Sharing :: Cannot Move Folder Created By Another User On Network Drive
May 14, 2011
I have a Windows 2003 SP2 server with a shared folder. This folder is accessed by 2 people on a regular basis. The problem we are experiencing is when a folder is created by user A, it cannot be moved by user B (and vice versa), as it says the folder is in use.The exact error is: Error Moving File or Folder.Cannot move <filename>: Access is denied.Make sure the disk is not full or write-protected and that the file is not currently in use.I have explicitly set full control for both users on the folder. The drive has 70GB of 500GB remaining. I have also used File Server Management to verify the files were not in use when they were being moved.The server is Windows 2003, SP2. Domain environment, with all relevant users having permissions on the folder, and the everyone account removed. Any other operation inside the shared folder works fine.
View 2 Replies
ADVERTISEMENT
Mar 11, 2013
I have a user that is trying to save an excel speadsheet that is located in a shared folder on a server, the user can open the file and edit ok but when they try to save the file the progress bar pops up but just hangs then a message pops up to saying "file not saved". They are using Windows 7.The user is new and I have just set up their account so thought it might be permission issues but I have logged the user in on two other different machines (1 win7 and 1 WinXP) and they have no problem at all.
View 7 Replies
View Related
Jan 2, 2012
Having problem locating why when a user logs on to their profile, their personal network drive shows everyones personal drive file and they have acces to all files.This is a major security concern as uppper management files are then accessable.It is random, may not always be displayed, or always occur on the same user.The User drive normally displays.
joed on \serverusers$ (H:)
When this takes place the users name is replaced with just Users Users on \serverusers$ (H:) (This can sometimes change to Z drive)
This then exposes all user drives.This does not run from a script but is used in AD under the profile drive letter. Have tried to:Rebuild profile in Active Directory. (New Profile)Re Build user profile on workstation>Rebuild Operating system on Workstation.Change drive on the user profile in AD letter H to Z.Have also tried on a different workstation.
View 1 Replies
View Related
Nov 26, 2011
I have a desktop and a laptop. I'm trying to share my external HD from my desktop, to my laptop.What I did was gave the local administrators group full share permissions to the drive, and of course the local administrators group also has full NTFS permission.That being said, I went to my laptop and did a Code:net use X: \mydesktopexternal /user:mydesktopuser PasswordExternal is the share name for the external HD on my desktop. The command worked successfully, however, I am still getting Access Denied when trying to get inside of this mapped drive.How and why does the command map the drive properly, using those credentials, but there's no access when trying to navigate to it? It works if I give Everyone full share permission, but I don't want anyone to just connect to it. Use password protection file sharing is enabled, but of course with "Everyone" given permission, that won't apply (at least to my knowledge).
View 7 Replies
View Related
Jun 7, 2011
I want to share any folder or drive only one user amongst 20 at windows xp.How?
View 1 Replies
View Related
Jan 24, 2013
I would like to turn on continuous video recording and have it sent to a drive on the same network as the camera without going through a computer. Is there a way to setup the "storage folder" as a network drive? For example my network drive is accessed at \192.168.0.1volume1 through a web browser.
View 1 Replies
View Related
Jul 5, 2012
I am using windows 7 and i have a folder which I share between other computers and laptops at home, but I want to share that folder as a web page, for example if i type the www or the ip address it should appear like a web page, i guess that way it will be faster then normal shared folder, is it possible that I assign an IP to that folder and forward it to the network users?
View 5 Replies
View Related
Mar 16, 2011
I have redirected the IE Favorites folder to our network but I need a script to copy the Favorites to the new location.
View 2 Replies
View Related
Feb 2, 2013
I'm trying map the USB hard drive connected to my EA4500 router as a network drive in Windows 7, and it works perfectly until I enable secure folder access on the router.
