Send To LAN Server / Address?
Sep 6, 2011Whose address I would put in "Send to LAN server" within firewall rules for inbound services.
View 4 RepliesWhose address I would put in "Send to LAN server" within firewall rules for inbound services.
View 4 RepliesWe have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
I want to send a folder to other user in lan by ip address.
View 1 Replies View Relatednet send command not available on server 2008
View 1 Replies View RelatedI have a server with two adapters: 192.168.1.200 and 10.99.1.200, 10.99.1.200 connects to a cisco router 10.99.1.254 (which I have no access to). This connects via WAN to another network to transfer files to another company. 192.168.1.200 is connected to our local LAN. I have a service that uses FTP to get and send files to a server through 10.99.1.200. I recently had to switch our IP scheme from 10.99 to 192.168 and since then haven't been able to send files to the ftp server. My question is, would a router solve my problem? If so, would I; remove the 10.99 adapter, connect 192.168 to the router, connect the router to the switch, connect the 10.99 gateway to the new router (and update any appropriate routing tables on the server)? The service appears to have issues with using a dual homed server and updating it isn't going to happen anytime soon.
View 3 Replies View RelatedKerio Control with AD, DNS."Failed to send DNS query to server 127.0.0.1: 10049".
View 1 Replies View RelatedWondering if it's possible to send a VSA from my radius server to my ASA-5505 that will instruct the ASA to use one of several split tunnel lists I have created, based on the user name supplied in the Radius request.For example, I can send a VSA of "ip:inacl#1=permit ..." and the ASA will dynamically create an access-list for that user.Is there a similar VSA for split tunnel?
View 8 Replies View RelatedI have one server-A(windows 2008) installed one application called"host front" which gives athentication to connect Linux(mainframe console)server(SERVER B). These 2 servers are bihind the firewall.If one internal user who has the athentication to logine server-B ,tried to login server A,will get the" username and password"screen and once they enter the username and password ,will get the server-B screen.But if somebody try to connet via MPLS(we need to test MPLS site customers) from outside via ASA 5540 ,to server-A will get the "username password" screen and once enter the credentials,after 1 minitue will get error"http server faild to send datas to the server" and will not move to server -B screen.Where do you think is the problem?
View 3 Replies View RelatedI'm having an issue with the syslog.
My configuration is:
LAN A (RV042)<-> GW to GW tunnel <-> (RV082) LAN B
On LAN A, I got a NAS with a syslog server. On the RV042, I've set the parameters for the syslog server, and it's working fine. On the RV082, I've set the same parameters and noting is happening.
As troubleshooting, I've done the following:
-On the RV082, I can ping the NAS without problems.
-On the RV082, I've set my computer IP adress as syslog server IP and with packet analyser, I not seing any UDP packets.
I cannot get my server to send outgoing traffic through my network. I.e. If i try to connect to any of my services i get a very weak connection. Now, i can still CONNECT, i just don't get any data flow. I cant even PING the server internally, it just times out. Now, regardless of whether i use my internal IP/external domain, i get the same issue. I logged onto my computer and tried a speed test the download was normal (around ~20mbit) but the upload times out.
Here is the fun part, if i connect to the server using a switch, everything works fine! Is it my router or some stupid configuration issue? Router is a WRV54G (I hate this thing). Server is running windows 2008 and has a virtual machine.
I currently have 90 remote locations that have PIX501's. They are all running 6.3 on them. All of these locations are creating an IPSEC VPN to my ASA 5520 (8.4) at the data center. Web access at the remote locations is currently being handled with ACL thru split tunnels. This is getting increasingly not fun as I have to reach out and touch them one at a time whenever I have to allow more access to the net. Code...
I would like to keep my split tunnel (if possible) for ports 443 and 21. I allow access to "any" on those ports and have no plans to change it.
Can I send port 80 down the VPN tunnel to the Proxy/Web Filter and then return the results to the Remote Client.
I have a problem with that the ACE20 (A2(3.2)) does send the connections to a backup real server in the serverfarm. I will how to troubleshoot in this case ? This is serverfarm configuration.
serverfarm host fix-http
failaction purge
probe PROBE-TCP-80
rserver fix11
inservice standby
rserver fix12
Just installed a RV042 with dual wan connections. Would like to make the WAN 2 (new cable modem as well) the primary connection over WAN1 (DSL), however whenever I switch from WAN1 to WAN2 in Smark Link set up, our email server will not send mail out, even though nothing is blocking the connection.
View 0 Replies View RelatedI can't seem to send config changes to our syslog server on a 2950, I'm fine with 2960's and 3750's. The Cisco 2955 is using the latest IOS c2955-i6k2l2q4-mz.121-22.EA14.bin.
Here is what I have added:
logging buffered 64000 debugging
logging console informational
logging monitor informational
[Code].....
The only sylog message I get is "Configured from console by username on vty0 (10.1.1.35)
I have one server-A(windows 2008) installed one application called"host front" which gives athentication to connect Linux(mainframe console) server (SERVER B).These 2 servers are bihind the firewall.If one internal user who has the athentication to logine server-B ,tried to login server A,will get the" username and password"screen and once they enter the username and password ,will get the server-B screen.But if somebody try to connet via MPLS(we need to test MPLS site customers) from outside via ASA 5540 ,to server-A will get the "username password" screen and once enter the credentials, after 1 minitue will get error"http server faild to send datas to the server" and will not move to server -B screen.
View 1 Replies View RelatedCan i send "show conn" to syslog server? for example:
[code]...
ESTAB5082
When ever I create a network object in ASDM 6.0(3) the UI also wants to send the command 'asdm location (network object IP address)' to the device.What is the purpose of 'asdm locaction ....'? Is it telling the ASA-5540 that the IP address is allowed to connect to the device using ASDM?If that is the case why does 'asdm location xxx.xxx.xxx.xxx'get denerated for every network object I create?
View 3 Replies View RelatedAfter we have installed patch 5 on several ACS 5.2 server they aren't able anymore to write their backups to the sftp servers. I tried to search on the bug tool kit, but it seems to be broken when searching for the keyword "sftp". It's the same when I try to do a "copy logs" with sftp as destination.running a debug I can see,
acs/admin# copy logs sftp://10.1.115.11/,Collecting logs...,Username: backupuser,Password: ,6 [16376]: transfer: cars_xfer.c[301] [admin]: sftp copy out of /var/tmp/ADElogs.tar.gz requested,6 [16376]: transfer: cars_xfer_util.c[412] [admin]: resolved server to 10.1.115.11,7 [16383]: transfer: sftp_copy.c[75] [daemon]: Executing SFTP command: /usr/bin/scp -o StrictHostKeyChecking=no /var/tmp/ADElogs.tabackupuser@10.1.115.11://ADElogs.tar.gz,% Error: Transfer failed3 [16376]: transfer: sftp_copy.c[230] [admin]: sftp_copy ERROR: command execution failed,3 [16376]: copy: cm_copy.c[1226] [admin]: Logs archive transfer to url sftp://10.1.115.11/ failed retcode=-306,acs/admin#
I have configured my 2951 router to send logs to my Kiwi syslog server like below.
#logging 10.20.20.52
But I am not receiving any logs from my router, the same has configured on my asa5520 and its sending logs.
I am using Solawinds syslog and trying to get our Cisco routers send syslogs to our syslog server. I followed the procedure on Configuring Cisco Devices to Use a Syslog Server from [URL] Our Cisco swtches are all sending syslog messages but not the routers. I compared the config with our access switches but can't seem to find the problem:
Sample router config:
service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname WWF-RT1boot-start-markerboot-end-marker!security authentication failure rate 10 logsecurity passwords min-length 8logging buffered 4096logging rate-limit all 10logging console critical!aaa new-model!!
[Code] .......
is there a command that prevents the router from sending the syslog to the server?
I just turned my computer IP address changed. I tried to get a uk ip address for accessing some information on internet. But my computer stopped supporting internet server to access it. I got some information from the [URL]... but unable still to find access.
View 3 Replies View RelatedHow would i find a "server address"? It is for an app i downloaded on my phone, the app is for my job...it allows me to view my schedule, punch in/out, request time off, etc..Our company (lowes) uses Kronos, which all of our scheduling, payroll, etc is all thriugh and they came out with app but you have to have "server address" We are on the Workforce Central 6.1 Version Suite.. I tried finding it while at work yesterday with no luck, I only found site address of which I couldnt even pull up here at home.
View 2 Replies View Relatedcant find server name for address...(server) : time out..15 nod is join to server(win2008R2) but new of nod is join for network error : computer name change....Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:WINDOWSdebugdcdiag.txt.An error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain puya.org.The error was: "No records found for given DNS query."(error code 0x0000251D DNS_INFO_NO_RECORDS)The query was for the SRV record for _ldap._tcp.dc._msdcs.puya.orgFor more information
View 1 Replies View RelatedI have some questions regarding DNS server addresses,I have in my mind that what if i put a DNS server addresses on the internet connection to avoid connection fault.My questions is where can I get the DNS server addresses? and what is the function of this addresses?What is the connection of DNS server addresses to the Internet service provider?
View 1 Replies View RelatedHow can I find the name of a remote unix server if the client can only provide me the ip address which they use to connect?
View 5 Replies View Relatedi did just had a rogue anti-virus infection i did a removal of it AV Security 2012
View 1 Replies View RelatedWhats the difference between DNS Server and External IP Address? When I dump Ipconfig /all into a .txt file I see that it shows three seperate values for the DNS Server. My question is, since ipconfig /all does not give an external IP address, are they the same? Why are theyre three?
View 2 Replies View RelatedI am in search of a low cost network camera that i can see online, and by going on numerous sites, and conversations i end up with dlink network camera. They are:
-DCS-932L
-DCS-2121
The best part about these are you just have to plug and view online.But now I am having one problem, the d-link people say that i can only see the video or image on mydlink.com otherwise I have to provide a dedicated IP address to the camera. And I want to view this camera via server IP address. Is there a way that I can configure the camera to my server IP address.If any one has used or know the camera which can be view online via IP, The main thing that I am trying to say is that i will extract the image via server ip and use it accordingly.
I can't find wins server,where is situated?
View 1 Replies View Relatedi have trouble accessing 192.168.0.254 for setting up my device. it says cannot access server.
View 1 Replies View RelatedWe once had a virtual server with two network adapters, one was internal and the other was external, and people could access it directly from the internet.
That server recently, died (someone put the .VHD file on a massive RAID 0 array, and that went boom), and I need to set it back up again. All the DNS entries appear to still be there, but how to assign the external IP to the network adapter. I tried Google, but my Google-fu must be weak today as I can't find anything useful.
It's a Server 2008 R2 machine running inside Hyper-V. Nothing's changed except for the new Windows install, it's running with the exact same VM settings, which I didn't touch except to add a new VHD.
my Laptop is about nine years old, HP Pavillion Pentium 4. I run Windows XP Home Edition Version 2002 SP3. I use a broadband card from Verizon that I just put in my USB (no router, etc) I'm getting a System Error Source DHCP Event ID 1002. When this happens, my computer, I believe, is going into sleep mode and I have to reboot the system. When I turn it back on and go back on the internet, all my websites that I was in are still there. The error says: The IP address lease 10.170.223.48 for the Network Card with Network address 2c3068c16ED1 has been denied by the DHCP Server 10.173.229.86 (The DHCP Server sent a DHCPNACK message)The DHCP Server Service did not extend the lease on your computer's IP address, so your computer temporarily lost its connection with the Network. I tried the ipconfig /release and ipconfig /renew. I tried going in services.msc and going under DHCP and keeping it automatic but stopping it. I called Verizon and I believe he refreshed my Network settings (I think I knew more about the topic than he did) He said it was my computer, whatever. I just tried the static IP but it didn't seem to take. I restarted and it jumped back to automatic. My last guess is it's something to do with the time frame of when it automatically obtains the address and when it expires. When I do the ipconfig /all it shows only a two hour time frame before it expires. Today I noticed that my computer shut down/sleepmode at the exact time the ipaddress was obtained. So, is there a way to increase this time between obtaining and expiring?
View 7 Replies View RelatedI'm a heavy PC Gamer, I play games such as World of Warcraft, Borderlands, Call of Duty, Steam Games, I also know my way around fixing internet issues, But this one just seems to have gotten me off guard, Recently, 1-2 days ago, I was browsing the internet like a normal day, and It was late, so I decided to go to sleep, Turned my computer off, Woke up the next morning, Turned it on, It then shows that I kept getting kicked off the LAN for some reason, It was like this[CODE]
View 2 Replies View Related