D-Link DIR-655 :: How To Make Sure PC Only Use 1 Assigned IP Address

Feb 6, 2011

I have set up DHCP reservations to assigned IP addresses based on MAC address. I have to block my kids access at times, and when I do this they simply change their IP address and they circumvent the blocking.Other than punishing the kids (which hasn't worked  - and they need computers and Internet for homework), is there anyway to lock a computer to MAC address to IP address so if they change it they won't get network/internet access?I also tried to set up network filtering and I put in all the PCs and devices I wanted to provide access for, including the router, but when I save changes I can no longer access the internet or the router. I have to do factory reset to get back into router config.Also, I'm on 1.30WW. I know 1.34 exists, which I tried on a previous router which died and was replaced by RMA; but this didn't solve any problems.

View 6 Replies


ADVERTISEMENT

D-Link DIR-615 :: Laptops Keeps Losing IP Address / Gets A Self-assigned IP Address

Aug 23, 2009

I recently switched routers to the DIR-615 and I'm trying to troubleshoot why one of our laptops keeps losing the IP address and gets a self-assigned IP address.  I see the following messages in the log, I am wondering if the reason codes are listed and explained somewhere?  I tried searching the manual but could not find any information.

View 9 Replies View Related

Computer Name Returning Address Different To Assigned One

Sep 1, 2011

I have 2 servers. 1 is a terminal server windows 2003 sb terminal server.(working fine) and the other is server 2003 small business DC configured with dhcp, dns, SQL, & wins. Last week one of the network programs that is located on the DC started refusing connections.So doing some trouble shooting I noticed that when I ping the server name I get a local address of *.*.*.42 when the address the machine is assigned is *.*.*.5. When I do an Ipconfig /all on the DC it only shows the *.*.*.5 number. I look in DHCP and *.*.*.5 is reserved for the DC Computer. And the *.*.*.42 isn't even in the address leases. I have also looked through the DNS settings and see no alias with the .42 number. And the number does not show up in the reverse lookup zone either.

View 5 Replies View Related

Protocols / Routing :: Any Way To Get IP Assigned To Physical Address?

Apr 12, 2012

Is there any way to get an ip address through it's physical location? I was asked this by a friend and it's a good question. We know how to get the physical address by it's by coordinates, but is it possible to reverse it, getting the ip assigned to the physical address?

View 3 Replies View Related

Airport Has Self Assigned Ip Address And Will Not Be Able To Connect To Internet

Jun 12, 2011

I just rebuilt my network and I've encountered a problem with my wireless access. Right now I have a Dlink 2540B modem/wired router.To that is connected an 8-port Dlink 2208 Switch and a Linksys WRT110 wireless router. All the desktops connect via ethernet to the switch and everything is working fine. I just added the WRT110 and specified it would be a secondary router on the network but as soon as I got it connected it killed my internet. I assumed this was because of DHCP being enabled, which was true once I logged in and looked. I of course disabled it and now the internet is back up on the wired portion and I can connect to the wireless router as well. But the only problem now is that my wireless devices are not being assigned IP's at all. Specifically, my Mac says "airport has a self assigned ip address and will not be able to connect to the internet"How are IP's assigned to wireless devices that connect to the network via a wireless router with DHCP disabled?

View 1 Replies View Related

Cisco WAN :: 892 / Static Ip Address Assigned To The Interface?

Feb 7, 2012

configure my cisco 892 router want a static ip address assigned to the interface because and I have no more internet on the router because am working on my network academy for CCENT?

View 28 Replies View Related

Cisco Wireless :: AIR-AP1041N-E-K9 / AP Not Getting Ip Address Assigned

Apr 21, 2012

I have a problem with my AIR-AP1041N-E-K9, i do not seem to get an ip-address assigned after a reset to factory defaults.I do see the AP with CDP:

Device-ID: ap
Advertisement version: 2
Platform: cisco AIR-AP1041N-E-K9
Capabilities: TransBridge IGMP
Interface: gi5, Port ID (outgoing port): GigabitEthernet0
Holdtime: 163
Version: Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)

[code]...

