Cisco :: Http Failed To Send Data To Server

May 8, 2012

I have one server-A(windows 2008) installed one application called"host front" which gives athentication to connect Linux(mainframe console)server(SERVER B). These 2 servers are bihind the firewall.If one internal user who has the athentication to logine server-B ,tried to login server A,will get the" username and password"screen and once they enter the username and password ,will get the server-B screen.But if somebody try to connet via MPLS(we need to test MPLS site customers) from outside via ASA 5540 ,to server-A will get the "username password" screen and once enter the credentials,after 1 minitue will get error"http server faild to send datas to the server" and will not move to server -B screen.Where do you think is the problem?

View 3 Replies


ADVERTISEMENT

Cisco Firewall :: 5540 Http Failed To Send Data To Server

May 7, 2012

I have one server-A(windows 2008) installed one application called"host front" which gives athentication to connect Linux(mainframe console) server (SERVER B).These 2 servers are bihind the firewall.If one  internal user who has the athentication to logine server-B ,tried to login server A,will get the" username and password"screen and once they enter the username and password ,will get the server-B screen.But if somebody try to connet via MPLS(we need to test MPLS site customers) from outside via ASA 5540 ,to server-A will get the "username password" screen and once enter the credentials, after 1 minitue will get error"http server faild to send datas to the server" and will not move to server -B screen.

View 1 Replies View Related

Servers :: Failed To Send DNS Query To Server

Apr 21, 2011

Kerio Control with AD, DNS."Failed to send DNS query to server 127.0.0.1: 10049".

View 1 Replies View Related

Cisco :: How Does Attached Device Send Data To Switch

Jun 13, 2012

How does a device attached to a Cisco IP Phone send data to the switch?a. As tagged (using the voice VLAN)b. As untaggedc. As tagged (using the data VLAN)d. As tagged (using the CoS value)The correct question is A in the book though it said that tagging is switch process PC's doesn't tag frames.

View 4 Replies View Related

When Nodes Send Data Through A Switch Does It Become Encrypted

Dec 1, 2012

Packet Sniffing is mainly used on non-switched networks to display data that was supposed to be sent to nodes other than yourself, allowing you to see information such as usernames and passwords etc.My question is, why can this technology not be used as easily on a switched network? When nodes send data through a switch does it become encrypted?

View 6 Replies View Related

4100E / Send Data On Multiple Interfaces?

Nov 21, 2012

I have a virtualization server with 4 network interfaces and connected it to a SAN. There are few virtual machines which writes data to the SAN.

I want to connect to the SAN with multiple interfaces to speed up the network.

Is it possible to send data on multiple interfaces? How can I configure it?

Computers are connected to san through switch.
SAN: Equallogic PS 4100 E
Switch: Dell Power Connect
Computer: Dell T610
OS: Centos 5
Virtualization: Kvm
NIC: 8

I am not sure about network card brand now.

View 1 Replies View Related

Cisco VPN :: ASA 5520 - SSL HTTP-Proxy TMG Authentication Failed

Jul 2, 2012

We have ASA 5520 as SSL VPN concentrator so users can access internal web from outside. Our internal web also has several internet URL. What we want is when user click internet URL in our internal web, ASA forward those request to internal proxy server. I already config proxy using port 8080 and username "companyuser" and password, but always have authentication failed on ssl vpn browser. We uses forefront TMG as proxy. Username and password have right to access Internet.

View 2 Replies View Related

Dell :: Unable To Send Data Out Of Laptop Inspiron 15r Using Bluetooth

Mar 9, 2013

i m not able to send data out of my laptop dell inspiron 15r (2013) using bluetooth but at the same time i m able to receive data instead.

View 1 Replies View Related

Cisco :: 2951 - Interfaces Send Netflow Data Despite No Flow Config Under Interface

Aug 17, 2011

Cisco 2951 w/ HWIC-4ESW
IOS 15.0(1)M5 
#sh ip flow int
Vlan533
ip flow ingress
ip flow egress
#
 
The SVI sends the flow data just fine, however I also continue to receive flow data from most other interfaces.
 
