Cisco Switches :: Power Adapter For WAP4410N?
Sep 6, 2012I would like to ask the correct part number of the power adapter on WAP4410N?
View 4 Replies
ADVERTISEMENT
Cisco Switches :: Power Adapter For SF302-08p?
Dec 27, 2012We are looking for a power adapter for a cisco switch Sf302-08p. We can't find the adapter anymore and we have to order a new one, but we can't figure out the order number of the adapter. The voltages is 48vdc and has an 4 pin connector . What is the type or ordernumber of this adapter?
View 1 Replies View RelatedCisco Switches :: SRW208MP AC Power Adapter Part Number
Apr 13, 2010What is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?
View 11 Replies View RelatedCisco Wireless :: WAP4410n Won't Power On?
Dec 4, 2012I have a WAP4410N that stopped powering on with PoE. The PoE light comes on but the Power and Ethernet light remain off. The link light comes on the port on the switch. I have tried multiple switch ports and tried a different switch.
View 3 Replies View RelatedCisco Wireless :: WAP4410N Output Power Setting?
Oct 27, 2009I have a WAP4410N and would like to turn down the power output below 100%.
It has a very strong signal, and is covering our small office and half the parking lot.
In the Administration Guide, under FAQs, it mentions a setting for output power but I cannot find this setting.
The SW version is 2.0.0.5, and that seems to be the latest version - the file I downloaded is WAP4410N-fw-2.0.0.5-K9.img but I haven't installed it yet.
WNR1000v2 - Using A Different Power Adapter For Router?
Mar 20, 2012I've lost the original power adapter that came with my wireless router (Netgear N150 Wireless Router WNR1000v2) and was wondering if it would be safe to use another power adapter with it instead. As long as the power adapter meets the the requirements of the router and fits, it should be okay to use, right? I'm just wanting to be safe before plugging it in. Don't want to damage anything.
View 1 Replies View RelatedXAVB200 Power-line Can Just Add Another Adapter
May 3, 2011I currently have a pair of NETGEAR XAVB2001-100NAS Up to 200Mbps Powerline AV 200 Adapters. Can I just add a third unit upstairs (like url...) and all three ports will have connectivity to each other?
View 2 Replies View RelatedCisco Wireless :: Power Adapter That Can Purchase To Use With AP541N
Aug 9, 2010Is there a power adaptor that you can purchase to use with the AP541N.
View 4 Replies View RelatedCisco Wireless :: Which Power Adapter Will Work With WAP4410
Aug 9, 2010I'd like to ask which Power over ethernet adapter will work in 100% with WAP4410 AP??
View 2 Replies View RelatedCisco Wireless :: 1602i APs - Power Injector Or Adapter?
Jan 28, 2013We are planning a wireless network using the 1602i APs. Some of our APs might or might not be within the 100m limit from the switches, so we'll be running them as repeaters instead. Right now, we are planning on buying power injectors for everything, but I can't seem to find an answer to this question:
If I'm running an AP as a repeater (no ethernet running back to a switch), can it still receive power from a power injector and a short ethernet run between the injector and the AP? Or will I need to use a power adapter?
Connecting TPLink Powerline Adapter To Power Strip?
Sep 28, 2012I will be purchasing the AV200 powerline kit from Tp-link and want to know whether there will be any issues in connected them through either a power strip or double adapter?
View 8 Replies View RelatedCisco Switches :: WAP4410N Set As Repeater And Not Connected To Gigabit Switch
Jun 30, 2012From the broadband modem/router connected with a Gigabit 8 port unmanaged switch. Then, one WAP4410N is connected to the switch, wired connection for a distance of 90 meters. WAP4410N is set as an access point to the area. Then the second WAP4410N will be run as a repeater to the first WAP4410N. My question is that, can we set the second WAP4410N as a repeater, without the need for it to be connected to the switch via ethernet cable.
View 7 Replies View RelatedCisco Switching/Routing :: 892 Power Adapter Orderable Part Number
Jul 29, 2012What is the orderable part number of Cisco 892 series routers.
View 1 Replies View RelatedLinksys Wireless Router :: Lost Power Adapter For WRT54G
Apr 6, 2011I lost my power adapter for the WRT54G router. I have a 12V / 1000 mA brick adapter.
View 5 Replies View RelatedLinksys Wired Router :: BEFSR81 V2 - Power Adapter Required
Jun 2, 2012From what I understand, it requires a 5V 2.5A adapter ... alas, cannot find one.