I also noticed that when i connect to the AP via console-cable, i can see the AP boot up in the console session, but then i do not get a login prompt, but it seems like the AP is responding; if i shutdown the interconnecting link between the switch and the AP, i do see log messages appearing in the console-connection.I have tried to debug on the Switch, but i need a password, so i can debug, which i do not have.,

View 2 Replies View Related

Protocols / Routing :: Change Assigned External Ip Address?

Mar 30, 2011

How can I change my external IP address which is assigned

View 1 Replies View Related

Cisco WAN :: 5500 - Way To See Expired Guest Users / Assigned IP Address?

Mar 21, 2013

We recently implement WLC 5500 Series, I found out guest user once period of that user expired it will not appear at lobbyadmin page where you can see list of users.

Is there any way to see expired guest users and also IP address which assign to guest user?

View 2 Replies View Related

Cisco VPN :: ASA 5505 - IP Address Assigned By Pool Not Reach LAN Network

Nov 13, 2011

I've configured vpn ipsec with wizard but my ip address assigned by pool not reach the lan network ,lan network: 192.168.0.0 /24,pool network: 193.168.0.0 /24

View 12 Replies View Related

Dell Inspiron 530s Desktop Running Vista SP2 - Self Assigned IP Address?

Dec 1, 2011

I have a Dell Inspiron 530s desktop running Vista SP2. When I attempt to get online using a cable or a wireless USB adapter I get a self-assigned IP Address. When I manually add an IP and DNS addresses I can't get online also. I have removed my security software (webroot) and have disabled Windows Firewall.The same ethernet connection works on another one of my computers fine.

View 14 Replies View Related

Cisco Switching/Routing :: 120 IP Address From Incorrect Scope Is Assigned From DHCP

Jul 8, 2012

I am trying to setup VLANs and most of configurations are working ok now except IP address assignment from DHCP. If any computer in VLAN 120 or 130 configured with manual IP address, then all works fine. It can reach internal servers and the internet without problem.If the IP address is assigned automatically then any computer in VLAN 120 or 130 are obtaining  IP address (strangely!) from VLAN 100. Because switch ports that connected to the computer belongs to VLAN 120 or 130, the computer cannot reach internal servers and the internet with ip address from VLAN 100 . All SVI interfaces for VLAN 100, 120 and 130 have ip helper-address option defined pointing to the DHCP server. No DHCP snooping enabled on all switches at this point. DHCP server have three scopes for the three different VLANs.

View 2 Replies View Related

Cisco Switching/Routing :: Aironet 1200AG - Cannot Connect To Assigned IP Address

Oct 8, 2012

We have a Cisco Aironet 1242 AG Series which we are trying to setup. The DHCP assigns the IP address, but we cannot connect to it. We have had this problem with a previous Aironet unit, which this new one we have got now is also having the same problem!Everything seems to be correct, but we cannot get to the IP address to set it up.

View 12 Replies View Related

Way To Make My Router IP Address Invisible

Mar 18, 2011

i want to invisible my router ip.which command can do this.or how can configure registery to hide my router ip and surf safe.

View 5 Replies View Related

Make A Connection Between Ip Camera And A Website Using MAC Address?

Mar 29, 2011

i want to access my camera from my internet website, am using dynamic internet IP address "it's changed automatically every time. so i thought about the MAC address of the IP camera, i found some websites use the MAC address to link the camera [URL] and [URL] i want the configurations that i have to do to make this workout without static IP and without using a computer between camera and internet router.

View 7 Replies View Related

How Do I Make Ubuntu Server Get IPv4 Address

Jan 23, 2011

I'm running Ubuntu Server in VirtualBox. When I select the internal network option for the network adapter and start up the VM, I only get IPv6 address. I need an IPv4 address as well. My host (running Windows 7) gets has both an IPv4 and IPv6 address listed when I run ipconfig. When I run ifconfig on the guest (running Ubuntu Server), it only lists IPv6.