I have attached a screenshot of one of our netflow collectors indicating that many of the interfaces are sending flow data even though not configured to do so. We have two different netflow collectors, from different vendors and both confirm the same interfaces sending flow data.
 
Normally I wouldn't care and ignore it, however one of them uses a license limit by interface and is a bit problematic.

View 2 Replies View Related

Cisco Switching/Routing :: Cat 3750E Failed To Send HRPC Non Blocking Message

Mar 23, 2012

I have a stack of Catalyst 3750E switches.

IOS image :c3750e-ipbasek9-mz.122-55.SE3.bin

I have been seeing multiple occurance of the below message in the switch logs.

"Failed to send hrpc non blocking message"

I could not find a relevant reference for this message in the Cisco.com.

View 4 Replies View Related

Cisco :: Data Collection And UT Failed On LMS 4.0.1

Aug 17, 2011

I have a problem with the User Tracking and Data Collection on LMS 4.0.1 . I think It crashes every time or freezes. I Have this error if I lunch UT Acquisition :
 
Failed to start acquisition: Construction of XML data required for UT IS in progress. Please try After Some Time.When scheduling a CM data collection, I have this error: Data collection IS Already in progress.
 
I detected an error in ani.log line 12266: Exception in thread "Discovery" java.lang.AbstractMethodError: com. cisco. nm. ani. server. topo. Port Channel.portIfIndex ()
 
I successfully changed the name of the CiscoWorks server last week with the tool hostnamechange.pl.
 
Perhaps there was an impact on data collection ?

View 2 Replies View Related

Dell Latitude E6400 Laptop - Wifi Network Connects But Does Not Send Or Receive Data?

Jul 11, 2011

So i have a dell latitude e6400 laptop running windows XP. Now whenever I connect to my home wireless network, it will connect fine but randomly it will stop sending or receiving data. Therefore i cannot connect to any websites and i get a connection error. I check my connection though and it is running through an excellent connection.

View 5 Replies View Related

Cisco Firewall :: ASA 5505 - Proxy Server Send Register To Hosted Server Private IP Changed

Aug 23, 2011

We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.

Here is debug log on real time monitoring.
 
Aug 24 2011    05:21:19    302015    203.xxx.xxx.226    192.168.1.51     Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011    05:21:19    607001    203.xxx.xxx.226         Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011    05:21:19    710005    203.xxx.xxx.226    99.xxx.xxx.107     UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063

Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.

View 2 Replies View Related

Cisco Wireless :: 5508 - Failed To Do Data Gleaning

Apr 3, 2013

Seen this error on 5508 controller with 3600i APs? WLC is running v7.3.101.0
 
*apfOrphanSocketTask: Apr 04 09:44:41.444: #IPV6-3-INVALID_ADDR_ORPHAN: ipv6_net.c:715 Invalid ipv6 address ::, failed to do data gleaning.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Failed Authenticate With Same Voice And Data Vlan

Apr 14, 2011

I have a question its posible to authenticate an cisco phone and PC with the same vlan(voice and data)when i do this configuratión , the phone and pc dont work. The phone display registering and never finished.interface FastEthernet0/5 switchport mode access switchport voice vlan 1 authentication event fail action authorize vlan 11 authentication event no-response action authorize vlan 11 authentication host-mode multi-domain authentication port-control auto authentication periodic authentication violation protect mab dot1x pae authenticator dot1x timeout tx-period 10 dot1x max-reauth-req 3 spanning-tree portfastend.

View 1 Replies View Related

D-Link DCS Network Camera :: DCS-5220 - Get Data From Database Failed

Dec 6, 2011

When i tried to play back my video this error message appear:

Get data from database failed.i have a few date in my database. I can only playback the video for half of them which is the older one.How to repair them?

View 1 Replies View Related

Send To LAN Server / Address?

Sep 6, 2011

Whose address I would put in "Send to LAN server" within firewall rules for inbound services.

View 4 Replies View Related

How To Configure Server To Act As HTTP

Jan 21, 2012

i had done inter-vlan routing , attached a DNS server to that network, i didn knw how to config a server to act as http??? so that i can view webpages forn systems of that network??

