Cisco Wireless :: Make WAP4410 Fall Under Two Ip Address Ranges?
Apr 24, 2011
I am wondering if I can make our WAP4410 fall under two ip address ranges. I want to have a network for the office users and one for the guest users. We currently use a Safe@Office500WP Checkpoint router. It allows us to create multiple network ranges. We have the office users wireless under 192.168.0.1 ip range and the Guest Wireless is under the 192.168.200.1 range. Do I need two access points or can this be done with just the one?
View 7 Replies
ADVERTISEMENT
Oct 10, 2011
Contrary to the information contained in the link above, these two parts do not play well together. I purchased both and plugged them in and no go. It doesn't even light anything on the WAP. It worked fine when it was on its own 12V DC adapter but not plugged into this injector. What I don't understand is why Cisco doesn't just make a Universal power injector that is essentially a 1 port switch and is 802.3af or 802.3at compatible. Its maddening. It looks like I'm going to have to get an SD208P and waste 6 ports just to get one with the correct POE for the WAP4410.
View 2 Replies
View Related
Mar 22, 2012
Is there anyway to connect two different IP address ranges without setting up vlans? Trying to setup something so I can test out a device that uses "BACnet Broadcast Management Device" and I dont have two switches to create a vlan.
On site they have a couple of ranges setup with vlans
A 10.169.51.xx 255.255.255.0
B 10.169.52.xx 255.255.255.0
C 10.169.53.xx 255.255.255.0
D 10.169.54.xx 255.255.255.0
View 4 Replies
View Related
Aug 2, 2012
I have a client that needs a VPN with multiple network address ranges on the far end of the IPSEC tunnel. Is this possible with this RV180 unit?
View 1 Replies
View Related
Dec 21, 2010
Can you get a list of associated clients from an WAP4410N? How can you tell who's connected?
View 4 Replies
View Related
Jun 5, 2012
We have (6) WAP4410N units with hardware V01. What is the latest firmware version that I can use for this product?
View 1 Replies
View Related
Aug 9, 2010
I'd like to ask which Power over ethernet adapter will work in 100% with WAP4410 AP??
View 2 Replies
View Related
Jan 22, 2012
Currently I have an almost pure N environment, with the exception of 1 printer. My primary router is a WRVS400N v2, and the WAP 4410N is acting as a repeater. On the WRVS400N I have the option og g/n Mixed (which is what I use), but this option is not available to me with the WAP4410N.It seems like the WAP4410N is taking an all or nothing approach, as each speed is idividually available, or ALL speeds are available.What I would like to know is if this oversight will be resolved in a fufute firmware release so I can have both devices configured equally?
View 1 Replies
View Related
Dec 31, 2011
Having just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public network address '#### - Guest' which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.
View 1 Replies
View Related
Mar 26, 2013
E4200v2, firmware 2.1.39.145204
Router says "Invalid IP address" when I try to make a manual IP address reservation of the IP address range.
Example: local network 192.168.1.0/24, where .1 is a router, .2 is a reservation, .20-.50 is a range for DHCP.
Before upgrade I didn't have this problem.
View 6 Replies
View Related
Jan 22, 2012
I haven't got time to test different configurations yet. Just want to quickly ask here about the fall-over route-map configuration. I saw lots of example using pip prefix-list to specify the next-hop for tracking. Is that the only way you can do it? Can you just use a standard ACL to specify that host like permit host 10.2.2.2? ip prefix-list will do like ip prefix-list seq 5 permit 10.2.2.2/32. And you apply the prefix-list to route-map then. ACL will work?
View 2 Replies
View Related
Aug 24, 2011
I have ACS 5.1 configured to authenticate users based on Active Directory. I have configured wired 802.1x too, with machine authentication enabled on ACS.When I login with credentials that exist in AD, it works fine. Then I configured Windows Authentication to ask for credentials (popup window). But I experience network disconnection when I login with a local account even though I entered correct AD credentials.I want to do the following: for an account that exist on the machine being authenticated (non-AD account), ACS should check its local database and reply with authentication success if it finds it, so the user is granted network connectivity.I heard about Identity Sequence in ACS. But I still don't see the right configuration,
View 2 Replies
View Related
Nov 14, 2012
We have configured following commands on switch to fallback to local Vlan if both radius server (policy persona's) is found dead. For test purpose we shutdown both servers (policy persona's) but fallback didn't work. We have 3750 switch running image 12.2(55)SE6 having following configuration.We do not know whether we configured switch in proper way or do we need to modify it. [code]
View 5 Replies
View Related
Mar 18, 2011
i want to invisible my router ip.which command can do this.or how can configure registery to hide my router ip and surf safe.
View 5 Replies
View Related
Feb 6, 2011
I have set up DHCP reservations to assigned IP addresses based on MAC address. I have to block my kids access at times, and when I do this they simply change their IP address and they circumvent the blocking.Other than punishing the kids (which hasn't worked - and they need computers and Internet for homework), is there anyway to lock a computer to MAC address to IP address so if they change it they won't get network/internet access?I also tried to set up network filtering and I put in all the PCs and devices I wanted to provide access for, including the router, but when I save changes I can no longer access the internet or the router. I have to do factory reset to get back into router config.Also, I'm on 1.30WW. I know 1.34 exists, which I tried on a previous router which died and was replaced by RMA; but this didn't solve any problems.
View 6 Replies
View Related
Aug 10, 2011
Model: WAP4410N-A V02
Firmware version: 2.0.3.3
Deployed 3 of these as WAPs. No repeaters. They are spaced at least 50 feet apart over three offices, each in a server or switch room.
Across multiple laptops, and multiple WAPS, the wireless will function fine for a while with good bandwidth..then the connection will simply drop. By simply resetting the connection on the laptop or turning the wireless off then on, the connection typically returns, at least for a period of time before it drops again.
I’ve tried these configured as three separate SSIDs on identical channels, as well as one SSID for all three with different channels (preferred for a seamless wireless), and the behavior does not change either way.Based on some other threads, I tried forcing the LAN port speed to 100 mbps, but the problem persists.
View 7 Replies
View Related
Mar 29, 2011
i want to access my camera from my internet website, am using dynamic internet IP address "it's changed automatically every time. so i thought about the MAC address of the IP camera, i found some websites use the MAC address to link the camera [URL] and [URL] i want the configurations that i have to do to make this workout without static IP and without using a computer between camera and internet router.
View 7 Replies
View Related
Jan 23, 2011
I'm running Ubuntu Server in VirtualBox. When I select the internal network option for the network adapter and start up the VM, I only get IPv6 address. I need an IPv4 address as well. My host (running Windows 7) gets has both an IPv4 and IPv6 address listed when I run ipconfig. When I run ifconfig on the guest (running Ubuntu Server), it only lists IPv6.
View 3 Replies
View Related
May 23, 2013
I've got a Cisco 1941 setup working fine for Cisco Anyconnect. Clients can connect to local resources fine. The issue I have is I need the remote clients to access a third party IP address but to do so they must do it through the VPN. At the moment only local resources are accessed across the vpn and if they need internet they use their own internet connection they are connecting with.I've added the below to make sure traffic going to the IP is going across the VPN.
View 4 Replies
View Related
Nov 29, 2011
Basically I have a group of static public IPs and I need one of them to point to an internal server IP address. This is for the RVS4000 router.
View 3 Replies
View Related
Dec 8, 2011
I know the CSS is too old but I have one in production environment and I was asked if it is possible to CSS to make NAT from inside addresses and translate them into one external IP address to diferent kind of communications, for example: 172.16.4.9 and 172.16.4.10 (inside addresses) should start connection to external IP addresses destinations 50.50.50.50 / 60.60.60.60 70.70.70.70 / 80.80.80.80 and so on, the default gateway to those Servers is the CSS and I would like to know if it is possible that all connection to external world to be translate into one IP address 172.16.4.100.
My CSS is 11503
Version: sg0810106
View 2 Replies
View Related
May 3, 2011
I have a XSR-1805 (Version 7.5.0.0) enterasys router here. Got SNMP server to work successfully. The thing is that I couldn't make the router restrict a range of address allowed to use a community. Only 10.1.0.13 is allowed to use SNMP in this case.
View 1 Replies
View Related
Mar 18, 2013
I have a Cisco 880 (supplied by my company and as such I have little access to the control panel). I have a Linksys (Cisco) E1200 to use as an access point. Cisco setup (love it!) but the simple setup gives the E1200 an ip range starting at 192.168.1.1 while the Cisco 880 range is 192.168.185.113. I need to have all connections in the same ip rage (192.168.185.xxx) for remote monitoring. What is the best way to accomplish this? Bridge mode (I don't need Guest Mode which I read is not possible in bridge mode)? Disable DHCP on the E1200?
View 1 Replies
View Related
May 11, 2013
I want to prioritize League of Legends, a game which uses ports of ranging between 5000-5500. Does the WRT54GL "Application Priority" section allow for port ranges. If yes, have I put the range in correctly.
View 2 Replies
View Related
Jun 1, 2012
I am trying to trouble-shoot / map out a large network with a freaking butt load of over lapping IP addresses
View 8 Replies
View Related
Jul 25, 2011
Is it possible to connect two different ips together? A proxy server : 192.168.1.1. All the connections are going through this Server, everything is working fine if the ip range is 192.168.1.XXX Now, when i changed the ip range from 192.168.1.XXX to 192.168.2.XXX im not able to access network, Note: default gateway is the proxy server itself..
View 2 Replies
View Related
Nov 28, 2012
Here's the version of the ios i'm running:Cisco Adaptive Security Appliance Software Version 8.0(4)The issue i'm encountering seems to stem from the use of port rangesThe client states that while a port range is included within the running config, nmap tests within the server indicate that port as closed. Below is the list of port ranges being opened within the ASA[CODE]
View 1 Replies
View Related
Feb 24, 2011
Alright, well I have a Cisco 891w router and have just about everything up and ready to deploy. I'm primarily using Cisco CP 2.4 to provision the router with minor tweaks being done in the CLI. I want to set up a filter to allow access to roughly 20 websites for the majority of my network which is all on the same VLAN. The ip ranges are x.x.x.10 - x.x.x.169 which I have set into a Network Object group called limitac. The second group ranges at x.x.x.170 - x.x.x.199 and is called allowac. I have set up DHCP bindings for all the devices that will connect to the network but I want to set up a web filter for only the first group. I cannot seem to find anything in the Cisco CP manual or the IOS manual for setting up filtering for a range of IPs only. Primarily there are a few computers that need full access to the web while the others should only have access to the sites I set up in the filter.
View 14 Replies
View Related
Mar 27, 2012
I want to know what IP ranges are belonging for example to the AS714.
How do I get this information?
I know how to do the reverse way, which is easy with whois. But the other way doesn't seem to be that easy.
View 1 Replies
View Related
Apr 17, 2013
I have multiple AAA Clients that I need to add. The way I manage the clients, I often make changes of moving IPs from one group to another. I require that all clients use "IP Ranges". I try import the following IPs (8.8.8.1;8.8.8.3;8.8.8.9-10;8.8.8.25) I need them all to be ranges, but what happens is after I import it, I then go to that AAA Client, it makes them all "IP Range(s) By Mask" and siplays it like this.
View 4 Replies
View Related
Mar 6, 2013
I’ve been trying to figure out this for quite a while. I have a range of public IP addresses directly assigned on my dmz servers. The inside interface of ASA 5510 has one of those public IP addresses assigned (the default gateway for all dmz servers). Now I have a new range of public IPs that I also want to directly assign to new dmz servers. My goal is to have two distinct public IP ranges on dmz that should communicate between them. The inside ASA interface should be the default gateway for both networks.
View 1 Replies
View Related
Jan 2, 2013
I feel like this has probably been asked a thousand times over, but it doesn't seem to work for me. TCP works fine. I can't find any definitive answers, I'm still a novice with the IOS.
The purpose behind opening the ranges of UDP ports to the interface and forwarding is because the people in question want to run a VOIP phone from their home, but they have a home grade Internet connection, so therefore no static IP. Also, they're not going to pay for a router to create a S2S VPN.
Also, from one of the remote sites for which there is a VPN ( the 192.168.6.X/24 site), the audio is only one way. The phone guy says "i need to open ports both way through the VPN), but I feel like that's already been done??
For my other site ( 192.168.15.0/24 ) I have an IPSEC over GRE tunnel going, I don't know about the status of the voice phone there..or if its even made it there
Here's my config...i'm redacting things like public IP's, VPN keys, and the like
#show run
Building configuration...
Current configuration : 6525 bytes
!
! Last configuration change at 14:51:00 EST Wed Jan 2 2013 by ctouch
! NVRAM config last updated at 14:57:46 EST Wed Jan 2 2013 by ctouch
[Code]...
View 4 Replies
View Related
Jan 9, 2010
I'm trying to block internet access to a range of IP addresses using the Access Control function of the DIR-655 router. Unfortunately, the router does not allow me to block a range of IPs. Instead, I can only create policies based upon individual IPs or MAC addresses. I have over 60 machines I want to block Internet access and I'd hate to have to type them in individually. How do I go about blocking all Internet access (HTTP/FTP/email/everything) for a range of IP addresses? They will have to be able to continue to use the internal LAN.
View 3 Replies
View Related