View 3 Replies View Related

Cisco Wireless :: Make WAP4410 Fall Under Two Ip Address Ranges?

Apr 24, 2011

I am wondering if I can make our WAP4410 fall under two ip address ranges. I want to have a network for the office users and one for the guest users. We currently use a Safe@Office500WP Checkpoint router. It allows us to create multiple network ranges. We have the office users wireless under 192.168.0.1 ip range and the Guest Wireless is under the 192.168.200.1 range. Do I need two access points or can this be done with just the one?

View 7 Replies View Related

Cisco VPN :: 1941 - How To Make Remote Clients To Access Third Party IP Address

May 23, 2013

I've got a Cisco 1941 setup working fine for Cisco Anyconnect. Clients can connect to local resources fine. The issue I have is I need the remote clients to access a third party IP address but to do so they must do it through the VPN. At the moment only local resources are accessed across the vpn and if they need internet they use their own internet connection they are connecting with.I've added the below to make sure traffic going to the IP is going across the VPN.

View 4 Replies View Related

Cisco Routers :: RVS4000 / How To Make External IP Point To Internal Address

Nov 29, 2011

Basically I have a group of static public IPs and I need one of them to point to an internal server IP address. This is for the RVS4000 router.

View 3 Replies View Related

SNMP Couldn't Make Router Restrict A Range Of Address Allowed To Use A Community

May 3, 2011

I have a XSR-1805 (Version 7.5.0.0) enterasys router here. Got SNMP server to work successfully. The thing is that I couldn't make the router restrict a range of address allowed to use a community. Only 10.1.0.13 is allowed to use SNMP in this case.

View 1 Replies View Related

Linksys Wireless Router :: E1000 With 2 Networks - How To Make Guest Address Secure

Dec 31, 2011

Having just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public  network address '#### - Guest'  which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.

View 1 Replies View Related

Cisco Application :: CSS11503 / Make NAT From Inside Addresses And Translate Into One External IP Address?

Dec 8, 2011

I know the CSS is too old but I have one in production environment and I was asked if it is possible to CSS to make NAT from inside addresses and translate them into one external IP address to diferent kind of communications, for example: 172.16.4.9 and 172.16.4.10 (inside addresses) should start connection to external IP addresses destinations 50.50.50.50 / 60.60.60.60  70.70.70.70 / 80.80.80.80 and so on, the default gateway to those Servers is the CSS and I would like to know if it is possible that all connection to external world to be translate into one IP address 172.16.4.100.
 
My CSS is 11503
Version: sg0810106

View 2 Replies View Related

Linksys Wireless Router :: E4200v2 DHCP - Make Manual Reservation Of IP Address Range?

Mar 26, 2013

E4200v2, firmware 2.1.39.145204

Router says "Invalid IP address" when I try to make a manual IP address reservation of the IP address range.

Example: local network 192.168.1.0/24, where .1 is a router, .2 is a reservation, .20-.50 is a range for DHCP.

Before upgrade I didn't have this problem.

View 6 Replies View Related

D-Link DIR-615 :: Can't Log Into Admin To Make Changes

Dec 12, 2012

I have a DLink N300 (DIR 615), firmware 9.02NA.I've been trying to log into the "admin" but was only able to once. When I did get it everything was greyed out so I couldn't make any changes.

View 1 Replies View Related

D-Link DIR-615 :: Cannot Make Any Changes To Router

Jun 5, 2010

I am assessing my 615 router remotely using port 8080.  I can connect to it just fine but cannot make any changes to the router, they are ghosted out.  I am logged in as administrator.

