Cisco Wireless :: Which Power Adapter Will Work With WAP4410
Aug 9, 2010I'd like to ask which Power over ethernet adapter will work in 100% with WAP4410 AP??
View 2 Replies
ADVERTISEMENT
Cisco Wireless :: WAP4410 Doesn't Just Make A Universal Power Injector
Oct 10, 2011Contrary to the information contained in the link above, these two parts do not play well together. I purchased both and plugged them in and no go. It doesn't even light anything on the WAP. It worked fine when it was on its own 12V DC adapter but not plugged into this injector. What I don't understand is why Cisco doesn't just make a Universal power injector that is essentially a 1 port switch and is 802.3af or 802.3at compatible. Its maddening. It looks like I'm going to have to get an SD208P and waste 6 ports just to get one with the correct POE for the WAP4410.
View 2 Replies View RelatedCisco Wireless :: How To Tell Which Clients Are Associated With WAP4410
Dec 21, 2010Can you get a list of associated clients from an WAP4410N? How can you tell who's connected?
View 4 Replies View RelatedCisco Wireless :: WAP4410 V01 Keeps Going Offline
Jun 5, 2012We have (6) WAP4410N units with hardware V01. What is the latest firmware version that I can use for this product?
View 1 Replies View RelatedCisco Wireless :: Power Adapter That Can Purchase To Use With AP541N
Aug 9, 2010Is there a power adaptor that you can purchase to use with the AP541N.
View 4 Replies View RelatedCisco Wireless :: 1602i APs - Power Injector Or Adapter?
Jan 28, 2013We are planning a wireless network using the 1602i APs. Some of our APs might or might not be within the 100m limit from the switches, so we'll be running them as repeaters instead. Right now, we are planning on buying power injectors for everything, but I can't seem to find an answer to this question:
If I'm running an AP as a repeater (no ethernet running back to a switch), can it still receive power from a power injector and a short ethernet run between the injector and the AP? Or will I need to use a power adapter?
Linksys Wireless Router :: Lost Power Adapter For WRT54G
Apr 6, 2011I lost my power adapter for the WRT54G router. I have a 12V / 1000 mA brick adapter.
View 5 Replies View RelatedCisco Wireless :: Make WAP4410 Fall Under Two Ip Address Ranges?
Apr 24, 2011I am wondering if I can make our WAP4410 fall under two ip address ranges. I want to have a network for the office users and one for the guest users. We currently use a Safe@Office500WP Checkpoint router. It allows us to create multiple network ranges. We have the office users wireless under 192.168.0.1 ip range and the Guest Wireless is under the 192.168.200.1 range. Do I need two access points or can this be done with just the one?
View 7 Replies View RelatedCisco Wireless :: WAP4410 Acting As Repeating - Missing Modes
Jan 22, 2012Currently I have an almost pure N environment, with the exception of 1 printer. My primary router is a WRVS400N v2, and the WAP 4410N is acting as a repeater. On the WRVS400N I have the option og g/n Mixed (which is what I use), but this option is not available to me with the WAP4410N.It seems like the WAP4410N is taking an all or nothing approach, as each speed is idividually available, or ALL speeds are available.What I would like to know is if this oversight will be resolved in a fufute firmware release so I can have both devices configured equally?
View 1 Replies View RelatedUSB Wireless Adapter Doesn't Work?
Jun 16, 2011I purchased a used Compaq laptop with a Realtek USB wireless adapter. The laptop came with XP Pro. I connected the adapter and everything worked great. My husband got a virus I couldn't remove. I have the CD for XP Home so I did a clean install.Windows works fine. I connected the USB wireless adapter and ran the installation disk. When I open Realtek to connect nothing appears in the available networks. I checked the device mgr and it says Realtek is working. I turned off my 2Wire gateway and then reconnected it. I doubled checked that the Windows wireless utility is disabled. Still no available networks. Everything was fine before the reinstall of Windows XP Home.
View 5 Replies View RelatedCan't Get Wireless Adapter On Desktop To Work
Sep 22, 2012I can't get a wireless adapter to work on my newly purchased desktop. Tried 2 different brands, same result: After installing drivers, resetting wireless router etc. the wireless connection sometimes shows up but can't be connected to. I used:
1) TP link wireless adapter
2) Netgear N600 wireless dual band usb adapter.
The netgear one I'm using right now just says, "scanning" constantly. Here's diagnostics:
Host Name: MININT-SNNBPV2
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
[Code]....
Wireless Adapter That Will Work For Desktop?
May 15, 2012I own a dell demension 8300 OS Windows xp Professional. What would be a compatiable wireless adapter for my desktop pc?
View 1 Replies View RelatedHow Does Bluestork Wireless N Usb Adapter Work
Jan 8, 2013I have cable to connect to internet, and recently bought a Bluestork Wireless n usb adapter of 150 mbps, however when trying to connect to this wifi that appears onmy tablet it asks for a password, but I don't know what the WEP or WPA is.
View 1 Replies View RelatedWireless Adapter Work On Extreme-Z Mobo?
Aug 30, 2011Some guy from COMPusa gave me the pci version which didnt work.... so erm yeah.ill this pci-e version do the trick on my Extreme-z mobo?
View 1 Replies View RelatedWill E1000 N Router Work With A Wireless G Adapter
Jul 3, 2011I have a E1000 N router and I was wondering if I can connect a G wireless adapter to it. I am trying to connect it with my Sanyo LED HDTV, it has the port for a USB but I can't seem to get it to connect. I've tried manually setting it up but I seem to have done it wrong. The reason for trying to connect to the television is Netflix. I learned that you can watch it instantly on your Tv, using the Blue-ray or a basic internet connection. The Blue-ray I currently have is not an acceptable brand, so I am trying the basic internet connection.
View 1 Replies View RelatedWireless N Adapter :: DIR-655 And XBOX 360 To Work In 802.11n Mode?
Jan 7, 2011Seems like there those saying they have gotten there DIR-655 and XBOX 360 Wireless N Adpater to work in 802.11n mode. The adapter will only connect in 802.11g mode (and yes I have the correct adapter). I have set the settings to following
802.11 Mode: Mixed 802.11n and 802.11g
Wireless Channel 2.462 ghz - Ch 11
Transmission Rate Best
Channel Width 20/40
WPA-Personal
WPA2 Only
Cipher Type: AES
Does this router really work with XBOX 360 Wirelss N Adapater. If so, how has others got this to work.
Realtek RTL8187B Wireless Adapter Doesn't Work?
Nov 3, 2012I've found my old (1, or 2 years old) Realtek RTL8187B USB 2.0 Wireless Adapter. I plugged in into my PC, but it doesn't find any networks, but it works 100% on my laptop. On PC windows said, that maybe something wrong with the driver, I reinstalled it a few times, but same happened again, again. Both has Windows 7 Professional 64-bit.
View 13 Replies View RelatedInspiron M5030 Wireless Adapter Does Not Work Properly?
Dec 1, 2012I'm working on an M5030 that has a red X on the wireless and will not find any networks.
- The ethernet connection WORKS
- The fn+f2 wireless switch combo seems to do nothing
- I've updated the bios
- I've uninstalled and installed the latest driver
- I've installed external USB wireless adapter but it has same issue
- I've scanned for malware, all clean.
When I go to network adapters it has signal bars on the wireless adapter but when I right click -> connect disconnect -> nothing shows as available. If I diagnose, it just says there may be a problem with the wireless adapter. I've tried DISABLING ZoneAlarm firewall to no avail also.
Linksys Wireless Adapters :: WMP54G Ver 4 PCI Adapter Will Not Work
Nov 8, 2012I have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.
View 1 Replies View RelatedCabling / Cards :: Wireless-G Notebook Adapter (WPGC54G V1.2) Won't Work
Jan 17, 2012So I can't seem to get anything to work lately... Sad that I can't even get a wireless adapter running now...
So this is a new Wireless-G Notebook Adapter(WPGC54G v1.2) I just got in the mail today. I went to the linksys/cisco website and they only have version 1, 2, 3, etc. Mine says 1.2 so I tried version 1. After installing and following all steps it said the software that connects was inactive.
After searching the internet a bit I found a thread stating v1.2 is version 2. So, I downloaded version 2 and ran that. Now the software isn't inactive but it doesn't "connect" in the linksys software, show any wireless devices, or do anything. I went into device manager and found the wireless card, updated drivers manually, and selected the folder I downloaded from linksys website to search for update drivers. It all ran fine and said drivers were installed. Still won't work. LINK light is not on card, POWER is.
Using a Toshiba Tecra 9000. So my last attempt... I uninstalled everything and stuck the card in and let windows recognize it. Selected manual install, went to the folder I downloaded for ver. 2 to search for drivers. Said everything installed and did drivers successfully but windows says "wireless network unavailable."
Cisco Switches :: Power Adapter For WAP4410N?
Sep 6, 2012I would like to ask the correct part number of the power adapter on WAP4410N?
View 4 Replies View RelatedCisco Switches :: Power Adapter For SF302-08p?
Dec 27, 2012We are looking for a power adapter for a cisco switch Sf302-08p. We can't find the adapter anymore and we have to order a new one, but we can't figure out the order number of the adapter. The voltages is 48vdc and has an 4 pin connector . What is the type or ordernumber of this adapter?
View 1 Replies View RelatedWNR1000v2 - Using A Different Power Adapter For Router?
Mar 20, 2012I've lost the original power adapter that came with my wireless router (Netgear N150 Wireless Router WNR1000v2) and was wondering if it would be safe to use another power adapter with it instead. As long as the power adapter meets the the requirements of the router and fits, it should be okay to use, right? I'm just wanting to be safe before plugging it in. Don't want to damage anything.
View 1 Replies View RelatedXAVB200 Power-line Can Just Add Another Adapter
May 3, 2011I currently have a pair of NETGEAR XAVB2001-100NAS Up to 200Mbps Powerline AV 200 Adapters. Can I just add a third unit upstairs (like url...) and all three ports will have connectivity to each other?
View 2 Replies View RelatedHP SR2170NX / Will Wireless Adapter For A Desktop Work With Router Setup By DSL On Same Computer
Apr 25, 2011I have an HP SR2170NX desktop set up via DSL and cable to an ATT gateway router that enables wireless for my roaming with my laptop. The laptop works wirelessly even when the cable between the router and desktop is unplugged and the desktop turned off. I would like to equip the desktop with a Cisco-Linksys WMP54G Wireless-G PCI Adapter or similar PCI-card to allow for elimination of the cable between the router and the computer.
View 2 Replies View RelatedCabling / Cards :: TP Link TL-WN722N Wireless Adapter Refuses To Work On Windows 7?
Sep 7, 2012I have a TP link TL-WN722N wireless adapter and it refuses to work on my win7 machine. I've tried installying the cd driver, all the relevant drivers on the TP link website, and the generic atheros driver. I've also tried manually installing all those drivers using device manager to no avail, and it says "a device attached to your system is not functioning"
But I know the physical adaptor is working because I was able to successfully install it onto another computer (it was a windows 8 preview version).
Cisco Switches :: SRW208MP AC Power Adapter Part Number
Apr 13, 2010What is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?
View 11 Replies View RelatedCisco Routers :: WAP4410 Dropping Connections
Aug 10, 2011Model: WAP4410N-A V02
Firmware version: 2.0.3.3
Deployed 3 of these as WAPs. No repeaters. They are spaced at least 50 feet apart over three offices, each in a server or switch room.
Across multiple laptops, and multiple WAPS, the wireless will function fine for a while with good bandwidth..then the connection will simply drop. By simply resetting the connection on the laptop or turning the wireless off then on, the connection typically returns, at least for a period of time before it drops again.
I’ve tried these configured as three separate SSIDs on identical channels, as well as one SSID for all three with different channels (preferred for a seamless wireless), and the behavior does not change either way.Based on some other threads, I tried forcing the LAN port speed to 100 mbps, but the problem persists.
Connecting TPLink Powerline Adapter To Power Strip?
Sep 28, 2012I will be purchasing the AV200 powerline kit from Tp-link and want to know whether there will be any issues in connected them through either a power strip or double adapter?
View 8 Replies View RelatedCisco Switching/Routing :: 892 Power Adapter Orderable Part Number
Jul 29, 2012What is the orderable part number of Cisco 892 series routers.
View 1 Replies View RelatedLinksys Wired Router :: BEFSR81 V2 - Power Adapter Required
Jun 2, 2012From what I understand, it requires a 5V 2.5A adapter ... alas, cannot find one.
View 2 Replies View RelatedCisco Switching/Routing :: 6509 - After Power Failure SSH Does Not Work?
Nov 28, 2012We had power failure catalyst 6509 and after the device boot up ssh does not work any more below is error messages
line con 0
access-class 90 out
logging synchronous
[Code]....
XAVB101 Netgear Power-line Adapter Not Working With AMD Llano HTPC
Jan 3, 2012I have a NETGEAR XAVB101 Powerline AV Ethernet Adapter and an AMD Llano build HTPC which refuses to work with each other.
The power plug works well with my Gateway NV79 laptop and even my Intel Core i5 -2500K desktop, without any problems! I have also used it to connect to my Roku, Yamaha Network Receiver and other networked stuff and all worked great, just the HTPC seems to have issues connecting to the network!
The HTPC is AMD A6-3650 on a ECS FM1 A75 Mobo with Integrated Realtek RTL8111E Gigabit Ethernet Controller, which is what I am connecting the power plug to! Only the connection over the power line adapter does not work, it works great with both a connection directly from the router and with wireless!
The adapter has a 128 bit encryption push button security feature which I'm NOT using. When I connect it the HTPC tries to connect and fails and shows the network as connected to an unidentified network. My LAN drivers on the computer is all up-to-date!