Cisco VPN :: ASA5500 Static Address For Vpn User
Apr 10, 2011
I am trying to configure ASA to assign same static ip address to certain user(User1) every time when he connect to network via AnyConnect client. We have Windows AD and use LDAP AAA server for authentication of VPN Remote Access users. I found in document "Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2" in section "Configuring an External Server for Security Appliance User Authorization" explanation and configured ASA and User Properties in AD on exectly same way:First, I assigned static ip address in properties menu(dial in section) of User1 in Active Directory. Then I created ldap attribute map where I mapped msRADIUSFrameIPAddressattribute to IETF-Radius-Framed-IP-Address attribute. At the end I applied this ldap attribute map to AAA server group LDAP.
Although I set this up, whenever I connect using User1 credentials from AD I still get ip address from vpn pool instead static ip address that I configured. In output of debug ldap 255 command I found line "msRADIUSFramedIPAddress: value = -1062718956" but not any line that prove mapping above mentioned attributes.It seems like mapping is not working.All AnyConnect users get parameters from defined internal group policy on ASA,including addresses form pool,dns server etc. I want that User1 get static ip address and inherit all other parameters from group policy.
View 4 Replies
ADVERTISEMENT
Sep 15, 2011
At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies
View Related
Feb 12, 2012
Actually I have a lab with ACS 5.3 running with 802.1x, but when when the user is successfully authenticated, it's assigned and IP address from the DHCP server, is there a way to assign a static IP address depending of login username??
View 13 Replies
View Related
Sep 17, 2011
At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?
View 7 Replies
View Related
Feb 28, 2012
I would like to configure the below setup:
End user client (Cisco Any connect/VPN client) -> ASA 5500 (AAA client) -> ACS server -> External RADIUS database.
Here ACS server would send the authentication requests to External RADIUS server.So, i have added the external user database (RADIUS token server) in ACS under External databases.I have added AAA client in Network configuration (selected authenticate using RADIUS(VPN 3000/ASA/PIX 7.0) from the drop down.
Here how do i make ASA recognize that it has to send the request to ACS server. Normally when you use ACS as RADIUS server you can add an AAA server in ASA and test it.But here we are using an external RADIUS server which has been configured in ACS, so how do i make ASA to send the requests to ACS server?
View 6 Replies
View Related
Nov 29, 2011
I want to assign static IPs to users that login to IPSec VPN using Group Authentication in ASA 8.2. The authentication through a Windows RADIUS server. Right now, they are connecting just fine and pulling an IP from the pool I have configured in the IPSec policy.
What would the best way to assign static IPs through VPN?
View 1 Replies
View Related
Jun 7, 2011
how I can assign a static IP to a user in ACS 5.2. I am able to do it in ACS 4.2, but I don't see the same options under 5.2. General idea is that users authenticate from our VPN appliance via RADIUS, and upon authentication, their static IP is passed back to the VPN device. I can attach an arbitrary field to my local users by going to System Administration -> Configuration -> Dictionaries -> Identity -> Internal Users, but how do I get that IP address passed back when the user is authenticated via Radius?
View 1 Replies
View Related
Sep 14, 2012
I am in need of a Static IP alternative (My ISP chooses not to offer the service). I do not need the Static IP to access my own devices. I need to access other networks as a "trusted" user.
View 10 Replies
View Related
Mar 22, 2012
User connects through a sonicwall device via SSL VPN and gets a static IP every time, despite what device they come from.
1. LDAP somehow supplies the IP from a DHCP server behind the sonicwall
2. The sonicwall somehow supplies the static IP on the interface that the net extender is connected to.
View 2 Replies
View Related
Oct 30, 2012
I am having an issue with connecting to the internet on my laptop. I have never had this problem before and after google-ing it, it appears that a lot of other people have the same issue. I had a message pop up that said something along the lines of 'another user on your network has the same ip address as your computer.' I lsot my connection, but was then able to re-connect. However, now I am permanently disconnected from the internet. I have reset my wireless adapter and that hasn't worked. I'm currently using my mum's computer and her internet is working fine.
View 17 Replies
View Related
May 13, 2013
Right now I have a lab setup with a couple of these AP's.They are both doing DHCP to get their IP address from a 5508.How do I set a static IP address on the AP?
View 5 Replies
View Related
May 26, 2012
I am trying to give an static ip address to a time clock on my network and for some reason when I connect time clock to network it will always get an ip address from a different network. for example my computer IP address is 192.168.2.70 when connected to network, my default gateway is 192.168.2.1, the IP address that the time clock always gets is 192.168.1.120, there is no way to tell the time clock what IP address I wanted to be it has to get it from router (that is what the manufacturer told me), router (16portLiksys) does not have DHCP enabled the guy who set up network left it disabled, on his notes he says server (dell server T110) is acting as router is that true that a server can be acting as router?what do guys think is going on here?all the computers hooked up to network have static IP address.I also notice that when I connect a computer to router it will get an IP address from different network the same as time clock.I tried to reserve ip address on router by entering MAC address from time clock but it won't work. I am not very familiar with the server settings I have not try changing settings on server, I am not even sure the guy who set up network is right about using server as router.
View 1 Replies
View Related
Mar 15, 2013
I have two different locations, two different ISP�s .
Cable �Modem--------Linksys Router WRT54G
DSL-Modem----------Linksys Router WRT54GS
One computer (Windows 7 Laptop) which travels between both locations.Can I or how do I setup a static IP address for both locations on my computer and not have to change settings when I change locations?
View 1 Replies
View Related
Jan 21, 2012
I want to send a folder to other user in lan by ip address.
View 1 Replies
View Related
Feb 7, 2012
configure my cisco 892 router want a static ip address assigned to the interface because and I have no more internet on the router because am working on my network academy for CCENT?
View 28 Replies
View Related
Apr 22, 2013
My second problem with sg200-08 (firmware: SG200-08x_FW_1.0.6.2.stk) is when I try to add specific MAC address as secure:MAC Address Tables - Static Addresses - Add; insert vlan id, port, mac address and select "Secure":I get error message: "Error: Failed to Add 'Static Address' entry.
View 3 Replies
View Related
Sep 13, 2012
I have a problem with LMS 4.2 user tracking.When I generate a report on all my network all mac address are ok but there is no Hostname/Ip address in the result, except for 2 equipments.the only difference between these 2 equipements and the rest of the network is that they are connected on a not routed vlan. All the other phones, computers are connected on a routed vlan.I have a Nexus 5k as core and 2960 as access. Routing between vlans is done with the NexusMy DNS server is ok and reachable.
View 2 Replies
View Related
Aug 23, 2012
A short background. Our corporate SSID is being migrated from using PEAPv0 to EAP-TLS. This restricts access only to company notebooks. Additionally we have barcode scanners which are used to inventory assets. Those devices are not able to use EAP-TLS as they cannot be integrated in the domain and being unable to do certificate based authentication.
As a workaround we planned to use another SSID with access to the same network but using PEAPv0 as authentication method, basically the same SSID but with a different name. As this naturally allows anyone to access the corporate network with a valid username/password I now wanted to add another step into the authentication process - the MAC of the device. I know I can do the filtering at the WLAN controller, but as it has a limited database as well as the fact that it is cumbersome to maintain the MAC list on all the controllers I thought I can do it over our ACS system.
I am now trying to accomplish the following: The user gets authenticated via the internal user store, which is succesful. Now I want to authorize the user via the MAC address, which is stored in the internal host store of the ACS, if access is granted or not.
For this I created the following policy:
Service Selection Policy -- (Rule based result selection)
-- (NDG:Device Type in All Device Types:Wireless And RADIUS-IETF:Called-Station-ID contains <SSID>) | Result: PEAP access
-- Default | Result: DenyAccess
Service PEAP access Identity: Internal Users -- (Single result selection) Authorization -- (Rule based result selection) -- Internal Hosts:HostIdentityGroup in All Groups:Valid_MACs
When I then try to access the wireless network I won't get authenticated. The error I get, when I look into the logs is: 15039 Selected Authorization Profile is DenyAccess
Is it not possible to use one identity store as "attribute database" for the other identity store?
View 5 Replies
View Related
Sep 11, 2012
I am having an issue with the user VPNs. For users connected via the AnyConnect VPN client, all of their Internet traffic goes out their local Internet connection, since I am using split tunneling. However, I need a specific public IP address to go through the VPN tunnel and out the DIA at the main office, rather than the user's local internet connection. I managed to have this IP address go through the tunnel to the ASA at the main office, but it appears that it gets blocked somewhere there, or maybe the return traffic gets blocked. I am using an ASA 5520 at the main office, with software version 8.3.
View 3 Replies
View Related
Aug 25, 2012
i have configured wlc 2504 .in that i have configured two interfaces.one is guest, 2nd is internal user, the pblm when user try to connect with that contain ssid user not getting ip address,
i have connected only one link between core to wlc on port 1.for guest interface i used port 4.but no physical link.
View 3 Replies
View Related
Oct 25, 2011
New install discovered router and switches at same location with no issues. However when running an acquisition on those switches most fields are populated except the ip address of end host associated with port. Mac address, port speed, etc. but no ip address info on per port basis. Using snmp v3 if that makes a difference.
View 10 Replies
View Related
Jul 11, 2011
I am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)
View 1 Replies
View Related
Jan 7, 2013
HP wifi printers (I've had 2 over the last several years)eventually have a disconnect with my wifi router and was told (by an experienced IT guy from my last job) I should assign the printer a static address to eliminate the problem. How can I assign a static address to my printer. Here are the models Router: Belkin model F5D9231-4v1(01); Printer HP Officejet 6600. I know how to access the printer and manually enter an IP address and subnet and such, I just don't know which numbers to use where. I also know how to access my router, via typing in the IP address in Internet Explorer, but i'm unsure of which tab within the router's page (i.e. is it category wirelessunder MAC address control) or which numbers (IP address or MAC Address)and where should I get the correct numbers from (i.e. go run, cmd,IPconfig/all).
