Make A Connection Between Ip Camera And A Website Using MAC Address?
Mar 29, 2011
i want to access my camera from my internet website, am using dynamic internet IP address "it's changed automatically every time. so i thought about the MAC address of the IP camera, i found some websites use the MAC address to link the camera [URL] and [URL] i want the configurations that i have to do to make this workout without static IP and without using a computer between camera and internet router.
View 7 Replies
ADVERTISEMENT
Oct 24, 2012
How would one go about setting up a camera in a workplace which was viewable via a website?
View 1 Replies
View Related
Jan 25, 2012
I have IIS running in a machine inside my network and I would like to make is visible to the world wide web.To do that, I created a website in the port 8787, which is accessible when the user types 192.168.0.126:8787 in the browser. Of course it works only when the user is inside my network.(IIS running over windows server 2008 OS)Now I want to make it visible to the WWW, so I created a rule to make a port forwarding to it:I went to: Advanced > Virtual Servers and created a rule with the given information:
enabled
Name: website
private ip: 192.168.0.126
protocol: both
private port: 8787
public port: 8787
Schedule: always
This rule created automatically a firewall rule
Enabled
Alow
Source: WAN *
Destination: LAN 192.168.0.126 Protocol: * Port range:8787
always
Unfortunately it isn't enough, if I type myPublicIp:8787 I can't access the website because I either get "connection reset" error or a timeout.I pluged my computer directly in my modem and it worked perfectly.To make a test, I tried to enable the router remote administration on the port 10001. It didn't work.ps: my wireless router is a dlink di-524, I am writing this in this forum because I couldn't find the one related to my router...
View 1 Replies
View Related
Apr 4, 2012
I am in search of a low cost network camera that i can see online, and by going on numerous sites, and conversations i end up with dlink network camera. They are:
-DCS-932L
-DCS-2121
The best part about these are you just have to plug and view online.But now I am having one problem, the d-link people say that i can only see the video or image on mydlink.com otherwise I have to provide a dedicated IP address to the camera. And I want to view this camera via server IP address. Is there a way that I can configure the camera to my server IP address.If any one has used or know the camera which can be view online via IP, The main thing that I am trying to say is that i will extract the image via server ip and use it accordingly.
View 2 Replies
View Related
Apr 26, 2011
Using Android phone and have to set up Port Forwarding to access the cameras. I have to change the IP Address to a static one instead of the one issued by the Router. How do I change the IP Address of the camera to one outside the DHCP range?
View 14 Replies
View Related
Aug 26, 2011
I actually have a query regarding ip addresses. We know that every domain name basically translates to set of 4 integers (in case of IPv4) which is basically the address of a website. But when we navigate to different pages of the same website, then do all of them have the same IP address?
View 4 Replies
View Related
Mar 18, 2011
i want to invisible my router ip.which command can do this.or how can configure registery to hide my router ip and surf safe.
View 5 Replies
View Related
Feb 6, 2011
I have set up DHCP reservations to assigned IP addresses based on MAC address. I have to block my kids access at times, and when I do this they simply change their IP address and they circumvent the blocking.Other than punishing the kids (which hasn't worked - and they need computers and Internet for homework), is there anyway to lock a computer to MAC address to IP address so if they change it they won't get network/internet access?I also tried to set up network filtering and I put in all the PCs and devices I wanted to provide access for, including the router, but when I save changes I can no longer access the internet or the router. I have to do factory reset to get back into router config.Also, I'm on 1.30WW. I know 1.34 exists, which I tried on a previous router which died and was replaced by RMA; but this didn't solve any problems.
View 6 Replies
View Related
Apr 27, 2011
if it is possible to block a website or ip address from an ASA 5505? if it is possible, can you give me an example of the commands to get it done?
View 2 Replies
View Related
Feb 19, 2012
I have a website that is hosted by our company, but when the staff goes to the outside address of th website it gets denied by ACL thus page not found.
3Feb 20 201211:25:23192.168.3.5752928our Extrenal IP80TCP access denied by ACL from 192.168.3.57/52928 to inside: our External IP/80,OUr external ip is also the ip of the 5505.
View 1 Replies
View Related
Jan 23, 2011
I'm running Ubuntu Server in VirtualBox. When I select the internal network option for the network adapter and start up the VM, I only get IPv6 address. I need an IPv4 address as well. My host (running Windows 7) gets has both an IPv4 and IPv6 address listed when I run ipconfig. When I run ifconfig on the guest (running Ubuntu Server), it only lists IPv6.
