Can Configure Camera To Server IP Address
Apr 4, 2012
I am in search of a low cost network camera that i can see online, and by going on numerous sites, and conversations i end up with dlink network camera. They are:
-DCS-932L
-DCS-2121
The best part about these are you just have to plug and view online.But now I am having one problem, the d-link people say that i can only see the video or image on mydlink.com otherwise I have to provide a dedicated IP address to the camera. And I want to view this camera via server IP address. Is there a way that I can configure the camera to my server IP address.If any one has used or know the camera which can be view online via IP, The main thing that I am trying to say is that i will extract the image via server ip and use it accordingly.
View 2 Replies
ADVERTISEMENT
Feb 18, 2013
I need an explanation on how to configure my ip camera......the step by step procedures and to to view it when am not at home or in the country!!!1
View 1 Replies
View Related
Oct 7, 2011
How can I configure DCS 910 webcam if I don't have the software CD?
View 4 Replies
View Related
Mar 29, 2011
i want to access my camera from my internet website, am using dynamic internet IP address "it's changed automatically every time. so i thought about the MAC address of the IP camera, i found some websites use the MAC address to link the camera [URL] and [URL] i want the configurations that i have to do to make this workout without static IP and without using a computer between camera and internet router.
View 7 Replies
View Related
Dec 29, 2012
I want to know how could I configure a Router Cisco DDR2201v1 for watching my IP Camera System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work.
View 2 Replies
View Related
Apr 26, 2011
Using Android phone and have to set up Port Forwarding to access the cameras. I have to change the IP Address to a static one instead of the one issued by the Router. How do I change the IP Address of the camera to one outside the DHCP range?
View 14 Replies
View Related
Apr 6, 2010
I'm trying to setup a DVR camera system and two web page server boxes behind a Linksys WRT54GL. The problem I have is that all of the devices want to use port 80 to generate the web page. Individually, I can get the boxes to work, but when I try to put it all together everything seems to fall apart. I've got to the DVR set to External port 80, Internal Port 80 IP address 192.168.1.254. The web page server box I try to set to External port 8001, Internal port 80, IP address 192.168.1.200, when I try to save this setting I get the error message Internet IP address and LAN IP address are in the same subnet. If I change the web page server settings to External port 8001, Internal port 8001, IP address 192.168.1.200, it will save the settings, but it won't work that way because it won't actually generate a web page when I try to access that port.The error message doesn't seem to make since as all I'm changing is the port number, not the IP address or subnet mask.
View 9 Replies
View Related
May 11, 2012
I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
View 2 Replies
View Related
Jan 25, 2013
I know the best thing one should do is install an ISA server and an Active Directory Domain Controller on separate servers. But for some reason, I want to configure my Windows Server 2003 as an ISA server as well as an Active Directory Domain Controller. What can happen to my server making it run improperly. For example, my ISA server will function mainly as a Firewall, I wonder if all the rules I create in ISA server determine what I mean it should work or I have to consider any affection from Active Directory DC to those rules?I have to ask this question because I've already installed both ISA and AD DC on my Windows Server 2003, already created an Allow. All rule (just for testing connection) in ISA server but I can't ping from all the clients to my server, all the clients can ping each other and the server itself can ping to all clients. I just think that may be the affection from AD DC to my AllowAll rule in ISA server.
I successfully created some rules that worked greatly as they should work but when I hadn't installed AD DC yet (just installed ISA), however right after installing AD DC, it still worked well (this made me think that AD DC didn't affect to how ISA works). Then I configured a little related to DNS server, and maybe something I don't remember exactly and now I can't ping from my client PC to my server. My network is virtualized using VMware 8 workstation and GNS3, at first there is no need of GNS3 because I just want to test my internal network (some clients connected to the internal interface of ISA server). Depending on VMware that I can't be sure if it is some fault of VMware or any other thing but my configuration on the servers.