View 6 Replies
View Related
Feb 24, 2011
Everytime I start one of my two Windows machines, I need to go to the control panel network adapter and enter the static IP address in the IPV4 properties. It is always blank after a shutdown.I have two machines that are networked for flight simming.One of the machines must have a static IP so I configured both static. Not sure if this has anything to do with my problem.
View 5 Replies
View Related
Feb 7, 2011
A business network has had a Static IP Address for several years. Recently, something caused the settings to be changed to "Obtain an IP Address Automatically". As a result, pcAnywhere will no longer connect, and this is a critical function of the office. This has to get fixed. I've attempted to put the settings back to what they were (The IP Address, Subnet Mask, Default Gateway, etc...) but now the Server will no longer connect to the internet when you setup the Static IP. The settings I am using are exactly the same as the ones from over 2 years ago. Now they no longer work, and networking is confusing to me.
View 4 Replies
View Related
Jun 10, 2012
I've had the same IP address for years and want to change it to a new one - I have a dynamic IP but for some reason it will never change.It looks as if it's always static-what settings I need to change on Windows 7 to get it to roll over onto a new IP address?
View 1 Replies
View Related
Jan 24, 2012
how to connect a different ip addressing single system in different place. but we cann't change the ip address in manually
View 1 Replies
View Related
Jul 13, 2012
I would like to authorize a friend in my house to access my wifi I was told to go to http://192.1.1 and enter the MAC address of my friend. However on the site I was unable to enter the information into the box - how can I authorize my friend to use my wifi?
View 1 Replies
View Related
May 28, 2012
We have a Cisco ASA 5520 and in order to conserve public IP addresses and configuration (possibly) can we use the same public IP address for a static NAT with two different interfaces? Here is an example of what I'm refering too where 10.10.10.10 would be the same public IP address.
-static (inside,Outside) 10.10.10.10 access-list inside_nat_static_1
-static (production,Outside) 10.10.10.10 access-list production_nat_static_1
View 2 Replies
View Related
Feb 8, 2011
I've got a network of several AIR-LAP-1242G LWAPP access points controlled by a 2112 WLC. I assign static IP addresses to each LWAPP, but every few weeks, a couple of them (at random) revert back to grabbing a DHCP-assigned dynamic address for themselves, despite the fact that they're supposedly solidy configured to have static IPs. What's going on here? Is this a bug in their firmware or the WLC's firmware? If I reboot the APs, then they come up with their static IPs, but after running some random number of days/weeks, will spontaneously change their own management IP addresses and grab a DHCP address for themselves.
The 1242G APs version numbers reported by the WLC's web GUI are:
"Software version" 5.2.193.0
"Boot version" 12.4.13.0
"IOS version" 12.4(18a)JA2
"Mini IOS version" 3.0.51.0
The 2112 WLC is running software version 5.2.193.0
View 2 Replies
View Related
Feb 3, 2013
I have ASA 5505 with basic licence, v9.1, ASDM 7.1. I want to create the DMZ for a web server.
The interface 0 is for the outside network The interface 6 is for the DMZ All other interfaces are for the inside network
My ISP provided me with one public static IP address, one gateway address and a subnet mask 255.255.255.252
1/ I would like to ask which interface I should assign the public static IP address to. Should it be assigned to the outside interface 0, or should it be assigned to the DMZ interface 6, while outside interface would be configured to use DHCP?
I tried to assign the static IP address to the outside interface first, but then when I used ASDM the “Public Servers” feature to configure NAT, I get error message that the outside interface and the public address cannot have the same IP address.
2/ For the sake of peace of mind, I am thinking about using the second firewall, which would be used only for the inside network. Can I connect this second firewall to one of the inside interfaces of the 1st firewall,
View 4 Replies
View Related
Nov 6, 2011
I recently switched operating systems from XP to Windows 7. Since that time whenever I need to reboot the router, it does not recognize my printer. How do I set the router to a static ip address and will that affect its recognition of my computer? I have had no problems with computer recognition, only printer.
View 3 Replies
View Related
Apr 5, 2013
I am having a cisco 861 series router.The Cable from the isp was connected to fastethernet4(wan port)
Following are my isp details
IP address:172.16.62.130
subnet:255.255.0.0
default gate way:172.16.62.1
dns primary:202.153.32.2
secondary:202.153.32.3
How do i configure this details in the router and access the internet in my devices.
i want the network to be in 192.168.1.0 to 254.
how do i configure my router with this details using cisco configuration professional
View 1 Replies
View Related