View 3 Replies
View Related
Jul 12, 2012
I recently installed a First Alert Security System and assigned IP address to the DVR but within the DHCP (After reading many threads, I will asssign, ping and create a static IP outside of the DHCP, maybe this will resolve the issue). I am able to view the cameras on my iPhone and HP Laptop but only internally on my network. I am trying to port forward my DVR IP address to be able to view the cameras on a public website. Although I am going to chcek and see if assigning an IP to my DVR outside of the DHCP and hopefully this will be it, I am afraid that my CradelPoint CRT 500 Modem will not support it. I read on one thread that this is a common issue after you have exhausted all the options. How can I be sure that my modem supports that my router port forwards? I want to avoid configuring to run in bridged or pass-through mode.
View 3 Replies
View Related
Aug 9, 2012
I have Latitude E6410 and connect to internet through wireless network to Zyxel ADSL modem. My problem has started 20 days ago when I was connected then I was disconnected from internet. The status is as below:
- I can ping the modem which means the laptop the link between modem and laptop is working while I can not ping any address or website even the provider's DNS. At the same time, if I connect the LAN cable, every thing is working properly. I tried with different laptops and there was no problem. To resolve the problem temporarily, I have to restart the modem or change the IP for my wireless card. In this case it works for another 30-60 minutes. the issue is the same when I use different modem.
View 1 Replies
View Related
Jun 14, 2010
I've been given the task of blocking access to certain websites, facebook, youtube, etc The router is the Cisco Linksys WRT120N
Ive entered the web addresses in the Website Blocking by URL Address boxes on the internet access policy page but it doesnt seem to work no matter how i do it.
Ive tried to deny internet access but that shuts of all internet access.
View 9 Replies
View Related
Apr 24, 2011
I am wondering if I can make our WAP4410 fall under two ip address ranges. I want to have a network for the office users and one for the guest users. We currently use a Safe@Office500WP Checkpoint router. It allows us to create multiple network ranges. We have the office users wireless under 192.168.0.1 ip range and the Guest Wireless is under the 192.168.200.1 range. Do I need two access points or can this be done with just the one?
View 7 Replies
View Related
May 11, 2012
I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
View 2 Replies
View Related
Jun 25, 2012
I am trying to confgure a VPN connection on a Cisco ASA 5505, and I am supposed to translate the inside network from 10.200 76.0 to host 10.1.4.204, and then from that scheme establish a VPN with the host 66.179.80.108 on network 192.168.50.0/24. I was told that this Cisco ASA appliace would be able to translate the network address as a mask in order to make the necessary connection with the other site connection.
View 6 Replies
View Related
May 23, 2013
I've got a Cisco 1941 setup working fine for Cisco Anyconnect. Clients can connect to local resources fine. The issue I have is I need the remote clients to access a third party IP address but to do so they must do it through the VPN. At the moment only local resources are accessed across the vpn and if they need internet they use their own internet connection they are connecting with.I've added the below to make sure traffic going to the IP is going across the VPN.
View 4 Replies
View Related
Nov 29, 2011
Basically I have a group of static public IPs and I need one of them to point to an internal server IP address. This is for the RVS4000 router.
View 3 Replies
View Related
May 3, 2011
I have a XSR-1805 (Version 7.5.0.0) enterasys router here. Got SNMP server to work successfully. The thing is that I couldn't make the router restrict a range of address allowed to use a community. Only 10.1.0.13 is allowed to use SNMP in this case.
View 1 Replies
View Related
Dec 31, 2011
Having just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public network address '#### - Guest' which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.
View 1 Replies
View Related
Dec 8, 2011
I know the CSS is too old but I have one in production environment and I was asked if it is possible to CSS to make NAT from inside addresses and translate them into one external IP address to diferent kind of communications, for example: 172.16.4.9 and 172.16.4.10 (inside addresses) should start connection to external IP addresses destinations 50.50.50.50 / 60.60.60.60 70.70.70.70 / 80.80.80.80 and so on, the default gateway to those Servers is the CSS and I would like to know if it is possible that all connection to external world to be translate into one IP address 172.16.4.100.
My CSS is 11503
Version: sg0810106
View 2 Replies
View Related
Oct 13, 2010
I have just purchased a DCS 2121 (I assume that it is a similar model to the DCS 920 in US).I have this setup:
- Connected the DCS 2121 wireless to my Belkin Router with a fixed IP address. Firmware version 1.4 is installed on the camera.