After enabling secure folder access, and not changing any other settings on the router I first unmount the drive since it was set up without credentials and doesn't work that way any more. When I try to remap the drive I use the same address, but select "Connect using different credentials" When it prompts me for the log in info I try using the router admin account, but it fails to connect. Windows network diagnostics tells me the device refused the connection. I proceeded to set up an account on the router under the folder access settings with the same username, and password I use on my computer, and tried to connect it without checking "Connect using different credentials" (And typing them in manually if that matters) with the same results.
Even with secure folder access enabled I can still reach the drive just fine by typing "ftp://192.168.1.1/" into file explorer. It prompts me for a username and password, I put in the admin credentials, and I'm in. Even the account I created with the same username/password as my computer works this way.
After disabling secure folder access everything works perfectly fine again... I would MUCH rather do this with it though.
Following these directions: [URL] When clicking the browse button the router shows up when secure folder access is disabled, but does not after it is enabled. I've looked through my windows sharing settings, and haven't noticed anything that should cause problems, pretty much everything is enabled. I've also tried turning off my firewall with no success.
View 7 Replies
View Related
Jan 29, 2012
I have been using FrontPage 2003 successfully and recently as of 2 days ago...I wanted to edit the website and the files are ALL missing. UGH!!!! Its very frustrating that I cannot edit the website now and we are missing valuable information. I did see the files when I created a new Network Place with the prefix but I cannot edit and save to our website. Now I did ask MyHosting administrator but they are seriously taking longer to get back to me then needed. I can open Front Page, but of course, cannot publish anything to the website. More so, even just opening the files in server.com is the actual issue because I cannot change the website page. That's the files I need to change in Front Page. I did go to my account settings within myhosting server to the File Manager and YES! I could see all the files....but again I cannot save anything to the website or publish..I DID NOT DOWNLOAD anything over the past few days and have not gone to unauthorized websites that would have provided a virus. Everything else works fine.
View 1 Replies
View Related
Nov 13, 2012
I have a cisco 3560 8 port switch. I really would lime to have the webinterface enabled. So i downloaded the archive from cisco. I extracted the archive to the flash of the switch. After rebooting the device everythings looks fine, but the html folder is a subfolder. It looks something like this: flash:c3560.../htmlI my understanding to enable the webinterface the html folder should be here flash:htmlHow do i move the html folder from the subfolder to the root?
View 1 Replies
View Related
May 5, 2012
How to get rid of Username Password prompt for VPN user connecting to computer with guest access on shared folders?If a VPN user types any word in the user name and hits enter without password, it gets in and sees shared folders, but I want this prompt to be disabled.
View 1 Replies
View Related
Mar 10, 2011
I'll start by explaining my setup. I have my desktop computer running Windows 7 Ultimate x64. I have a home server running Windows Home Server 2011 Vail. I am trying to map a network drive from Windows 7 to the hard drive in Windows Home Server. The issue is, I'm unable to set permissions.
I setup the share by right clicking the drive and click "Sharing", then advanced sharing. Click permissions, and add my username (HOMESERVERKeith), and give the account full permissions. Hit apply a couple of thousand times. I go to my desktop, right click computer and click "Map Network Drive..." and fill in all the details. Folder is set to HOMESERVERMovies HDD. Because the user "everybody" doesn't have permission, I click "connect using different credentials." For the username I type in "HOMESERVERKeith", and of course type the password. I don't get an error, the login box just shows itself again. There is no permission error, no incorrect password, it just prompts for another login.
View 9 Replies
View Related
Jan 19, 2012
I can no longer add user permissions to a network C: drive - I get an access denied message. What could have happened?
View 6 Replies
View Related
Apr 8, 2011
I am unable to share the map network drive to other computer .