View 2 Replies View RelatedXAVB101 Netgear Power-line Adapter Not Working With AMD Llano HTPC
Jan 3, 2012I have a NETGEAR XAVB101 Powerline AV Ethernet Adapter and an AMD Llano build HTPC which refuses to work with each other.
The power plug works well with my Gateway NV79 laptop and even my Intel Core i5 -2500K desktop, without any problems! I have also used it to connect to my Roku, Yamaha Network Receiver and other networked stuff and all worked great, just the HTPC seems to have issues connecting to the network!
The HTPC is AMD A6-3650 on a ECS FM1 A75 Mobo with Integrated Realtek RTL8111E Gigabit Ethernet Controller, which is what I am connecting the power plug to! Only the connection over the power line adapter does not work, it works great with both a connection directly from the router and with wireless!
The adapter has a 128 bit encryption push button security feature which I'm NOT using. When I connect it the HTPC tries to connect and fails and shows the network as connected to an unidentified network. My LAN drivers on the computer is all up-to-date!
Cisco Switches :: SF-300-48P POE Is Power Cycling?
Dec 3, 2012I have a SF-300-48P that is power cycling all POE ports (in use) exactly every 30 minutes. The other older cisco POE switches we were replacing did not have this issue. We have about 40 cisco SPA942 IP phones connected to it. Power consumption is about 175 watts total.
This is my second switch, previously tried a SG500X-48P with the same result.
how to stop it from cycling?
Cisco Wireless :: 802.11 WAP4410N To WAP4410N Backhaul Using N Protocol?
Apr 30, 2011I have the following equipment:
Cisco 871W router
2x WAP 4410N APs running 2.0.3.3
I currently have 1 AP connected to the router via copper. The AP to AP link is over 802.11. I have attached a diagram reflecting the current topology.
The AP-to-AP link will come up utilizing B/G/N mixed mode; however, the connection is basically unusable. About 30% of the traffic is dropped, while the packets that do make it have a consistently volatile latency, anywhere from 15 to 1500 ms. I have had success using G-only and B/G mixed. The link is stable (I have had the best results with B/G). The problem is, I didn't buy the 2nd 4410N to run the G protocol. I would like to connect the APs running either B/G/N (hopefully negotiating to N) or N only. I am wondering if there is a certain configuration I can utilize (perhaps using WDS repeater or bridge versus Wireless Client/Repeater?), or a firmware upgrade set for release that can make this happen for me.
Cisco Switches :: SD208P - Does Not Seem To Power PoE Devices
May 3, 2012I have a Cisco SD208P. Is this a PSE of type A or B (endspan or midspan)? The switch does not seem to power PoE devices via the data pairs only.
View 2 Replies View RelatedCisco Switches :: SF-300-48P Power Failure - Need To Reboot
Apr 4, 2013We have several SF-300-48P switches, eveytime there is a power failure the switches need to reboot 2 or 3 times before they are able to route packets again.
View 1 Replies View RelatedCisco Switches :: Power Save Feature Of SG 102-24 Can Be Disabled
Jul 17, 2011Does the power save feature of the SG 102-24 can be disabled somehow ? Our college just purchased 24 of these switches. We are having a problem with the switches affecting some of our monitoring software (Vision from Nettop).Basically, the client pc's become invisible to the master station. I believe this is due to the ports doing an automatic shutoff.I know these switches are unmanaged, but I'm hoping they at least have some form of configurability. Right now our only option is to have an instructor cycle the power of the switch to get the client pc's visible again.
View 3 Replies View RelatedCisco Switches :: SG300-28P - POE Power Drops Every Several Minutes
Sep 10, 2012We have an SG300-28P which, at intervals between 5 and 30 minutes or so, drops power to all of its POE-powered ports and then immediately restores power. The switch logs nothing when this happens other than recording that the ports went down and back up, even with debug logging enabled. Non-POE ports are not affected.
When the problem started there were only four POE-powered devices on the switch and we are far under our power budget. (While testing I added a fifth device, see below.)
Not all combinations of devices cause the drops to occur -- specifically, it looks like having devices on ports near each other causes the drops. When the drops occur, the absent counters of all of the POE devices increment. I noticed this earlier thread here seemed similar: [URL]
but in that case, he got no power at all in the adjacent configurations, instead of having it drop every several minutes.
I'm running
sw06#sh ver
SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 )
Boot version 1.1.0.6 ( date 11-May-2011 time 18:31:00 )
[Code].....
Cisco Switches :: SG200-26 - Switch Power Loss
Aug 28, 2011We have 2 of the SG200-26 switchs. When ever we loss power all the settings are reset to default. Even if we loss power for 1 min. This includes the IP, user, password, etc. How can I change this so the settings are saved?
View 1 Replies View RelatedCisco Switches :: SG 200-08 - Configuration Changes Disappear On Power Cycling?
Sep 17, 2011the only change that survived power cycling is the change of default password that it forced me to do.
View 2 Replies View RelatedCisco Switches :: Sg300-28 - Factory Reset After Power Off?
Jul 10, 2012I use Cisco switch sg300-28. When i turn it off and turn on, it reset to factory reset include login password, dose it normal operation or I miss anything?
View 2 Replies View RelatedCisco Switches :: Does SG500X Support Redundant Power Supply
Jun 1, 2013Does SG500X support the following
redundant Power Supply?PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense mode?Layer 4 prioritization: enables prioritization based on TCP/UDP port numbersUni-Directional Link Detection (UDLD) — monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices
Cisco Switches :: Not All SG300 Ports Supplying Inline Power?
Feb 26, 2012Essentially, not all ports on our brand new SG300-28P switches provide Inline Power to our older 7900 series phones. I can connect the phone a couple ports down and it usually powers up, but not always. Often I can also connect an 802.3af device to one of the troublesome ports and it will received power, however I am noticing there are some ports that now refuse to supply PoE at all?
This is equipment that has been running perfectly fine for several years now, on C3524 PWR XL switches. I can also tell you that this is not isolated to one switch, but all 5 of our SG300 access switches. And, yes, the firmware has been updated to 1.1.2.0.
Cisco Switches :: SG 200-08 All LED Lights Flashing Green After Power Failure
May 5, 2012Thinking back, about a month ago I updated the firmware (I can't check version at the moment). The switch has been working fine since then. Today I needed to move some power cables and the switch lost power. Now ALL of the LED lights are flashing green and I can't access the switch. I've tried setting a static IP on my laptop to 192.168.1.20, mask 255.255.255.0, and accessing the switch on 192.168.1.254, but there's no response. I've tried holding in the reset button for at least 30 seconds while the switch is powered on, AND while powering it on. None of that has worked. Also when I first power it on, the system LED flashes orange very quickly for a second or so, then all of the LEDS start flashing green.
View 5 Replies View RelatedCisco Switches :: Maximum PoE Power Of SG100D-8P Unmanaged Switch?
Apr 22, 2012how many PoE power from SG100D-8P ? its all 8 port support PoE ?
View 12 Replies View RelatedRouters / Switches :: EnGenius M5000 AP - Power On But No Signal?
Apr 12, 2011I connected an EnGenius M5000 AP/Bridge to a switch, a Modem (VSAT) is also connect to the switch and aslo my Desktop standalone PC. All instructions were followed to install the EnGenius M5000. However, only the Power,Lan, and Wan light indicators are on but the Link/Signal indicators - red, yellow and green are not coming on.I tried pinging 192.168.1.1 according to the default IP address, but still there was no responds. Even I tried resetting it on the firmware, but it can not ping
View 2 Replies View RelatedCisco Switching/Routing :: Power Series Cabling On 3750 Switches?
Oct 22, 2012I am connecting power cable (series power cables) on 3750 stacks. i have connected them the same way the stack cables are connected i.e. fo rexample on a stack with 3 3750s:
1- fitst slot on fist switch connected the second slot last switch in the stack.
2- second slot/ port on the first switch to the first on second and seoncd on teh second switch to first on the third switch.
this how they are alway been stacked.Now, I need to connect power cables and I have followed the same method for stacks up to 4 switches. it seems that if a stack has more tham 4 switches, then the cabling will be dofferent!?I was wondering what will be on the cabling scheme for stacks more than 4 switches.
Cisco Switching/Routing :: 3750X Setting Up Power Stacking Switches
Dec 27, 2012I'm trying to get some clarity on power stacking 3750X switches. I have a new stack of 6 switches. I know I can only have 4 in a power stack and all 6 in the data stack with a max of 8. I'm trying to find the proper way to connect the power stack cables for the 4 switch power stack.
View 1 Replies View RelatedCisco Switching/Routing :: 3750X - 48PS Switches Power Stacking
Mar 28, 2012In my office we bought 7 cisco 3750X - 48PS switches. We configured Data Stacking between those switches. We also want to configure Power Stacking between those 7 devices.
I found in the Data Sheet that we can only configure 4 devices in power stacking at a time. If it is like that how to configure the rest of 3 devices. Need configuring power stacking between those devices in a better way..
power stack cable part no we have is
CAB-SPWR-30CM