View 3 Replies View Related

Servers :: Net Send Is Not Available In Server 2008?

Aug 24, 2011

net send command not available on server 2008

View 1 Replies View Related

Unable To Send Files To FTP Server

Aug 14, 2012

I have a server with two adapters: 192.168.1.200 and 10.99.1.200, 10.99.1.200 connects to a cisco router 10.99.1.254 (which I have no access to). This connects via WAN to another network to transfer files to another company. 192.168.1.200 is connected to our local LAN. I have a service that uses FTP to get and send files to a server through 10.99.1.200. I recently had to switch our IP scheme from 10.99 to 192.168 and since then haven't been able to send files to the ftp server. My question is, would a router solve my problem? If so, would I; remove the 10.99 adapter, connect 192.168 to the router, connect the router to the switch, connect the 10.99 gateway to the new router (and update any appropriate routing tables on the server)? The service appears to have issues with using a dual homed server and updating it isn't going to happen anytime soon.

View 3 Replies View Related

Cisco WAN :: Http Web Server Setup - 861W

Mar 20, 2011

we are having some trouble setting up our router (Cisco 861W) webserver on the LAN so that it can be accessed from outside (http via port 80). When we try to access it via the web address, we just get the login window of the Cisco router software?

View 10 Replies View Related

Cisco Routers :: Cannot Send Syslog To Server From A RV082

Mar 9, 2013

I'm having an issue with the syslog.
 
 My configuration is:
 
LAN A (RV042)<-> GW to GW tunnel <-> (RV082) LAN B
 
On LAN A, I got a NAS with a syslog server. On the RV042, I've set the parameters for the syslog server, and it's working fine. On the RV082, I've set the same parameters and noting is happening.
 
As troubleshooting, I've done the following:
 
-On the RV082, I can ping the NAS without problems.

-On the RV082, I've set my computer IP adress as syslog server IP and with packet analyser, I not seing any UDP packets.

View 6 Replies View Related

AAA/Identity/Nac :: Possible To Send VSA From Radius Server To ASA-5505

Oct 26, 2009

Wondering if it's possible to send a VSA from my radius server to my ASA-5505 that will instruct the ASA to use one of several split tunnel lists I have created, based on the user name supplied in the Radius request.For example, I can send a VSA of "ip:inacl#1=permit ..." and the ASA will dynamically create an access-list for that user.Is there a similar VSA for split tunnel?

View 8 Replies View Related

Cisco Firewall :: 5585 Can't Access ASA HTTP Server

Jun 20, 2011

I just upgraded my ASA 5585 cluster from 8.2 to 8.4. I also upgraded the asdm .bin from 6.35 to 6.43. after rebooter the cluster, I try to access it with ASDM installed on my computer but it blocked at 17%.I tried to access [URL] but I just an error (with IE & FF) [code] What did I miss in the ocnfiguration ? I precise that I never used the http page, I already had the ASDM installed from another ASA.

View 4 Replies View Related

Cisco WAN :: C2950 No Support Ip Http Secure-server

Sep 16, 2012

I using IOS c2950-i6k2l2q4-mz.121-22.EA14.bin but no support command "ip http secure-server" and I not connect switch by CNA. How I fix ? Or IOS C2950 support ip http secure-server and ssh ver2 ?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: 3750 - IP HTTP Server (with No Authentication)

Dec 29, 2011

I have a customer who used to own a 3750 with a older version of IOS. The switch he had used a three year old version of IOS which allowed him to browse to the switch IP and manage it via HTTP without entering a password at all. Now that he has a replacement switch with a new ver of IOS (since the previous switch died). We slapped the config on from the old switch but no matter what we do (understanding that new http aaa authentication commands were added) we cant get this thing to let him in without prompting him for a password. I understand this was an insecure config to begin with so I shouldn't be advocating using it in the first place, but this is what the customer wants.Basically what I'm trying to figure out is are we banging our heads into the wall for nothing as the "ip http server" will not allow an authentication method of "none" anyway? None of the offical documentation I have read for the http aaa authentication cmds shows this as an example nor have I found any blog posts on how to do it ether. Perhaps Cisco removed this by design.

Here is the config: 
 
aaa new model
aaa authentication login default local
aaa authentication enable default none
aaa authentication login none none
 ip http server
ip http authentication aaa login-authentication none

[code]....

View 1 Replies View Related

Cisco VPN :: ASA 5520 - Send PIX501 Traffic Out To Proxy Server?

Mar 17, 2011

I currently have 90 remote locations that have PIX501's. They are all running 6.3 on them.  All of these locations are creating an IPSEC VPN to my ASA 5520 (8.4) at the data center.  Web access at the remote locations is currently being handled with ACL thru split tunnels. This is getting increasingly not fun as I have to reach out and touch them one at a time whenever I have to allow more access to the net. Code...

I would like to keep my split tunnel (if possible) for ports 443 and 21.  I allow access to "any" on those ports and have no plans to change it.

Can I send port 80 down the VPN tunnel to the Proxy/Web Filter and then return the results to the Remote Client.

View 4 Replies View Related

Cisco Application :: ACE 20 Does Send Connections To Backup Real Server

Aug 23, 2012

I have a problem with that the ACE20 (A2(3.2)) does send the connections to a backup real server in the serverfarm. I will how to troubleshoot in this case ? This is serverfarm configuration.
 
serverfarm host fix-http
  failaction purge
  probe PROBE-TCP-80
  rserver fix11
    inservice standby
  rserver fix12

View 2 Replies View Related

WRV54G - Server Cannot Send Outgoing Traffic Through Network

Dec 30, 2011

I cannot get my server to send outgoing traffic through my network. I.e. If i try to connect to any of my services i get a very weak connection. Now, i can still CONNECT, i just don't get any data flow. I cant even PING the server internally, it just times out. Now, regardless of whether i use my internal IP/external domain, i get the same issue. I logged onto my computer and tried a speed test the download was normal (around ~20mbit) but the upload times out.

Here is the fun part, if i connect to the server using a switch, everything works fine! Is it my router or some stupid configuration issue? Router is a WRV54G (I hate this thing). Server is running windows 2008 and has a virtual machine.

View 3 Replies View Related

Cisco VPN :: Connection For Accessing Server On HTTP Port Only - ASA 5520

Mar 10, 2013

We have ASA5520 and we want to configure a VPN IPSEC profile so that a partner of ours can access only a server and only on HTTP port.I've tried configuring split tunneling with an Extended ACL but probably I'm missing something. I just configured the ACL so that it included any source to our server's IP on HTTP port but when testing, it didn't work.
 
However, if I configure a Standard ACL on the split tunneling I can access the server and all the services it provides.Do you know if I'm missing anything on the Extended ACL configuration?
 
Should I configure this any other way?

View 6 Replies View Related

Cisco Routers :: RV042 Email Server Not Send Mail When Switch From Wan

Sep 28, 2011

Just installed a RV042 with dual wan connections. Would like to make the WAN 2 (new cable modem as well) the primary connection over WAN1 (DSL), however whenever I switch from WAN1 to WAN2 in Smark Link set up, our email server will not send mail out, even though nothing is blocking the connection.

View 0 Replies View Related

Cisco Switching/Routing :: 2955 - Send Configuration Changes To Syslog Server?

Apr 27, 2012

I can't seem to send config changes to our syslog server on a 2950, I'm fine with 2960's and 3750's.  The Cisco 2955 is using the latest IOS c2955-i6k2l2q4-mz.121-22.EA14.bin.
 
Here is what I have added:
 
logging buffered 64000 debugging
logging console informational
logging monitor informational

[Code].....
          
The only sylog message I get is "Configured from console by username on vty0 (10.1.1.35)

View 5 Replies View Related

Cisco Application :: 5082 - Send Show Connection To Syslog Server?

Aug 8, 2011

Can i send "show conn" to syslog server? for example:
 
[code]...

ESTAB5082

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved