices example C3750 we would add.
Line vty 0 4 login local
And this would allow us to use the local user database to authenticate our ssh sessions.
The login local commands are not availbe on the 6500s and we have not found any documentation on how to impliment a local database for this purpose except in a CatOS 6500.
View 1 Replies
View Related
Jul 4, 2011
Using a CSV file, I can not add user in the internal database of the ACS I have a permanent "error File Format Validation Failed" However the file I want to import is a really CSV file.
View 2 Replies
View Related
May 15, 2012
i am running NX-OS image n5000-uk9.5.1.3.N1.1.bin on the nexus 5020 platform.i have configured authorization with tacacs+ on ACS server version 5.2 with fall back to switch local database.a user test with priv 15 is craeted on ACS server, password test2 everything works fine, until i create the same username on the local database with privilege 0. ( it doesnt matter if the user in local database was created before user in ACS or after ) e.g.: username test password test1 role priv-0 (note passwords are different for users in both databases)
after i create the same user in local database with privilege 0,if i try to connect to the switch with this username test and password defined on ACS, i get only privilege 0 authorization, regardless, that ACS server is up and it should be primary way to authenticate and authorizate the user.
View 3 Replies
View Related
Jan 18, 2013
I work at a campus and use the WCS to control access to my network for staff and only internet access for students. The Staff are assigned Username/password thru active directory and the student uses another SSID with only WPA --a password for all. I was tasked with adding more securing for students -- by adding a user/password. I do not want them connecting to my Active Directory for two reason--security risk and I have too many to input (over 1000). So, I wanted to use our internal database to validate users. I create a webpage with "WebAuth" that opens my logon page from my site and validates the login fields against the database. It works and this allows the user to navigate thru my website but not outside the site. If they try an outside url it redirect them to my logon script. I now understand why, so I'm looking for code I can add to my logon page that would allow me to redirect me to the controller's (once users are authenticated by my database) to call the WCS controller so I can enter a preset username/password so the policy management file would allow them access. I presently use "External" and don't know if "Custom" would work. Finding a way in using a database instead of adding one person at a time?
View 3 Replies
View Related
Aug 12, 2012
I am looking to port legacy ACS 4.2 "proxy distribution tables" to ISE 1.1.1 and I am currently a little at a loss where to start. I know I have to add the External RADIUS Server, Configure a RADIUS Server Sequence that will skip local authentications then send to the External RADIUS server. How do I match this authentication and how do I match it to an authorization rule? Is this the Network Access:Use Case equals proxy?
View 5 Replies
View Related
Jan 30, 2013
I am biulding a wireless network with 5508 WLC and trying to use ISE as radius server and also to redirect the web-login to it.I was trying to understand that to achieve the external web-login, do i need to use the raduius-nac option under advanced on the guest wireless where i am trying this out. and if not, where do i actually use it?So far what i have understood that i do need to have preauth ACL on the Layer 3 security, but the issue is there is no hit reaching the ISE.
View 9 Replies
View Related
Jan 16, 2012
I've got a pair of Cisco ACS 4.2 servers running on our corporate LAN. Currently they are doing TACACS+ for the network gear, and wireless authentications for internal users.
We have contracted with an external web site for an application - They can run RADIUS from their site to our LAN for the user authentications. How can I best do this?
1. NAT the traffic on my ASA firewalls to the internal servers, send the RADIUS traffic to/from the external site?
2. Is this secure?
3. Should I have a RADIUS server in the DMZ instead?
4. Any issues with doing this on ACS 4.2?
View 0 Replies
View Related
Apr 25, 2011
I am running ASA version 8.4(1), and anyconnect version 3.0.1047. My SSL VPN works fine, but i run into an issue with one user . his account did not work , and everytime users logged in it got this message "VPN Server could not parse request".
I found the problem after getting a user information meaning his username and password. His password had "&" as one of the special characters. when we change it to something that does not have that , it works just fine.
We are using microsoft NPS server as radius. but when i run a test within CLI it works just fine, only when anyconnect asks to authenticate it fails.
View 5 Replies
View Related
Sep 21, 2010
I have not done the firmware for the units yet but have had only 1 outage thus far (but I think it was a power issue over the weekend).What I have done, 3 weeks ago, is put external antenna's on the 2 units which are 15 feet apart at 15dBi.The output is 40hz and I changed the latency time settings on the main unit, leaving the secondary at factory.This seems to be working for me so far. Usually goes down over the weekend and have to reset Mondays,but not this week. I am afraid of running the firmware because then it may become unstable again.
View 6 Replies
View Related
Aug 6, 2012
Any software to measure Authentication time between client and Radius serverr.
View 8 Replies
View Related
Nov 22, 2011
I have been trying to get our IPS (ASA-SSM-10 and 4260) to authenticate with Cisco Radius ACS 5.2 and they are not working. However, I was able to get them working with Microsoft Radius. Below is the logs from the IPS:
evStatus: eventId=1321566464942057375 vendor=Cisco originator: hostId: NACAIRVIDLAB1 appName: authentication appInstanceId: 350 time: 2011/11/23 17:50:38 2011/11/23 09:50:38 GMT-08:00 controlTransaction:
[Code].....
View 0 Replies
View Related
Nov 14, 2011
I'm running WCS 7.0.220.0.I would like to authenticate users that are able to logon the WCS, through MS Network Policy Service (RADIUS).I would like all my domain users to be member of the local group on the WCS "Lobby Ambassador", so all domain users has access to generate guest access accounts, for the web auth... I can see under the WCS Administration under AAA that it should be able to use RADIUS - but i'm not sure how to setup the NPS policy?
View 1 Replies
View Related
Mar 10, 2011
I have a questión about radius authenticaction with AD, when I log in into the network with user in AD and I make a mistake in password my radius authenticaction event in ACS 5.2 dont show me this logg. only show the authentication succeeded but dont show me the authentication failed. Maybe i must to enable same service to show the authentiaction failed. The Voice authetication works fine..
This is the confg in the port of the switch:
interface FastEthernet0/12 switchport mode access switchport access vlan 2 switchport voice vlan 10 authentication port-control auto authentication host-mode multi-domain authentication violation protect authentication event fail action authorize vlan 11 authentication event fail retry 2 action authorize vlan 11 authentication event no-response action authorize vlan 11 authentication periodic authentication timer reauthenticate 60 mab dot1x pae authenticator dot1x timeout tx-period 10 dot1x max-reauth-req 3 spanning-tree portfast end
Vlan 2: DATA
Vlan 10: VOICE
Vlan 11: GUEST
View 1 Replies
View Related
Jan 3, 2013
I am configuring an old WLC4400 with V4.2.130.0. I added a new sub-interface for VLAN 50 with proper IP for the subnet and then add the Radius server(Windows server 2008 with NPS) onto WLC4400. I then created new WLAN with WPA+WPA2 Encryption and 802.1x key management and selected the Radius server under AAA for authentication.
Configured the test XP with WPA-Enterprise and PEAP as EAP method. I purposely configured computer to prompt for username and password.
When I try to connect, I did get prompt for username and password. However after that nothing happens. It seems like laptop just keep trying to authenticate.
I checked windows event log and do not see anything under NPS. I know this windows server NPS setup works as it is also the authentication server for our remotevpn.
is there any special option I need to turn on for WLC in order for Radius authentication work? Or is there any known bug with V4.2.130.
View 13 Replies
View Related
Aug 11, 2011
I'm in the process of moving some of our remote access vpn to an asa5520 and anyconnect.
The problem I've come across is that when using radius as authentication, I choose any one of my connection profiles in anyconnect and log in with any username regardless of the group on radius.
How do I map the connection profile to a group on radius so that i can separate the users?
View 1 Replies
View Related
Feb 15, 2012
I recently upgraded to Windows 7 in my company and the OS came bundled with Anyconnect VPN client version 2.5.
In the earlier version I used to add user profile using a .pcf file by importing it into the client to access customer LAN.
But in the Anyconnect VPN client I dint find any option to import the file. The IT support has told to edit the xml file to add it. The problem is I even after i edit the anyconnect-cert.xml with changes in host name and host address tags I am not able to start a connection. I dont knw know exactly what address must be given in Host address tag. I copied the host address from .pcf file which i used earlier.
Whether I will be able to add a user profile in this way or any correction is to be done in the whole process of adding the user profile,
View 1 Replies
View Related
Jun 7, 2012
I have a WLAN with 5 1200 Series AP (A/G) configured for Fast Roaming using the Cisco supplied documentation. Can I use one user name for all of my devices to connect to the Internal Radius Server? This would be similar to having a passphrase for WPA.
View 3 Replies
View Related
Mar 7, 2012
I have configure my ACS 5.3 to strip the prefix of the radius username (Domain week wang) it received and I also configured my ACS as the External Radius Server. However, this does not seem to work. The authentication protocol that I am using is PEAP Mschap v2.
I have read inside this forum that due to the fact that the radius username and password is transited inside the TLS tunnel of the PEAP MsChap v2 thus ACS is not able to do the stripping as it is not allow to touch anything inside the TLS tunnel.
View 1 Replies
View Related
May 17, 2011
I have a 5510 authenticating successfully with a RADIUS server. I'm using it for VPN authentication and it works great. I would also like to do this for administrator access to the ASA. When I turn it on though, any authentication for VPN access is also granted administrative access to the ASA. Obviously, I need to limit that to a select few users.
View 1 Replies
View Related
Sep 2, 2012
which is the best RADIUS server for 802.1x wired authentication?
View 1 Replies
View Related