- I have a Synology 209 NAS server with surveillance station that I have connected to the Camera.
I all works fine for 5 minutes to a couple of hours at which point the DCS 2121 loose connection to the Router and does not try to reconnect. If I turn the Cam on and off it will reconnect - and then loose connection again af a short time.This is totally frustrating since the purpose of the Cam is to work as a surveillance cam - it kinda loose its value by not being connected...
View 1 Replies
View Related
Jan 8, 2012
Or, does the data only go over the WAN connection when the camera is accessed via myDlink? I ask because I have this camera installed in my mountain home and the WAN connection is a 5GB/month Verizon USB modem. It seems to be chewing up a LOT of data.
View 2 Replies
View Related
Mar 26, 2013
E4200v2, firmware 2.1.39.145204
Router says "Invalid IP address" when I try to make a manual IP address reservation of the IP address range.
Example: local network 192.168.1.0/24, where .1 is a router, .2 is a reservation, .20-.50 is a range for DHCP.
Before upgrade I didn't have this problem.
View 6 Replies
View Related
Aug 29, 2011
I installed my camera a week ago and have since noticed every 15 minutes (only while the camera is plugged in) or so I would lose my internet connection. A message comes up at the bottom of my screen that says 'local area connection. A network cable is unplugged'. It takes 15-20 seconds for the connection to be re-established.
I called my ISP and asked if there were any settings on my router I needed to change since the camera install but they told me 'no' and I should contact tech support for the camera.
View 14 Replies
View Related
Jul 20, 2012
I'm having trouble with one of my DCS-930L cameras. I have successfully installed it and it's connected wirelessly to a Dovado router. However, after some 2 weeks the wireless connection drops and I can't connect to the camera anymore. As the camera is 350 km away I can't restart it. This happens everytime and the last time I was around the camera and indeed the camera LED was green. I restarted it by pulling the powercord and after that the camera worked for som 2-3 weeks and then the same problem again.I have 4 cameras, and it's always the same one that drops the connection and the router is only some 5 meters away from the camera. No walls between the router and the camera. I have the ability to restart the router with an sms, but that doesn't make the camera reconnect.
View 2 Replies
View Related
Feb 11, 2013
In my Ipad (I have Dlink+), I can only see 1 minute of the Cameria 942L...the faq says that I need a conection witn Upnp.I have a Cisco EA2700 and I check the box of Upnp,,but I still cant see my camera from more than a minute,, then I have to reload.
View 2 Replies
View Related
May 13, 2012
XP.While doing the web-site, the connection/Comcast cut off abruptly. Afterwards, 'error' message popping up whether 'send' to MS or not. After closing and click to open the current web-site, things are OK.
View 4 Replies
View Related
Jan 25, 2011
I'm having issues accessing facebook from my system, it worked untill a few days back where its not opening and gives a message "The connection to the website was reset". I have tried every trick in the book. I'm on Windows XP Pro.
1. I tried accessing the site from IE6 opera and mozilla still no luck.
2. I disabled my firewall and antivirus
3. Zonal Alarm and avira
4. I also uninstalled both and tried nothing worked.
5. Im able to ping the site and also did a tracert.I also flushed the dns and winsock.
View 7 Replies
View Related
Feb 6, 2013
I can't access the following a specific website from any computer in my house. I am able to access all other sites. I have tried Firefox, IE, Chrome. All i get is the following error: "The connection has timed out" I called my ISP this morning, and they asked me to try adding a proxy server in IE. That is, Internet Options > Connections > LAN settings > Proxy server > proxy.tpg.com.au:3128, After doing this i was able to access the site! What could this mean?
View 3 Replies
View Related
Oct 25, 2011
Should i get a wireless adapter Or a wireless repeater Which would be better for a better connection?My router is down stairs and my xbox is upstairs.I could get the wireless adapter upstairs then do an ethernet cable straight to my xbox.
View 7 Replies
View Related
Aug 8, 2011
I'm using XP SP3. I'm trying to connect using the Local Area Connection for the first time. Up to now I've been using wireless but I'd like to get better performance.
Here are my current settings via IPconfig:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
I've tried releasing and renewing via IPconfig. Renewing gives me the following error message: An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.
I've got limited connectivity. It's trying to send but cannot receive.
View 5 Replies
View Related
