Send Folder To Other User In Lan By IP Address?
Jan 21, 2012I want to send a folder to other user in lan by ip address.
View 1 Replies
ADVERTISEMENT
Share Folder To User On Another Machine
Jan 24, 2012I need to share a folder on a machine to make a scheduled backup from a server.How can I give access to the server Administrator only?
Set Permission For Just One Remote User To Share A Folder
Apr 19, 2011I want to share the My Documents folder from an XP machine with ONLY one user (the administrator) on a networked Win 7 machine. I have turned off simple sharing on the XP machine. I hate XP!! So complicated to do anything. Anyway, under security, I have tried share this folder, and not to share folder. I have gone into Advanced and messed around with permissions, taking out Everyone, using Admin only, using Network. At one point I ended up not being able to access My Documents on the local computer and had to jump through many hoops to change ownership and disable read only so that the user could use her own files!The problem is, under Advanced in the permissions area, I cannot see the users on the remote pc to choose which one should be allowed access. how to actually find a particular user on the Win 7 pc and give ONLY that user permission to read (not to change) the files in My Documents on the XP pc.
View 3 Replies View RelatedBroadband :: Share Any Folder Or Drive Only One User Amongst 20 Users At Windows Xp
Jun 7, 2011I want to share any folder or drive only one user amongst 20 at windows xp.How?
View 1 Replies View RelatedSharing :: Cannot Move Folder Created By Another User On Network Drive
May 14, 2011I have a Windows 2003 SP2 server with a shared folder. This folder is accessed by 2 people on a regular basis. The problem we are experiencing is when a folder is created by user A, it cannot be moved by user B (and vice versa), as it says the folder is in use.The exact error is: Error Moving File or Folder.Cannot move <filename>: Access is denied.Make sure the disk is not full or write-protected and that the file is not currently in use.I have explicitly set full control for both users on the folder. The drive has 70GB of 500GB remaining. I have also used File Server Management to verify the files were not in use when they were being moved.The server is Windows 2003, SP2. Domain environment, with all relevant users having permissions on the folder, and the everyone account removed. Any other operation inside the shared folder works fine.
View 2 Replies View RelatedHome Network :: How To Disable Password Prompt For VPN User On Shared Folder
May 5, 2012How to get rid of Username Password prompt for VPN user connecting to computer with guest access on shared folders?If a VPN user types any word in the user name and hits enter without password, it gets in and sees shared folders, but I want this prompt to be disabled.
View 1 Replies View RelatedSharing :: User Unable To Save Files In Shared Network Folder
Mar 11, 2013I have a user that is trying to save an excel speadsheet that is located in a shared folder on a server, the user can open the file and edit ok but when they try to save the file the progress bar pops up but just hangs then a message pops up to saying "file not saved". They are using Windows 7.The user is new and I have just set up their account so thought it might be permission issues but I have logged the user in on two other different machines (1 win7 and 1 WinXP) and they have no problem at all.
View 7 Replies View RelatedCannot Access Shared Folder Using IP Address?
Sep 25, 2012I have domain controller windows server 2003 and 30 domain members, and everything was working fineYesterday our xp client complain that they cannot access shared folders and files in our domain controller server.After some time i found that i can access the shared folder by name (\nameserver) but i cannot access them by IP (\XX.XX.XX.XX)[CODE]
View 5 Replies View RelatedSend To LAN Server / Address?
Sep 6, 2011Whose address I would put in "Send to LAN server" within firewall rules for inbound services.
View 4 Replies View RelatedCisco Security :: ASA-5540 / UI - Send Command ASDM Location (network Object IP Address) To Device
Dec 17, 2007When ever I create a network object in ASDM 6.0(3) the UI also wants to send the command 'asdm location (network object IP address)' to the device.What is the purpose of 'asdm locaction ....'? Is it telling the ASA-5540 that the IP address is allowed to connect to the device using ASDM?If that is the case why does 'asdm location xxx.xxx.xxx.xxx'get denerated for every network object I create?
View 3 Replies View RelatedIP Reservation For User Rather Than MAC Address?
Mar 22, 2012User connects through a sonicwall device via SSL VPN and gets a static IP every time, despite what device they come from.
1. LDAP somehow supplies the IP from a DHCP server behind the sonicwall
2. The sonicwall somehow supplies the static IP on the interface that the net extender is connected to.
Another User On Network Has Same IP Address?
Oct 30, 2012I am having an issue with connecting to the internet on my laptop. I have never had this problem before and after google-ing it, it appears that a lot of other people have the same issue. I had a message pop up that said something along the lines of 'another user on your network has the same ip address as your computer.' I lsot my connection, but was then able to re-connect. However, now I am permanently disconnected from the internet. I have reset my wireless adapter and that hasn't worked. I'm currently using my mum's computer and her internet is working fine.
View 17 Replies View RelatedWireless :: Entering MAC Address Authorization For Second User?
Jul 13, 2012I would like to authorize a friend in my house to access my wifi I was told to go to http://192.1.1 and enter the MAC address of my friend. However on the site I was unable to enter the information into the box - how can I authorize my friend to use my wifi?
View 1 Replies View RelatedCisco VPN :: ASA5500 Static Address For Vpn User
Apr 10, 2011I am trying to configure ASA to assign same static ip address to certain user(User1) every time when he connect to network via AnyConnect client. We have Windows AD and use LDAP AAA server for authentication of VPN Remote Access users. I found in document "Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2" in section "Configuring an External Server for Security Appliance User Authorization" explanation and configured ASA and User Properties in AD on exectly same way:First, I assigned static ip address in properties menu(dial in section) of User1 in Active Directory. Then I created ldap attribute map where I mapped msRADIUSFrameIPAddressattribute to IETF-Radius-Framed-IP-Address attribute. At the end I applied this ldap attribute map to AAA server group LDAP.
Although I set this up, whenever I connect using User1 credentials from AD I still get ip address from vpn pool instead static ip address that I configured. In output of debug ldap 255 command I found line "msRADIUSFramedIPAddress: value = -1062718956" but not any line that prove mapping above mentioned attributes.It seems like mapping is not working.All AnyConnect users get parameters from defined internal group policy on ASA,including addresses form pool,dns server etc. I want that User1 get static ip address and inherit all other parameters from group policy.
Cisco :: LMS 4.2 User Tracking / No Host-name / IP Address In Result
Sep 13, 2012I have a problem with LMS 4.2 user tracking.When I generate a report on all my network all mac address are ok but there is no Hostname/Ip address in the result, except for 2 equipments.the only difference between these 2 equipements and the rest of the network is that they are connected on a not routed vlan. All the other phones, computers are connected on a routed vlan.I have a Nexus 5k as core and 2960 as access. Routing between vlans is done with the NexusMy DNS server is ok and reachable.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 Authorization Of User Based On MAC Address
Aug 23, 2012A short background. Our corporate SSID is being migrated from using PEAPv0 to EAP-TLS. This restricts access only to company notebooks. Additionally we have barcode scanners which are used to inventory assets. Those devices are not able to use EAP-TLS as they cannot be integrated in the domain and being unable to do certificate based authentication.
As a workaround we planned to use another SSID with access to the same network but using PEAPv0 as authentication method, basically the same SSID but with a different name. As this naturally allows anyone to access the corporate network with a valid username/password I now wanted to add another step into the authentication process - the MAC of the device. I know I can do the filtering at the WLAN controller, but as it has a limited database as well as the fact that it is cumbersome to maintain the MAC list on all the controllers I thought I can do it over our ACS system.
I am now trying to accomplish the following: The user gets authenticated via the internal user store, which is succesful. Now I want to authorize the user via the MAC address, which is stored in the internal host store of the ACS, if access is granted or not.
For this I created the following policy:
Service Selection Policy -- (Rule based result selection)
-- (NDG:Device Type in All Device Types:Wireless And RADIUS-IETF:Called-Station-ID contains <SSID>) | Result: PEAP access
-- Default | Result: DenyAccess
Service PEAP access Identity: Internal Users -- (Single result selection) Authorization -- (Rule based result selection) -- Internal Hosts:HostIdentityGroup in All Groups:Valid_MACs
When I then try to access the wireless network I won't get authenticated. The error I get, when I look into the logs is: 15039 Selected Authorization Profile is DenyAccess
Is it not possible to use one identity store as "attribute database" for the other identity store?
Cisco VPN :: ASA5520 - Redirect Single IP Address Through User
Sep 11, 2012I am having an issue with the user VPNs. For users connected via the AnyConnect VPN client, all of their Internet traffic goes out their local Internet connection, since I am using split tunneling. However, I need a specific public IP address to go through the VPN tunnel and out the DIA at the main office, rather than the user's local internet connection. I managed to have this IP address go through the tunnel to the ASA at the main office, but it appears that it gets blocked somewhere there, or maybe the return traffic gets blocked. I am using an ASA 5520 at the main office, with software version 8.3.
View 3 Replies View RelatedCisco Wireless :: 2504 - User Not Getting DHCP IP Address?
Aug 25, 2012i have configured wlc 2504 .in that i have configured two interfaces.one is guest, 2nd is internal user, the pblm when user try to connect with that contain ssid user not getting ip address,
i have connected only one link between core to wlc on port 1.for guest interface i used port 4.but no physical link.
Cisco :: LMS 4.1 User Tracking Does Not Pull IP Address From Hosts?
Oct 25, 2011New install discovered router and switches at same location with no issues. However when running an acquisition on those switches most fields are populated except the ip address of end host associated with port. Mac address, port speed, etc. but no ip address info on per port basis. Using snmp v3 if that makes a difference.
View 10 Replies View RelatedCisco AAA/Identity/Nac :: 892 - L2TP And Fixed Framed IP Address For VPN User?
Mar 29, 2012I have a running L2TP/IPsec VPN setup with authentification against a radius server (freeradius2 witch mysql). I would like to have some of my VPN users get a fixed IP address instead of the dynamically assigned IP Pool.
The radius server is returning the correct parameters, I think.
It´s a Cisco 892 Integrated Service Router. Code...
Cisco VPN :: ACS 5.2 Create Static IP Address User For Remote Access
Sep 15, 2011At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: Assign Fixed IP Address To User In ACS5.2?
Aug 8, 2011My company requires each user dial-in must be a fixed IP; The old acs4 can,but I cannot find the same configration item in the ACS5.2
View 2 Replies View RelatedCisco :: LMS 4.2.3 Missing IP Address In User Tracking End Host Table
Feb 27, 2013We are running LMS Prime 4.2.3 on a Softappliance. We have a Cisco Switch behind a Non Cisco Layer-3 Device. In the end host tabe we see only the MAC-Addresses of the host connected to this switch. No IP-Address. The corresponding IP-Addresses are in the ARP-Table of this non Cisco Layer-3 Device. The arp table can also be read by snmp. Is it possible to get the ip address in the UT End Host Table in such an environment?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 Assign Static IP Address Depending On Authenticated User
Feb 12, 2012Actually I have a lab with ACS 5.3 running with 802.1x, but when when the user is successfully authenticated, it's assigned and IP address from the DHCP server, is there a way to assign a static IP address depending of login username??
View 13 Replies View RelatedCisco AAA/Identity/Nac :: Use ACS 5.2 To Create Static IP Address User For Remote Access VPN
Sep 17, 2011At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?
Cisco Wireless :: 5508 - Allowing User To Access Internet After Entering Email Address
May 25, 2013I have 5508 controller in my lab. I am working on a project to set up a public internet but with some condition.
- User should able to connect to the SSID without any authentication.
- Once user will connec to the SSID it should redirect to an external URL which indicates terms and condition and email address field.
- User should enter his/her email address in email addrss filed and click I accept button.
- Once that is done then he/she is allowed to access internet.
We are not sure how can we achive this as I do not know what should be the return value for WLC to allow that user to go through or what should be the settings on the WLC to redirect to the page.
I have seen a settings on web authentication for external URL but I guess it is only for username passwor or Radius authentication. While in this case I do not want to use any authentication just an accept buttor or Decline button and all good to go.
Cisco AAA/Identity/Nac :: ACS 5.2 User Roles And Restricting User Access To Add Items?
Sep 22, 2011We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies View RelatedCisco Firewall :: 5510 - Display User Message When User Connects Using AnyConnect Client?
Apr 20, 2009We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
Cisco Firewall :: Create Local User In ASA 5520 To Allow User To Use ASDM In Read-Only Mode?
Oct 10, 2011I want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies View RelatedCisco Wireless :: Allow User To User Traffic On WLC 5500?
Nov 21, 2012Is it configurable to allow wifi user to user traffic on WLC 5508?
View 4 Replies View RelatedAccess Dos Folder From XP?
May 26, 2011I would like to access dos folder from XP machine. I installed Microsoft Client 3.0 on DOS machine. My DOS machine can see shared folders on XP machine. My DOS machine is shown on XP but cannot browse DOS shared folders.
View 2 Replies View RelatedSharing A Folder With Everyone
May 1, 2011I am trying to create a shared folder accessible to anyone on the network.The folowing are my settings under advanced sharing settings.
-Turn OFF network discovery
-Turn ON file and print sharing
-Turn ON sharing so anyone with network access can read/write files in the public folder
-USE 128 Bit encryption
-Turn ON password protected sharing.
The settings are as follows for the folder.Under the security tab, User EVERYONE, full control. There are no deny settings anywhere.Under The sharing Tab-Advanced Sharing- Share this folder is checked. After clicking Permissions, the only uder in here is EVERYONE with full control.When someone else on another computer clicks on my computers name, it asks for a username/password. I do not wish to give out the username/password of any user on this computer. I created another user on the computer that has the shared folder. When that username and password is entered on another computer, the computer does not accept it, and requests the username and password.WITHOUT totally reconfiging the network settings on the computer to share the folder, how do I create a folder that will permit everyone to read/write from? If reconfiguring of the network settings are required, what settings do I need to change to ensure high security, and will permit anyone on the network to access this folder?
Can't Seem To Unshare Users Folder
Nov 5, 2012I have a desktop pc, and a laptop both connected to wireless internet in a house with about 5 other computers getting internet off of the same wireless router.A while back I had figured out how to share my printer which is wired to my desktop, with my laptop but without sharing any files and figured i had done it.Today I had to figure out why the printer had stopped printing from the laptop and i noticed that in the network area of the explorer I could see my users files on the desktop from my laptop and vice versa. I have been trying everything that seems to be there to disable sharing these files, other then disconnecting from the internet.
On my desktop I can right click on the users folder and choose share>share with nobody. I did that.I also went into the advance sharing options on both devices and tried disabling everything but network discovery.From what I gather discovery is just letting me browse, and not actually showing me that things aren't available to share. So with everything else turned off, like file and printer sharing, all that other stuff, I can STILL see and move and use the files that I have "shared with nobody" even regardless of the fact that I have disabled printer and file sharing. Both machines are running Windows 7