View 5 Replies
View Related
Dec 25, 2012
at my home i have a d-link router i have configure the modem to set it to be the same ip address in my old file server ip..and now my wifi can't auto connect for my phone and laptop..they has to insert a static ip address to connect the wifi...
View 14 Replies
View Related
Oct 8, 2012
i received a public ip from my ISP and need to configure to enable access my server remotely
View 1 Replies
View Related
Mar 21, 2012
I'm using CCP to configure my Cisco 881, I need to assign my IP address range to the WAN interface (176.35.224.112/29), however everytime i enter the IP Address with a /29 subnet mask or indeed one of the usable addresses with a /32 I'm told I need to "Enter a valid IP address".I have also attempted to set the interfaces IP address via IOS directly and was also told the address was incorrect.
View 1 Replies
View Related
Nov 5, 2012
My current set up is 1 HQ router (2911 ISR) and 8 site offices with a non-Cisco router.Each site has an IPSEC tunnel back to the HQ router.All of the site routers have a dynamic external IP address.This set up has worked ok for now, but I would like to look at moving to GRE tunnels so traffic from the sites can be routed to each over.I have read up on the configuration and I can set up an IPSEC GRE Tunnel in test labs using a static IP address on the spokes however I have not been able to find any documentation on how to configure the HQ router to allow the tunnels from any IP address.I did try setting the tunnel destination to 0.0.0.0 on the HQ side but this does not work.
View 5 Replies
View Related
Mar 25, 2013
I have a test ASA 5505 at home. The DHCP IP address in my real home firewall is 192.168.1.x and as you are aware the default ip address in ASA is the same. how to configure the ASA.
In the link below there is an instruction, it seems it is working for everybody except me. I followed the instruction up and the only change was assigning the IP address, which I chose something other than 192.168.1.x But after the step of creating NAT, I do not have access to the internet. [URL] Also I followed the link below, but the revision of the ASDM in the instruction does not match with mine, so I was not lucky to figure the device.[URL]
1- How can I configure the ASA 5505 with an IP address different than 192.168.1.x (at home = no incoming static IP address = DHCP on subnet 192.168.1.x for the incoming internet) I have installed ASDM 6.3 on my laptop (From work) but when I connect to the ASA it wants to install ASDM 5.7.I tried to connect to the device through ASDM 6.3 and input the IP address 192.168.1.1It takes for ever and it does not connect to the device
2- How can I connect to the device by ASDM 6.3 or any ASDM with higher version than the original of the device?
View 17 Replies
View Related
Feb 25, 2011
I want to know, is it possible to configure VPN server over LAN? VPN server will have access of internet through ISP's Router. We have already purchased STATIC IP. I have tried it with Windows server 2003 for VPN server and Windows Xp with Client servers. But i;m unable to establish the connection between VPN server & VPN Client. IS there any software to diagnose that where problem exist actually.
View 1 Replies
View Related
Mar 29, 2011
I remember long ago I was upto some trial and error with my router and I ended up in changing some ip that I didn't know about that time, now when I was trying to forward some of the ports. I addressed the computer to 192.168.1.1 (as this was my ip that time I remember and on the box its written too) but it didn't respond, then I remember that I have changed this ip to something else and now I can't remember this.
View 7 Replies
View Related
May 4, 2012
I have a Cisco 1841 router with Fa0/0, Fa0/1 and Se0/0/0:0 interfaces. Fa0/0 is facing the LAN. At the moment WAN interface is Se0/0/0:0. It has following configuration:
View 5 Replies
View Related
Aug 26, 2007
how to configure an IPaddress for a PWR-RPS 2300?.I tried finding info on the website but no luck as yet. RPS 2300 will be used on stack of 3750E series switches.
View 3 Replies
View Related
Aug 31, 2006
I want to configure a MAC address on my asa 5520 interface.I ask you if exist a private MAC address range?
View 5 Replies
View Related
Jan 20, 2012
I have cisco aironet 1200 series Acess point i want to configure wep with mac authentcation .
 Â
If any document with GUI configuration
View 11 Replies
View Related
Apr 5, 2013
I am having a cisco 861 series router.The Cable from the isp was connected to fastethernet4(wan port)
Â
Following are my isp details
IP address:172.16.62.130
subnet:255.255.0.0
default gate way:172.16.62.1
dns primary:202.153.32.2
secondary:202.153.32.3
Â
How do i configure this details in the router and access the internet in my devices.
Â
i want the network to be in 192.168.1.0 to 254.
Â
how do i configure my router with this details using cisco configuration professional
View 1 Replies
View Related
Jul 17, 2010
I need to know how to configure SRP527w without a static outside ip address to establish a VPN tunnel with VPNC3000.
View 31 Replies
View Related
Oct 21, 2011
how to configure caching server .
View 3 Replies
View Related
Jan 21, 2012
i had done inter-vlan routing , attached a DNS server to that network, i didn knw how to config a server to act as http??? so that i can view webpages forn systems of that network??
View 3 Replies
View Related
Feb 26, 2013
I have a WAP321 I am trying to set up. It's connected to gi1/23 and the switch system mode is set to router. The rest of the network works just fine.I have an SG500-28p and the port. [code] On the WAP321 wizard, configured IP address on my management vlan and also configured the default SSID on that vlan. That works. (I plan to remove that one) Then I add the two SSIDs for vlan 20 and 22 (private and public access) and I can't associate to either of the two additional SSIDs. I haven't configured any other settings beyond the wizard and adding the other two SSIDs. I do want cisco mobile ios (jabber) to work on the private network and also do have a couple spa525g2s that need to connect wireless.
View 1 Replies
View Related
May 20, 2013
This is probably a dumb question, but I have read the 2960 stack administration guide and it does not explain how to configure the stack IP address. It says several times that the stack can be managed from the stack IP address, and that the stack IP address is a system-level configuration item. But it never explains how to configure the stack IP address.
View 3 Replies
View Related
Aug 13, 2011
i am trying to configure static ip on remote client user side , i am using the following doc as an example but i am not getting the ip which i am mentiong in the user .[url]...
View 10 Replies
View Related
May 10, 2012
I have a network setup where two servers from inside need to communicate with a remote network via 2 VPN gateways. The destinations are same. However, the chalange is each server need to follow it's own VPN gateway. Since i can't configure PBR (policy based routing) in ASA, can i configure something like MAC Address based routing. I can't use destination based routing since the remote network are reachable from the both VPN Gateways.
View 1 Replies
View Related
Jul 1, 2011
send me step by step guide of how to configure SNP server for SNMp trap
View 2 Replies
View Related
Oct 15, 2012
How to configure Radius server on router in packet tracer
View 1 Replies
View Related
Nov 12, 2012
My ISP provides me internet connection through password protecting Access Point bearing IP address 192.168.20.1 built with IP filtering which allows only a particular IP 192.168.20.88. I am not able to access internet on more than one computers simultaneously because router allows only single IP and I am not sure what are the WAN IP's uses Access Point provided by ISP eg. IP, Gateway and DNS. My ISP provides me static IP address for home computer as mentioned below :
IP : 192.168.20.88
Gateway : 192.19.20.1
DNS: 192.168.20.1
Alt DNS : 192.168.20.1
My public IP address is 180.87.210.26.
Is there any option to add a router to bride or configure router as proxy server so that i can access internet more than one PC's simultaneously.
View 5 Replies
View Related
Nov 29, 2011
currently we are using a proxy (192.168.45.90) for internet. the internal network ip scheme is 192.168.30.0-254. my problem is that how should i configure the new ISA2004 installation on separate PC with new IP range like 192.168.31.0-254 using that proxy 192.168.45.90.
View 1 Replies
View Related
Apr 26, 2012
As part of site to site VPN configuration, I need to configure VPN server & Client using Cisco 877 only.
View 1 Replies
View Related