View 9 Replies View Related

D-Link DIR-655 :: VPN / DMZ - How To Make It All Work

Oct 13, 2011

I have a client that is using a DIR-655 router. He uses Cisco VPN to access his work PC. At first, the only way we could get this to work was by skipping the router and plugging directly in to the modem. This is not ideal - so after receiving no response here to this question - I did the following - I put his PC (by IP) in a DMZ. This has done the trick - but will only work until the next time his IP address changes.

View 8 Replies View Related

Make Link Between Sys1 And Sys2 Without Ip Conflict?

Sep 6, 2011

I have two networks in same ip address sys 1 in 192.168.1.xxx sys 2 in 192.168.1.xxx where XXX = 0 to 254 i want to make a link between sys 1 and sys 2 without ip address conflict. is it possible to do so ??

View 4 Replies View Related

D-Link DIR-825 :: Make Virtual Server On Broadcast Ip For WOL?

Apr 25, 2012

I have an DLINK-dir 815 router.. I have tried for 10 hours to get broadcast IP to work, no luck.. All html/javascript modifications = no luck..The WOL works on LAN, but not over internet, so I figure it's the broadcast IP that needs to be virtual servered?

View 9 Replies View Related

TP-Link 3G/3.75G Router :: MR3020 - How To Make It Secure

Feb 7, 2013

Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :

Region : UnitedStates
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :
ISP : None

I'm a court reporter trying to set up a connection between my laptop and my court reporting machine, which has built in wifi capabilities. My court house has public wifi but there is always some interference which causes transmission between my laptop and machine to freeze. I was told I could create my "own wifi" between my machine and laptop if i bought a router. is this possible with this hardware?I don't need the internet or want an internet connection. I have the internal modem in my laptop. I just want to provide a connection between my laptop and writing machine wirelessly. That is, data being sent back and forth between the two. (Like your headset and smartphone connected with Buetooth). I can use the Bluetooth method to connect the two, but I opted for wireless connection because Bluetooth still can have some interference when attorneys come in the courthouse building with a Blackberry smartphone. I heard this router will provide a secured, private wifi connection between my laptop and machine.It doesn't say anywhere in the instructions that how to do this or I just don't know which method to use this router for what I want to do. Is it WISP, AP or BRIDGE, etc...?

View 1 Replies View Related

D-Link DIR-601 :: Can Make A Wireless Bridge Or Repeater

Nov 15, 2011

i just happened to have a spare DIR 601 and I already installed DDWRT on it. Now my question is can make this as a wireless bridge or repeater? with only using the signal of my DIR 655 router upstairs?

View 4 Replies View Related

TP-Link 3G/3.75G Router :: How To Make Hard Reset To MR3420

Apr 28, 2013

Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : openwrt-mr3420-v2-HM2013-04-19
ISP : Cellcom Israel

how to make hard reset to MR3420.I installed openwrt-mr3420-v2-HM2013-04-19 software to my router.and after that while the router restart the led green lights flashing on and of all the time.and I cant contact to the router with wifi or lan cable

View 5 Replies View Related

D-Link DIR-655 :: Make Computer Support Incoming VPN Connections?

Jan 27, 2011

I am trying to make my computer support incoming VPN connections.  I am using Windows 7 Home Premium on the computer I want to make the connection on.I am also using Verizon FioS internet (comes with default router/modem combo) to which I have the DIR-655 router connected.  I am able to connect to both WiFi's fine and they work correctly.I think the Verizon router is set to block incoming VPN connections and I think this is why I cannot get anyone to be able to access my computer / internet via VPN. How I can perhaps forward ports and which settings I would need to specifically change in both routers admin settings so that I can get VPN connections to forward to my computer and be accepted.

View 1 Replies View Related

D-Link DIR-655 :: Can't Seem To Make DDNS Setting Stick In Router

Mar 8, 2013

I just had to get rid of a bad DIR-825 that I replaced a trusty old DIR-655 with and now I'm back.  Anyhow, I can't seem to make the DDNS setting stick in the router.  All of the information is correct, but it doesn't seem to want to login.  When I click the enable check box, it tries connecting and then greys out and doesn't connect.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved