Cisco Switching/Routing :: 3750X Setting Up Power Stacking Switches

Dec 27, 2012

I'm trying to get some clarity on power stacking 3750X switches. I have a new stack of 6 switches. I know I can only have 4 in a power stack and all 6 in the data stack with a max of 8. I'm trying to find the proper way to connect the power stack cables for the 4 switch power stack.

View 1 Replies


ADVERTISEMENT

Cisco Switching/Routing :: 3750X - 48PS Switches Power Stacking

Mar 28, 2012

In my office we bought 7 cisco 3750X - 48PS switches. We configured Data Stacking between those switches. We also want to configure Power Stacking between those 7 devices.
 
I found in the Data Sheet that we can only configure 4 devices in power stacking at a time. If it is like that how to configure the rest of 3 devices. Need configuring power stacking between those devices in a better way..

power stack cable part no we have is
CAB-SPWR-30CM

View 2 Replies View Related

Cisco Switching/Routing :: Power Stacking For 3750x - Both Cables Needed?

Jun 7, 2012

Suppose I have a 3 member stack of 3750x switches.  Members a, b and c.I have all 3 members stacked with all 3 *data* stacking cables in a daisy-chain topology.  The 50 cm data stacking cable from switch a (on the very top) to switch c (on the very bottom) just barely reached.Of course, that means the 30 cm *power* stacking cable didn't reach between a & c.  Right now, the power stacking cable goes from a to b, and then another cable from b to c.  Leaving me with a useless extra 30 cm power stacking cable.
 
My question is, can switch "a" receive power from switch "c" through switch "b"?  Is this just a big electrical "bus"?  What if the power supply in switch "b" is removed?Just wondering if there is a need for me to get a longer power stacking cable (one of the 150 cm power stacking cables). 

View 2 Replies View Related

Cisco Switching/Routing :: Stacking 24 And 48 Port 3750X Switches Not Working?

Dec 11, 2012

We purchased a number of 3750X 48 and 24 port switches for the College Campus. Am finally getting around to getting them inserted on the network. Working with a WS-3750X-48PF-S and a WS-3750X-24P-L. Have them stacked with the 10Gb uplink on the 48 port switch. Have not been having fun.In the boot sequence, the switches recognize they are stacked, but as soon as they finish boot, I get the message on the 48 port switch: “Stack Port 1 Switch 1 has changed to state down.” Then “Stack Port 2 Switch1 has changed to state down.” Am noticing that I have a message preceding that: “Major version mismatch with stack neighbor.”The 48 port is running c3750e-universalk9-mz.150-1.SE3, HBOOT 12.2(53r)SE2.The 24 port is running c3750e-unversalk9-mz.122-55.SE3, HBOOT 12.2(53r)SE2Most of our 3750X and older switches are running 122-55 or 122.58 code. IP base or Universal. There is speculation that the problem is the 24 Port is Lan base, as the part number might indicate. (WS-C3750X-24-P-L.... I think that is the part number) and the 48 is IP base. Both switches are Universal, and my understanding is that they don't care about LAN or IP Base until you enable a function that falls in the IP Base domain. Then I have to call Cisco Licensing.For these switches, LAN Base is fine, based on the boot message, I feel the real problem is 122-55 versus 150-1 in the stack. So.. the question is: Do I downgrade the 48 port to match what we have in our environment, and what is on the 24 port switch. Or... Upgrade the 24 port switch to match the 48 port switch and have an installation that is not consistent with our environment? I do have two more edge closets to install with this purchase of 3750X 48 port switches.

View 2 Replies View Related

Cisco Switching/Routing :: Stacking With 3750X?

Jan 1, 2013

There seems to be a lot of conflicting information on what can and can't stack together in the 3750X range.
 
I know that LAN Base can only stack with other LAN Base switches.
 
Can IP Base stack with IP services in 3750X? I have also heard that the 15.x.x IOS restricts mixed feature set stacks?
 
I know that Cisco recommends that all switches in a stack have the same IOS and feature set but having all IP Services in a stack can get too expensive.