View 2 Replies
View Related
Oct 3, 2012
there is one 1.desktop with windows7 professional and one 2.laptop with windows7 ultimate both are attach with cross cable no1 desktop's IP is 192.168.0.1 and second 2.laptop's IP is 192.168.0.2. the problem is that no1 can access files and folder from no2. but in same way when no2 is trying to access his shared drive he is unable to access
View 7 Replies
View Related
Aug 8, 2011
At work we have a private network set up so that any computer that is plugged into the wall is on the same network. (i.e. all ip addresses are identical except for the last block of numbers)All machines are running WinXP.We have one computer set up as a file server (computer with shared folders) that is plugged into a wall socket. We have 3 other machines that can see and access the shared folder on the server computer once they are plugged into a wall socket. The odd thing is that these 3 machines have different settings as far as I can tell. They are all on different workgroups but they have no problem finding the shared folder.However, when I go to plug my laptop into a wall socket, I am not able to map a network drive. The error msg says it cannot find the drive. I have my laptop set-up on the same workgroup as the server computer and the server computer can see my laptop. But when I double click on my laptop in the server computer workgroup I get a msg saying permission is denied.
My laptop can connect to the internet, but cannot find the shared drive. I have tried turning off my laptop firewall, the server firewall, both firewalls etc with no success. In my Local Area Connections I have the following all enabled "Client for Microsoft Networks", "File and Printer Sharing for Microsoft Networks", "QoS Packet Scheduler", "Internet Protocol (TCP/IP)".
View 5 Replies
View Related
Mar 7, 2013
How do i create and manage 40 user accounts on a windows 7 PC.
View 1 Replies
View Related
Feb 22, 2013
We have a network drive (drive with Rj45 port) and it is shared by many computers. Frequently we are facing a problem while opening a file and we get the error message "The file is opened by another user" and can open only as ready only.
How can I find who has opened the file in the network drive?
View 6 Replies
View Related
Jul 24, 2012
Is it possible to have emails stored automatically on a network drive after email is been read by the user? I know for sure that on a mailserver there is a feature that can be set up to have a copy stored and than send it to the users application.
View 1 Replies
View Related
Jan 23, 2012
the shared resource was not created at this time
View 1 Replies
View Related
May 27, 2013
I managed to create VLAN 30 (mgmt) and VLAN 888 (blackhole) on this SG 300 switch. Now I've configured ports 1-6 untagged on VLAN 30 and left ports 7-8 untagged in VLAN 1. Port 10 is my uplink to my router, which config looks like this:
interface gigabitethernet10
spanning-tree portfast
spanning-tree guard root
switchport trunk allowed vlan add 30
switchport trunk native vlan 888
If I connect a device into port 7 or 8, I get no IP address from the relevant DHCP server on my router. Thus, I thought I could add VLAN 1 to the trunk, but here's the surprise:
swi01-zg-#configure t
swi01-zg(config)#int gi10
swi01-zg(config-if)#switchport trunk allowed vlan add 1
VLAN 1 : VLAN was not created by user.
View 6 Replies
View Related
Sep 13, 2012
Can a pix 501 firewall VPN be created with a 10 user restricted license? It seems impossible to get an answer because Cisco's black mailing EOL policy.
View 18 Replies
View Related
Oct 25, 2012
Our previous wireless router (Netgear Rangemax wpn802) died yesterday so I went out and bought a Western Digital My Net N900. The issue is that now anyone using the wireless signal can't connect to a shared network folder that they were previously able to connect to using the old router.
I'm not able to log into the old router to see any of its settings. I do have access to the server that has the shared folder - I just don't have any idea what needs to be set in order for the N900 to allow me through to the shared folder - whether it's on the router side or the server side.
[code]...
View 14 Replies
View Related
Nov 12, 2012
Region : Australia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I just upgraded from my factory default and found network sharing of my USB HDD was no longer working.It came down to two bugs in the latest firmware:Even though there is now the option to share without a password that option does not work and you still need a password.And that password is the factory default of "admin" even though I have set my own password.
View 1 Replies
View Related
Oct 6, 2011
I have an externaL free Agent Hard Drive that I have a corrupt folder on. I would first like to fix it but if not possible I would like to delete it.
View 1 Replies
View Related
Jan 12, 2011
I am using Win 7 Pro x32. When I use RDP to connect to another computer, I noticed that on the remote computer (sometimes) as well as on my local machine (always), it creates a "Z:" drive. It isn't like a mapped network drive though, it shows under Hard Disk Drives. The free space is the same as the C: drive. When you open it, it is the %TEMP% folder on my machine. Going to the run command and typing %TEMP% will show you the same contents as the Z: drive. When I close the RD Connection, the Z drive goes away. I have no clue what is causing this and I did a little searching and couldn't find anything that resembled anything close to this online. I saw the same thing happen on a Win XP machine earlier as well.
View 1 Replies
View Related
May 1, 2011
I am trying to create a shared folder accessible to anyone on the network.The folowing are my settings under advanced sharing settings.
-Turn OFF network discovery
-Turn ON file and print sharing
-Turn ON sharing so anyone with network access can read/write files in the public folder
-USE 128 Bit encryption
-Turn ON password protected sharing.
The settings are as follows for the folder.Under the security tab, User EVERYONE, full control. There are no deny settings anywhere.Under The sharing Tab-Advanced Sharing- Share this folder is checked. After clicking Permissions, the only uder in here is EVERYONE with full control.When someone else on another computer clicks on my computers name, it asks for a username/password. I do not wish to give out the username/password of any user on this computer. I created another user on the computer that has the shared folder. When that username and password is entered on another computer, the computer does not accept it, and requests the username and password.WITHOUT totally reconfiging the network settings on the computer to share the folder, how do I create a folder that will permit everyone to read/write from? If reconfiguring of the network settings are required, what settings do I need to change to ensure high security, and will permit anyone on the network to access this folder?
View 3 Replies
View Related
Mar 10, 2011
I'm trying to share all of my Itunes media (music, movies, apps, etc.) between three PC's. I have created a share of the entire hard drive which I have mapped on all three computers. Basic connectivity seems to be working fine. From each computer, I am able to read and write to the disk. In Itunes however, I created a library including everything I want to share, but Itunes is unable to save the library.When I check security options on the hard drive, I see that it is owned by an unknown user and I am unable to change ownership of the drive. The owner is listed as "Account Unknown S-1-5-21 plus a long string of numbers) I think that if I can take ownership of the drive, I can get iTunes to save the library. how I can change the account ownership of the storage drive? Trying to change ownership properties, I get an access denied message.When the drive is connected to a PC via USB, I am able to change its ownership, but it reverts back to the Account Unknown owner when connected to the router. All three computers are running Windows 7 64bit.
View 5 Replies
View Related
Jan 24, 2012
I need to share a folder on a machine to make a scheduled backup from a server.How can I give access to the server Administrator only?
View 2 Replies
View Related
Jan 21, 2012
I want to send a folder to other user in lan by ip address.
View 1 Replies
View Related
May 11, 2012
our office has 2 branches recently the static ip of the branch was changed to a different subnet. earlier it used to be
111.170.150.140 subnet mask (255.255.255.128) main branch router (1) ip which forwards all request to server (dmz) - unchanged
111.170.150.141 subnet mask 255.255.255.128 sub branch (2) router ip changed to 111.170.150.61 subnet mask 255.255.255.224
after this change i am not able to access shared folders on the dmz server (1) (111.170.150.140). i am able to ping the ip and also able to open remote desktop connections from sub branch (2).i suspect that it is because of subnet change as i was earlier able to access shared folders?How can we access the shared folders across the subnet? what settings to change?
View 7 Replies
View Related
Apr 19, 2011
I want to share the My Documents folder from an XP machine with ONLY one user (the administrator) on a networked Win 7 machine. I have turned off simple sharing on the XP machine. I hate XP!! So complicated to do anything. Anyway, under security, I have tried share this folder, and not to share folder. I have gone into Advanced and messed around with permissions, taking out Everyone, using Admin only, using Network. At one point I ended up not being able to access My Documents on the local computer and had to jump through many hoops to change ownership and disable read only so that the user could use her own files!The problem is, under Advanced in the permissions area, I cannot see the users on the remote pc to choose which one should be allowed access. how to actually find a particular user on the Win 7 pc and give ONLY that user permission to read (not to change) the files in My Documents on the XP pc.
View 3 Replies
View Related