View 6 Replies View Related

Cisco Switching/Routing :: 3750X And 3750 Stacking Together

Nov 1, 2012

I have two WS-C3750-48PS-S switches and I need to add two more.  The new part number I am looking at is WS-C3750X-48P-S will these all stack together ?

View 2 Replies View Related

Cisco Switching/Routing :: Stacking 3750X With 3750G?

Apr 22, 2013

I have one 3750X with C3KX-NM-10GT, I need to interconnect using stackwise to 3750G-24TS. The 3750X needs IOS 15.0(1) to use C3KX-NM-10GT, and the latest IOS for 3750G-24TS is 12.2.55. How can I interconnect them using diferent IOS?

View 2 Replies View Related

Cisco Switching/Routing :: Stacking A 3750X With 3750Gs

Jan 23, 2013

We currently have a stack of 3750G switches that are running 12.2(46)SE C3750-ADVIPSERVICESK9-M
 
Our 3750X is currently running 15.0(2)SE C3750E-UNIVERSALK9-M and I believe we were told you can't stack with a Universal IOS image. We have the universal on there because we have some 10GB fiber connections on it that Cisco told us wouldn't work otherwise.
 
I realize that the switch versions need to match, but the question is, which version should we work off to have use of the 10GB SFP card?

View 9 Replies View Related

Cisco Switching/Routing :: Stacking Switch 3750E And 3750X?

Oct 3, 2012

can I make the stacking of these two switches WS-C3750E-48PD-SF and WS-C3750X-48PF-L. Both have universal IOS.

View 11 Replies View Related

Cisco Switching/Routing :: Catalyst 3750X Stacking Convergence Time?

Nov 14, 2011

convergence time in case of stack master will be switched over to other switch.In my understating, when the stack master will be switched over to other switch based on election algorithm, convergence time will be less than 10 second.
 
I tried to calculate concersion time during fail over testing but convergence time was 21 second. I think it is too long...

Expected reasons

・I configured Rapid Spanning tree protocol between L3 and L3. (But RSTP's convergence time is 2~3 second..)

View 4 Replies View Related

Cisco Switching/Routing :: 3750x Remove Stacking Option On Sunday For Testing

May 2, 2013

is it easy to remove the 3750x stacking?  i'd like to test one of them on a sunday and keep the other one on production.  it's just two stack of 3750x, is it hard and do i really need to remove the cables on the back?
 
basically i need to put a different config for my testing, i gues i need to remove the cables right?  and put it back on the stack before monday.

View 2 Replies View Related

Cisco Switching/Routing :: Stacking 3750g And 3750x - Hardware Version Mismatched

Jul 18, 2012

I am trying to stack a 3750g with a 3750x. At the moment they will not stack with their current IOS as the hardware version is mismatched.
 
According to various posts this is possible as long as the same IOS is in use. The following IOS are currently in use:
 
3750g     -     c3750-ipbaselmk9-tar.122-55.SE5
3750x     -     c3750e-ipbasek9-mz.150-1.SE3
 
I have tried to downgrade the IOS on the 'X' to 122-55.SE5 however, i get errors regarding firmware incompatibility.
 
I am unable to upgrade the IOS on the 'G' to 150-1.SE3, as the size of the IOS image is larger than the available flash (Version 15 IOS for the 3750G (c3750-ipbasek9-mz.150-1.SE3.bin) is 16,074,189 bytes whereas the 3750G has 16MB of flash memory or 15,998,976 bytes total which mean the IOS will not fit).
 
Has not actually stacked these devices successfully? I understand there may be license implications of upgrading to 15 but at the moment I just want them to stack!

View 7 Replies View Related

Cisco Switching/Routing :: Stack-power 3750x / FRU Power Supply Is Not Responding

Sep 4, 2012

After stacking two 3750X switches, with four equal power-supply's, with StackWise and PowerStack , still got the next message every few hours %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding (gn4m-rt1p08-04-2)( note that the message revers to the second switch in the stack ) although the stackwise and powerstack on the switches is oke and are working correctly. !
 
Config  : Stack-power in power-sharing mode/strict With CLI on the switch : All the power supply's and stack-power details, prio look OK.
 
Only: LMS prime /inventory/cisco-view/configure/power supply status  result :  some power supply's are marked as disabled.with the command  > power supply 2 slot a off/on I manage to get the status back to "normal", but after a few hours some power supply's are again marked as "disabled".
 
Looks like SNMP en IOS difference from opinion.
 
Hardware
WS-C3750X-24S-S
C3KX-PWR-350WAC
 
Software
15.0(2)SE
C3750E-UNIVERSALK9-M

View 5 Replies View Related

Cisco Switching/Routing :: 3750X Stand Alone Secondary Power Supply Act As Pool Of Power

Apr 4, 2012

In a stand alone 3750x switch configuration, can the secondary power supply only act as a redundant power supply (active/standby), or can it become a "pool" of power similar to power sharing mode for StackPower (somewhat active/active)?  I understand there is no stack involved here but I'm curious if this functionality is possible.

View 1 Replies View Related

Cisco Switching/Routing :: Downgrade 3750X With IP Base To LAN Base For Stacking

May 6, 2012

I have a WS-C3750X-12S-S (IP Services) that I THINK I'd like to downgrade to LAN Base so I can stack it with a WS-C3750X-48T-L that is already LAN Base..

View 4 Replies View Related

Cisco Switching/Routing :: 3750X Power Needs For PoE

Mar 21, 2013

I am building a switch stack using 4 48 port 3750X switches that will also have the power stacked.  If I install a single 715W power supply in each switch will the stack support 802.3af accross all 48 ports on each switch?  My calculations are 48 ports x 15.4W which gives me almost 740W needed which is over hte 715W power supply.  I was reading somewhere were it mentioned that in a powerstack additional power can be drawn from the stack.  I know this will not work if you are trying to support power on all switches accross all ports but would it if say 2 of the 4 switches are needing to provide PoE accross all 48 ports?  If I say we can only use 24 ports per switch for PoE that drops the power need down to 370W which I believe should work.  Just trying to get a better understanding of PoE consumption.  Would the best solution be to just add a second power supply to each switch?

View 8 Replies View Related

Cisco Switching/Routing :: Stacking 2960S Switches Options?

Oct 10, 2012

I have 2  Catalyst 2960S (24 ports and 48 ports). Can I stack them using the Uplink connection instead of the stack modules. I know Stack module is the best option but it is kind of expensives (half price of the 24 ports switch) and I only need to stack no more then 2 switches.

View 4 Replies View Related

Cisco Switching/Routing :: Power Supplies In Stack With 3750X

Mar 12, 2012

I have two WS-C3750X-48PF-S in stack, but every one has just one power supply. In the package of the switches is included one stack power supply cable.does it make sense to use stack power cable if every switch has just one power supply ??

View 6 Replies View Related

Cisco Switching/Routing :: 3750X / 3560X - Power Cord For PDU?

Aug 28, 2011

Is the CAB-C15-CBN - Cabinet Jumper Power Cord, 250 VAC 13A, C14-C15 Connector, supported on the Cisco Catalyst 3750X/3560X. I need to plug the switches into a UPS PDU, that requires a C14 plug.

View 2 Replies View Related

Cisco Switching/Routing :: Finding Specification For 3750x PoE Power Supply?

Jul 11, 2012

Looking at the specs for the 3750 power supply - is the WS-C3750X-48P-S model with the 715W power supply referring to the amount for both power supplies per switch or just one power supply per switch? Meaning, is the 715 a accumulative number or, just the watts of one power supply. I would like to purchase a 3750x PoE switch with redundant power supplies. If this model is not the correct one?give me the model that offers 48 port PoE with redundant power supplies?

View 6 Replies View Related

Cisco Switching/Routing :: 3750X Stack Power Limitation With Non-POE Switch?

Oct 28, 2012

We have 9 x 3750x switches with 5-nonPOE and 5-POE. There is a limitation with 4 POE per stack with Stack Power.
 
Can we combine all 9 to one stack since there are only 4 POE?
 
Or, is the 4-switch limitation applied regardless if they are mixed with POE and non-POE?

View 7 Replies View Related

Cisco Switching/Routing :: Enable Second Power Supply On 3750x Switch

Nov 6, 2012

I have a 3750x 48port POE switch that I installed a second power supply in. But it doesnt power on. Am I supposed to enable it in the switch somewhere? I've plugged it into a couple different outlets so I know that's not the problem.

View 4 Replies View Related

Cisco Switching/Routing :: Catalyst 3750X With PoE Secondary Power Supply Options?

Jul 21, 2012

When quoting a Catalyst 3750X with PoE (WS-C3750X-48P-E) the Dynamic Configurator Tool allows to include as the secondary power supply option the Catalyst 3K-X 350W AC Secondary Power Supply (C3KX-PWR-350WAC/2), but the default included primary power supply is the Catalyst 3K-X 715W AC Power Supply (C3KX-PWR-715WAC). My questions are the following:
 
1. Will this combination of power supply work?

2. Will the C3KX-PWR-350WAC/2 be able to power up the switch if the primary power supply of 715W fails?

3. Will the PoE will be lost if the primary power supply fails and only the secondary power supply of 350W keeps working?

4. If this secondary power supply of 350W is not suitable for PoE, why it is available as a secondary power supply option in the Dynamic Configurator Tool for a PoE switch?

View 4 Replies View Related

Cisco Switching/Routing :: 3750x - Plug In Powerstack Cables With Switch Power Applied?

Mar 13, 2013

I have a customer that has a stack of 3750x switches installed in production and now would like to install the powerstack cables. The switches are in production and downtime would like to be avoided. Can you install the powerstack cables with the switches powered up? I would assume you can, but wanted to verify before doing so.

View 4 Replies View Related

Cisco Switching/Routing :: Configuring Stack-power On A 3750X Stack?

Oct 31, 2012

I have 3 switches in my 3750 X stack. I am getting the following error in the logs:  %PLATFORM_STACKPOWER-4-PRIO_CONFLICT: Switch 1's power stack has conflicting power priorities.  Not sure what I should do next. Below is my Stack-power configuration:
 
Power stack name: Powerstack-1    Stack mode: Power sharing    Stack topology: Ring    Switch 1:        Power budget: 735        Low port priority value: 20        High port priority value: 10        Switch priority value: 2        Port 1 status: Connected        Port 2 status: Connected        Neighbor on port 1: c464.1308.7900        Neighbor on port 2: e8b7.4827.e680
    Switch 3:        Power budget: 729        Low port priority value: 22        High port priority value: 13        Switch priority value: 4        Port 1 status: Connected        Port 2 status: Connected        Neighbor on port 1: 2894.0fd9.9f00        Neighbor on port 2: 2894.0fd8.e200
    Switch 2:        Power budget: 690        Low port priority value: 21        High port priority value: 12        Switch priority value: 3        Port 1 status: Connected        Port 2 status: Connected        Neighbor on port 1: 2894.0fd8.e200        Neighbor on port 2: c464.1308.7900
 
Each switch has its own 715W power supply in it and all check out OK.

View 3 Replies View Related

Cisco Switching/Routing :: 3750x Implementing Macsec Between Two Switches

Aug 19, 2012

Can I implement MACsec betwen two Cisoc 3750X using the  C3KX-NM-1G? 3750x (C3KX-NM-1G) -------------------MMF------------------(C3KX-NM-1G) 3750x.

View 1 Replies View Related

Cisco Switching/Routing :: ASA And 3750x Switches - How To Get VLans Working

Jan 25, 2012

How to get vlans working properly between sub-interfaces on a ASA and a trunk port on a switch.There seems to be issue with the VLAN's being assigned to the correct VLAN and this information being properly sent to the ASA over the trunk.
 
We seem to be unable to ping most of the interfaces except for one on the switch. Sometimes if we are lucky we are able to ping a host on a different vlan that is on the switch. This seems sparadic at best.
 
Logs on the ASA show traffic does not seem to be assigned properly to the correct sub interface. We have access rules on the ASA disallowing traffic not part of the same vlan. For example you will see networkA blocked on networkB when it really should be directed through networkA's sub interface.
 
Any example commands for the ASA and Switch for at least the basic requirements to enable all the VLAN's to communicate properly with the ASA?

View 5 Replies View Related

Cisco Switching/Routing :: Possible To Do LACP Using 2 X 10GB Between 3750X / 2960S Switches

Sep 4, 2012

I need to know if is possible to do a LACP using  2 x 10GB between 3750X and 2960S (WS-C2960S-48LPD-L) switches.

View 1 Replies View Related

Cisco Switching/Routing :: Difference Between IP Base And Universal For 3750X Switches?

Apr 9, 2013

What is the difference between IP Base and Universal for 3750X switches?

View 2 Replies View Related

Cisco Switching/Routing :: 3750X / IP Base And IP Services Stackable Switches?

Aug 16, 2012

I'm building a wired closet to aggregate user's connections, Im planning to have 5x 3750X stacked switches and there is a need to run EIGRP, I'm thinking to order one switch with IP service image while the rest will run IP base image, is it workable scenario and what are the drawbacks of such combination of images ?  

View 5 Replies View Related

Cisco Switching/Routing :: 3750x Stacked Switches With Latest Firmware

Feb 25, 2013

I have two 3750x stacked switches , both with the latest firmware on them. I enter the configuration onto one switch and it obviously copies over onto the other switch. Although in the configuration I have both a console username and password and an enable password, when I try to log onto the initial switch that I entered the configuration on, I am prompted for a username and password, which works fine, but when I try to enter enable mode i get an error stating that no password has been set. However when logging onto the other switch I am not prompted for a username or password but when I try to enter enable mode I am prompted for a password and can access it with no problems.

View 1 Replies View Related

Cisco Switching/Routing :: 3750x / Stackpower Switches Show In Standalone Mode?

May 29, 2013

I have a stack of 8 3750x switches connected via Stackwise.  In addition, I have these switches configured as two Powerstacks. When I look at the Powerstacks, they are showing as being in power-sharing mode.  When I look at the individual switches, they show as standalone.   Right now, I have 1 switch in each powerstack that has two power supplies, and then the other three have a single power supply. Below is the output for "Show stack-power detail" as well as the Powerstack configurations.
 
Power Stack           Stack   Stack    Total   Rsvd    Alloc   Unused  Num  NumName                  Mode    Topolgy  Pwr(W)  Pwr(W)  Pwr(W)  Pwr(W)  SW   PS--------------------  ------  -------  ------  ------  ------  ------  ---  ---Powerstack_1          SP-PS   Ring     2145    45      570     1530    3    3Powerstack_2          SP-PS   Ring     2860    60      760     2040    4    4Powerstack_1-1        SP-PS   Stndaln  1430    520     190     720     1    2
Power stack name: Powerstack_1    Stack mode: Power sharing    Stack topology: Ring    Switch 4:        Power budget: 700        Power allocated: 190        Low port priority value: 20        High port

[code].....

View 1 Replies View Related

Cisco Switching/Routing :: 3750X Switches Dropping Packets On Uplink Interface?

May 9, 2013

We have a remote site that is using 3750X switches as layer 2 switches back to our home site.  The uplink port is showing dropped packets but the utilization on the link is never about 10%.  We have a 100Mb circuit to this site.  Our speed tests and iperf tests are not showing any issues that we can see.  However the port is still droping packets.  It is not dropping at a high rate but they are dropping.          
  
switch#sh platform port-asic stats drop gi1/1/4
  Interface Gi1/1/4 TxQueue Drop Statistics    Queue 0      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 1      Weight 0 Frames 52876      Weight 1 Frames 2      Weight 2 Frames 0    Queue 2      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 3      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 1330874    Queue 4      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 5      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 6      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 7      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0switch#
         
Is there a way to capture these dropped packets to see what they are?  We do have VOIP phones at the site and are using Qos.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved